Tablet Stand

No video

Tablet Stand - DIY

Рет қаралды 120,953

Ronald Walters

7 жыл бұрын

Easy to make stand for small tablet... Samsung Galaxy Tab 4 shown.

Пікірлер: 71

@TheChipmunk2008 7 жыл бұрын

I am subscribed to many many woodworking channels but have no real ability... but this, so simple, yet elegant, might just have a go!

@howardbecdove9780 7 жыл бұрын

Hi Ron This is a great little "stocking filler" for Christmas. Intend to make at least five. Your detail on such a small project is much appreciated. I'm still a newbie and it's fantastic to find a project that's not intimidating. Greetings from Sydney, Australia.

@ralphb.3802 3 жыл бұрын

Great video. I like that you gave measurements and instructions as you went along. I was looking for a project for a gift, I made one from wood in my scrap bucket. I like the design and the contrast between the light and dark wood. Simple and elegant. Thanks.

@azyfloof 7 жыл бұрын

Very nice, Ronald! Super fancy :) As an added bonus, drill a blind hole in the bottom with a forstner bit and sink in a 1/4" 20 threaded nut. Now you have a tripod mount! :D

@JeremyCook 7 жыл бұрын

Clever, what do you mean "sink in?" Glue, or are you talking about pressing it in and using interference to keep it there?

@gwheyduke 3 жыл бұрын

Great video, going to have to make a couple of those!

@SawDustMakerRJM 7 жыл бұрын

Really nice design. Great job Ron.

@richardebbole1 7 жыл бұрын

we're checking you out Ronald... all in good fun

@IsaacFloresGarcia 7 жыл бұрын

Heyy!!!! Muchas gracias por compartir. Excelente trabajo!!

@mDiago6200 2 жыл бұрын

Wow! This is so nice, simple and functional. I want one.

@danalaniz7314 3 жыл бұрын

The end product is really nice! Thanks for all the exact instructions, measurements and tips. In my opinion your video is absolutely one of the best I have seen for a tablet stand or really for any wood working project. I'm just a beginner and I've watched around 50 project videos in the last few weeks. Most lack measurements, basic instructions and tips. Some don't include a narration at all. I will definitely subscribe and check out your other videos. Thanks for posting.

@RonaldWalters2010 3 жыл бұрын

Thank you very much! Ron

@JeremyCook 7 жыл бұрын

Very nice work. Maybe I'll make something similar for my cell phone!

@SNC2319 7 жыл бұрын

That looks similar to what I’ve been building, Great minds think alike.

@BronkBuilt 6 жыл бұрын

Nice job. Looks really nice.

@Sascha_1977 7 жыл бұрын

just simple, clever and smart 👍

@deminshine1 7 жыл бұрын

Great tip with the washers thanks :)

@holee2319 3 жыл бұрын

This is by far the best and easiest design! Thanks, I made several today inspired by yours.

@RonaldWalters2010 3 жыл бұрын

Glad you liked it. Thanks for watching. Please subscribe. That is what keeps this channel running. Ron

@larsvargas 2 жыл бұрын

@@RonaldWalters2010 it really is the easiest design, I watched all the other videos! Subscribed!

@RonaldWalters2010 2 жыл бұрын

Glad you liked it. Thanks for watching... and subscribing! Ron

@thehasanrohat 6 жыл бұрын

Nice work

@jorgenelsonperezzapataq7948 4 жыл бұрын

BUENAS TARDES EXCELENTE TRABAJO .LINDAS HERRAMIENTAS FELICITACIONES DES DE COLOMBIA

@jeucedahn 2 жыл бұрын

Really good looking stand. Thanks for the measurements and instructions I made one myself for my daughterand it is really awesome, she loves it. Thanks man!

@RonaldWalters2010 2 жыл бұрын

Glad I could help! Thanks for watching. Please subscribe. That's what keeps this channel going! Ron

@campbejouc 7 жыл бұрын

nice work

@joewelling3278 6 жыл бұрын

Ron, I enjoyed your video and it inspired me to make some for some close friends and family for the holidays

@RonaldWalters2010 6 жыл бұрын

I'm sure the recipients will find them very useful. They be appreciated even more because they were handmade by you.

@geoffkoroi3755 3 жыл бұрын

I love your videos. This is clear.

@RonaldWalters2010 3 жыл бұрын

Glad you like them! Thanks for watching. Please subscribe. That's what keeps this channel going! Ron

@MaxSnelling47 7 жыл бұрын

Simple, cheap and durable (unlike plastic).

@malikjunaid1 7 жыл бұрын

something most needed when I am relaxing, but would love to have possibility of multiple tilt levels and a mechanism to grip the tab.

@RonaldWalters2010 7 жыл бұрын

Really intended for someone (my wife) laying in bed watching a movie, so if it falls over no harm... but it is quite stable. One tilt angle fits all. :-)

@thomassmith4616 4 жыл бұрын

I made all the parts last night, researched Kindle thickness 0.4, getting Kindle in few days, adjusting the front support for 1/2 inch. adjust the parts for your customization, only screwing the back upright support in until I see how the Kindle fits before gluing.

@luispalacios6858 3 жыл бұрын

Muy bueno fabrique 4 y los vendi al final me siguieron pidiendo y sigo fabricando gracias por enseñarlo soy de chile un saludo afectuoso my name is luis

@RonaldWalters2010 3 жыл бұрын

Hello Luis. Thank you for watching and your comment. Please subscribe. That is what keeps this channel running. Ron

@BigWingUK 7 жыл бұрын

You seem to have a heck of a wobble on your drill bit! Is the bit slightly bent?

@RonaldWalters2010 7 жыл бұрын

I knew someone would say something about that. :-) Fairly annoying! Brand new out of the box hex shank drill bit from Lee Valley. Wasn't a very critical hole and I was too lazy to edit it out.

@luispalacios6858 3 жыл бұрын

Hello my friend ya me suscribi cuidate mucho saludos de mi pais santiago de chile un abraso

@bhimkumarsharma5315 7 жыл бұрын

nice wark

@DIYwithsiliconemoldsworldwide 3 жыл бұрын

Great

@delialeonortorres7150 3 жыл бұрын

👏🏻👏🏻👏🏻👍👍👍👍

@soonersciencenerd383 7 жыл бұрын

nice stand, nice handywork, but the wobble..... do you use anything to keep your stand from "migrating" around your table? im going to make something like this, using my scrap basswood.

@RonaldWalters2010 7 жыл бұрын

There is no wobble. You could use 4 self adhesive silicone feet on the bottom. I call them fish eyes.

@soonersciencenerd383 7 жыл бұрын

didn't know. i just started woodworking, using non-electric tools, trying to learn the basics.

@sonamsingh101 6 жыл бұрын

Can i use card board,and glue to make one like this? Please reply soon...thanks.

@RonaldWalters2010 6 жыл бұрын

You can but it may not last very long.

@thomassmith4616 4 жыл бұрын

I checked the fit for 10 inch Kindle on this plan, going to lengthen the base and deeper front to back to have the upright twice as high, I will send photo and math to keep the 22.5 angle, some day.

@ElCidPhysics90 2 жыл бұрын

Appreciate the measurements. In retrospect do you think the glue would have been strong enough or are the screws necessary?

@RonaldWalters2010 2 жыл бұрын

I used Baltic Birch Plywood and the veneer can be pretty thin. Even with solid wood, if the item is dropped (and it probably will be) it can pop loose. The glue holds it in place allowing easy insertion of the screws. Then it is there to stay. Thanks for watching and for your comments. Please subscribe! That is what keeps this channel going. Ron

@ElCidPhysics90 2 жыл бұрын

@@RonaldWalters2010 thanks for the quick reply. Will subscribe rn

@phil4543 5 жыл бұрын

👍

@taranagnew436 7 жыл бұрын

will it work for a samsung tablet?

@RonaldWalters2010 7 жыл бұрын

You have been told it works for a Samsung Galaxy Tab 4. You have the dimensions of the stand. Measure your unit and figure it out.

@mcconvilleliam501 2 ай бұрын

where did you buy the round over bit

@RonaldWalters2010 2 ай бұрын

Wherever they sell router bits. Common item.

@thomassmith4616 4 жыл бұрын

You must have used A/C grade, I did one with CDX and have rough top, I could use orbital sander.

@RonaldWalters2010 4 жыл бұрын

Construction grade plywood is not very good. MDF would probably be a better choice. I used Baltic Birch Plywood. It has more plies that construction grade, both sides are good, the glue is better, it is flat and has nearly zero voids.

@thomassmith4616 4 жыл бұрын

@@RonaldWalters2010 I scrapped the plywood and did the base and upright with Zebrawood and Purple Heart for the front bar.

@taranagnew436 6 жыл бұрын

Can you use wood from a tree and what can you use to round out the edges if you don't have the machine the rounds out the edges?

@RonaldWalters2010 6 жыл бұрын

Yes you can use wood (or plastic). Edges can be rounded by hand with a file and/or sandpaper.

@josecarlosgomesdasilvajose9338 2 жыл бұрын

quies as medidas meu amigo

@RonaldWalters2010 2 жыл бұрын

Watch the video. Dimensions (in inches) are clearly given throughout the video... although a couple of them may be stated in English. The width of the 1/2" plywood being cut on the table saw is 3-1/2". Thanks for watching. Ron