Your video was a lifesaver for me. I found the instructions a bit tricky, but your video offers a crystal clear explanation about how to use it and how to clean it. Thanks a lot man

I just received one of these units and in the process of doing a dry run on assembly and reassembly I found I couldn't get the nylon 'needle' out and before I broke something, I though let's see if anybody has had this issue. The first vid I watched didn't show any cleanup at all but I got lucky with yours. Thank you very much as now I know your expression and mine were identical when initially trying the T tool to get the paint needle out. Now I have yet tried it, and the one thing you neglected was the reinsertion of the paint needle. I also received a 4th tip with mine with a tiny brass tip and a brass paint needle (might be good for things like automotive spray or water-based polyurethane spray (which is the reason I bought it). Anyway, very good review, and probably excellent considering it's your first outing with an HVLP sprayer as it is also my first one as well. Again, thanks for a good review.

I just bought this a week ago. Im redoing my moms whole house this will save me time and it was pretty cheap. Nice in depth review

thank u for this. i bought this on a lightning deal and am painting my cabinets next week with it, the tutorial was super beneficial!

Greetings from Scotland. Lovely video! - Lovely guy!! Thanks so much, as it has helped a lot.

When spraying, you always paper and tape off any areas you don't want the paint to fog over on. Cardboard you may have laying around is fine, or newspaper, old magazine covers, etc.,. Also cutting in certain areas with a brush, bringing the brushed paint in about 4 to 6 inches, depending on the job is something important as well. Again - it just depends on the job. Lastly - on cleanup - you should always run clean water through the spayer to really get the old latex paint out of areas you cant reach, or paint thinner for oil base paints. Really good review, other than that one thing. It should always be mentioned from the get go because newbies for whatever reason dont think that one through - and leads to a mess - LoL. I was once a newbie myself (but you didnt hear that from me) heh. THANK YOU for doing this review! I just ordered one from Amazon and happened by your video and found it useful for when it arrives. I now know what to expect from it and it looks great!

The other reason to mix in a separate container is so you can pour it through a disposable filter. That keeps clumps from clogging the paint gun, and ensures smooth transfer to your painting surface. Thanks for posting this review.

That is one great video to show how to use the paint gun. Very helpful!

Thank you for this detailed review.

Nice review! I just bought this sprayer and you saved me some time.

You don’t have to remove the pin/needle. Clean the other pieces right away and then run spray hot water thru the gun to ensure it’s clean. Works like a charm and takes just a couple minutes. This thing is awesome and the overspray isn’t too bad.

I have the same gun. Very good gun. Thank you for the video. Wanted to see how the needle was removed 👍

Love them blue shop towels

I’ve had this sprayer (can’t tell you how long) I’m finally going to pull the trigger no pun. I plugged it in it works wish me luck!! I use it more for furniture flipping not walls , but I might try it

Awesome presentation - you saved me a lot of time and I purchased the Sprayer from SmileAmazon - good price for under $60

I'm getting mine Monday I'm excited

Good video Thanks for the detailed presentation

Looking forward to picking this gun up for my basement, thank you too much for the review :)

Hi sir thank u for the video, in addition to many effective comments, one thing, u have to take off the the spray filter after painting to clean it too

Awesome video, felt like I was there with you learning to use it.

Mine has a 1.0mm spray tip for accuracy with a 1.0 mm nozzle for accurate spray...the gray one is for fine detail

Great job. youtube needs presentations like this..tests saves people money.

Thank you. This helped a lot.

All paint spraying solutions have the issue with overspray, HVLP like this, compressor, even rattle cans...just something you have to plan for. For cleanup of sprayers with latex, do it immediately and a bucket of warm soapy water to drop all the bits and bobs into as you disassemble the sprayer makes cleanup much easier.

Watching your video was better than the instructions. I was surprised how much I needed to thin the latex paint. I just put my first coat on some interior doors. 4 doors first coat on one side took a full container. In the future I will thin out the gallon of paint and not by batch so I don't have to custom mix each batch. The gun did splatter more than I hoped but I think it will look good with 2 coats of paint.

I just got this gun. This video was very helpful. Question about the air intake filter. I'm not sure if I missed it in the video, but I can't seem to find anything on replacing it anywhere online or where I can get replacement filters. It's like this filter does not exist.

Nice detailed review

Great video, thank you! I (believe) I have followed all instructions for set up. I wanted to do a test run with water. I filled the container just over half way but nothing is coming out except for air. Any ideas on why this is happening?

Ur video is extremely helpfull, thanks, however please could u let us know what is the use of 3 different coloured round knobs attachments in front and what's the use for the copper pin ??

great video as bought one yesterday and didnt wanna read instructions

Was considering to buy this or a electric hvlp but thanks for confirming that I shouldn't for higher quality work. Many strangely suggest these create less overspray but I see airless is #1 in spraying & coverage with minimal overspray, but even better when driven with high end pump with high air flow but precise or even a hvlp automotive sytem spray gun with compressed air. That research is finally over so I don't put less than perfect finishes down. small detail work may be left for a high volume fan tip airbrush though & a perfect covering type spray paint.

Not bad but the gray tip is the 1.0mm nozzle size (smallest size) and to work correctly requires the gray spray tip (not the white one). Hint the two gray tips go together (spray tip and nozzle).

Bought this recently. Wow what a "throttle" it has. I'm painting bi fold louver doors and cant get it to layer easily like I used to with a lacquer or enamel gun. If I could back down the air flow, it would suit this particular job. But you're right, it's for projects that demand big and quick volume.

Nice video. I don't think I'd use one of these. It's looks like better version of the Wagner hand held sprayer. Ok for little jobs. I have an X5 airless sprayer - lower end but great quality. Cleaning is very simple, and it uses standard tips. It did cost $300, so a bit pricey for projects. I've done a number of houses, rooms, and also cabinets.

I just got mine last week and have been painting my basement today. Unless they changed something, I'm not getting too much spray out while doing close up spots. I'm actually on a break from painting and wanted to see if it was easy cleanup. Looks like it is. The manual says to spray soapy water, then plain water through. But, glad your way worked out well. Let's me know cleanup is easy.

Thank you from France

I have recently bought a Ginour 600w paint sprayer it comes with 4 different size nozzles, What is the viscosity flow rate (Din/s) for each of the 4 different nozzle sizes, As this information is not covered in the supplied manual

First, clean the reservoir then add some spirit/alcohol into it and spray for a couple of seconds. The whole system will be cleaned.

great vid keep going

Hello, first thanks for the video, second, I lost de pin, do you know where i can find a replacement???

how long can we spray at a time when we use electric spray gun?

Thanks good and informative. Perhaps a big bucket of soapy water you need to get those items in the water as fast as possible after you finish using.

That little metal needle "thingy" is the needle you use with the brass nozzle. Use the plastic needle for the other nozzles. The brass nozzle is for your detail jobs or I use it on furniture. The plastic tube is to clean out the ends of the nozzles. Good video but I'd add those small details because it's really helpful to know. Believe me, I learned through time and trial. Great gun for the money.

Great tutorial 💯🙏👍👏

hello, Nice video, but things are missing (Paints for wood, metals, .. Demonstration ...) to clean well inside nozzles you can use thinner thinner No or Yes You can ruin, wear out the plastic over time ? and using color for metal, wood, paints, to clean well always inside nozzles and other with water you can not. What do we use ?? Thank you Good day Andrea

That funnel thing is called a viscosity cup. Its used to determine the viscosity of the paint

how do I remove the white spray tip? I got the tip key as well but it doesn't come off

CAN IT BE USED WITH OIL BASED PAINTS FOR OUTDOORS

Would it not be easier to just spray a half container of lukewarm water through the unit and then disassemble for final cleaning? Great video btw!

Can you use oil base paint? Or, Tacklife SGP15AC was made only for water paint?

Go to 18:40 for the "In Conclusion" portion of the review

Good video ,what amount of water did you use to thin the paint, add 30%water

do you know how to clean well the white internal pin, which is extracted, from color to varnish to wood, iron ... ??? with the pin supplied for cleaning does not fit well ....

ey there can it b used to paint galvinize. steel or any metal ? n can it also be used outdoor or only indoors?

Can I use soap in it?

I also have the same problem with my unit,it it is brand new and I don't know how to get it to work Could someone help me with this problem thank you.

I don't know why mine dont want to throw paint my gun just throw air and I don't how to fix it I tried everything can you help me please

I have actually bought one...honest opinion..roller bits it so far..Painting for 10min with 1 kg paint in hand is not comfortable..sprays very slow .only good thing about it is to use it for furniture but honestly painting a wall takes ages...do not buy it if you think you will paint it fast..I think the person who says is amazing tool never painted professionally.If i advice someone to spray fast and efficient buy wagner or graco (pump on the floor only gun in hand)

Would I be able to used thinned artists acrylic paint with the gun?

ingin sekali beli, tp di indonesia kok belum ada ya??caranya gmn klo mau beli di indonesia

i have a heating problem...it is heavy heating....please tell me the solution

Looks like an okay unit for the price.

Is this sprayer good for lacquer, oils, stains, poly, and other clear finishes?

Can we paint car?

Is there some trick to changing the nozzle? I wanted to change to another size and I have to push it in really hard to tighten it back down. When I do get it tightened, the trigger doesn't work so I'm not getting any paint. What am I missing?

What about the cleaning of the spray gun filter ?

Someone managed to extract the pin with the accessory supplied? I can not do it with the supplied piece by following the instructions in the manual.

I just bought this gun & I'm having a lot of paint dripping out of the canister around the seal. Am I doing something wrong?

Pull hard. 😂😂😂😂 I feel for some people not strong enough to do it.

It's called a viscosity cup.

The word you were looking for is "viscosity".

you can use thinner-diluent to clean the jets-injectors internal sprayers, and tubes painted paints for wood, iron ... you show me to clean the part of the inner white injector, with a pin? thank you Hello

Great video and I never comment on anything

can I paint kitchen cabinet doors with this, if so what nozzle size?

How the hell do you get the plastic spray tip out?

i want that, how much?

This paint machine is awesome but one problem nozzle is not available ine damaging

My spray gun will not draw up the paint can you suggest a reason why.

Just trying to get mine to work, it won’t spray anything at all! Any ideas???

Viscosity measure funnel

love the video but I don't like the fact that you have to water down the paint. You will need to do additional coats to match the original thickness.

Amazon says the needle and nozzle tip are copper, but it looks plastic.

Can I use this to spray paint my car?

normally you would put plastic bag to white tray than paint..(less cleaning)

Use the gray nozzle, it's the only one with of the 3 with a metal tip and a very small hole, that one is for small detail, you just didn't try it. It would have been a lot better if you had tried this in advance to give the right information, especially if you are going to review a machine.

I bought one of these. After reading the instructions I concluded that I needed to swap the needle and the nozzle for the paint I wanted to use. No matter what I did I could not remove the needle fitted in the factory. The user manual had no instructions on how to do it. Sent it back as I felt I would end up breaking the needle, the key, the seat for the needle or possibly all three. Might have been fine if I could have used the 'default' set up. Sent it back and got a refund. Ridiculous

WTFH!!??

Stoned much?

Your technique is pretty poor. Stop arc movement of your arm. Keep the sprayer parallel to the work surface.

have you ever heard of paint thinner?!?

Do not use this gun or try to use it to paint a car

Why the hell is it that mouth breathers review a product they have no clue about? That's like us reviewing a fighter jet and comparing it to a commercial plane.

If you use a paint sprayer you need to tape off and cove everything you don’t want to get over spray on.... maybe you should do a little homework on paint sprayers. I wouldn’t want you to give out wrong info.......

Very loud

As soon as I heard that they sent you a $32 item I stopped watching. Are you seriously that cheap?

ingin sekali beli, tp di indonesia kok belum ada ya??caranya gmn klo mau beli di indonesia

ingin sekali beli, tp di indonesia kok belum ada ya??caranya gmn klo mau beli di indonesia

ingin sekali beli, tp di indonesia kok belum ada ya??caranya gmn klo mau beli di indonesia