Honda Ruckus Go Fast Kit

Honda Ruckus Go Fast Kit | Stage 2!

Рет қаралды 148,215

Жыл бұрын

Stage 2 of going "fast!" Re-jetted the carb, installed an exhaust, intake / airbox delete and even added a decompression tube.
Full build list w/ links can be found on my website - seiproductions.com/seigarage
onX Off Road - 20% off a membership!
subscribe.onxmaps.com/offroad...
runnin4tacos.com/ | Code “talonsei” | 5% off
c4fabrication.com/ | Code “talonsei” | 5% off
blackopsoffroad.com.au | Code “talonsei” | 10% off
__________________________________________________________
WEBSITE - www.seiproductions.com
PATREON - / talonsei
PODCAST - / droppingknowledgepod
INSTAGRAM - / talon_sei
FACEBOOK - / talonsei
TWITTER - / talon_sei
________________________________________________________
** DISCOUNTS **
CODE - "TALON10" for 10% off all orders | www.trayvax.com
CODE - "TALONSEI" for 20% off all orders | www.vertx.com
CODE - "TALONSEI" for 20% off all orders | www.strikeforceenergy.com
CODE - "TALONSEI" for 5% off all orders | www.skiboardsonline.com
CODE - “TALONSEI” for 10% off all orders | www.bigidesign.com
CODE - “TALONSEI” For 10% off All orders | www.drinkhoist.com
CODE - “TALONSEI” for 10% off ALL ORDERS | www.offthegridsurplus.com

Пікірлер: 163

@mikef1182 Жыл бұрын

Great series! I’m 210lbs with exact same mods and bike (same year and color too). Top speed was 47mph but average flat road speed is usually 41-44mph.

@northjerseykevin3915 Жыл бұрын

How’s the exhaust? Is it obnoxiously loud or is it OK? I’m OK with it but I don’t want to draw attention to myself.

@Allcityruckus 8 ай бұрын

2024 with just rolling wrench Evi and 5g dp sliders.. 52 top 42-45

@jasonsmith3726 Жыл бұрын

I got my first ruckus like a day or 2 before you dropped your first video on yours. I absolutely love my ruckus and rode it completely stock with the exception of cosmetic parts up until it got too cold to ride. I have been buying and installing a bunch of stuff all winter and I can’t wait until spring so I can start riding again. This video was very helpful to me for installing the intake because of how in depth you went with everything. Other videos I’ve watched just gave a general idea but you really broke it down in detail, so thank you for that!!

@happiknife7716 Жыл бұрын

Man these videos make me want to get a ruckus or grom. Love the tinkering and mod videos. Cool to see the progression of your vehicles 😎

@Mplonk13 Жыл бұрын

Never thought i would see a velocity stack on a ruckus, This has been a cool little project so far.

@matt1357111317 Жыл бұрын

I have the same mods on my ruckus, with the addition of met gears, and I have found that a good tail wind helps my top speed more than the terrain or whether or not I’m tucking

@Im_arturo Жыл бұрын

Definitely hit up rolling wrench. He’s in the Denver area.

@wesharris07 Жыл бұрын

Yup or the Ruck shop

@MosaicArtizt Жыл бұрын

Rolling wrench and the ruck shop are both amazing

@Lunarr13 Жыл бұрын

Loving these videos. Appreciate the content as always, Talon.!

@KDad514 Жыл бұрын

Been through all the off the shelf mods on my past Ruckus and they all fell short of the power I was looking for. Used as a pit bike for two race seasons. Even a big bore kit didn't get me where I wanted to be so I ended up doing a GY6 swap. It's the best performance move for the Ruck. Since moved on and we use a couple of Pitster Pro MX155s for the paddock runs.

@northjerseykevin3915 Жыл бұрын

Thanks for the video. I love the look of the intake

@roywalls5595 Жыл бұрын

I do not have a Honda Ruckus but I got a used 2007 Piaggio mp3 250Ie and did a lot of work on it! It was my first time working on this bike I flush out fuel tank and clean fuel injection & lines too! Next I replaces the belt & Variator and added Dr. pulley slider 21x17 12g & rebuilt the clutch and flush out the radiator! I upgraded light bulbs to led & new headlight bulb H1 55w! next flush out the brakes lines and grease all the bearing! Next new tires and upgrade new muffler just little more work I be done! Talon Sei

@Smallbore2wheels Жыл бұрын

Oh man. I love seeing all the noise coming out of the GET engine. At least ppl will hear you before they see you now 🤙🏼

@bultacowally Жыл бұрын

not the people in cars....

@jeffmeade5408 Жыл бұрын

Coming together nicely. I order a lot from Steady garage for my grom and they seem to have a lot for the Ruckus as well.

@750katman Жыл бұрын

Definatly drop all the plastics , just the floor plastics weigh 5lbs alone and the front fender isnt really needed unless you plan on off road or rain riding the ruck . 👍 good job im enjoying this series

@EricBandholz Жыл бұрын

Enjoying this mini-series. Great content as always Talon.

@TalonSei Жыл бұрын

Thanks brotha! Excited to hang with ya in a few weeks 👊🏻

@JFrenchRennier Жыл бұрын

Just a little bit of advice, run Michelin street tires & a performance clutch plus a performance variator face. Add a Tach which is essential in tuning. Do not be afraid of using 4.5, 4 or mixing 3 or each for a 4.2gram Slider weight average. Reason for the tach is to know you are exceeding the Rev limit setting of 8850rpms. You need to be running in the low 9000's for max speed from that 49cc motor.

@davidlockwood8703 11 ай бұрын

Up your cvt gears

@stevebricks Жыл бұрын

I’ll be doing the same. Appreciate the video and explanation.

@ABetterLifeInc Жыл бұрын

I’ve had my Ruckus for several years. Pollini variator, Yoshi exhaust but went with an oversized carburetor. I’m only 145 pounds but it maxes it out at around 48 mph. However I haven’t done the CDI yet. Maybe I’ve been lucky but on some of the group rides I’ve been on. People have done more to their scooter than me and yet mine is as fast or still faster than theirs.

@Xxlibra1018xX Жыл бұрын

Big Brain move: just get the Big Ruck! I'm sure it's not the same feeling tho. Love that Husky u got in the background there too, that's a damn nice SuMo

@adamfrbs9259 Жыл бұрын

I remember my friends dorky older brother always talking about a Yoshi pipe back in the early 90's on his sportbike....kinda hilarious they make one for mopeds now.

@ronarmstrong835 Жыл бұрын

From what Ive seen on YT, most of the big potential gains come from weight reduction and aerodynamics. Your video makes me want to find a Ruckus.

@bmhogarth Жыл бұрын

Series is great! Makes me wish I was a little more apt to this kinda stuff, mainly tuning the carburetor, that seems a little scary/tough to me. But I'm working on the variator/weights first off now. Maybe I'll grow a set and get to carb/exhaust.

@rogerhernandez9137 3 ай бұрын

So sick bro 🔥🔥 cant wait to get mine 💯💯

@stuartheafey94 Жыл бұрын

Hi bro am going to get one in UK going to mod it up too Seen Japanese Trikes from Ruckus well sweet and different great video 🔥

@dade247 Жыл бұрын

Looking into one for the heck of it :D thanks!

@JLin878787 Жыл бұрын

I love your videos and I have a 2023 Ruckus but to do all of that... To go up 5 mph and get super duper loud ... To me it's just not worth it. Thank you for showing us tho.

@joshjjjjj25 Жыл бұрын

Theruckshop has a pretty good selection of ruckus items.

@thebatlwgn Жыл бұрын

Fuck yes. I dont know why but i enjoy watching this thing get better.

@jeffreybischof315 Жыл бұрын

I like that. I may have to look into this one

@edbenson98 Жыл бұрын

I was shocked it started right up after all the work you did on the carburetor!

@TalonSei Жыл бұрын

Me too. Thought it would at least take a sec to prime with fuel again haha

@Ethan.s.. Жыл бұрын

If you want a nice 4 lb weight savings replace the battery with a lithium battery. Save a couple more pounds by putting a side stand on the bike and remove the anchor (aka center stand).

@aspence57 Жыл бұрын

you could try putting in the met gears from the metropolitan. higher top end supposedly havent done it on my ruckus. im at your version of the stage 1 tune basically with 5.5 and 5g slider mix and hit 40 all over at 250lb but im at sea level.

@chrishemming9976 Жыл бұрын

Love this! Simple fun

@ruvimzaytsev4712 Жыл бұрын

You should get in contact with rolling wrench. He is from the Denver area and makes lots of great content on modifying ruckus and other scooters. He also sells a ton of products and overall seems to have a lot of knowledge on being able to make your ruckus perform better

@Roman_Carter Жыл бұрын

Good tinkering my man

@j-stein2081 Жыл бұрын

Scooter swap shop has a good selection! You could do some variator, rollers, big bore?

@patricraty5848 Жыл бұрын

Woop woop miss Colorado and great bike I might need one

@andystoolbox 4 ай бұрын

I swapped a 100cc 2 stroke in my ruckus. It is good enough for L.A. traffic I honestly do not like taking it over 40mph with the crappy road conditions. I know it will do over 50 mph

@Redsword2581 Жыл бұрын

i wish they made these for the uk now i want one lmao they seem fun

@rickellithorpe7428 Жыл бұрын

All I did was swap out the vareator with polini with 5.6 rollers. I went from 36mph to 42mph on a good day with no wind slowing me down I can 48.

@northjerseykevin3915 Жыл бұрын

I just had flashbacks of me, putting Rinehart exhaust on my road king years ago.

@MrGdbsti05 Жыл бұрын

i will have to leave mine stock my neighbors would not like me. great video

@TheGorillafoot Жыл бұрын

Makes me miss working on bike. Not that I hate my Cars and trucks they usually are just way more involved to work on. Lighter rims would give you a little bit also.

@ksmetalfabrication5808 Жыл бұрын

I would definitely run a air filter. K&N makes some with built in velocity stacks

@devonharvey9086 Жыл бұрын

Greetings from SA What size jets did you use in the carb?

@wtfdorifuto Жыл бұрын

I have everything that you have Plus Met gear Scooterswapshop carb Smooth tires pumped to 32psi I’m 190 and it’ll do 54 on flats

@Travlerr Жыл бұрын

I have 2 rucks. But still would like that part 3 lol

@xplorojoe2396 Жыл бұрын

That community looks super nice! What state are you in man?

@MrContemplation Жыл бұрын

I mean, it is called the ruckus. Now you're raising a ruckus!

@haroldbehar9703 11 ай бұрын

What size jets did you install?

@dvanlinton Жыл бұрын

Get a performance carburetor from rolling wrench it really opens up for gas not like other carburetors I noticed a lot of gain when I installed mines. Watch his video about it on KZfaq you will see how it out performs others.

@brentking5190 Жыл бұрын

Put the dipstick back in and test without the decompression tube. Stock bore may need the compression.

@krusher74 3 ай бұрын

isnt it decompressing the crank case so the crank isnt fighting against oil pressure when it spins?

@QueMeVezWei Жыл бұрын

how tall are you man? Im wondering if its comfy for us +6' people

@blakekeeton4487 Жыл бұрын

as a former ruckus owner, swapping out tires will give you an extra mph or 2.

@TalonSei Жыл бұрын

Might add that to the list soon

@David_loves_foods Жыл бұрын

can you ride in rain with that airbox delete?

@xotzinome Жыл бұрын

What happened with your ruckus? You donw or just doing other things rn?

@Rob.... Жыл бұрын

What app are you using?

@DRONIXAR Жыл бұрын

wow excellent

@EDC_USA Жыл бұрын

I just skimmed the video did you reset your ECU since you removed the throttle/carb? wasnt sure if you needed to since you bypassed it with the ncy cdi? just curious if its needed? thanks all. i am also learning

@krusher74 3 ай бұрын

its a fixed ECU it does not learn and change setting, so wether "reset" or not it does exactly the same thing, The ruckshop have dispelled the "reset" myth.

@gabepires1 3 ай бұрын

What’s the app to keep track of speed on the phone?

@MrMackingit Жыл бұрын

What city is this , that some wide open roads ! 🎉

@ducisquid Жыл бұрын

Can you do the Honda Navi?

@BillySBC Жыл бұрын

I would think your biggest barrier to speed on a 49cc scooter would be drag... I would try putting a little windshield on it and see if that makes a difference, because your upper body is kind of acting like a big sail and slowing you down.

@Prepare2Survive Жыл бұрын

So how much did everything cost from stage 1 and stage 2 mods ?

@congerscott6064 8 ай бұрын

I notice you didn't get a answer on your comment, you can bet he has some money in that bike, I personally can't justify spending that much money on a scooter you have to dump more money into to make it go faster.

@Prepare2Survive 8 ай бұрын

@@congerscott6064 I bought a Honda Ruckus brand new in 2020. I've put over 7000 miles on it so far. It's been 100% reliable. Only thing I did was change the variator weights so the bike has more power going up hills. Total cost for that was around 20 bucks. My top speed on flat roads is 43 mph and that's fast enough for me on the roads around here.

@1987jaac Жыл бұрын

Would you do wheels?

@csachevauxsansabri2612 Жыл бұрын

bigger header for starters. You are giving it more fuel but are not allowing it to escape, in effect sealing it. Need to change the weights to allow it to rev higher ego more power and speed. Chang the cylinder to a 80 or 79 cc and you are flying.

@krusher74 3 ай бұрын

Bigger header is bullshit, the ruckshop have tested that myth, it kills the power.

@scottsog7635 Жыл бұрын

Hey Talon, there’s a channel l follow on KZfaq who done a Rukus Build, find loads of info there on parts etc, channel is called Motonosity, Good Luck🤞🏻

@zwest549 Жыл бұрын

How much to buy this ruckus ??

@R2robot Жыл бұрын

You didn't tuck on the first run, so did you really gain anything? The difference was probably the tuck.

@jakekaim03 Жыл бұрын

You should put an 80cc kit on it

@renehenriquez666 Жыл бұрын

Keep same mpg 🤔

@notpablo8369 Ай бұрын

If you setup your scoot for high elevation, does that mean it goes faster on low elevation areas?

@TalonSei Ай бұрын

Possibly but it would probably run too rich from my elevation to sea level.

@pabrothersoutdoors4299 Жыл бұрын

Check out Mnnthbx, drow sports, both are awesome guys to deal with! Should have got the two brothers exhaust 👌🏼🤙🏻

@justingarnick6021 Жыл бұрын

Anyone else wonder How the F is the mountain bike attached to the wall like that?

@Waajon Жыл бұрын

I thought it was on a ledge 😂

@edmxero2029 Жыл бұрын

It looks like a Fathead sticker

@mattslover2753 Жыл бұрын

Pedal mount

@flyingmonkey327 Жыл бұрын

The name brand is DaHangar bike mounts

@darkfafnir4389 3 ай бұрын

Its got a hanger 😂😂😂

@mishimposble Жыл бұрын

Time to install a GY6

@jayveedavemernado6464 Жыл бұрын

Replace the torque drive and clutch springs to get more top speed

@lostgriz 11 ай бұрын

What kind of gains could be expected?

@sanchjit321 Жыл бұрын

Yo we need stage 3 😭

@HWill-iq9sl Жыл бұрын

Wow, nice great video time to fix someone who ask for help. (T hank you)

@KnGWaLa 10 ай бұрын

I want one

@spiketheadventurefurry8732 Жыл бұрын

Have you looked into the Honda Big Ruckus? It's a 250cc.

@TalonSei Жыл бұрын

They are no longer being made and are very hard to find in good condition on the used market. This regular ruckus fits into my garage line up better than a big ruckus as well.

@spiketheadventurefurry8732 Жыл бұрын

@@TalonSei Well crap.. I just found out about them after watching this video. Ride safe my friend.

@tylerlorence6209 Жыл бұрын

Take the air box off more air more flow baby

@terryholloway9930 Жыл бұрын

Let’s us know enjoyed it

@josephgeorgeejr7039 10 ай бұрын

Should probably wait until after break in period to do performance mods

@nightbloodrayna Жыл бұрын

Where is part 3 ?

@Lilljehook Жыл бұрын

What cc is that?

@TalonSei Жыл бұрын

49cc

@Ethan.s.. Жыл бұрын

Leave your needles alone. 2006 and newer Ruckus’s don’t need the needle modified. Also, if you want to decrease the chance of stripping a screw on your carb use a JIS (Japanese Industrial Standard) screw driver. All of the screws on the Ruckus (& many Japanese vehicles) are JIS screws and not Phillips.

@nordland2235 Жыл бұрын

My ruck is bone stock...and it does 40 mph on a flat road.

@robertrabhudsonhornet5869 4 ай бұрын

What you really need to get is a big bore kit it will make it a 100cc or the 101cc what you have now is a 49cc so that kit will bubble so it will go FAST

@randyboggs18 Жыл бұрын

Where part 3??

@thepab3072 Жыл бұрын

All that noise draws too much attention 😂 Still cool but you need earplugs for sure

@lesheath6216 Жыл бұрын

The heavier your variator weights are the more top end you have, lighter weights give acceleration

@DirtRider22a Жыл бұрын

Seems as tho the fuel pump primed pretty quickly lol

@Wklambert Жыл бұрын

A *what?!* call? (10:14) 🤣🤣

@TalonSei Жыл бұрын

Buck call 🦌 haha

@Wklambert Жыл бұрын

@@TalonSei haha, I thought that was what you said. You're not wrong man. I wonder if something like a bell cover (similar to a harley, for ex) would help. Either way, that thing looks like a lot of fun 😁

@robertcaccavalla6469 Жыл бұрын

So far I spent over 300 bucks in a variator kit, weights , cdi. And essentially there is no difference. The wind has a greater effect on the speed at this point. I have the jet kit and will not install it. Something is limiting the power output of the engine and its in the factory ECU and the attaching systems. Until I find out what it is spending money on these kits is proving to be a Waste of time and money. Yes we all enjoy tinkering with them but results is what counts

@bonavita5683 Жыл бұрын

Yes there seems to be a limiter or restriction on the rpm output.

@zandermcnabb7779 3 ай бұрын

Anyone reading this in the future, Honda puts soft limiters on its ECU and its speed based

@combatunion1884 2 ай бұрын

Any ideas on how to bypass that? @@zandermcnabb7779

@tinybubbles3724 2 ай бұрын

$$ Per hp I really can't think of anything more expensive to upgrade than a ruckus.

@1manshtshowandautobodystuf891 2 ай бұрын

Lol. Cdi eliminates the rev limiter.

@beddamade Жыл бұрын

I would love to build an eletric Rucus!!!! To me that would be sweet as bear meat!!!

@robambrose4199 Жыл бұрын

Honda have now made electric versions of the ruckus, dax, and also super cub. Cheap but really slow though.

@davidlockwood8703 11 ай бұрын

The electric. Scoots. Get more. Speed depends on the wattage. That's the plus. Charge an drain time. Sucks.

@blueelectricfusion Жыл бұрын

yup... as I thought not big gains for $1k to commute on.

@patrickwest4632 11 ай бұрын

in my town the police will ticket a 50cc for going over 35mph everytime

@heinekenisidoro5012 Жыл бұрын

Hi bro can i have one ebike that you dont use it?

@ryangallagher9750 Жыл бұрын

Why would you re-jet your carb before place on your exhaust?. You will just need to re-jet again for your Yoshi exhaust. All your after market mods should be placed on before you re-jet your carb.. You should also be doing spark plug checks to see if your running lean or rich.

@TalonSei Жыл бұрын

It was re-jetted at the same time specific for the exhaust.