This Yamaha Zuma Hauls A$$! | CVT Tuning and Blinker Delete

This Yamaha Zuma Hauls A$$! | CVT Tuning and Blinker Delete | Build 2

Рет қаралды 18,103

Күн бұрын

This Yamaha Zuma Hauls A$$! | CVT Tuning and Blinker Delete | Build 2
Scooter tops out at 55 mph!
As always, I appreciate the watch!
Contact me with any question you may have!
Instagram: Mintworx_Mx
Email: Mintworxtv@gmail.com
Parts List...
Blinkers (4 total): www.amazon.com/dp/B01I1CHCO0?...
Relays (4 total): www.amazon.com/dp/B07DJ6889C?...
Bullet Connectors: www.amazon.com/dp/B08FT2JX32?...
Variator Kit: www.scootertuning.ca/en/varia...
Roller Kit: www.scootertuning.ca/en/varia...
Clutch Spring Kit: www.scootertuning.ca/en/clutc...
Belt: www.scootertuning.ca/en/varia...
Pipe: www.scootertuning.ca/en/exhau...
70cc Big Bore Kit: www.scootertuning.ca/en/produ...
Jet Kit: www.scootertuning.ca/en/carbu...
Shinny Spray:
Tire tubes: www.ebay.com/itm/363772978956...
Temp Gauge: www.amazon.com/dp/B07D9WQXZW?...
Rubber caps to block off oil inlet on carb: www.amazon.com/dp/B094FD5GKM?...
My build page:
mintworxmx.com/pages/build-page
Ways to support my channel:
mintworxmx.com/collections/ap...
Last scoooooooter video:
• Watch This BEFORE You ...
Chapters:
0:00 Intro
1:24 Cleaning
3:17 Front Blinker Delete
6:05 Rear Blinker Delete
10:20 CVT Tuning
21:25 Temps

Пікірлер: 53

@CameronNiemela Жыл бұрын

Lets goooo yess another Zuma vid👌

@ORIGINALCONCEPTGARAGE Жыл бұрын

Nice video brother yeah we've done that before lol melting the cylinder down hard lessons learned

@ayomaggotz Жыл бұрын

Nice breakdown

@MintWorxTv Жыл бұрын

Glad you enjoyed the video!

@sandys9791 Жыл бұрын

Kept the injection on my bike and I havnt had any issues with it, I've put about 2000kms on it and looking thru the exhaust port the piston looks mint. Did you bleed the air out of the oil system? Maybe the way you "chamfered" the ports? I did mine with a small round file.

@Down2Business117 7 ай бұрын

I wired my turn signals directly with the original sockets since i’ve done the same with a Yamaha Razz for the JDM tail light & whenever I brake the turn signals cancel out? Is the turn signal relay/resistor necessary & will it help fix that problem? I have the same Bugeye Zuma as well

@5d_elite_80 15 күн бұрын

What kind of spray was that

@itsroads206 Жыл бұрын

Nice video! Giving me an idea on the blinker delete for my prebug. Where are you in WA? I’m in Marysville.

@MintWorxTv Жыл бұрын

Sounds sick! Love to connect with you on instagram! @mintworx_mx

@SpankMyFace 2 ай бұрын

Time to go LC if you're worried about head-temps, pretty inexpensive since you can just buy Aerox/SR50 LC parts.

@user-eb1ny1xg6p 6 ай бұрын

bro i was 14 when i got a yahama bws and same year put 70cc on and mine didnt blow up and now im 15 doing it again for the 4th time this time with a amazon 70cc but with 21mm carb and 8 inch pipe

@Dawglesslife 6 ай бұрын

What ratio are you mixing now with that 70 Big Bore Kit? And what spark plug do you run now please and thank you. I'm building exactly the same thing right now is why I asked

@thelawntractornut5448 5 ай бұрын

I would assume 40:1

@joeblow8206 Ай бұрын

Put some Michelin boppers on it to add more speed. Chunky tires are so slow

@cliveswabs9365 11 ай бұрын

Do u think i could get the yamaha vity 4t engine in the C3 50cc scoot as its so slow

@dawgboyz24 Жыл бұрын

I grabbed the same zuma off Facebook marketplace. I do my own rebuilds I have a few bikes but this my first 2 stroke scooter ( they’re hard to find) Excited about building it up to its full potential 1. What did you use to restore the fairing shine coat? 2. I seen the speed test video. The TS was 47 mph but I seen in the comments someone was going 60 mph and hit a curve! What was the big change????

@MintWorxTv Жыл бұрын

Good to hear bro! Good luck! Keep me posted with progress! I’d like to see your TS 1. I coated the fairings with maxima SC1. Let it soak into the plastics and it stays on pretty well! 2. I have not done the “full throttle mod” which is cutting that cam on the carb. You should be able to look it up easily on YT. I’ll do that this summer and hopefully see a big change but I’v gained some weight and weigh 240 and don’t wanna over heat the little guy haha. Temps are already pretty high. Im thinking a bigger carb will help out a ton too

@dawgboyz24 Жыл бұрын

Thanks for actually replying 😂. I’ll be sure to document my rebuild. Really wanna start a small engine channel. Just wanna return the help and love I received from YT and the bike community

@jeritwilkening9920 Жыл бұрын

Awesome build man! I do have to ask, what are those scuff marks from? Has it been dumped it over a curb or something? Not insinuating you were the one who did it, but just curious if someone has crashed or dumped it?

@MintWorxTv Жыл бұрын

Yeah dude long story. So I’ll sum it up for you. So one day this knuckle head, took my zuma and tried it impress some girls he saw in a parking lot. He then realized how extremely fast this 70cc BBK actually was. He lost control and flew into a curb doing 60 mph and he is now dead laying in the taco bell parking lot lol. But the scooter made it out just fine besides the couple scratches you see during the video.

@jeritwilkening9920 Жыл бұрын

@@MintWorxTv thanks for the info. Appreciate it. Man must’ve cleared the street between the parking lot and Taco Bell then. I assume it was the parking lot by THE Zips?

@MintWorxTv Жыл бұрын

@@jeritwilkening9920 Yes, yes it was

@cristiangauna7397 Жыл бұрын

Hey will you still show how to do the oil pump delete ?

@ORIGINALCONCEPTGARAGE Жыл бұрын

Hit up scooter swap shop they know how or we can make a video showing how are our Yamaha Zuma as we already did a block off

@nickh7189 3 ай бұрын

is it safe to wash engine like that?

@squishydoggoo3971 Жыл бұрын

hey i cant get to your parts list page.. could you share it with me or something. very interested in some of the parts you used.

@MintWorxTv Жыл бұрын

Sure! What’s your email. The website is down at the moment

@ORIGINALCONCEPTGARAGE Жыл бұрын

Brother give you way better off to Soder Those wire connections to have Better contact as it's not to hard to do with a little bit of Flux to help the soder to stick then tape up

@meme8315 Ай бұрын

Solder

@ORIGINALCONCEPTGARAGE 14 күн бұрын

@@meme8315 damn auto correct gets it wrong lol please be soder I mean solder responsibly my friend! Lol

@r_3_d_m_u_r_d_3_r-_-25 Жыл бұрын

Hi i have a 100cc model and was wondering if you could gove me the part details of your build so i can get my back to 100% performance really enjoyed watching 😊😊😊😊

@MintWorxTv Жыл бұрын

mintworxmx.com/pages/build-page

@MintWorxTv Жыл бұрын

Here is the break down of all my builds

@glenmo1 Жыл бұрын

You could have left the original oil pump and just added some oil to the tank I think like a capful of oil or something like that... Then you would have plenty of oil.

@MintWorxTv Жыл бұрын

Good idea! Already sold the oil pump so ill just be mixing 40:1

@patrickshannon4516 3 ай бұрын

Mine is just like the one in the video and it only has one headlight that comes on and if you hit the switch the other headlight comes on is that the way they are made?

@Nicktheblasian 3 ай бұрын

Yeah, theres a kit online to use both lights

@patrickshannon4516 3 ай бұрын

@@Nicktheblasian but why is it like that it's got two lights in the front and they should both be able to light up when you buy it. If something has two lights then they should both light up.

@Nicktheblasian 3 ай бұрын

@@patrickshannon4516 stock, one is a low beam, one is a highbeam