Tamiya:Mazda MX-5 Part 2 Tamiya Spray can tutorial
Рет қаралды 119,231
Күн бұрынVisit my Webshop for lots of the tools paints and other products used in the video!
✖www.thescalemodelingchannel.com/
Other useful links to products i use are further bellow
✖ Want to support the channel, become a channel member or Patron!:
/ @thescalemodelingchannel
www.patreon.com/thescalemodel...
✖My Amazon shop for US viewers: www.amazon.com/shop/thescalem...
My Workbench:
www.hobbyzone.pl/
My airbrushes and setup:
2 Bar(28PSI) 0.5mm needle
Mr Hobby Ps-290 Airbrush:
amzn.to/3v4Gt56
Grip for PS-290:
amzn.to/3uWiqFH
I use a Eurotech 20A Aircompressor
A Spray booth i recommend:
shorturl.at/gvDV1
amzn.to/2yp5T25
Number 5 Paint:
shorturl.at/ktAT4
Streetblisters Paint:
shorturl.at/hsMVY
General Tools:
shorturl.at/szCQ4
amzn.to/3lAT4ZJ
amzn.to/2xGdDOB
Sanding sticks:
amzn.to/3cVCCPJ
amzn.to/2l1FWOV
Tape:
shorturl.at/bnsJ7
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
amzn.to/3cXgowQ
amzn.to/3c8MmXL
amzn.to/3f4uM8X
amzn.to/3r8sTL3
Tape with plastic sheet: amzn.to/3c8MKWj
Knife:
amzn.to/2xGMvz4
amzn.to/2ypq3sT
amzn.to/2yxGC6J
Tamiya Weathering Set: amzn.to/2Aj0n07
Flush Cut Pliers: amzn.to/2xHd6qQ
Cutting Mat: amzn.to/2znJ0dT
Glue:
shorturl.at/nFOUW
amzn.to/2Pgofx4
amzn.to/2NFHgsD
amzn.to/2zb0jhg
amzn.to/2za8KJX
Respirator: amzn.to/2yn8rfA
Gloves: amzn.to/394jFcv
Tweezer:
shorturl.at/bfyLS
amzn.to/2hIxj9F
Brushes:
shorturl.at/kmyI6
amzn.to/2xG77r3
Decals Solutions:
shorturl.at/quzQ3
amzn.to/2ylIPzQ
amzn.to/2ypuRP7
Panelline scriber:
shorturl.at/xVX19
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Permanent markers:
amzn.to/2zptYoa
amzn.to/2z8WREd
amzn.to/2zFEgjS
Sanding & Polishing supplies:
shorturl.at/dftxN
amzn.to/2xGMKtY
amzn.to/2xPVsq8
Spray stand: amzn.to/2z9Y2D9
Parts holders:
amzn.to/3c6HDpi
amzn.to/3f2GbGD
Panelline accent color:
shorturl.at/fuNS9
amzn.to/2xGB7OA
BMF: amzn.to/2EYoP8k
Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
Hand Drill/Pin vice:
www.thescalemodelingchannel.c...
www.thescalemodelingchannel.c...
amzn.to/2IwW58I
Hole Punch:
amzn.to/2ELyvTk
amzn.to/2IQJMEf
amzn.to/2EOL944
amzn.to/2GYgbwa
In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds, unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at info@thescalemodelingchannel.com
Also don't forget to like us on Facebook & Instagram for project updates and news.
/ thescalemodelingchannel
/ thescalemodelingchannel
Music copyright ® by KZfaq Audio Library
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites
@tomascabral2496 9 жыл бұрын
I like how you kept it very simple! Great vid!
@ThomasMoore.1 9 жыл бұрын
Fantastic videos. Really helpful and enjoyable to watch. I can see this channel going from strength to strength. Thanks
@cellardwellerproductions5125 9 жыл бұрын
Great how-to. Looking forward to more of this build. One of my favorite cars.
@TrueNorthModels 9 жыл бұрын
Great demo on how to spray the rattle can, thanks for sharing. Cheers
@loganmarshall5393 9 жыл бұрын
Thank you for posting this video definitely got some useful info watching it.
@AMERICANLEGENDModelBuilder 9 жыл бұрын
Thanks Tom, Looks like that Tamiya covers great.
@VSMfabio 9 жыл бұрын
merci pour toutes ces très bonnes vidéos que tu partages, ;)
@sirracer2005 7 жыл бұрын
Just a suggestion. If that is the mica blue you can use silver leaf first and then put the mica blue on top. it makes the color a little brighter but shine so much more even without a clear over it. It seems to make all the mica colors just beautiful.
@masonbrossoit4998 2 жыл бұрын
ok so i want to try tamiya paint i never painted im 13 and im thinking metallic blue with metal flake
@tedscott4559 2 жыл бұрын
I know that this is an old video but this helped me greatly. Thank you!
@conradrobinson3315 3 ай бұрын
Excellent no nonsense video.
@thom3124 6 жыл бұрын
I use Future(brand name) floor polish for clear coating. It's a lot cheaper then model paint and you can wash it off if you mess it up if you do it before it completely hardens.
@iangarrett3308 8 жыл бұрын
Thank you for sharing this wonderful video!!! This is exactly how I paint my kits, a Japanese friend of mine taught me the basics on how to use paint from a spray can. Tamiya has the best model hobby paint, both bottle and spray can!! Mr. Hobby comes in second place for me, I use Mr. Hobby paints as well. They are both excellent quality paint products!!
@ayanami808 4 жыл бұрын
I must have watched this 20 times already.
@joelbrower6547 Жыл бұрын
Beautiful color
@aytekinK 9 жыл бұрын
Thanks for this great video.
@Hbz2929 9 жыл бұрын
Great how to i was looking for a tutorial like this on youtube but couldn't find one. But now i have thanks
@esgarsound 9 жыл бұрын
Great tips!!! Thank you
@lol3ndir 9 жыл бұрын
Hello, I am about to do this on a Gundam model. I read some problem regarding Tamiya TS-13 cracking color paints and they say to apply it after wet color or waiting for a month. I watched the video and you just waited 24 hrs prior clear coat. Any guidance from you? Thank you.
@stemoleum 6 жыл бұрын
can you post us a link of the tac paper? and is it possible to use another type to remove dust? would love to buy from your website but shipping to the US takes a long time
@pturley84 9 жыл бұрын
Great tips
@gustavochanchencow9944 7 жыл бұрын
Is it possible to get a decent finish using tamiya spray but no primer ? And for clear spray, i can't find any specific brand in my country, a generic one found in paint stores will do the job ? I already managed to screw my first attempt, so bad that even with sanding and polishing it did not work. Don't want to mess up the second try... Thanks a lot
@Wesley_C 4 жыл бұрын
It helps, thank you.
@pitiriti21 3 жыл бұрын
Cual es la ultima pintura que pusiste ? Para dar brillo?
@Fluterra 7 жыл бұрын
Excellent!
@authority3888 4 жыл бұрын
so uh my tamiya toyota gtone suddenly collapsed while drying and dust got on to it like big time, how do i remove it
@4livecourage 9 жыл бұрын
What if orange peel showed after a few coats of color? Do i need to polish it out before clear coats?
@supmansaccount5360 3 жыл бұрын
Very late reply, but no, you don't have to. You can just add a clear coat and polish it afterwards.
@davidmccann9811 Жыл бұрын
I was wondering if this would be a good colour for my NY Giants replica helmet.
@stevejoelmenalarios5873 4 жыл бұрын
can i use tamiya ts for a surface of a bicycle helmet? Thanks
@Kevin-ps9yf 6 жыл бұрын
During in january winter vacation i assembled plastic model cars twice one is tamiya land cruiser 80 and other is aoshima toyota hilux surf but both i failed the paintings at details. the scalemodeling channel would you teach me how to paint well the tamiya marker? *Comments please*
@blocklandman229 9 жыл бұрын
I heard that tamiya spray paints can't be used on some models. is ths true? I'm building a fujimi civic ek9. will it work with that or will there be problems?
@SpaceGhost999 9 жыл бұрын
Very informative! Subscribing
@toucan6109 3 жыл бұрын
Woag
@andrewm3934 5 жыл бұрын
great thanks
@teamk9_redskull 4 жыл бұрын
Hello what blue have u take ? Tamiya ts53 ?
@mvooo 7 жыл бұрын
Do you see any advantage in sanding between the color and the clearcoat? thank you for the great videos
@TheScalemodelingChannel 7 жыл бұрын
I would not reccomend it. as you are putting scratches in the paint, this will show through the clear.
@shahdaniel9655 8 жыл бұрын
color coat for what?
@JuanVasquez-zq1zn 6 жыл бұрын
I like that holder that you use to hold your model. Did you make that or did you buy it? I would like to get one.
@TheScalemodelingChannel 6 жыл бұрын
Tamiya spray stand
@justhatemeisrael6760 9 жыл бұрын
Hi. Awesome video. I'm having a prob using spraycans over tamiya masking tape. Some of the paint still gets in. Do you have any tips
@TheScalemodelingChannel 9 жыл бұрын
Realy light coats and make sure the tape is properly in place
@ozgundemirr 8 жыл бұрын
Even after 4th coat I find my tamiya ts13 varnish to be quite thin. I remember it was thicker back then I wonder if they had reformualted it to be thinner. Any good alternatives to tamiyas ts-13 for a better glossy thicker finish?
@TheScalemodelingChannel 8 жыл бұрын
+Özgün Demir I have heard good things about the Mr hobby paints
@7privet_ 8 жыл бұрын
is it possible to make opening doors, hood and trunk using some small hinges and plastic sheet to make a trunk?
@TheScalemodelingChannel 8 жыл бұрын
Yes, but it is very very hard to get it to work and look correct and lean
@MarcoPietrobono 8 жыл бұрын
Hi! Great channel!! 1 question, which color are you using? Ps 51? I would like to use a lighter blue, tips? :) Thanks, Marco
@TheScalemodelingChannel 8 жыл бұрын
+Marco Pietrobono TS-51, nope sorry, i don't know the tamiya color range very well.
@Platoon2611 9 жыл бұрын
When is the best time in the paint process to apply the color for the panel lines? At what ratio should I thin my paint for panel lines? How do you remove the excess paint that is on the surface? Thanks in advance.
@TheScalemodelingChannel 9 жыл бұрын
Platoon2611 I do the panel lines when the body is al painted so primerd colored cleared and then dried up for a couple days. Then i do my panel lines, just try some things out with the thining of the paint, no specifics on the ratio. I whipe away the exces paint with a Q-tip
@AppleWorkssymmetricala1 8 жыл бұрын
hello! i'm getting ready to build my first model car. is primer coating and/or clear-coat necessary?
@TheScalemodelingChannel 8 жыл бұрын
Yes.
@napadaanlng69 8 жыл бұрын
can i use that spray primer in hand brushing tamiya acrylic paints? also is it recommendable to spray paint small parts?
@TheScalemodelingChannel 8 жыл бұрын
You can hand brush the paint over the primer. I spray everything i can.
@MrComanche87 9 жыл бұрын
Thanks for sharing this. Do you polish your clear coats?
@TheScalemodelingChannel 9 жыл бұрын
5and 50 Only when it needs polishing
@needtau4138 2 жыл бұрын
For tamiya lacquer sprays fo you need a base paint before using the laquer?
@TheScalemodelingChannel 2 жыл бұрын
Primer, yes
@Chanzilla 4 жыл бұрын
Thanks for making this series! How long should I wait between applying the color coats and putting on decals?
@TheScalemodelingChannel 4 жыл бұрын
Couple days
@yushakmoningka8809 5 жыл бұрын
Hi, I plan to build my first kit using tamiya spray can, and this tutorial video (and also your tamiya nissan silvia video) is really help me a lot. Now I am collecting all the stuffs I need to build my model. Refer to this video, did you use only 1 tamiya spray can (100 mL) TS 51 to paint the kit? Or it need more than 1 tamiya TS 51? Thanks
@TheScalemodelingChannel 5 жыл бұрын
Just 1
@yushakmoningka8809 5 жыл бұрын
@@TheScalemodelingChannel thanks for the reply. More question, how long it needed to peel off the masking tape after painting the door panel? lastly, can I skip the use of meguiars scratch remover and directly use tamiya compound set? thanks
@badm5696 Жыл бұрын
Hi man can you tell me how to do chamber for spraying,I am having difficulties for spraying room and car holder
@TheScalemodelingChannel Жыл бұрын
Links to the spray booth and spray stand are in the video description😉
@gigachad-me9ye 6 ай бұрын
Hello, I was looking all over the instructions and didn't see primer being mentioned anywhere. Does that mean its possible to just put on the TS spraypaint no primer?
@TheScalemodelingChannel 6 ай бұрын
For smaller parts, you can do without. But the bigger parts it is better to use primer, it fills in small scratches and creates a better surface for the paint to adhere to.
@Hbz2929 9 жыл бұрын
When you left it for 24 hours where did you keep it? Was it in the booth and was the fan continuously turned on?
@TheScalemodelingChannel 9 жыл бұрын
I left it in the booth for 2/3 hours with the fan turned on. And then took it in to the modelong room. And placed it in my photo booth to dry off some more
@dariantalo5468 3 жыл бұрын
Hey i have a question.I use tamiya spray for my work a year without mask....So i want to know what gas mask you use?
@TheScalemodelingChannel 3 жыл бұрын
3m professional respirator
@ROYCE415 8 жыл бұрын
Sometimes I get bubbles after spraying 1 coat. Should I shake the can longer? Or spray farther away?
@TheScalemodelingChannel 8 жыл бұрын
+J. ROYCE Shake the can longer, heat it up a bit and do lighter coats from further away.
@OkiDingo 5 жыл бұрын
They are probably not bubbles, they are probably fish-eyes. They are caused by oil. Avoid touch the parts after you wipe them down till after the clear coat drys.
@taxissch.4204 2 жыл бұрын
Good video! Can someone just paint the car with the color coat, skipping all the other steps? Or the color will faint?
@TheScalemodelingChannel 2 жыл бұрын
The clearcoat will give the gloss. And also uv protection for the color
@louiegefamarin23 7 жыл бұрын
what is the best way to strip off the paints. its my first time to paint and i manage to ruined my rocket bunny 86 (thick layers, bubbles, etc.) replies will highly appreciated thanks
@TheScalemodelingChannel 7 жыл бұрын
isopropyl alcohol.
@louiegefamarin23 7 жыл бұрын
thank you very much
@stemoleum 6 жыл бұрын
does thinner chip off the plastic? is isopropyl alcohol safe to remove multiple coats of paint? I ruined a 911 kit and wondering if I can save it or buy a new one.. thanks from boston!
@alonzo23g 9 жыл бұрын
Very helpful, thanks for sharing; excellent work (both crafting and video production)! Did you construct the booth? And is the process any different if using spray enamels?
@TheScalemodelingChannel 9 жыл бұрын
alonzo23g No i bough the booth from zero paints, yes its pretty much the same as enamels, maybe the dry time is a bit longer between coats.
@alonzo23g 9 жыл бұрын
The Scalemodeling Channel thanks again; I assume you also apply decals before your clear coats with the spray cans as well?
@TheScalemodelingChannel 9 жыл бұрын
That is correct
@vicious8251 8 ай бұрын
Do you sand or prep the body in any way before the first primer coat?
@TheScalemodelingChannel 8 ай бұрын
I sand the body with 600 grit
@creepa9 9 жыл бұрын
Do u have to laquer after spraying the color? I thought the colors where direct gloss, and had gloss in them.
@TheScalemodelingChannel 9 жыл бұрын
They are semi gloss
@creepa9 9 жыл бұрын
The Scalemodeling Channel oh ok thanks man. But they do have other cans in this ts range which say semi gloss on them. So what are they going to be like?
@TheScalemodelingChannel 9 жыл бұрын
Pretty much the same
@galfigolf1 Жыл бұрын
Hello bro! I wanna ask u, how many hours after paint with primer can i paint the colour? Btw, your videos is great!
@TheScalemodelingChannel Жыл бұрын
1 or 2
@emmy4691 9 жыл бұрын
I just cant seem to get good results out of Tamiya rattle cans. I prime and gently sand, maintain proper times between coats, shake and roll the ball bearing for 1-2 minutes AND heat the can; I always start away from the piece and trail in and keep the nozzle clean, and I STILL get speckled, bumpy gloss colours. What could I possibly be doing wrong?
@TheScalemodelingChannel 9 жыл бұрын
Zack Vahn From the way you discribe it your not doing anything wrong. Maybe spray a bit closer or further away from the model?
@emmy4691 9 жыл бұрын
Turns out I was being too cheap on the paint and needed to use a LOT more. I've got a glossy surface drying out for five more hours, before I toss some Spaz stix on it.
@PeterPorsche1 8 жыл бұрын
But some ppl say they get cracks when they apply ts-13 after 24h .... what is your take on this ?
@TheScalemodelingChannel 8 жыл бұрын
+Popo popopopo Mine still looks fine
@PeterPorsche1 8 жыл бұрын
+The Scalemodeling Channel Sorry! I was asking for your opinion on this. I did the Primer today by Tamiya and I am amazed by the result. Very nice. Nearly no sanding needed. And really nice drytime. Thank you very much for this video. I was painting some parts i bought at your shop! great service!
@nikosGR78 7 жыл бұрын
Hi my friend,you do very nice job!I'm learning from your videos.But i have a question for you.Please can you give me instructions how to use the masking tape???(i use the TAMIYA masking tapes,the thin white&the yellow).
@TheScalemodelingChannel 7 жыл бұрын
What is there to instruck on masking tape:P just stick it on the places you want to mask.
@nikosGR78 7 жыл бұрын
Maybe i wasnt specific...i asked you because i painted a slot car with tamiya spay.I masked it and painted it at 9.00 in the afternoon and i unmasked it 7.00 the next morning.I thought that it would be dry but..with the unmasking i pealed of the colour!!!!!WHY THAT HAPPENED???Please, i would use some advise here!!!
@TheScalemodelingChannel 7 жыл бұрын
Aah ok, thats a different story indeed. The basic idea behind this is as follows: The bond between the tape and paint is stronger then the bond between the paint and the body. In this case the stronger bonds wins, resulting in the paint peeling off of the body along with the paint. You need to sand the body before you apply primer, i and with 600 grit. After this you can apply paint, or sand the primer with 1000 grit for the paint to stick better. If this is all done correctly the paint should not peel off with the tape.
@nikosGR78 7 жыл бұрын
Thank you so much for you care and advises..you do a hell of a job as long as i'm conserned!!!
@RickChan 8 жыл бұрын
How do you avoid painting too much and what is the recommended distance? I painted my model and the bottom part always appears to be more thick. Also, why would I have bubble in the model when I paint? please help..I pretty much messed up my first model but I still got 5 and I am not gonna mess them up again.THanks
@TheScalemodelingChannel 8 жыл бұрын
+Rick C By keeping the coats light. about 20/30 cm away. Becouse you apply to much paint to fast. Just accept the fact that you'll mess up a couple more. My first one was not something to write home about either.........
@RickChan 8 жыл бұрын
+The Scalemodeling Channel It is true if I say that when the can is running gout I should stop using it because it would start spraying larger painting particle? cuz this is what happens to me. Also, would you recommend to sand some particular area before panting it? I have seen some ppl doing it and what was the purpose of it? Thanks
@TheScalemodelingChannel 8 жыл бұрын
I sand the entire body for adhesion. The primer can grab on to the surface better when its sanded. Maybe shake it more or heat it up in some hot water before spraying.
@flytlies 2 жыл бұрын
Hi I just want to ask did you use the same color coat for the 1st to 3rd coat? or they are different colors?
@TheScalemodelingChannel 2 жыл бұрын
Same color
@flytlies 2 жыл бұрын
@@TheScalemodelingChannel I see thanks!
@JeroenDPK 6 жыл бұрын
geen problemen gehad met de clear op de lak na langere tijd? lees overal dat je de TS13 na 10 min al op de TS kleuren moet doen of pas na een maand namelijk....
@TheScalemodelingChannel 6 жыл бұрын
JeroenDPK totaal niet. Ziet er nog hetzelfde uit als in het filmpje
@andrei3720 7 жыл бұрын
what happens if you dont use a clear coat? Is it really important? or the primier. Can I skip those? Im at my first kit and i dont want to spend alot on it. Please reply😉
@TheScalemodelingChannel 7 жыл бұрын
Andrei F lets start at the beginning. If you don't sand the body the primer won't stick. If you don't use primer the color will show all inperfections and will not stick either. If you dont apply clear the color will become dull and easily damaged
@andrei3720 7 жыл бұрын
The Scalemodeling Channel okay thank you for the answer. I just got the Tamiya R34, you did a build on this. Thats my first kit and I want it to look as good as possible. I want to ask one mire thing. Can I use tempera to paint some parts in the interior or the taillights? Will it still be transparent? Thanks again!
@TheScalemodelingChannel 7 жыл бұрын
Tempera?
@andrei3720 7 жыл бұрын
The Scalemodeling Channel hmm...maybe this word doesnt exist in english. sorry. Its that paint in small tubes that you can pick up from supermarkets
@TheScalemodelingChannel 7 жыл бұрын
I have no idea
@jesusgonzalez419 8 жыл бұрын
Hello, Great Video. I have a problem with tamiya spray can (TS-8), I get orange peel when applying the red Color, I tried to get close to the model, but I get the orange peel. I see orange peel even in the first mist coat, Really light as suggested Could it be because the paint is too old? (maybe 4 year since I bought it?) I heat the can in hot water as suggested , any suggestions? Could it be better if I apply it with airbrush
@TheScalemodelingChannel 8 жыл бұрын
+Jesus Gonzalez That is normal. Maybe you should shake the can a bit longer or heat it up before using it with some hot water.
@jesusgonzalez419 8 жыл бұрын
Hello, thank you for your answer. I decant it and apply it with airbrush, the orange peel was reduce significantly (90%), I will use a 3000 sand to eliminate the rest of the orange peel and then apply the ts-13 clear cote. Regards
@mikeb8644 8 жыл бұрын
Are you using the Tamiya Spary Lacquer ... TS-13?
@mikeb8644 8 жыл бұрын
+Mike B Sorry ... one other question. You seem to use Zero Paints quite a bit. I know nothing about this brand of paint. Is it a lacquer, enamel like Testors or an acrylic like Tamiya? Thanks for any info you can share!
@TheScalemodelingChannel 8 жыл бұрын
+Mike B Fot this build i used TS-13
@TheScalemodelingChannel 8 жыл бұрын
+Mike B It is laquer, Cellulose thinnes based paint for airbrush use only
@molekid999 8 жыл бұрын
Do you have to apply clear coat? Thanks.
@TheScalemodelingChannel 8 жыл бұрын
If you want to make it shine, yes.
@molekid999 8 жыл бұрын
Okay cheers
@TheScalemodelingChannel 8 жыл бұрын
The end result will not be as strong. nor will it look as good. Also the Primer acts like a fine filler for sratched in the body, and helps the color stick to the body a lot better.
@vveskk 9 жыл бұрын
Can you stance it?????
@TheScalemodelingChannel 9 жыл бұрын
It will be lowered an have a little stance
@cameronbittick3498 5 жыл бұрын
Tamiya website says to never use their rattle cans on plastic kits which cuts out most of their products, and yet you seem to have handled it perfectly. Just want to confirm with you that Tamiya rattle can paint and primer are okay to use on a Tamiya 1/24 kit before making any purchases.
@TheScalemodelingChannel 5 жыл бұрын
Cameron Bittick pretty sure they have a plastic line TS and a polycarbonate line PS
@cameronbittick3498 5 жыл бұрын
@@TheScalemodelingChannel I realized that shortly after commenting, lol. I'm going for pearl white on the R32 Nismo Custom kit, would you recommend going with the pearl white paint and a standard clearcoat or standard white paint and pearl clear? I believe the pearl clear instructions said to apply before the paint so I would need regular clearcoat on top regardless, right?
@TheScalemodelingChannel 5 жыл бұрын
Either is fine. Though indeed the pearl clear still needs normal clear on top
@cameronbittick3498 5 жыл бұрын
@@TheScalemodelingChannel Thanks a lot for the advice, very informative channel you've got going.
@doyle201206 6 жыл бұрын
Thanks for the hints as a novice. Can you loose the music as it's hard to hear you with the fan as well.
@shawnzzzzz13 9 жыл бұрын
Using automotive paint will it damage the plastic?
@TheScalemodelingChannel 9 жыл бұрын
Tamiya is not automotive paint. Though automitive paint would not damage the plastic if the correct plastic primer is used.
@shawnzzzzz13 9 жыл бұрын
Thanks for your reply, what plastic primer do you recommend?
@TheScalemodelingChannel 9 жыл бұрын
From the same brand as the rest of the paint you would use for color and clear prefferably
@TheScalemodelingChannel 9 жыл бұрын
From the same brand as you would use for color and clear
@mikebreazeale2563 9 жыл бұрын
I get a fantastic shiny coat out of the Dupont clear coat that I use. Most of the time no polishing is needed. Unless you want too! Very shiny! Anybody wants to know what kind I use send me a message....thanks!
@jordanwong9957 8 жыл бұрын
May i ask if the paint is tacky/sticky?
@TheScalemodelingChannel 8 жыл бұрын
It is not.
@antbonz2892 9 жыл бұрын
how you don't have dust after drying ?
@antbonz2892 9 жыл бұрын
(sorry for my english i'm french lol)
@TheScalemodelingChannel 9 жыл бұрын
Spray booth and tack cloth is all i have to say :P This seems to work for me, Youll always have 1 or 2 but by using a good tack cloth and a good spray booth it gets rid of a lot of dust.
@BrodieD 4 жыл бұрын
Is this even the same scalemodeller. Damn audio has changed massively for the better. Still very helpful vid
@TheScalemodelingChannel 4 жыл бұрын
Pretty sure i’m still the same guy. Yes
@BrodieD 4 жыл бұрын
@@TheScalemodelingChannel I know. It was just a way of saying how much the voice over has changed.
@TheScalemodelingChannel 4 жыл бұрын
@@BrodieD I know, was just kidding :P
@BrodieD 4 жыл бұрын
@@TheScalemodelingChannel damn I'm 6'4 and it still went over my head. Hahahaha
@xdeekay8850 Жыл бұрын
Why tf do you not give out the Tamiya Codes for the primer, colour and clear coat?
@TheScalemodelingChannel Жыл бұрын
Why tf did you skip the part in the video where i do? 0:12
@xdeekay8850 Жыл бұрын
take my angry upvote xD thx
@OkiDingo 5 жыл бұрын
I’m going to have to 100% disagree with you about not being able to get a glossy finish with cans. The reason YOU can’t get a glossy flat finish is your technique. First mistake was your second and third colour coats should wet coats. When you said to quickly mist on the final colour coat I cringed. All you did was add texture, taking away from the flatness. Your clear coating, the first one should be a mist coat and the rest should be slow and wet. Any dry spot will become textured. If the clear coats are sprayed wet the finish should be very glossy. You just might have orange peal from the high pressure of the cans. For cars I actually prefer to use canned clear because of how much sprays out.
@MrMcKane 5 жыл бұрын
Could you make a video showing your technique please?
@did3d523 5 жыл бұрын
ZOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM!!!!!!!!!!!!!!
@larmar Жыл бұрын
Cut the crappy music!!
@TheScalemodelingChannel Жыл бұрын
Sorry for making the choices i did all these years ago with the resources that where available….
@shahdaniel9655 8 жыл бұрын
color coat for what?
@TheScalemodelingChannel 8 жыл бұрын
+shah daniel ?
Model Car Mods
Рет қаралды 55 М.
Barbatos Rex
Рет қаралды 56 М.
SixxuaYT
Рет қаралды 2,4 МЛН