Tamiya

Рет қаралды 10,777

6 ай бұрын

If you liked this model or any of the products featured visit www.sunwardhobbies.ca today!
Music:
'Castles in the Sky' by Scott Buckley - released under CC-BY 4.0. www.scottbuckley.com.au
'Omega' by Scott Buckley - released under CC-BY 4.0. www.scottbuckley.com.au
'Extrapolation' by Scott Buckley - released under CC-BY 4.0. www.scottbuckley.com.au
'Tears In Rain' by Scott Buckley - released under CC-BY 4.0. www.scottbuckley.com.au
'Hymn To The Dawn' by Scott Buckley - released under CC-BY 4.0. www.scottbuckley.com.au
Track: Upbeat Indie Rock [Rock Music] by MokkaMusic / Drive
• (No Copyright Music) Upbeat Indie Roc...
Music provided by "MokkaMusic" channel and inaudio.org

Пікірлер: 56

@dandy193 17 күн бұрын

Just a small tip for you regarding the masking fluid. I'm a Watercolour Artist as well as a modeller, in watercolour before using any masking fluid we gently scrub our brush on a bar of soap before dipping into the fluid, this helps protect the brush bristles making the brush last longer. You may already know this, but I'm sure if not for you it maybe useful for others. Lovely build and props for the work on the tires that must have taken some time

@LemurKrazy 5 ай бұрын

Came back to watch this again now I'm painting one. The blue layering is great.

@maverick3895 6 ай бұрын

Awesome job!

@gillkitten1 6 ай бұрын

I thoroughly enjoyed watching this build. Thank you very much for sharing it with us.

@rebelsatcloudnine 6 ай бұрын

Thank you for watching :)

@dariosmodelbuilds 6 ай бұрын

Awesome build.

@rebelsatcloudnine 6 ай бұрын

Thanks Dario :)

@modelfun 6 ай бұрын

Thanks for sharing this build. Wheels adjustment you did was insane :). Cheers and happy modeling!

@rebelsatcloudnine 6 ай бұрын

Thank you very much :) I tried scribing them out first, but with the curve in the tire shape, I was having a hard time. So I think that adding styrene worked out really well, though it took a long time to complete :)

@stevethefishdotnet 6 ай бұрын

Nice save with that decal. The mottling looks nice.

@rebelsatcloudnine 6 ай бұрын

That was touch and go for a while there, I debated just making it silver chipped paint. But I'm glad I tried, it looks a lot nicer.

@willwoods6466 6 ай бұрын

Corsair always one of my favorite aircraft. That was simply put an amazing build. Fun to watch all the detail you have put into this project. I too am a Sunward Hobby customer, being in the sticks and having free shipping on orders over $70.00 is a no brainer plus the staff are amazing.

@rebelsatcloudnine 6 ай бұрын

Thank you very much Will, I've really had a fun time lately building the Corsair, and I'd like to add a few more into my collection. Especially some of the later versions :)

@LTModels 6 ай бұрын

Great stuff man!! Really enjoyed the extra detail you added.

@rebelsatcloudnine 6 ай бұрын

Thanks Luis, I had a lot of fun adding in those details :)

@messer1096 6 ай бұрын

Well done!

@charlie418791 6 ай бұрын

Awesome model. Nice work. 👍

@rebelsatcloudnine 6 ай бұрын

Thanks Charlie :)

@darrenanderson7969 6 ай бұрын

amazing job and your extreme commitment to detailing is inspiring... alas, I'm too lazy and always opt out for the easy way... (back to the internet to buy over-priced aftermarket parts) instead of just taking those chances. Well done! 🎉

@rebelsatcloudnine 6 ай бұрын

My last project involved a whole ton of after market parts, so I think I was more in the mood with this project to scratch build. It was pretty fun, and I'd like to try more of that in the future :)

@paulwarren1173 6 ай бұрын

Nice job. I love how you handled the tread on the wheels. Some of the chips look a little odd but overall a terrific job.

@jamesmcansh6393 6 ай бұрын

Great build very creative ! I use Sunward Hobbies ever since my return to modeling awesome place ✌Canada🤞

@rebelsatcloudnine 6 ай бұрын

They are a really excellent hobby store, I'm excited to see them continue to expand :)

@TheWaggishAmerican 5 ай бұрын

Aghh I didnt get the notification for this vid! Nice work.

@BasicModelling 6 ай бұрын

There's detailing... then there's superdetailing.. then we have superextraordinary detailed detailing... .. and then we have THIS!!!!! What can I say.... That is one 'eck of a good looking model!! :) I'm yet to build a Corsair in 1/48, but it looks like Tamiya is the one to go for.. unless Airfix makes one in the near future! ;) Thoroughly enjoyed this.. :) :)

@rebelsatcloudnine 6 ай бұрын

Thank you so much Rob, I think that you will really be impressed with this kit when you get one. It would be nice to see a new one as well, apparently Airfix was going to make one in 1:24th scale, but when Tamiya came out with their kit, they decided to go with the Hellcat. Now I'm kind of wishing I had that one to detail up haha.

@chriswilson9720 Ай бұрын

Brilliant

@freemanreed5228 3 ай бұрын

Amazing build!!!! It was a joy to watch your video. I was thinking, most of the pictures I have seen of Corsairs parked have their flaps up, not down. I have seen a video of Pappy Boyington climbing up onto his plane, with the flaps up! Actually, with the flaps up, it is easier to climb abord than with the flaps down. With the pilot installed, I can see where he might have lowered the flaps for take off. Most of the earlier Corsairs up to the D model, didn't have the cut out in the flaps, for the pilot to step onto . With the flaps up, it makes the trailing edge closer to the ground, about knee high, than with the flaps lowered, about waist high. And much more difficult to board the plane, especially with a parachute. Again, great build. I look forward to the next one!!!

@rebelsatcloudnine 3 ай бұрын

Thank you very much, as for the flaps, with the last Corsiar that I built I built it with the flaps up and the wings down. So with this build I was curious to see what it would be like to build it with the wings up and the flaps down :)

@edutaimentcartoys 6 ай бұрын

awesome

@kiwiruna9077 6 ай бұрын

A really nice build, even if it's not in RNZAF colours (guess where I'm from?🤔). The unmasking of your decal save was pretty nail biting, and an enjoyable watch, there's a few things I'll have to try when my F-4U1D hits the build stand.

@rebelsatcloudnine 6 ай бұрын

I'd like to build one in a RNZAF some day, maybe a good excuse to get the 1:32nd scale kit :)

@Cyberpharao 6 ай бұрын

Amazing work! Adding even more realism to an already excellent kit is both fun and in your case made it even better. BTW, what is that light blue tape you're using?, seems to have just the right amount of tackiness

@rebelsatcloudnine 6 ай бұрын

Thank you very much. It's called Nichiban, it's a kabuki tape very similar to Tamiya, but it's thinner, and slightly less tack, but it only comes in 2 sizes.

@mrcschubbyboymodels2503 6 ай бұрын

Sweeeet build

@marksixofone4104 6 ай бұрын

WOW!!!!

@Conn30Mtenor 3 ай бұрын

I'm planning a F4U-iD build for Robert Hampton Grey VC, FAA.

@scottsheward4740 6 ай бұрын

Nice touch with the cowl flap mechanism! Really nice paint work, too, I like how subtle it came out. This was a really well done build and the extra detailing looks to have been worth the effort. I do have one question: why you pronounce it as “Corzair”? Is this a regional thing?

@rebelsatcloudnine 6 ай бұрын

I didn't realize I was doing that, so likely just a me thing.

@_-Renaud-_ 6 ай бұрын

Hey bro i am also working on a Corsair from hobby-boss Cheers from Switzerland 🍻

@danwilliams1686 6 ай бұрын

Impressive build! I think i would go with true details wheels though lol. That looks like too much work on the treads.

@rebelsatcloudnine 6 ай бұрын

I think so too, I might do it again, but only if I can't find replacements. But it was really fun to try, I've had the idea to do this for a few years now, and I think the effect works.

@luciussander8217 Ай бұрын

Nice build, but for me you've overdone the chipping and weathering. Just saying...

@paulwoods4349 14 күн бұрын

Definition of insanity? Putting your own tire threads

@christopherblack3102 Ай бұрын

I’ve never heard decals pronounced as “ deckles “. It’s pronounced “ DEE-Cowls “.

@rebelsatcloudnine Ай бұрын

Actually both are correct and it depends on where the word is being used linguistically. I am from Canada ergo I decal.

@igis12 6 ай бұрын

you are a masochist

@rebelsatcloudnine 6 ай бұрын

Only when it comes to modeling.

@paulshrimplin4032 6 ай бұрын

Needs more work on the weathering to fade down the blue with oil paints , dose not look natural you plane .looks like it was made a beginner

@Beniah107 6 ай бұрын

Are you commenting on the right video?

@darrenanderson7969 6 ай бұрын

upload some work/videos/pictures of your recent builds and lets have a look at your astounding and professional looking "realistic" models

@stevethefishdotnet 6 ай бұрын

A _beginner?_ I know a young man on here who just slathers paint on his models to the point that his panel lines disappear. Then he applies expensive aftermarket decals over the sloppy paintwork with horrendous brush strokes. _That_ is a beginner. I try to encourage him to use paint thinner to become a better modeler, but as bad as his work is, I am not a condescending cretin like yourself.

@rebelsatcloudnine 6 ай бұрын

That might be so Paul, but at least I know which direction the exhaust stains go on a Corsair.

@LemurKrazy 5 ай бұрын

Wow - your comment needs more fading. Such a beginner comment.

@maverick3895 6 ай бұрын

Awesome job!