DIY Leather Rose

Рет қаралды 81,159

6 жыл бұрын

DIY Leather Rose: bit.ly/3B8g0Y2
Here's what you'll need:
Rotary Punch: bit.ly/34sfwQx
Craftool® Razor Scissors: bit.ly/3BegDPU
Tooling Craft cut: bit.ly/3Gye5go
Spray Bottle: bit.ly/3gAQ0uN
Modeling Tool Point & Stylus: bit.ly/3stYtpb

Пікірлер: 46

@jmm3983 6 жыл бұрын

I made one...it came out beautifully....Thank you!

@raptordeath 2 жыл бұрын

Making one similar today for my Ma. Thank you kindly, very easy to follow. All the best to you.

@ellikramer4012 3 жыл бұрын

Love it thanks! Can’t wait to try this eek

@flatdog- 3 жыл бұрын

Would love a copy of the pattern too if it’s available please?

@BrosephRussell 2 жыл бұрын

That is so awesome

@marleidelima2066 10 ай бұрын

Amei a tradução, a aula ficou top

@randibgood 3 жыл бұрын

You need to make sure to offset your petals. Basically, you should put the 2nd petal layer so that the center of those are at the point where the smallest petals meet each other. Then the largest petals centered where the 2nd layer's petals meet. This might be important for someone who has never made a rose from any medium, not just leather. This is how they are made from icing roses on cakes to roses made from paper and craft foam roses, etc.

@teepeepardievents2877 2 жыл бұрын

What type of leather did you use?

@randibgood 2 жыл бұрын

@@teepeepardievents2877 I'm not sure. I had bought a scrap bag from Hobby Lobby. It wasn't "raw", but it still had some stiffness. Hope this helps!

@user-kv5vc8fq2h 5 ай бұрын

What gauge of wire for stem?

@stevenmiller1059 3 жыл бұрын

I've made about 25 of these so far . They are just plain fun for kids and you...

@caitlinannegrey 5 ай бұрын

About how long does it take to make one rose?

@ericsdouzart369 3 жыл бұрын

Is there a pattern download? I can draw it but if there's a download I'd rather that. Gorgeous rose by the way. The best I've seen yet. Thank you.

@TandyLeatherCo 2 жыл бұрын

bit.ly/3B8g0Y2

@user-jn3en9pq2j 8 ай бұрын

私ときはろうそくで炙ってやってました。あぶってるやつもみてみたいですね。あと、リクエストなんですが、革はどうしても男性向けな気がするので、このバラ見たく女の子向けのものもつくってほしい！革はピンクやミントとかの可愛い色もあるのに…

@TheMaritimeHorror Жыл бұрын

I’m guessing you dye the leather afterward? Do the petals retain their shape when you go to dye them?

@richardcoverdale1562 4 ай бұрын

You can dye before or after. In my experience dye looks better than paint. I airbrushed mine with Angelus Leather Dye (I used eco flo on the leaves because I didnt have the angelus green). I dyed before, then wet and shaped them. But if you dye without an airbrush the moisture from the dye can also be enough "wet" to shape them.

@fuzzysniper 3 ай бұрын

You can use paints on leather also. It holds up really well.

@wesdresen9994 5 жыл бұрын

that's a nice simple project. I made one before I noticed it was a tandy project. Thanks for the vid.

@njofei 6 жыл бұрын

Thanks Randal...

@WastedTalent- 6 жыл бұрын

Ha! I made a request to Tandy for this a couple of years ago. I guess you guys finally got around to making it.

@njofei 6 жыл бұрын

Beautiful, what size punch do you use?

@randalstone 6 жыл бұрын

I don't think that's super critical here. Big enough to pass the wire through, but not big enough for the bead to pull through.

@502deth 4 жыл бұрын

flesh side? grain side? teh one being made clearly shows the grain side toward the center of the rose, while the finished one shown at the beginning and end appears to have the flesh side turned out on the petals, meaning the flesh side went towards the center of the rose?

@karlakirkpatrick8927 6 жыл бұрын

wow

@jmm3983 6 жыл бұрын

Where can I get the pattern template for the leather rose?

@stevenmiller1059 3 жыл бұрын

No initial pattern... Just use sockets from a tool box and a water glass for the big circles

@josephjoe9088 6 жыл бұрын

Nice video love it. What is the thickness of the leather? The oz I mean

@TandyLeatherCo 6 жыл бұрын

www.tandyleather.com/en/product/tooling-leather-piece

@TandyLeatherCo 6 жыл бұрын

Thank you! The leather used is our pre-cut tooling leather that is 8-1/2" x 11" :-)

@josephjoe9088 6 жыл бұрын

I know this I wanted the thickness. Is it 2oz or 3oz?

@TandyLeatherCo 6 жыл бұрын

Joseph Joe 4/5oz

@josephjoe9088 6 жыл бұрын

Thanks

@krishnendhuchakra6358 6 жыл бұрын

How much is the cost?

@stevenmiller1059 3 жыл бұрын

Cost is about $12 each... But very fun .

@rayshotwell7316 5 жыл бұрын

....is there a pattern for the pieces.

@stevenmiller1059 3 жыл бұрын

It's just circles brother... A socket set and a jar lid

@dadedubbledee 6 жыл бұрын

Is there a pattern to download please?

@TandyLeatherCo 6 жыл бұрын

dadedubbledee The pattern is not available for download. The pattern is uploaded under the comments on our Facebook, under the same video.

@dadedubbledee 6 жыл бұрын

thank you

@stevenmiller1059 3 жыл бұрын

I made templates with a socket set and a jar lid for the large circles

@michelleglover9543 6 жыл бұрын

Is there a pattern available to download?

@TandyLeatherCo 6 жыл бұрын

The pattern can be found on our Facebook page under this video 😄

@michelleglover9543 6 жыл бұрын

Tandy Leather thank you so much!

@josephchester712 6 жыл бұрын

Michelle Glove j

@rolandfitzgerald1475 6 жыл бұрын

Michelle Glover I