How to paint a Motorbike using spraycans. For a more detailed process see blog link carpaint.com.au/motorbike-re-... This video is to be used as a guide as procedures/process can change (depends on products used)
Пікірлер: 122
@mightyh90323 жыл бұрын
Looks nice, but when using 2k clear coat USE the right PROTECTION! This is not your regular paint and will do some serious damage your health. Read about isocyanates. Even your standard respirator may not be enough. Be safe guys!
@danielkerr4100Ай бұрын
Honestly I've done many clear coats over the years and while outside a simple mask is fine, people just over exaggerate and think you need a hazmat lol, you don't
@troylawson85563 жыл бұрын
Fantastic video. Haven't had the need to paint a tank yet but this gave me the idea that if I do, I can do the job right.
@dwninetynine2 жыл бұрын
Hi mate, thanks for posting this vid.. I watched a lot but kept coming back to yours and last weekend bit the bullet and painted my Triumph tank.. It came out far far better then I could have imagined and I think the key was your point about the prep being the biggest part. I spent hours, priming, flattering back with a guide coat and then finally colour and clear.. I even added the centre strip following your method too, Result is amazing. Thank you. If you want to see it I’m happy to share…. Thanks again..
@brianlundlarsen37253 жыл бұрын
I used this to paint my fuel tank and it worked out great. Thanks!
@steventomlin3 жыл бұрын
Great video...debating doing this on an older bike. Great tips, thanks!
@Mr_Ashley4 жыл бұрын
Thank you so much for this video! The most informative of each and every step with some great tips added in there too. Glad I found this before starting to paint my tank 👍👍
@thatcarpaintshop5 ай бұрын
Happy to help,
@TheGreatestBeyonder9 ай бұрын
Looks amazing! I’m pretty good on the tools but have never sprayed a tank before! It’s given me the confidence to have a stab at it! Thanks 👍🏻
@knoxrider23523 жыл бұрын
Great Job! I learned a lot. Time to tackle my tank!
@deganni26889 ай бұрын
thank you for sharing the step by step. that came out very good. the stripe adds a bit of character to the total design. well done
@danielkilbourn49612 жыл бұрын
Sweet vid. Thanks! I've built 5 frame up bikes and 2 cars but never painted before. I have 2 fenders to do on my current project and I'm gonna try this. Again, thanks!
@CharlesNolanArt Жыл бұрын
That is excellent! Better than I would expect!
@samcerone72133 жыл бұрын
Awesome informative video, thanks very much!
@brodygriffin38583 жыл бұрын
The pictures of the bike look like it’s in Baltimore, MD. Federal Hill. Love the work nice job
@potatowater2 жыл бұрын
Thanks man very helpful video and a awesome paint job from a can
@samriver773 Жыл бұрын
DUDE you have some massive painting talent Bruv!!!
@ronaldwhite58873 жыл бұрын
Very nice, especially for working outdoors. Great “diy” for someone willing to attempt this that has a older motorcycle that may not be worth having a professional paint job expense. Thank you.
@dan17692 жыл бұрын
Thanks great job.. I be using this as a guide for my Harley Sportster.
@MotoOnMyMind8 ай бұрын
Beautiful job! This video is super helpful. Thanks!
@richardmcatee5902 Жыл бұрын
Just wanted to say thanks. So many helpful tips in there. And now I know that I have been doing everything wrong up to this point. :)
@kenbritzman81363 жыл бұрын
Nice one, so informative, I ready to have a go myself , wish me luck
@AB-speaks3 жыл бұрын
Thanks for this tutorial video... From India 💕
@jonathanredman8497 Жыл бұрын
Really useful video. Thanks for posting.
@martinandrews68753 жыл бұрын
Nice one helped a lot thanks.
@CHIBA280CRV3 жыл бұрын
Fantastic job sir thank you 👍
@elcapitanortz Жыл бұрын
Great video made me realise im more than happy with the colour of my tank and definalty wont bother with all this malarky.
@TheCraigant Жыл бұрын
thanks for the video mate i found it supper informative
@iamdjtsunami Жыл бұрын
such a great video. Thanks for sharing
@JackMens-yb4bp6 ай бұрын
Very nice, thank you for sharing!
@juanmaza857525 күн бұрын
nice color combo!
@owensmith12583 жыл бұрын
Cool video, thanks a lot👏🏽
@MurrayRichardson-pp3qr3 ай бұрын
Great job and great video. I'm a mechanic, not a painter so I've dabbled a bit and painted a couple of tanks but this will elevate my next job right up there. Thanks again Muzz
@kepaloha2 жыл бұрын
"Tanks" for the information!!!!!!!
@samuelcf972 жыл бұрын
Result looked great
@HoonTV8 ай бұрын
Great job
@Iswhatitisssss3 жыл бұрын
Nice is see your in Perth . I’m about to paint my vrod tins , I’ll come out and buy some candy during the week . Wicked
@thomasstansberry23112 жыл бұрын
Nice job
@budz.e47302 ай бұрын
Perth Western Australia , I know the paint shop I buy paint cans from these guys they make good quality paint with good full paint cans , full spray paint supply’s
@toenyo2 жыл бұрын
Nice job - I’m always hit and miss with orange peel and have to wet and dry…. One day I’ll hopefully get it.. thanks
@TennRides Жыл бұрын
Looks very nice. I wish you would have showed us how you removed the insect for the clear coat, or from paint on the tank.
@adrianhearn34132 жыл бұрын
Amazing 👌👍
@daveco12702 жыл бұрын
I see some people take the tank down to bare metal with paint remover before painting, others will sand it down, leaving a lot of the old paint in place, like you did in this video. The paint on my tank isn't horrible, but it's got a couple scratches and chips...which is why I'd like to repaint it. I haven't done any painting so I'm not sure if I should take it down to bare metal or just sand it down enough for the primer to take hold.
@richardbartlett4075 Жыл бұрын
Great video! You spray with such ease, confidence and smooth. That is a learned and experienced talent! So you do not sand after each final spray? I guess you don't have to as long as you are under the 1 hour time. Very well done. Do you buff it out after all has cured? Sorry for so many questions, I don't want to screw up my 1976 RD400. I can build high performance engines (shop), but I can screw up painting every time. At 68 years old you would think I should have mastered painting - not even close. Thanks
@grahamearl45022 жыл бұрын
great video, I have stick on decals (chrome flashes) that I need to apply to my tank, a 1982 650 Nighthawk, I presume that there are no issues with putting clear coat over these, there are no instructions with the decals as to this process.
@northernspur62823 жыл бұрын
Excellent video mate , thanks for filming the process and educating us as to how to properly paint a petrol tank using spray cans , great end product. I did notice that you seemed to only spray the top and sides ?
@thatcarpaintshop2 жыл бұрын
Well there wasn't any place to hang the tank, otherwise its possible to paint the underside later on (or first) and mask it all off (correctly).
@AyPapi693 жыл бұрын
You made this look easy. I'm doing a large '96 CBR900RR tank right now. The first priming turned out bad. I held the can too far away so it turned out all grainy. I waited for it to dry, then sanded the tank and reapplied primer. This time it came out a lot better and smoother. Next step will be sanding it with 600 grit & a guide coat.
@xavier4152 жыл бұрын
I prometes a helmet and key is really having a clean tank before primer.
@davidsantiago33603 жыл бұрын
I did my street glide. Took me a month but it cam out beautifull
@momanix46167 ай бұрын
Is there a color code for the chosen colors? Really enjoy the combination!
@wayneconn10792 жыл бұрын
Will the vinyls distort ? Some ive used do this thats what i worry about
@peterwilliams26013 жыл бұрын
What is the blue stripe material you used there bro?
@TheSoftSins3 ай бұрын
2 things: 1: you have any orange peel before the clear went on, if not any tips on avoiding it? 2: how long did you wait between the base coat and the stripes?
@dannyhatfield72592 жыл бұрын
Did you buff the clear coat?
@etanneriii4 жыл бұрын
wow.
@reecegilbert16663 жыл бұрын
Can you use this method over any type of paint? e.g. acrylic, or enamel
@llewvirtue8613 жыл бұрын
Are you kidding good job mate
@pds49273 жыл бұрын
what spray paint brand do you recommend?
@MrPaulo14003 жыл бұрын
very informative. Did you use as well the clear coat for the tank on the fender as well? I was told that is useless if you don't use it for the tank gas. But I found that it gives a nice finish on plastic parts as well
@thatcarpaintshop3 жыл бұрын
I used the same 2k clear on the tank and the fenders. Its best to use a 2K clear on the Fuel tank as its more resilient to Fuel (compared with say, Acrylic Lacquer).
@888jackflash Жыл бұрын
Question: What's the best way to avoid drips? And related,... how thick should each coat be? Txs
@c21delta943 жыл бұрын
What bike did that tank come from?
@tonyrigg91823 жыл бұрын
what do tou use to make the paint petrol proof ?
@ThomasJojo2 жыл бұрын
Outdoor ?
@xavier4152 жыл бұрын
Thanks for the walkthrough. After you spray the paint you don’t wet sand it at all? Do you wet sand if you get orange peel? Thanks.
@ekimandersom44782 жыл бұрын
No
@Martinbjorhusdal3 жыл бұрын
Can you use a «wet and dry» sandpaper without water, As you would with a «normal» sandpaper, Just with a higher grit? Example: instead of using a 400 normal dry sandpaper, can you use a 800 wet and dry paper without water?
@p.s89503 жыл бұрын
Has anybody ever used this stuff I have, called Liquid Sandpaper ? I've used it on wood projects but wonder how well it would work on a tank like this.
@jimbo80093 жыл бұрын
Great video, one question .that looks like a 4 gallon tank how many cans am I going to need?
@thatcarpaintshop3 жыл бұрын
I used 1 spraycan of Cromax(Dupont) Centari 600 for painting the bike.
@israelnowgo3 жыл бұрын
peace from israel thank you for this video
@paulharvey41592 жыл бұрын
I'm curious to know how you stop under bleed when one piece of tape crosses another to form a crisp edge..I use 3m tape and still get under bleed..Nice work!
@thatcarpaintshop2 жыл бұрын
as long as you are using the fineline tape and not masking tape there shouldn't be bleed is you keep the colour applicatrion light per coat (dont flood the paint on) and press down the cross over hard.
@c21delta943 жыл бұрын
What/Where is that tank from? Norton? Ducati? Do you know if it 's greater than 4 US Gallons? Does anyone know where i can get a tank like this to fit a Harley Davidson Softtail?
@stephanegroulx77863 жыл бұрын
Great video. What is the approx. distance you hold the can to the tank?
@jmagda41 Жыл бұрын
It looks like 2-3 inches. I don't know how he didn't have any "runs" (I think he calls them "tram lines"). Spray cans always say 8-10 inches, but then my spray jobs come out like crap compared to his.
@eleg000003 жыл бұрын
merv ya legend
@SuperOMARKO Жыл бұрын
Oh to have an outdoor paint shop😂
@julianspringer18356 ай бұрын
How does the engine run with the overspray in the tank? Better to mask off the tank neck
@thatcarpaintshop5 ай бұрын
Na all good in this case and in the context of what was done. If using a 2k primer I would have been more careful but hey its a you tube video. Tank was flushed after anyway.
@williampalacio836929 күн бұрын
Step 5. What kind of flat black is used? After I used flat black and tried to sand, it built up in clumps on the tank and sand paper.
@thatcarpaintshop27 күн бұрын
Acrylic Lacquer Flat or Matt Black (not Enamel). Leave it to dry (normally a few minutes) before sanding otherwise it will clog. If you apply too the coat too heavy, this can cause clogging as well. Failing that, you can get powder guide coat in a spray-can.
@shrimptunes34633 жыл бұрын
And please remember, people, to wear the recommended safety gear, including respirator, gloves and full coverage clothing! The warning labels are there for a reason. This stuff can fuck you up!
@peterfettig86663 жыл бұрын
Hey, I have a stupid question. I want to paint my tank a matte/satin color. When I put the clear coat on will that just turn the satin finish into a glossy finish, or will it look like satin paint with a clear coat? Not sure if that makes any sense.
@allenmagill25683 жыл бұрын
It depends you can get matte clear and satin and gloss, if that's what you want to achieve go for the satin clear
@peterfettig86663 жыл бұрын
@Do One Ok. Thanks a ton. Sounds like it takes quite a bit of finesse. I'm going to wait to see how I like the matte/satin look before I decide what kind of clear coat I'll do.
@bluedevilrider94733 жыл бұрын
Nice vid. I have a question: after how many hours i can put the clear coat after putting down the colour?
@bluedevilrider94733 жыл бұрын
@Do One thank you a lot for the response 🙏
@ekimandersom44782 жыл бұрын
30 minutes
@heraldicadesign83743 жыл бұрын
how I prevent gasoline from dissolving my paint job???? will acrylic enamel be enough to protect it????
@thatcarpaintshop3 жыл бұрын
Acrylic Enamel may not be enough, you really need 2 pack paint.
Painted a 1958 Harley myself once . Did not turn out well .
@BillHerring-nh5th4 ай бұрын
How long before can hardens up after activating?
@thatcarpaintshop4 ай бұрын
It’s always best to use the can then and there. However as air is not getting into the can and If the can is kept cool, I have known people that have used it the next day with no problem( just check first to see that it’s ok… will start to splatter)But we always suggest to people to use the can right away.
@SDsailor7 Жыл бұрын
No wet sanding of the clear coat??
@thatcarpaintshop Жыл бұрын
Not in this case (I felt it didn't need to be done)
@Epiphalactic2 жыл бұрын
Instead of a "value coat" when going black, couldn't I just add an extra black coat?
@Roman-bg8zb8 ай бұрын
No buffing?
@thatcarpaintshop5 ай бұрын
Happily enough, no we didn't need to do any buffing.
@Mazafaka77 Жыл бұрын
Лак из балончика-идиотский выбор. Такой лак облезет очень быстро
@dbk814 жыл бұрын
How was the orange peel?
@zoomjoo4 жыл бұрын
looks nonexistent
@thatcarpaintshop3 жыл бұрын
near on none
@Ladosligese3 жыл бұрын
all that wax and grease remover .. you could just have used dishsoap and a wsashdown after that with clean water .. just saying ofc and when praying .. keep a 20 cms distance to the tank :-s or u risk getting runs
@thatcarpaintshop3 жыл бұрын
I generally don't pray when I am spraying.. just saying. As far as the wax and grease remover goes, I first tried the dish-soap but unfortunately whatever contaminant was on there wasn't budging ( hense the amount of wax and grease remover being used)
@lumazzoni3 жыл бұрын
Should close the gas filler 🙈💩
@thatcarpaintshop3 жыл бұрын
The type of gas filler cap used didn't require this step.
@ronniejohnson3172 жыл бұрын
Where are the bugs? I would have a million land on it.
@Akhil.Chahar3 жыл бұрын
The freaking tank lid is open dude wth
@thatcarpaintshop3 жыл бұрын
Actually, the tank did have a plug in it but because of the shape/type of the filler cap, I had to mask it this way
@douglasalexander43483 жыл бұрын
ISOCYANATES in 2 pk. Please read up on it, very hazardous to your lungs. It really needs a high level of protection, and you didn’t even have a dust mask on....
@steveburton28066 ай бұрын
You are far too close with the spray can
@thatcarpaintshop5 ай бұрын
I know its a little hard to tell in the video but we are using left-handed spray cans, which as you should know, are a little different to use.
@qivarebil21493 жыл бұрын
Big dent on the left side. Awful result.
@thatcarpaintshop3 жыл бұрын
I don't know what video you were watching as there was no dent other than the curvature of the tank.
@nickwilliams10654 жыл бұрын
Paper suit to cut down dust, while spraying outside!!!! Mmmmm, interesting concept but tragic fail.
@thatcarpaintshop3 жыл бұрын
The dust suit wasn't there to cut down dust (after all we were painting outside). In Western Australia we have Work Safe Codes of Practice, in this code of practice it stipulates that if you are painting "Two Part" paints (the clear), overalls, gloves and mask must be worn... I was merely complying with these safe practices.
@mattbfab3 жыл бұрын
@@thatcarpaintshop not once did you wear a mask ?
@thatcarpaintshop3 жыл бұрын
@@mattbfab Actually I did, except when talking I removed the mask so that it didn't get in the way.. the video was edited down but in the extended versions you see I was wearing a mask but no one wants to watch a 45 minute video. I wore gloves, I wore a dust suit for protection, not wearing a mask when spraying would then just be silly.