Epic Barn Find Turd - Is It Worth Polishing??

Рет қаралды 209,424

2 жыл бұрын

In "Mr. Camerman Unveiled", Mr. Cameraman brings in an old barn find and wants Taryl to get it running if possible. Is this turd worth polishing?? Or should it be flushed? Taryl also takes it upon himself to finally unveil what Mr. Cameraman REALLY looks like. Get the scoop here. And as always... There's Your Dinner!!
Subscribe Today! (Click the 'Subscribe' button on this channel!)
Be sure to 'Like' Taryl & Co. on Facebook for all the current up-to-date events:
/ tarylfixesall
Be sure to follow along on all the new projects on Instagram!
@tarylfixesall / tarylfixesall
Pick up YOUR Taryl Apparel Here! (Shipping Worldwide)
www.TARYLFIXESALL.com
Get Your Parts From www.ProPartsDirect.net and Tell 'em "Taryl Sent Me!"
Grass Rats Garage Theme Music Available!!
Available on iTunes and other online vendors or pick up a physical copy on CD or Cassette Tape from the Taryl Online Store:
tarylfixesall.bigcartel.com/p...
#tarylfixesall #grassratsgarage #barnfind #willitrun #toro #pushmower #vintage #antique #old #antiquetechnology #vintagetechnology #oldtechnology #hv350 #valcocincinnati #lawnmower #grasscutter #1970s #mower #diy #howto #repair #fix #smallenginerepair #funnyhowtovideos

Пікірлер: 563

@charger19691 2 жыл бұрын

By the way, Taryl could have edited out the part when the mower didn’t re-start after the repairs he made, but he didn’t. Just shows he’s an honest man with good character. 👍

@lawnmowerdude 2 жыл бұрын

Well that’s just the reality. Showing that keeps people from getting discouraged if they run into problems.

@jeffclark2725 2 жыл бұрын

@@lawnmowerdude will admit that vertical pull starter is still a good one,I figured for sitting for so long it would have gotten a wd 40 bath and new rope, it would have broken on me after a few pulls

@dirtyaznstyle4156 2 жыл бұрын

Well either it fires and you get to see it, or it don’t… You can kinda assume if the vid ends and there isn’t a show of success that it didn’t end the way it was planned. I’d be suspicious if they said it all worked but never showed it running or not

@LongWalkerActual 2 жыл бұрын

Quite the contrast when compared to those who cook on here or television, & NEVER make anything that tastes bad...

@joehatch1602 Жыл бұрын

But are those his real teeth?

@rashton5730 2 жыл бұрын

Back in the mid 70's when I was a kid, I was given a old 60's Montgomery Ward push mower by this little old lady down the street. It was a Powr Kraft 3 HP, painted gold with a wind up starter, I was fascinated with the wind up starter. With the help of my father, we flushed the tank and cleaned the carbanator, there was no KZfaq back then, so we used a puller to pop the flywheel off :D cleaned and set the points. Hot spark and compresieown...... a little dinosaur juice, wound her up and she popped right off! My father adjusted the carbanator and she ran like a champ :) I mowed many lawns with Goldie, the wind up starter fascinated people, "How do you start this thing?" Oh. you just wind her up, set the choke.... and twist this handle :D

@jeffclark2725 2 жыл бұрын

Dad had one of those,,he would just crank on it till it started, some times half an hour and it would finally catch,and run, points always worked

@haneyoakie14 2 жыл бұрын

I have that same mower 1965 Powr Kraft gold with crank wind starter. It’s cool. It reminds me of the mower my Dad had about 1970.

@andrewnorris1514 2 жыл бұрын

We had our first 4 stroke in 67. A wind up toro Whirlwind 19 inch 3 hp tecumseh. Half as good as the available Briggs. The wind up system was a Joke just a novelty that's all

@stevanrose7439 2 жыл бұрын

I don’t remember what brand of mower it was but we had a wind up mower too back in the day.

@stclairstclair 2 жыл бұрын

I'm still kicking my ass for not saving the two wind up covers I had as a kid!

@markrandall1456 2 жыл бұрын

My dad had one of those 19" Toros. He bought it in 66 or 67. There was no scalp disc on the blade that I remember. Also the blade was S shaped. He used a side bagger. He mower with that mower until 1990 and sold it to another guy at a garage sale. Always easy to start and so light. The original Toro wheels were wider so they didn't leave marks on the lawn. He had the Tekumish engine with the exhaust through the deck. Thanks for the memories.

@YooTooobJeff Жыл бұрын

They did have S shaped blades, remember seeing one for the first time and thought Toro must have some good engineers

@Shawnee.Hills.Small.Engine 2 жыл бұрын

It's definitely worth polishing. Rebuild the engine, clean and paint everything, new blade, new decals. It's a classic.

@davidcrosby8552 2 жыл бұрын

This was the first machine I was ever trusted with. My dad's old toro mower. Fills me with joy to hear the sound of it running. Really takes me back. :) Thanks so much!

@andrewnorris1514 2 жыл бұрын

My earliest memories are fresh cut lawns by a rich running 2 stroke Jacobson

@MrVein1983 2 жыл бұрын

Been watching 2 weeks straight of taryl videos since discovering this channel. This dude is awesome. We had one of these mowers growing up and seeing this thing runs brings back fond childhood memories.

@gradyhernandez4699 Жыл бұрын

I like when a mechanic knows both older and new models

@mcarroll598 2 жыл бұрын

It just needed some T.L..C. Taryl loving care!

@andrewwoodward6560 2 жыл бұрын

Once Taryl took the plastic cover off, the machine looked way more familiar. Never see those covers, nice save Taryl and you really got us with " Mr. 🎥 man " ! 👍🙂

@reivertomwilson4959 2 жыл бұрын

I flat wore out one like that bought in 1970. I was the family lawn care expert and was volunteered by Dad at the age of 12. It was bought by Dad at our local family run hardware. It had a different beauty cover, but everything else looks the same. I had flashbacks from the thumbnail!

@patjohnson3100 2 жыл бұрын

Great mechanic and teacher for we DIYers who like the old equipment. I like the detailed instruction TD gives as he goes through the renovation steps. I never knew about wireless tachometers till I subscribed to this channel. I'm glad he saved this perfectly useful mower from the scrap. On another note, the people who designed and engineered these old gas engines were geniuses. The way they operate is so clever. Thanks.

@charger19691 2 жыл бұрын

Everytime I see these old Briggs style lawnmower engines, I’m instantly taken back to the 1970’s and I’m 10 years old dragging home an old lawnmower that someone threw away at spring cleanup and I worked on that mower till I made it run. I even had one that had a crank up style start, 2 hp Briggs. Those were the days!

@gamerX-wk7ct 2 жыл бұрын

yes the crank up style had a couple of them that were given to me around that time everyone knew I like working on small engines . myself I wish I could go back to 86 when I was 10

@topshopbuildandfabricate24 2 жыл бұрын

Me to I remember pushing our mover through the neighborhood knocking on doors trying to get $5 but i usually had to take whatever you could get usually $3 lol but u could geta gallon of good fuel not this crap u get today 35 cents

@kentuckycornbread8502 2 жыл бұрын

That ending with the “camera man” was freak’n hilarious. Whoever made that camera head did a good job. That was also another good repair on a mower.

@stclairstclair 2 жыл бұрын

But by the way he was jumping around I knew it was slippers HaHa!

@jeffryblackmon4846 2 жыл бұрын

The mower us not a "turd," it's a "classic!" Thanks for another great video. In particular, your detailed explanations during each stage of work as you returned this machine to operating condition were superb. Mr Cameraman's work was also high quality. Thanks once more.

@onewhitestone 2 жыл бұрын

Wow, this brought back a lot of memories. I worked on these engines for many years when I first started working. Its amazing that there are some left out there and still running. Thanks.

@jeremyedgell9989 2 жыл бұрын

On these older models, I just go ahead and convert theme to electronic ignition. Do away with the old points. Always keep plenty of used coils on hand.

@jjskogen74 2 жыл бұрын

Me too. Easy fix.

@Billby61 2 жыл бұрын

You took the words right out of my mouth! Electronic ignition and the module is very inexpensive.

@RBTrujillo1 2 жыл бұрын

Any equipment you touch (repair), you make it into gold! Great job Sir!

@kevinkutz5707 2 жыл бұрын

Best entertaining small engine channel hands down! Keep em coming, Taryl!

@howardkoster4026 2 жыл бұрын

Oh good GOD! We HAD that very Toro! It lasted 17 years. VERY good machine!! Ours had the front wheel drive.. I called it the 'VEGA" because it puffed blue smoke out of the muffler like the Vegas did......

@michaelvrooman5681 2 жыл бұрын

Those old Toro decks are the best i have ever used. Mine had a 3 hp Tecumseh.

@larrycroft470 2 жыл бұрын

Another entertaining video from the multi talented Dactyl family!!! I am not the longest tenured subscriber but i consider myself The Dactyl family's most enthusiastic fan!!! Thank you fellows for another great video. Y'all not only entertain & educate but you are creating a good source of information for the history of small engines & their uses. Most likely Taryl Dactyl will be referenced by future generations for years to come!!! Thank you for sharing your wisdom Mr. D.

@locnar1912 2 жыл бұрын

Hey Taryl! We had that exact mower when I was a kid. I put in a lot of steps behind the ol' Whirlwind. I had a good little business cutting neighborhood lawns. Thanks for being back good memories 👍

@markgeorge3960 2 жыл бұрын

For trimming, you can't beat a 19" mower. Light and maneuverable. My favorite was a Jacobsen, but Snapper made a good one, too. Great video - thanks!

@dalewhitaker1 2 жыл бұрын

My Dad was a Toro dealer for years... The wash out plug is a sign of just how good a piece of equipment Toro was turning out back then . My Dad sold a LOT of side discharge 19's and 21's . We actually had 2 or 3 customers cut off fingers using the wash out plug. Another sign of quality and I'm surprised Taryl did not mention it is the "Anti-Scalp disc" . That 50 cent piece of metal was a huge selling point that would usually ace the sale.. . The good old days

@danbasta3677 Жыл бұрын

Toro, wanted to have a riding tractor in their division and successfully purchased the Wheel Horse tractor which became a part of their division of lawn mower products.

@iamburl2667 2 жыл бұрын

Taryl your so down to earth and your knowledge is more than any internet could compare, you are thee ultranet in engine experience, thank you sir for sharing your gifts, your a great gift and are appreciated much, thank you and your whole family

@dave1135 2 жыл бұрын

Always loved that style of recoil on those mowers, something about how it looked just appealed to me, and the sound when you pulled it, reminded me of starting my mom's lawn boy 2 stroke mowers she used in her lawn care business

@topshopbuildandfabricate24 2 жыл бұрын

Could you imagine someone driving down the street seeing you mowing snow at your house you wouldn't have to worry about coming over to say hi lol

@mjg263 2 жыл бұрын

Yep, this exact mower also came with a Tecumseh LAV30 engine with an under deck muffler, I had one for many years. Mine was from 1969 and had a vertical pull starter but the ones from 1967 and earlier had crank-up impulse starters. Once it was all cranked up you would release the starter by setting the throttle control to the choke position. That mower you have was also available with a green deck and a blue shroud, they called it a Toro Fiesta mower.

@rverro8478 2 жыл бұрын

Yeah ! As a kid, we had one of those wind-up starter crank thing. It quite scared me when the release knob wasn't turned all the way out.

@thedillestpickle 2 жыл бұрын

Yikes that sounds dangerous. Those magnesium decks seem to add a lot of years to the mower. I have an old mower in my garage that I'm about to get started on fixing. It has a 2-stroke Suzuki engine and a magnesium deck. Pretty cool!

@campbellpaul 2 жыл бұрын

@@thedillestpickle Hang on to that Suzuki engine, they are hard to come by. I am working on finding an aftermarket carburetor or needle/seat valve for one of those as they are obsolete.

@thedillestpickle 2 жыл бұрын

@@campbellpaul No luck so far? I just spend an hour poking around and the carb bowl is completely missing along with the rubber seal for the bowl, and the nut. Big ding on the blade, so I'm thinking something a rock was struck, and its quite stiff to turn the engine over. This might be quite an overhaul.

@campbellpaul 2 жыл бұрын

@@thedillestpickle If you remove the three machine screws securing the starter cup you can see if the tiny key on the crank was sheared. I own one with a working carburetor and another with a leaking carburetor. I'm squeamish to remove the carburetor studs (by locking two nuts together) as they are torqued really tight.

@jamesadams2333 2 жыл бұрын

Definitely an interesting episode I tell ya. It’s nice to see this old mowers come to life. Such nostalgia! Well done.

@paulgrimes212 2 жыл бұрын

It would be interesting to see how you drill out the broken screw.

@jeffclark2725 2 жыл бұрын

Just a small left hand drill bit or a dreamil tool, really easy

@frankoch1 2 жыл бұрын

that mower deck design works very well--and obviously lasts forever

@johnrose3169 2 жыл бұрын

Nice mower - my dad had a 21 inch Whirlwind push mower of the same vintage with a side bagger. Our 21 inch model had a Briggs like the one in the video and was equipped with a dipstick also. We moved into a home with a half acre lawn and the mower sure got some hours on it cutting the grass. It was the first lawn mower I mowed with. I took it to small engine class in high school when it was roughly 14 years old. It was the first small engine I overhauled. The mower was used for another 5 - 6 years until my father replaced it. The mower lasted 20 plus years - the deck was still good when the engine was wore out. I haven't seen one of those Whirlwinds in nearly 30 years. The sight of that thing sure brought back some memories.

@andersforrad 2 жыл бұрын

I love these antique stuff, quality was on anoher level. Cheers from Sweden 🇸🇪

@maggiealena Жыл бұрын

Thank you Taryldactayl for all the humor and excellent teaching skills. These instructional videos are a great help. Bless your heart.

@klepper00 2 жыл бұрын

The 1967 crank start version was the first lawn mower mower I ever used back in the good old days . 😁

@andrewnorris1514 2 жыл бұрын

My Dad thought they were great cuz he didn't have to use it. The crank system Not So Good

@thebeardedstork432 2 жыл бұрын

You know, I am not personally a big fan of the "theatrics" in these videos (although in this one it was minimal), but your level of knowledge and the video production is amazing! I can tell just how well you really know your stuff, so this is what keeps me coming back for more! Great job! Thanks for sharing your knowledge, Sir!

@frankr.1594 2 жыл бұрын

52:53 was the first time I could laugh from up the war did start. Many thanks for that you Taryl team.

@thenorthshore6472 2 жыл бұрын

I was 7 years old in 1973 and with my Dad when he bought one of these at the Toro dealer. It was light but underpowered, especially in tall grass. Ran great tho up until about 1988 when I accidentally hit a steel pipe, property marker with it. Broke the crank. Cool to see these still up and running today. Gotta love it!

@andrewnorris1514 2 жыл бұрын

Probably just sheared the flywheel key

@jasonk5979 2 жыл бұрын

I used one as a kid that I inherited from my grandfather. I hated that mower. Lol. Got rid of it years ago. Now I kinda wish I had it back. Had some unusual features. Oil bath carburator air cleaner. The exhaust went under the deck. Wind up starter that never worked right. A oil reservoir. That was supposed to keep you from measuring the oil with a dipstick. Had a push button. And for the 1960s had a wash out port for a hose to clean out the grass.

@tspezia Жыл бұрын

I have a Toro 21 (1975 model) My dad bought it new. Still runs and I used it to trim after mowing tonight. My Toro internally is just like the one in the video. Now I know a little more about points and condensers! Thanks Taryl

@SoddingaboutSi 2 жыл бұрын

These were one of the engines I liked to work on. Great engines.

@bigray2859 2 жыл бұрын

Watching you mow snow brought an old memory. I was at a rummage sale a lo-ong time ago and saw a blade for a lawn mower for sale. It was in the box with instructions etc. It was promoted as a blade that you could mount on your push mower to throw snow. I don't think it would work here in northern Wisconsin :-).

@patrickwilliams6774 2 жыл бұрын

Those 3and half horse power lawn mowers were pretty hardy. I mowed a bunch of fields with my 3.5 hp mowers and they came back for more!

@elit3401 Жыл бұрын

Good job! Always love to see old mowers come to life again.

@DIZ4SHIZNITS 2 жыл бұрын

Taryl is the MAN!!!! Nice job bringing ol girl back👍

@oscarjones5773 2 жыл бұрын

GREAT WORK with the beginning and camera filming. LOVE IT.

@briannickels7408 2 жыл бұрын

I worked on tons of this style Toro Briggs as “Ditchmasters” , when you wanted to mow an area that had a sloping drop this was a nice light mower to use as a ruff cut. Took me a while to figure out the “preload” on the diaphragm but it was a pretty good engine/work horse for a non manicured yard.

@paulpitmon6663 Жыл бұрын

I watch most all your videos, but I really love the ones that you get old stuff going. Thanks

@brucepeebles4939 2 жыл бұрын

The toro 'claim to fame' was their mowdecks. The cast aluminum vacuuming was FAR superior to contemporary stamped steel decks. (I still think OMC had them beat with their Lawnboy engines)

@dalewhitaker1 2 жыл бұрын

The "windtunnel" aluminum deck was great.... Had Snapper beat 2 to 1 back in the day

@jontrenthem3751 2 жыл бұрын

I was just thinking how good the deck looked. Was just working on mower with deck all rusted out. Most mowers now are just disposable.

@ohiofarmer5918 2 жыл бұрын

These may have been underpowered, but they are light as a feather 🪶. Great trim mowers.

@MaxNafeHorsemanship Жыл бұрын

"Underpowered" is a relative term. I had a 3 horse that would eat through anything. It was only an 18 inch blade. Didn't need a big engine to do the job. Sure the swath was smaller, but because you could move faster, it took less time to cut the grass. The smaller mower was also lighter and less work to push.

@frankie7508 2 ай бұрын

It's really unbelievable the depth and history of his expertise and professionalism to be able to repair a Mower that is more than 50 years old! How unique is that talent! Plus all the comedy and levity makes him truly a pleasure to watch this Hillbillie. Fantastic all the way around. 👍👍👍

@davedallara826 2 жыл бұрын

I have a really old whirlwind 2 that still starts, runs, and functions properly. I found it when I was helping my neighbor move. It was buried under a bunch of junk for 10 to 15 years from what they said

@tinkeringtaylor3053 2 жыл бұрын

Well done Taryl saved another from the scrap pile,started fine and sounded great well done to you all

@jlawlar 2 жыл бұрын

the ending🤣 pretty good

@dave1135 2 жыл бұрын

24:31 ah, the good old Briggs 381681 diaphragm kit. I ordered those by the 2 dozen every month back in the 80s

@karatejoe5049 2 жыл бұрын

"Adhesive Glue". I hate it when glue isn't adhesive.

@AntiqueCarsandStuff 2 жыл бұрын

We enjoy your videos! Thanks.

@davidfoster6803 2 жыл бұрын

I like that Taryl works on the old stuff and the new stuff .

@brentsmith5647 2 жыл бұрын

Brilliant video thank you 😍😀😀😀😀😀😀😁😁😁😁😄😄😄😄😄👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@robertmedina6875 2 жыл бұрын

Your video will ensure that a whole new generation will be opening repair shops for the future!! Great video!! Thank you !!✌️😊

@lukeskywalker7566 2 жыл бұрын

Nice to have new video from Taryl very honest show when things goes south he just sorts it out cheers from a Brit who does not have the accent cheers all

@lawrencedriver623 2 жыл бұрын

Hi, love you guys please keep up the good work, love your videos. Thank you

@garygag739 Жыл бұрын

Love from England taryl great video thanks.

@topshopbuildandfabricate24 2 жыл бұрын

Yes he is very much honest i have been a mechanic and shop owner and i can tell he is a down to earth nice guy but make no mistake he's not going to let anyone run over him and he will help u out as much as possible

@korhing1066 Жыл бұрын

Taryl you are self made man and a master Mechanic I have learn so much from you and I am 73 years old Thank You Sir I love your channel

@iceman9549 2 жыл бұрын

Awesome video Taryl 👍👍🍿👀

@OQTIZZLE_ORLANDO 2 жыл бұрын

Love the skits! Lol. So meta.

@f62darkstar 2 жыл бұрын

I got some of those vintage cable clamps from you for my 81 White Outdoor products track drive snow blower I recently restored....works great and looks great....thank you.

@tombarker2369 2 жыл бұрын

love the black and white video insert!!!

@johnmack1399 2 жыл бұрын

Love the vids, good job boys!

@ronniekeener3802 2 жыл бұрын

Great video thanks Taryl. I found out from another youtuber how to bring that old chrome back around to use WD-40 and aluminum foil. Spray it down and scrub it with aluminum foil.

@ericgilhart5951 3 ай бұрын

I love seeing old machine's come back to life

@johnbrisker5584 2 жыл бұрын

Great video!!FINALY GET TO SEE MR CAMERA MAN.😂

@thunderroad7289 2 жыл бұрын

I like the recoil on that old mower. I was 7 years old when that mower was new lol. We actually had that model. Pretty neat seeing that old model. Finally got to see camera man 😂😂😂

@canamforlife2275 2 жыл бұрын

Man taryl has all kinds of new old stock wow ......pure gold

@mackmackallthewayback69 2 жыл бұрын

I want that Toro Taryl! Great video. Thank you

@davida1hiwaaynet Жыл бұрын

Very nice repair! I remember when those were the current model Briggs engine. Still have one! I laughed a lot at your mowing snow!

@dirtyaznstyle4156 2 жыл бұрын

This is the best way to learn something, you can learn procedures from service manuals but it’s those little tricks or tips someone with experience can give you

@scottjones7279 2 жыл бұрын

So proud to have you in the left handed brotherhood 😊

@mickdog2 2 жыл бұрын

it's fun to work on the old stuff occasionally. I've got the mower engine I bought (the only mower I've bought) in 1991, it's the same number, but from 74

@tommybounds3220 2 жыл бұрын

Thank you for the video.

@lovmytruck Жыл бұрын

Great Job Taryl.

@robertosborn6295 2 жыл бұрын

Love the cameraman he has steady hands and tell him I said keep up the good work.

@russjones45 2 жыл бұрын

I love the new turd polishing series

@danielriley5083 2 жыл бұрын

Them cast metal decks were awesome.

@bassettraceengines 2 жыл бұрын

Had one almost like that when I was a kid. Best lawn mower I ever had.

@williamsouthworth5275 2 жыл бұрын

Man I can hear that spark!

@jeffpiatt3879 2 жыл бұрын

The B&S "L head" motors were truly amazing. If a person changed the oil once a year and cleaned the air filter (and didn't hit something solid that bent the shaft) those motors would literally run for ever with only the occasional points and condenser and, rarely, an exhaust valve job. I had one of these already 10 years old used motors as a 7 year old kid and I mowed yards in my neighborhood for the next 10 years with it. The motor wore out 3 different decks. I ended up giving it to an ex girlfriend. It burned some oil but still ran well.

@andrewnorris1514 2 жыл бұрын

I sure do miss that Girlfreind

@jeffpiatt3879 2 жыл бұрын

@@andrewnorris1514 LMAO!!! Yeah, she was good, but crazy!! I have a wife now, and she is sane- a rare commodity.

@hm2mikeperry 2 жыл бұрын

i wish you wouldv'e showed us that recoil up close and explained the operation. never seen one like it. love your vids

@jimmyguy428 2 жыл бұрын

That old Briggs Sounds really good! The movie "Stone Cold" was actually a pretty good flick, and had a good cast as well.

@XCRiders 2 жыл бұрын

Love it I have and use a 1993 Toro 22040 pro line with a 2cycle Suzuki 5 horse (underrated) runs perfect I have had to take the carb a traitor apart it’s my favorite

@FirebirdRestores 2 жыл бұрын

This is the closest engine I've found to my snapper, thanks for showing how it works on depth, only thing I need to figure out now is how to adjust my carb like you did

@Guillotines_For_Globalists 2 жыл бұрын

I have a Craftsman edger that uses a similar motor. Rebuilt the carburetor with the gaskets and the diaphragm and a new primer bulb and air filter too. Runs great but normally needs starting fluid to get going. Last year the blade shaft broke in half, it's a shaft with a threaded rod at each end for attaching the pulley and the blade. I had to scramble to find a local small time machine shop. Found a guy in Highland who was closing up shop for good in a few weeks. I think he repaired it for $30 but that was basically finding a needle in a haystack. Most machine shops don't even want to touch it and if they do they want to charge you 300% the cost of the machine in the first place, in my experience at least.

@andrewnorris1514 2 жыл бұрын

Enjoyed Taryl threatening the camera man. Another Great Video Thankyou

@harrysoper6736 2 жыл бұрын

Remember using an older version Toro that had gas tank mounted on handle bars. Thing would go through 2 ft grass and never miss a beat.

@sigmundblank7403 2 жыл бұрын

24:52 You missed an opportunity for the spring sound effect. I Really look forward to my Sunday morning grass rats these days Taryl and crew. Thanks .

@joemcintyre2090 2 жыл бұрын

In my 5 years of being a grass rat I have not the privilege of messing with any small engines with points. Thanks to you Taryl I'll know haw to fix em when I do. I remember back in the day when I had cars with points. I hated chevy's because they were on the backside of the motor. Thanks Taryl

@randallcarney1216 2 жыл бұрын

Most people just deleat them with the electronic magneto , magnetron on the old Briggs flatheads.

@NY411Info 2 жыл бұрын

The one I had was the one with the Tecumseh engine. The whole thing went to the dump in the early 80's. I tried to re-power it with a Briggs at the time, but the crank was too long, if I remember correctly.

@waiting4aliens 2 жыл бұрын

I have one, without the plastique cover. Long gone. Great little trimming mover, magnesium deck I think? Mine is Briggs too. Good video, thanks.

@michaelglynn2638 2 жыл бұрын

Heheh, great one guys. Love to see this older stuff brought back to life. It looks well used, did I detect a slight knock?

@jeffleggitt7065 2 жыл бұрын

I had one of these in HighSchool. I cut grass in the summers and bought a 77 Camaro. Great car great mower. I have always had Toro mowers since those days