AE86 vintage nostalgia build. part 2. Webers and first startup!

Рет қаралды 128,454

Жыл бұрын

We dive back into my AE86 corolla build! We've already done cam's in our little 4age, now we add dual side draft webber 48DCO's, an ignition box and fire it up for the first time!
B'laster Corp Products! - blastergear.itemorder.com/sho...
Magnetic Koozies! - garagebuiltco.com
Tools Used
Milwaukee Bandsaw - amzn.to/2Zqn4OU With This Stand - amzn.to/3d5bqNv
Cheap Plasma Cutter - amzn.to/3hJdbS7
Milwauke Tool Die Grinder - amzn.to/2MoAQu9
Milwaukee Tool Headlamp - amzn.to/2xUWthH
Small Milwaukee Flood Light - amzn.to/2Sf39Ox
Milwaukee Tool Underhood Light - amzn.to/3f5K6jw
Milwaukee Tool Mid Torque 1/2" Impact(2861-20) amzn.to/3b1bqwG
Milwaukee Tool Stubby 3/8" Impact (Small Most Used Tool)- amzn.to/2Jdirid
Milwauke Tool 3/8" Ratchet (Life Changing) - amzn.to/2JcpQhy
Milwaukee Tool 1/4" Ratchet - amzn.to/35VZM41
Milwaukee Tool Ratchet Wrenches - amzn.to/2CYRFKz
M12 Drill/Driver - amzn.to/35QVZoR
M18 Drill/Driver - amzn.to/2p6WuKJ
Gearwrench 3/8 Socket Set Mid Length (Very Nice Sockets) - amzn.to/2VnbMHm
Gearwrench 3/8 Socket Set Deep - amzn.to/3b1pFBH
Multiprocess Welder - amzn.to/3g6y5dK
Drill Bits - amzn.to/3fc4DkZ
Thanks to all who support me on Patreon! - www.patreon.com/taylordrifts?...
IG - / taylordrifts
Twitter - / taylordrifts
Email For business Inquires - taylordrifts@gmail.com

Пікірлер: 387

@smithshift386 Жыл бұрын

I'm so happy to finally see someone keep the 4AG and actually show what it can do.

@Burley_Bert Жыл бұрын

Well it can do everything 120hp can do, It's all about the sound!

@bossvitorcunha Жыл бұрын

you can check my channel for more 4age 7age content 😅

@bossvitorcunha Жыл бұрын

@@RobertLiggett thats not the point of this car

@danielamorim2909 Жыл бұрын

I know right. The 4AGE is always so easily over looked. Not saying that it will make a million horsepower, because it won't, but the rawness and simplicity of the 4AGE is hard to beat. And the sound, don't even get me started!

@RobertLiggett Жыл бұрын

@@danielamorim2909 4ag is good I honestly would take a ae86 with a Northstar v8 if I could lol I just wanted to see what would happen if I brought up jimmy oaks 86

@user-tw9su8rb9j Жыл бұрын

I remember Taylor saying no engine degreaser works good that’s why he buys the oven cleaner’s from the dollar store😅

@andrewkelly3702 Жыл бұрын

Same lol especially the 5 billion times he pulled the engine when the Miata had a turbo

@patonb Жыл бұрын

True, butt Oven cleaner is an entirely different use. It's more of a heavy degreaser/cleaner and needs to be washed after with water.

@i-_-am-_-g1467 Жыл бұрын

@@patonb exactly this, "oven cleaner/lye" is sodium hydroxide which is a corrosive and will eat aluminium for breakfast, people use it to remove aluminium clots from metal files. A good brake cleaner is just a denatured alcohol with no additive (cheap ones will include crap like chlorine which leaves a white residue when dry)

@DaveScottADV Жыл бұрын

Yeah be very careful with aluminum. oven cleaner etched some of the aluminum parts on my 4g63 pretty badly.

@Taylordrifts Жыл бұрын

That was also before I found this. All the ones I had tried were useless. Oven cleaner was just the move because it was a dollar at the dollar store. Lol

@Frank-oz7ph Жыл бұрын

shout out Josue for always being there to help

@watersmart1 Жыл бұрын

48 DCOEs are kinda big for that engine. Lots of jetting ahead and perhaps some different chokes.

@brucepeters631 Жыл бұрын

Shoutout to the blaster Corp. I live in the north east so you know I’ve been good friends with pb blaster since my first wrenches turned on my first car.

@SirVic42 Жыл бұрын

Second that shout out. It's a great match of product and promoter, as Taylor obviously loves using their stuff and provides great demonstrations of it in action.

@Featherdwlf Жыл бұрын

I third this as someone who lives in the north Midwest

@AJ-nh8ik Жыл бұрын

I just love that there are still some people around who are keeping the classics alive. Late 80s thru 2000 was the pinnacle of JDM vehicles. Sometimes I wish I never got rid of mine. I would've had a nasty rotary swap in it if I would have kept it, but I had found an FC at the right price at the right time.

@JamieRogers95 Жыл бұрын

I really enjoy this "breaking my own rules" kind of build. I can imagine its so easy to follow a formula that keeps the hate comments low but it's refreshing to see someone build a car the way I would - kinda sketchy but enjoyable and not chasing figures

@waynemangion1487 Жыл бұрын

I love watching peoples builds. Can I suggest two things: 1/ twin carbs accelerator linkage is better pulled from the middle of the two carbs. Off the side can cause twisted shafts. 2/ I hope you are going to make a shield over that msd box. Carbs sneezing fuel over an electrical box may not be ideal

@IDlikeanEvo Жыл бұрын

I love the way you approach your build, step by step with a lot of logic and calculation before starting to work on something. Its easy to say that its not your first rodeo, I've been following you for the last 7 years and you've come so far ! Awesome to see you work ! Love the new merch and the upcoming buid/content keep it up man.

@IDlikeanEvo Жыл бұрын

@Greg Jenko I wont try to change your mind and change your opinion ! But as you said if you're a new viewer , stick around ! You'll see what a mean, a car is not build/tested in 1 week with only a one guy army :) there's a procedure before making a car crazy or to dump 30k in it just like that, he has other things to focus and build on his channel ! We can't really blame him for leaving a car in the back for X period of time and start piling pieces for it in the back ,while working on something elses ! And as far as saying "winging it" its the 2nd video on the 86 lol , he just came out a 51 videos series just for the vette.. If that's just winging it, he got alot of Wing to give ! Anyway I can understand what u say

@IDlikeanEvo Жыл бұрын

@Greg Jenko no worries ,i'm not offended and you're making good points ! Its good geting different point of view , even for Taylor , he can read that and evolve around what new viewer feel ! Constructive comment are always the best one ! ' also sorry if I type weird , i'm french '

@ogfromutube9649 Жыл бұрын

I'll tell you my dad went to u of c back in 69 for psychology major, was invited as a member of mensia, and left both and toured Alaska. Him and a buddy in an old cj. They'd go town to town and when they ran out of money would settle temporarily and find some work. They made there way from Vermont up over to western Alaska and down through Montana, then down to Arizona and across the south back home. He settled back into Vermont and became a euro mechanic. VW, Mercedes, BMW, Volvo, Saab, even some Alfa Romeo and Corvette's. Now to make a relevant point lol. He always swore by pb blaster over all penetrating oil. This was from the mid 70s until 2020, when finally he actually changed his preference to seafoam deep creep... PB is still a tremendous product but seafoam really stepped it up on there penetrating oil!! Side note: He had a 1984 BMW 2002 with Weber carbs and a vw bus with a Judson supercharger... Now 38 years later I have an LS swapped Volvo 240 and a Volvo S70 T5 that runs low 12's...

@twostrikeHR Жыл бұрын

I can’t wait for Chelsea, Taylor and Jimmy to all drive the 86’s together

@coltengottschalk1049 Жыл бұрын

The fact that I’m watching you build this 86 and jimmy building his is sick.

@beachwoodtire Жыл бұрын

I believe you should be able to get it running without the msd box. With just the old-school coil. If you want even fewer wires. Great build.

@grantschmidt8187 Жыл бұрын

Not counting my chickens before they hatch - Taylor Ray new buzz quote

@nikb412 Жыл бұрын

Side drafts look sharp. At least you found them now, not right after you finish the build

@edwardbusby4401 Жыл бұрын

Awesome to see you and JimmyO working on the 86's. After both are done, there should be a collab!

@shadowred1980 Жыл бұрын

A tip from your motorcycle friends. If you want to run the engine longer use a gravity feed from a container above the carbs. The pump is only needed because the tank is below them. All the best and hope to hear this on the street soon.

@olivermolteno7876 Жыл бұрын

Weber carbs are very sensitive to fuel pressure so it's not ideal to gravity feed these as you get less pressure as the fuel level goes down

@buddyschnaars851 Жыл бұрын

your ""Old School"" mechanical lesson has just started!! wish you all the best! been watching you from day one awsome!!!

@That_gasser_1st_gen Жыл бұрын

I'm so surprised to see a guy build so many EFI cars, then go and convert a car from EFI to carbureted. Keep up the great work Taylor

@mmodtomic7119 Жыл бұрын

Dual Webers like that can be a PITA to keep balanced and tuned. They aren't like fuel injected ITBs. I'm sure with your welder's patience you won't have too many issues.

@GenStrife Жыл бұрын

You could throw a tarp down and at least be able to agitate with a brush and spray clean with a bottle of rinse water. Still a mess, but easier to move the tarp outside and spray it with the hose and some degreaser, lol. Love the work, Taylor! Keep it up dude!

@upurkilt7246 Жыл бұрын

I love a good old set up with carbs coming from a old skool ford background with mk1/mk2 escorts and a plethera of others in scotland. But just as a wee suggestion there is a company that produces a carb setup that is actually fuel injection. Its called the jenvey heritage DCOE throttle body its designed to look like a set of webbers but all the injectors are hidden away inside where the floats and jets would be. Old skool bits with new skool tricks lol.

@CTemple82 Жыл бұрын

When you redo the engine bay to make it all look pretty, you should make a aluminum pedestal stand in the corner near the stock air box location to mount the ignition box. It just looks real temporary sitting down on the frame rail. It will fill that empty area and also help hide that headlight harnesses, then you could run the wires underneath the core support instead of over the engine.

@shannacollins4741 Жыл бұрын

You and Jimmy definitely have to get yalls 86s together when he gets his finished ! Happy to see the AE86 ripping Taylor next up a Levin build ?

@Ghostneocz Жыл бұрын

Dustin is also on his AE86 build

@shannacollins4741 Жыл бұрын

@@Ghostneocz oh yeah damn i forgot about Dustin to your right its gonna be a hella good time with 4 Hachiroku's ripping the back roads if they ever get them all together ! DeNofa has one to ! But personally i think Jimmys would smoke everybody elses 86s just cause the K swap and everybody else is running either stock or slightly modded !

@KableTac Жыл бұрын

jimmy wont ever finish his. the way he talks about it and looks at it it feels more like a youtube video than him actually wanting to do it

@shannacollins4741 Жыл бұрын

@@KableTac he just started fitting the bodykit on it yesterday i hope it gets done and ready to drive soon !

@Taylordrifts Жыл бұрын

I’m excited to drive with Chelsea in his!

@vkwhitehead Жыл бұрын

Would recommend looking at a centre pull throttle on the carbs You will start to run into balancing issues eventually as it puts a lot of load having all the spring pressure on the very end linkages

@Javalitis04 Жыл бұрын

From Florida .. "we're gonna take it to the mountains" .. Kidding. Just sounded funny to be being in Colorado

@thewitt76 Жыл бұрын

I'll never forget the 71 super beetle w dual baby dell carbs me n pops built when I was 16.

@FCKSHT813 Жыл бұрын

that feeling OMFG if you know you know that first fire it dont even have to fully run you just know that shts ok that feeling is the best!

@patrykkowalski6 Жыл бұрын

i like the little crusty look. it actually gives the vibe that i think would match this car style. not some shiny showcar everything new but a car thats about feel and driving

@terry2583 Жыл бұрын

I'm from australia.i did this conversion in 1994 .I used a scorcher distributor made over here which doesn't need a msd box or any thing else .has mechanical vacuum advance and is electronic .my smallport happily revved to 8700rpm with a blacktop oil pump .and dual 40 mm delorto 's with 34 mm chokes and 100 jets . Made 165hp atw with stock cams .

@jamest5149 Жыл бұрын

Weld a brace on the throttle cable bracket, it will flex and eventually crack otherwise. Just needs a little triangulation.

@jamiemccolgan2172 Жыл бұрын

Ireland is the place if you are needing parts. They have everything 🙃

@kristofermann2917 Жыл бұрын

the engine bay has got to be metallic gold

@dagnallsingstheblues1783 Жыл бұрын

This was my dream build for so many years, right next to an 80 Toyota long bed with a built 4age

@honxsolo Жыл бұрын

In all honesty I haven’t watched the channel for years now but saw this video pop up and now I’m drawn in. I’m more of a less is more person so seeing more people get into these types of builds excite me. Hope to see a lot more progress with it!

@mc66683 Жыл бұрын

Bet you could make a simple bracket to mount the ignition box next to the fuse box if you wanted to keep it on the same side as the distributor rather than having to route wires across the car.

@monroefive-o40 Жыл бұрын

Mount the MSD box behind the dash or behind the glovebox. I put mine there. Worked out well.

@Danger-Dave Жыл бұрын

Cheering right along with you Taylor! Love this build... you can tell it's going to sound great with just the few rev's on SF! That 1st crank brings big smile's! You're motivating me to order a couple of kits for my twin Solex carb's that need rebuilding and a new brake master cylinder on my 63 Merz Benz 220Sb that's been sitting for years.

@kumag807 Жыл бұрын

Usually we mount msd's inside the cabin. Ex. under the dash 🙂

@jasonmccoy567 Жыл бұрын

I'm so stoked on this one. I've been patiently waiting for ae86 content and now not only are you diving in to it but also Jimmy o. It's perfect. And I love that your both trying to keep the feel of the 86 like it's supposed to be. Even though Jimmy is doing the k swap it's still the same spirit just newer technology

@teshire9075 Жыл бұрын

Gotta love carbs, So simple yet so genius. If you're up for extending the harness, forwards and along the upper radiator support and out the other side so it's mostly tucked out of the way and neat.

@arcadiagreen150 Жыл бұрын

GAS GAS GAS I've got to step on the gas...if you know, firm handshakes

@supragoose_4770 Жыл бұрын

This build is 100% one of my favorites

@koolkar55 Жыл бұрын

OH YEA!!! Webbers for sure.

@thestigsamericancousin4588 Жыл бұрын

I knew it was an ad the first time he said "engine degreaser." Mans is legit the reason I use el-cheapo oven cleaner on my shitboxes

@kristofermann2917 Жыл бұрын

your emotion speaks volumes

@matmichalke5734 Жыл бұрын

I personally really like the expandable wire loom

@devenyasay Жыл бұрын

just a small tip! whenever i am under my car doing anything with liquid ii always put down costco puppy pads! they are freaking amazing and have saved me numerous times.

@riskydevil6486 Жыл бұрын

23:12 is why I'm a toyota fanboy for life

@PB-zb6vr Жыл бұрын

Love those Weber, this is the way to build an 86 imo

@aaronloyd2124 Жыл бұрын

Between you and jimmy oakes y’all are killing the 86 game. Looks super sweet. Keep it up.

@JohnMichael0226 Жыл бұрын

Looks like you may need to swing by Adam’s place for some vapor honing. Can’t wait to see this thing done to the TR spec!

@JDGeorge240sx Жыл бұрын

juust got home from work. Perfect timing !!!

@JettaMK Жыл бұрын

DCOE 45 would most likely be more suited to the engine size. Cant wait to see this thing done.

@brucepeters631 Жыл бұрын

Perfect car to set a lap time at the lz compound.

@DaleBladez Жыл бұрын

I will say this about those magnetic cozies is that they can go about 50mph on the side of your car/truck. Once I left my beer on the side of my truck after wrenching on it. Luckily no one noticed it hahaha. I don’t condone drinking and driving

@alexnorwood5789 Жыл бұрын

@ 7:05, I was literally just telling my coworker today that I'm ordering 2 of those magnetic koozies

@NoLyinEvry1sDyin Жыл бұрын

Hey you and Jimmy are building your 86's at the same time 🤙 Be fun to see the similarities and differences 😀

@Sleepy_Otter Жыл бұрын

Yeah I love watching both builds! Two different build goals too, Jimmy's will be a fast track car with the K24, Taylor's will be a sweet classy street car and probably sound a lot cooler. Both are cool as heck!

@talham709 Жыл бұрын

Adam just got one as well!

@Sleepy_Otter Жыл бұрын

@@talham709 It would be so cool to see the three of them tandem AE86s, although the power level and grip differences might make that tricky.

@kurtseyffert6649 Жыл бұрын

@@talham709 nope he sent that pos back to japan

@kelvinarreola Жыл бұрын

Get it running! Then make it look nice! Some people have that backwards!

@mattrogers1902 Жыл бұрын

Make a Mount so the box sits on the side of the fuse box. That would be a tidy and functional location!

@andrewilliams3406 Жыл бұрын

Ok I’ve subscribed a while ago I’m turning on notifications now. My best memories involved side drafts and 4AGEs

@Ducaducs100 Жыл бұрын

Love the capt ron reference

@iankenney6515 Жыл бұрын

Man. I've learned a lot from your videos and I enjoy them. "That being said"; If I took a drink every time you used ^^^ that space filler I wouldn't be able to stand after every video.

@josuevelazquez5465 Жыл бұрын

Soy de Puerto Rico,Toyota coqui es un icono en PR todavía hay muchos 😎🏁

@gemini3558 Жыл бұрын

This build brings back memories as my first car was Datsun 510/1600 fj20 with twin 40mm Webber’s !!! The induction noise was epic and so much fun to drive, it would cruise down the freeways at 100mph with ease !!! Miss that car so badly 😜👍🇦🇺

@paulmiranda3281 Жыл бұрын

Yes makes me miss my P510 worked L18 with twin 40mm so much fun, the good ol days

@ogfromutube9649 Жыл бұрын

I have used the cloth tape several times and it has lasted a few years really well so far..

@Carnerd101 Жыл бұрын

Enough Jibber-Jabber!

@mateodavid1967 Жыл бұрын

Truly hope you go full send on this build. 4AGE build with all the fruit will be awesome.

@dudu99cavalli Жыл бұрын

favorite build on KZfaq by far

@bingwrite Жыл бұрын

new t-shirt idea: "In this scenario, it's actually ideal!" dude, absolutely loving this content lately! you gotta come sling this thing at the compound, I'm only like 5 mins away and would love to see you out there!

@cutegamerboy Жыл бұрын

You and Jimmy both today haha. AE86 content has been top notch

@MiGujack3 Жыл бұрын

Can't wait to hear the tofu machine iconic sound.

@sasha-taylor Жыл бұрын

I really loved the raw giddy excitement in this one. I feel like you needed this after the Vette build, that was the ultimate dream project but these kinds of things seem like they ultimately put the most smiles on faces

@teemoL Жыл бұрын

I believe you and @garage4age would be good friends. Thanks always for the wonderful content sir.

@wobblysauce Жыл бұрын

Remote start wire… easy to make and will gets rid of the worrying, can even make it a duel switch, ign and start.

@rickhawkins8671 Жыл бұрын

Wow... enjoying this way more than I thought I would!!! Awsome little ripper mate!!!

@jimmyt7758 Жыл бұрын

So hyped for the vids on this car, keep it up loving the build

@jaredlutz787 Жыл бұрын

You should really consider mounting that msd box inside the car. In hotter climates combined with underhood heat they can overheat and shut off leaving you stranded. Went through 3 boxes on a toyota pickup with Webber’s. MSD said I was crazy. On box #4 I mounted it in the cab and never had an issue again. Granted it was in the desert of SoCal and regularly hit 120* But as soon as it would hit 100* ambient problems would start.

@boostcontrols3937 Жыл бұрын

It's going to be awesome man!

@DRIFTSUN Жыл бұрын

im from the Datsun world.. webbers are great!! Gday from Tasmania!

@Adam_B Жыл бұрын

Love the carb setup!

@smglz Жыл бұрын

I am extremely pumped about this build

@talham709 Жыл бұрын

This is gonna be freaking sick!

@sethgoulet4410 Жыл бұрын

23:00 pure joy lol

@3wbasie Жыл бұрын

The webers are sick!!!!!

@JohnRoberts71 Жыл бұрын

Great content thanks for sharing. Happy New Year to Sandy and the rest of the family.

@brano_1410 Жыл бұрын

cant wait to see you drive the 86! it looks so cool!

@XplicitVoltz Жыл бұрын

Refreshing seeing some old school tech on KZfaq

@geoffreyadams6236 Жыл бұрын

Yep, of all the cool projects you do this is the one that has gotten me the most excited when I saw a new video. I guess I'm an old car person. The second time you sprayed starting fluid in the carbs I'm sitting here on the couch saying "fill the bowls up with fuel!". Cheers bud.