Upgrading the Turbo LS street truck. It’s so much faster now

Рет қаралды 134,596

5 ай бұрын

We finish out the E85 flexfuel fuel system, fabricate some new parts and then test out the 2000 Chevrolet Silverado 1500 RCSB Turbo LQ9 Street Truck!
You can buy some merch and help support the channel! - garagebuiltco.com
Tools Used
Milwaukee Bandsaw - amzn.to/2Zqn4OU With This Stand - amzn.to/3d5bqNv
Cheap Plasma Cutter - amzn.to/3hJdbS7
Milwauke Tool Die Grinder - amzn.to/2MoAQu9
Milwaukee Tool Headlamp - amzn.to/2xUWthH
Small Milwaukee Flood Light - amzn.to/2Sf39Ox
Milwaukee Tool Underhood Light - amzn.to/3f5K6jw
Milwaukee Tool Mid Torque 1/2" Impact(2861-20) amzn.to/3b1bqwG
Milwaukee Tool Stubby 3/8" Impact (Small Most Used Tool)- amzn.to/2Jdirid
Milwauke Tool 3/8" Ratchet (Life Changing) - amzn.to/2JcpQhy
Milwaukee Tool 1/4" Ratchet - amzn.to/35VZM41
Milwaukee Tool Ratchet Wrenches - amzn.to/2CYRFKz
M12 Drill/Driver - amzn.to/35QVZoR
M18 Drill/Driver - amzn.to/2p6WuKJ
Gearwrench 3/8 Socket Set Mid Length (Very Nice Sockets) - amzn.to/2VnbMHm
Gearwrench 3/8 Socket Set Deep - amzn.to/3b1pFBH
Multiprocess Welder - amzn.to/3g6y5dK
Drill Bits - amzn.to/3fc4DkZ
Thanks to all who support me on Patreon! - www.patreon.com/taylordrifts?...
IG - / taylordrifts
Twitter - / taylordrifts
Email For business Inquires - taylordrifts@gmail.com

Пікірлер: 419

@ryanzhang4897 5 ай бұрын

Got this notification right as I sat down on the toilet 🙏🙏

@natesantana7783 5 ай бұрын

Hell yeah man have a great shit!!!

@scottschneider4144 5 ай бұрын

Me too bro me too!😂💩

@matthewsumrall4625 5 ай бұрын

Same😂

@2lpwr 5 ай бұрын

Same brother 🤣🤣

@jeffcooley2389 5 ай бұрын

Damn we’re shity

@jamesshirley5875 5 ай бұрын

I guess you’re right, that’s exactly how me and my wife fabricated our kids! In and out,in and out! Never thought about it like that

@kennethporst4359 5 ай бұрын

Hey, wait a second

@Sun-ut9gr 5 ай бұрын

The ol' in-out in-out! Right right?!

@JWbrasser 5 ай бұрын

bro your wife fabricated the kids, all you did was provide half the blue print

@Wyfiman 5 ай бұрын

Your dad was like "aint nothing to it but to get to it"

@morgandixon5073 5 ай бұрын

Hey Taylor, the reason those harness plugs on the transmission are so “melty” as you say in the video is because they come from the factory with hot melt wax in those connectors. Use a heat gun on them and wedge them in while they cool.

@954ethan3 5 ай бұрын

Exactly

@brodiemcpherson6467 5 ай бұрын

you almost need to heat them to seat properly sometimes

@wobblysauce 5 ай бұрын

Keeps the crud out

@newfiedude 5 ай бұрын

I had an old man teach me this and i've mentioned it to other techs before and they look at me like i have two heads.

@morgandixon5073 4 ай бұрын

@@brodiemcpherson6467 you always need to heat them each and every time you connect or disconnect them.

@proudpennsylvaniaman7996 5 ай бұрын

I think that bend piece needs gusset

@crocketmannn8271 5 ай бұрын

your channel is one of a very very very select few that i dont kinda skip around through the videos. everything is so informative and satisfying to watch bc i am exactly the same away about most of the things you do

@alexfigy5355 5 ай бұрын

The transmission connectors have an adhesive glue from the factory on them that usually you heat them up with a heat gun or mini torch to get them to go back in all the way. Good work!

@BradleyPeterson202 5 ай бұрын

Watched this video about 15 minutes after you, I just commented the same thing before scrolling into comments haha

@pieterv6984 5 ай бұрын

I love how you switch back and forth with timelapse and regular speed on the edit. Makes it very smooth to watch. Great truck.

@beratsbuilds 5 ай бұрын

The transmission mount was the second most anticipated project after the Loft. Still waiting on it 😀

@ghostdog662 5 ай бұрын

You should make a cover for your surge tank.

@wotfandom9360 5 ай бұрын

My thoughts exactly. Good idea to protect it even if you never use the bed for carrying anything but still good to protect it from outside interference.

@Woodie-xq1ew 5 ай бұрын

Yeah make sure there is no way any water can get into the tank because that would be a pain in the arse

@dannmohr5721 5 ай бұрын

The “Green Machine” is moving right up in performance…….Kudos Taylor……👍🇺🇸🏁👍🇺🇸🏁👍🇺🇸🏁👍🇺🇸🏁

@koolkar55 5 ай бұрын

Maybe a truck for Sick Week next time it's on? This would be perfect for Drag & Drive events. Great work Taylor. Billy J.... Queensland, Australia.

@richardfarmer6570 5 ай бұрын

I lived in Florida for 15 years and I remember that February was usually really nice, enjoy it before the heat comes back.

@nicevans6827 5 ай бұрын

I hate to be an armchair fabricator, but surely that bent plate that the transmission mounts to needs some gussets?

@406RamsFan 5 ай бұрын

My thoughts exactly. I am not a fabricator but I would add gussets for sure

@Silverhaze78 5 ай бұрын

Especially for a truck that's going to get drag raced. It shouldn't deflect at all.

@Andrewlang90 5 ай бұрын

Being that it’s basically a support for something that already has multiple attachments on the vehicle, and it’s bolted to the frame, gussets aren’t necessary.

@wrexz 5 ай бұрын

Yea, if the transmission rocks or twists especially on hard launches it might break a weld at some point

@richardt3744 5 ай бұрын

Yup... that's a weak point for sure.

@davidcrawford872 5 ай бұрын

That black surge tank in the bed is going to collect alot of heat in sun. I'm sure you have a creative solution to sheild it from the elements. 😊

@Dabagel100 5 ай бұрын

i really want a sleeper toolbox cover

@Woodie-xq1ew 5 ай бұрын

And the Florida rainstorms. All it takes is a pinched o-ring and there is water in that tank

@squeak350 5 ай бұрын

“Pumping E, at the pump…” 😂 bro is so stoked 38:22

@alankowalski8781 5 ай бұрын

I enjoyed this build but mostly because I have really like the Vette build. I like the shop build stuff and the bus upgrades as well. I keep hoping that the next video is going to be the start of Grandmas car build.

@dank7376 4 ай бұрын

This is one of my favorite builds on yt! I love how you go above and beyond on your builds and how you show us every step of the way! I learn so much watching this Chanel

@ThatTurboZoh 5 ай бұрын

Love that Taylor takes extra steps to make things work as well as possible while looking just as good. Love it!

@JohnMcMahon-yf5ks 5 ай бұрын

little fab tip. A little sheet of .040 bolted between one of the plates before tacking would have kept it from being too tight; saw it coming as I watched the vid LOL

@commonsenseisdeadin2024 5 ай бұрын

I put a headlamp onto my welding mask (I used a steamlight because I had it and it's slim) Makes welding under a car so much better! I also have a mirror I glued magnets to that I stick above exhaust to see the top seam. Just a couple ideas/tips to share!

@goochygoochoutdoors.1913 5 ай бұрын

Where’s Jose..

@richardt3744 5 ай бұрын

I was thinking the same thing......

@Dalton2v 5 ай бұрын

I think he said in one of the last videos that he was going to Puerto Rico for a trip ?

@goochygoochoutdoors.1913 5 ай бұрын

@Dalton2v thanks buddy,I was wondering if gone on vacation.

@supersportjames9452 5 ай бұрын

I came here to say the trans connectors require heat to be removed and installed because of a factory adhesive but it seems the team has taken care of it. Carry on! Can’t wait to get my channel up to par with yours. 🙌🏾

@jonathanjackson1962 5 ай бұрын

Love this build. Can't go wrong with Xs Power. 7 years on the one in my '02 Silverado.

@ryken03 5 ай бұрын

This is one of my favorite builds on the internet now.

@gwbuilder5779 5 ай бұрын

Taylor, I always appreciate the extra attention to detail.👌 So many future headaches can be avoided or at least reduced by taking those extra few minutes.🤙

@GMCJay_lly 5 ай бұрын

❤ the GMT800 content. Keep em comin! Commenting for support!!!

@misterd3979 5 ай бұрын

Miss your helper ---

@slowMk4 5 ай бұрын

so hyped for this build!

@J.Steele7 5 ай бұрын

Really just tuned in. Heard of you before. You seem like a genuinely nice guy. And I’m happy for you bro that truck is on 75% of the countries to do list. I totaled my step side before a turbo could go on but it’s dope to see as it gives really good ideas on how to go about routing stuff. I’m an electrician by trade and automotive wiring while simple at its core is intimidating but you’ve got a masterful understanding it seems.

@ryanlee6881 5 ай бұрын

just wanted to say keep doing what you’re doing taylor. i’m currently trying to ls swap a 77 c10 im about to order a 408 stroker kit. i just wanted to say the videos of the truck make me want to get mine going!

@Grimme_st 3 ай бұрын

i wish i was your neighbor just being able to watch you fab stuff up and learn would be a dream

@clnfreakone8486 5 ай бұрын

Living in the north east I’m always jealous of the lack of rust crap falling in your face when working on these trucks lmao 🤣

@jdias51 5 ай бұрын

I currently have an avalanche in my home shop with a destoryed frame, lol Southcoast Mass rust for days

@clnfreakone8486 5 ай бұрын

@@jdias51 been there with 90 2500 Chevy … ye lucky my 95 Dakota was garage kept since new I got it from 2nd owner… the factory frame coating was gone I blew the whole truck apart and painted the frame … its oldest vehicle I own with lowest mileage 104k

@jdias51 5 ай бұрын

@@clnfreakone8486 niiiiice, this one power everything 103k learher sun roof super nice inside

@quebolahoe 5 ай бұрын

I love the truck content! Awesome street build!

@traderryan713 5 ай бұрын

Badass. Nice work, per usual.

@agentcrm 5 ай бұрын

Well, we know what you're doing in the next video. 😂 Time to sort those transmission plugs. As others have said, I would have added some gussets to that trans cross member. They're heavy frames at the factory for a reason.

@chrisbmx68 5 ай бұрын

So glad yo see you enjoying the drill press after not having one for all this time!

@WHITTLE74 5 ай бұрын

Can’t wait to see the drag and drive videos of this

@biggestthreattoyourexistence 5 ай бұрын

I enjoy your wide range of projects.

@jordansrc8483 5 ай бұрын

Take a heat gun and warm up the connector sockets then push them together. They have a gel type electrical lube that is like a glue when cold.

@1slow.grandsport628 5 ай бұрын

Definitely my favorite build on your channel

@sn95_mustang_garage 5 ай бұрын

I love fab videos! Glad you now have E85 close, I’m the guy that travels for it. Florida Turnpike Plaza I’ve been testing E85 for a year there and over 78% Ethanol every time. It’s the most consistent E85 Station I’ve found in Florida.

@joshg8458 5 ай бұрын

You could always put a go pro under the truck looking at the new trans mount, and do a street hit, just for the added proof it’s solid!

@Phil60084 5 ай бұрын

Definitely! See if that plate without gussets deflects

@JeffSlover 5 ай бұрын

Glad for the Sunday after 5 TR upload! The build is looking good, can't wait to see how well it can put down the power! I'm sure you noticed it in the edit, but the RT headlight was out, probably a wire or ground since you put those in pretty recently.

@brentspence3379 5 ай бұрын

tech tip. Make a backup to your tune file and name it test. set pump 2 to activate at 50% tps so you can test it engine off in the driveway. just to validate your wiring/pump. you can do this for fans/mac valve/pumps/whatever.

@billmadison2032 4 ай бұрын

I really enjoy watching your videos because you remind me of my 25 year old son. Can we please have some more Sandi content now the shop is done

@1967Twotone 4 ай бұрын

This running gag is great! You will do anything to avoid being seen running an actual drill press!

@bubah5723 5 ай бұрын

Cool build, I guess I like it because I have a twin turbo Silverado that same color and all, keep on keeping on,

@lunchbox517 5 ай бұрын

I love your channel mainly because you actually build you're stuff I hate the videos of look I had this cool car built give me credit 😂 just saying built not bought earns all the respect.

@jasonlouis5498 5 ай бұрын

Dude that green fuel pump power wire in the tap has caused more people problems - I rewired it and just left that one out. It’s cool most of the race trac stations have e85. Once you get on that corn there’s no going back lol 🌽

@Lukeod 5 ай бұрын

Great stuff. Bit of constructive feedback. If it were me I would box in or brace the flat bar piece of your mount you made. Wouldn't want that flexing.

@kavancooney214 5 ай бұрын

So glad you ended up with a jzx90 in the End... the first one looked perfect for export but the one you ended up with looked like a mint daily

@SourBogBubble 5 ай бұрын

thanks for the efforts!

@cheslacustoms5643 5 ай бұрын

Those plugs have like a factory glue in them on the trans side that make it a pain. Being cautious with a heat gun for removal makes a big difference

@Mattvardaman 5 ай бұрын

I am running a stock ecu and running a flex os with that same sensor. It’s great to have the tune automatically adjusted for ethanol content. I’ve had the turbo for about 20,000 miles. Working on the 4l80E swap now. Finally broke the 4l60e after 272,000 miles.

@dirtybikescleancars7601 5 ай бұрын

they recently built a sheetz with E, 2 minutes from my house and it was the best thing that ever happened, I've actually been very lucky as there is 4 stations all within 20 minutes that have E and I actually live in the middle of no where xD

@NoLyinEvry1sDyin 5 ай бұрын

So glad you finally got a vice on your makeshift drill press

@kzarnold3678 5 ай бұрын

🤔 nicely done 👍 quick, easy and clean

@BmoreFox 5 ай бұрын

Loving the LS truck content

@VWJawbreaker 5 ай бұрын

Well done!

@nocoasthero1204 5 ай бұрын

I gotta say it. From a structural standpoint point the mount could drop down. You gave the trans a lot of leverage on that small tubing.

@JohnRoberts71 5 ай бұрын

Great content thanks for sharing

@mcneilb 5 ай бұрын

kills me to see you make that out of square stock!! haha cross members should be tubing!! (unspoken rule of chassis building?) lol

@mjc8248 5 ай бұрын

I know the pain of that low crossmember. Thirty years ago I had one on 20's static dropped on the ground. I got high centered on the trans crossmember twice pulling out of a drive thru onto the street. Both times it had to be drug out onto the street. I had a custom crossmember built and then it just kinda slid over stuff instead of hanging up.

@hydrocarbon8272 5 ай бұрын

That tightness of the x-member is why trans x-members rarely have bolts that are perpindicular to the frame rails. They always have the bolts up/down or front/back. Live & learn.

@CraaaigV302 5 ай бұрын

Dude the truck looks so dam good i had to snap a screenshot of the outside shot wen u pulled up to the gas pump it just looks so sick you are killing it as always you should do a before and after before wen and it was on stock wheels not lowered and now after

@erichall9438 5 ай бұрын

Gotta have a jack to fuel up, lol! Exciting progress on the turbo “street” truck

@hydrocarbon8272 5 ай бұрын

Last post I swear: the 2 transmission plugs are hot glued from the factory, so they need to be replaced or heated to fully seat. Also looks like your alternator isn't charging over 4500. Might need a better regulator and/or an oversized pulley. If I'm reading your cluster right, you also don't have the fuel regulator set for boost reference.

@charlieheath4345 4 ай бұрын

Love the truck content

@coleklein9754 5 ай бұрын

I say you should build your own little aluminium tool box to cover everything you put in the back. It’ll also give you an excuse to get a spool gun. Just saying

@CountyCorral 5 ай бұрын

I like the mount I was curious how you were going to do it. Only thing I’d add is more gussets to where it mounts to the frame rails and where it mounts to the transmission. But thats hot rodding! Love the vids!

@biomacx 5 ай бұрын

Use a heat gun on the trans plugs to get them to sit in some more

@hydrocarbon8272 5 ай бұрын

About the ethanol percentage: it has nearly the same effective octane (for port fuel + turbo) at 30% as it does at 80%. 40% will still make more power than C16. So don't pull timing out linearly, just slightly down to 30% and then drastically down to 0%. Fuel obviously is a linear change.

@frankensteincreations4740 5 ай бұрын

I like what you do, your attention to detail, and I do thing’s similarly to you… lol. I actually just ordered a surge tank similar to the one you put in this truck last video… Putting efi on my roots blower, and making my own efi injection plate cause all the ones on the market suck and make no sense… Just subscribed to your channel, I like your stuff and style… 👍

@coastalyeti3762 5 ай бұрын

Makes me miss my ‘02. Cool build, she’s gonna be sporty. Sounds good too, the open header /stupid loud exhaust scene is bunk

@michaeldyer6304 5 ай бұрын

Love that truck 👍

@Emurato 5 ай бұрын

As soon as i see this truck i get excited!😂

@Tech_Master006 5 ай бұрын

the wires to the trans were glued in from the factory, if its been apart or removed when you got it, its because they had to get heated to remove.

@benrozema8007 5 ай бұрын

Hey Taylor you should get yourself a sand blast cabnet for fab jobs really helps to get your steel clean foe a nice weld and painting surface

@heywoodjiblome2745 5 ай бұрын

the neutral safety switch plugs have glue on them from factory, easiest way to get them off or back installed is to heat it up with a heat gun to loosen up the glue and push/pull the plug during, otherwise youll never get them to properly seat in and they will constantly push them selves back out

@knottypine7935 5 ай бұрын

This truck is going to be so much fun when everything is done! ♥️🇺🇲

@drakechandler2630 5 ай бұрын

would personally like to see another brace from where the trans mounts to the main bar. seems like a lot of unnecessary stress on the weld on the top plate that mounts to the trans. adding another triangle would help with strength. but other than that no complaints great job!

@drewisjesus1 5 ай бұрын

20 seconds before the weather check I thought to myself we need more " its a beautiful day in Florida " clips

@WhiteManXRP 5 ай бұрын

please keep doing great work, i love that truck, excellent year. Awesome dont butcher it, keep it nice, personally id raise it a bit higher, but shes badass

@Flexicokerboy 5 ай бұрын

Next time, add some washers in between the mating faces of the plates, at least one one side, so you have some clearance to get it in and out.

@robertsummers753 5 ай бұрын

ANOTHER GREAT JOB!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@alexandrustanciu1989 5 ай бұрын

Hey Tyler, idea : what do you think in stead of those holes in the bed you find a nice ventilation grill you can probably find something at Home Depot 😊it might look a little nicer I love the truck keep doing what you doing 👍

@lancelaprarie6128 5 ай бұрын

Steel it man. Can weld through and covers nice. Buy some

@Mr_Chipp 5 ай бұрын

Always a good day when the ray of the taylor uploads

@Cody450sx 5 ай бұрын

My 95 k1500 350tbi does the same exact thing when not starting I thought it was starter.. but if I click it off and back on really fast it starts 🤷🏻‍♂️ glad I’m not the only one with this issue lol

@bobjones8853 5 ай бұрын

The plug you’re having problems with are glued in by the GM. Lots on mechanics just use a flame to heat them up to brake down the glue to get them unplugged. Most likely the truck had a trans replace/rebuild before you got it.

@spyrule 5 ай бұрын

The only thing I'd add to that mount is a trangle vertical place in the middle of that mount to the transmission itself. Under load, that will flex, and will eventually fatigue the bend in that plate, and snap it. Esp. from hard launching.

@josiahbuer6251 5 ай бұрын

Not sure if you’ve used it but the weld through paint is a good thing to have on hand. Not that rust is a major issue in florida but protects those few parts that u can’t get to once it’s on the vehicle

@JackTruitt 5 ай бұрын

rust is definitely an issue in Florida lol

@josiahbuer6251 4 ай бұрын

@@JackTruitt I’m in Michigan so most cars from florida I see have nothing compared to ours😂

@peterhermansson8388 5 ай бұрын

Truck is sweet! Time to go to kevin and get a proper tune in it👌 and maby traction bar and suspension relocation.. Or just go down the rabbit hole and 4 link it😂🙈