Team Z mini tubs www.teamzmotorsports.net/Team_...
Пікірлер: 40
@TheRoadhammer3792 жыл бұрын
Saw one guy on another channel, he tack welded the very end of the flat and the curve, then worked it in to the Pittsburgh seam. Really enjoying the content, learning a lot as I am new to the foxbody. Spent years playing with 1 ton Ford trucks for mud bogs, sled pulls and off road, now it's time to relive my 90s youth and build a fox
@crusadergarage2982 жыл бұрын
Good luck with the project. And thanks for watching.
@momentummotorsports61378 ай бұрын
Great channel and good work congrats this vid was super helpful so thx
@crusadergarage2984 жыл бұрын
I just checked and Team Z does not offer the mini tub kit already put together. My Bad. Still a great product from a great company.
@alialdoseri73634 жыл бұрын
I did full tub and it's nasty job for the first time and I had to do it twice from mini to full tub.
@crusadergarage2984 жыл бұрын
Nice. I have never done a full tub. Just mini tub, twice. On a 69 Camaro I built and this mustang. Thanks for watching.
@bobbyciman88924 жыл бұрын
Awesome 🤘🤘
@crusadergarage2984 жыл бұрын
Thanks. More to come with this project
@jaylawler82894 жыл бұрын
A ratchet strap helps roll the tub around and hold it while you beat the lip over.
@crusadergarage2984 жыл бұрын
Good idea, thanks for the tip and thanks for watching.
@ManuelRamirez-tj2ze4 жыл бұрын
Nice👍
@ProCharged377LX2 жыл бұрын
Dam that eye! Somebody said SHUT UP & you thought they said STAND UP!?
@crusadergarage2982 жыл бұрын
Well learned that the car always wins.
@echo717022 жыл бұрын
Being a sheet metal worker it pains me to see you hammer down the edges ever few inches😂 good job with those pitts for not being a tinner!
@crusadergarage2982 жыл бұрын
Thanks for watching.
@VRMN8R2 жыл бұрын
Im impressed with your build/work. You dont add a bunch of BS talking and moving the camera around and you get to the point of your video. How far along are you with the Fox? New subscriber.
@crusadergarage2982 жыл бұрын
It’s pretty much done. I’ve been 5.40’s at 127mph on 16lbs in the 1/8 already. Still getting everything dialed in. But it’s going in the right direction for sure. Thanks for watching and subscribing
@VRMN8R2 жыл бұрын
Thats great. Definitely knocking out some good times then. Im going to do a 02 Mustang that Im picking up tomorrow. Have an S10 that Ive been playing with for about 5 years and I guess its time for something different. Thanks for the videos
@crusadergarage2982 жыл бұрын
Coyote swap is definitely the way to go. M probably making close to 1,000 hp with a stock Gen2 motor that I paid $2,100 for. Can’t beat that. Good luck with your 02 project
@VRMN8R2 жыл бұрын
Im not a Ford "purist" :D Im going with the other dummies out there with an LS. Its whats in the S10 right now so, thats what Ill be doing. Been a Chevy guy all my life but have a little spot for some of the Mustangs. Ill be building a Forvy or a Chord???
@crusadergarage2982 жыл бұрын
As long as it’s fast it doesn’t matter. 😎👍👍
@colonybud4 жыл бұрын
How to fab up the suspension though
@crusadergarage2984 жыл бұрын
Just did a video of narrowing the 8.8/welding the new suspension on the housing 👍
@TheBigShabowski Жыл бұрын
Did the tubs sit on the floor in the rear? or did they butt up against the floor.
@crusadergarage298 Жыл бұрын
Depends on how you cut the floor. You can do either with them.
@ManuelRamirez-tj2ze4 жыл бұрын
Will you think 15x12 and 7.5bs will fit with mini tube?
@crusadergarage2984 жыл бұрын
I’m narrowing my 8.8 2 5/8” each side. So for the rim to sit where mine is. You would have to narrow yours 1 5/8” each side. Not sure if it would fit without narrowing the rear, a 12” rim that is. Hope that helps. Thanks for watching.
@ManuelRamirez-tj2ze4 жыл бұрын
thank you, I appreciate it good info🤘
@echo717023 жыл бұрын
Rule #1 to sheet metal work, hit the material with the side (flat part) of your hammer😂
@crusadergarage2983 жыл бұрын
Lol. Thanks for watching.
@bryanbrunk11863 жыл бұрын
Shock mounts??
@crusadergarage2983 жыл бұрын
m.kzfaq.info/get/bejne/d56Fod12rbzdpqc.html
@johndosh24694 жыл бұрын
How much clearance is gained from this?
@crusadergarage2984 жыл бұрын
I would say about 3 more inches
@johndosh24694 жыл бұрын
@@crusadergarage298 thanks
@crusadergarage2984 жыл бұрын
Anytime. Thanks for watching.
@johndosh24694 жыл бұрын
@@crusadergarage298 ok, so what size tire can u run now comfortably? I'm gunna do this to mine soon
@crusadergarage2984 жыл бұрын
The tire that is on it now is a 325/50/15 drag radial.