Teardown of Anker 100W USB-C Charger, 736 Charger (Nano II 100W)

Рет қаралды 17,849

Күн бұрын

Correction: 0:48 foldable prongs
You can buy it on Amazon: amzn.to/38V2j4Z
If you wanna buy the tester of POWER-Z, you can visit our Amazon store:
www.amazon.com/s?me=A31UM8SRX...
Introduction
---------------------------------------------------------------
ChargerLAB has published several teardown videos of Anker chargers in the past.
And today, we got another brand new Anker 100W GaN charger, which is equipped with two USB-C ports and a USB-A port.
Let’s try to take it apart and check what’s inside.
Bill of materials (BOM)
------------------------------------------
Time-delay Fuse: Better Electronics (3.15A 250V)
Safety X2 Capacitor: DGCX (0.47μF)
Bridge Rectifier: Pingwei D8KBR10
Film Capacitor: DGCX (0.47μF)
PFC Controller: ON Semiconductor NCP1622BEC
GaN IC: Navitas NV6136A
Electrolytic Capacitor: AiSHi (420V120μF)
Primary Controller: Southchip SC3022D
Optocoupler: EL1018
SMD Y Capacitor: Anshan KeiFat
Synchronous Rectifier: Vergiga VSP007N12MS-G
Solid Capacitor: Yongming (680μF 25V, 470μF 25V)
Buck Controller & Protocol Chip: Ismartware SW3516H
MOSFET (USB-C): AOS AONR21357 (30V, 6.3mΩ)
Output VBUS MOSFET: AOS AON7544 (30V, 5mΩ)
MCU: Chipsea CSU38F20
Chapter
----------------------------------
0:00 Intro
1:02 Test
1:57 Teardown
3:02 Analysis
7:24 Summary
For more details. You can visit our website:
www.chargerlab.com
SOCIALS:
Instagram： / chargerlabs
Facebook： / chargerlab
Twitter： / chargerlab
For Business Inquiries: info@chargerlab.com

Пікірлер: 29

@fishea 2 жыл бұрын

As a power adapter nerd, let me just say: I LOVE YOUR WORK!!

@amaankhan3762 2 жыл бұрын

We have come so far. From big bulky chargers to these which have no space left inside chargers. Great Video

@drleo6409 Жыл бұрын

This is a major in-depth review. More than I needed, but I’m sure there’s others that really understand all of this

@liamsenn77 2 жыл бұрын

thank you for your video, great work

@PSM-IPADZ_OX 2 жыл бұрын

Hi ChargerLab and another useful informative teardown video. GaN charger of high output is plenty and getting common nowadays but prices still remains high. Manufacturers and designers are cramping in a lot of components into a smaller case to save costs. Fortunately, as you mentioned, they have designed protection circuits into the charge too so safety is quite good. Simultaneously charging 3 devices may not be a good idea as it may be warm and the plastic case is not good for thermal dissipation. Overall it’s a good design with good quality parts and highly transistors driven. On the other hand, not many devices in the market can make full use of 100 Watts fast charging.

@ginbot86 2 жыл бұрын

One thing that bothers me about Anker PD adapters is that they seem to never support 12V PDOs. It might not be a mandatory voltage in the PD specifications, but it's still annoying when I have a bunch of devices/PD triggers that need 12V and can't use them.

@tenka__ 2 жыл бұрын

what devices? genuinely curious

@ginbot86 2 жыл бұрын

@@tenka__ Mostly devices that I can power with a PD to 5.5x2.1mm barrel plug adapter, so things like external hard drives, battery chargers, etc.

@smko 2 жыл бұрын

@@tenka__ Dji mini 3 two-way battery hub - 3A@12V

@Shemanto_Shreaan_Islam 2 жыл бұрын

thanks again

@JRD876 Жыл бұрын

Great Video fam

@judal58 2 жыл бұрын

please a tear down of the Voltme Revo 100, GaN III Technology & V-Dynamic Tech

@rhys6063 2 жыл бұрын

any news on when the release date is for the UK? Really looking forward to getting my hands on this charger.

@alexh.8575 2 жыл бұрын

Awesome teardown! Please review the Razer 130w and Hyperdrive 100w charger. Hyperdrive seems to be the first company to release high wattage gan chargers a few years back. I wonder how they stack up against the competition. Would love to know your thoughts.