Tech Talk with Tony - Ball Joint Eliminators, Hubs, Axles and More!

  Рет қаралды 12,462

GenRight Off Road

GenRight Off Road

3 жыл бұрын

Tony has installed the Ball Joint Eliminators, and is ready to go put them through their paces at King of the Hammers. Plus Tony talks Axle Shafts, upgrades, splines, carriers, and what this all means for your axle build.
Tuesday and Thursday are Tech Talks with Tony LIVE on GenRight Off Road's page. Join the LIVE and ask your Jeep Build questions, or watch the replay.
#genrightoffroad #Jeepwrangler #4x4 #jeepbuild

Пікірлер: 13
@phillipcarnes988
@phillipcarnes988 Жыл бұрын
I have a 2020 JL Wrangler unlimited non Rubicon. I am running 37's as right now I was going to upgrade to a stronger ball joints but been looking at the delete . This is my daily driver. Thoughts?
@joyoboyo1936
@joyoboyo1936 Жыл бұрын
Can the JK elite use a 3.5 inch diameter tube coilover too like the JL?
@SuppressedArmament
@SuppressedArmament 3 жыл бұрын
how about a tech talk on LS swap options? Stand alone vs full can bus integration, what you will lose and what you can keep as far as function.
@ernestomatthias8682
@ernestomatthias8682 3 жыл бұрын
A tip: watch series at flixzone. Me and my gf have been using them for watching a lot of movies recently.
@romanoscar4742
@romanoscar4742 3 жыл бұрын
@Ernesto Matthias definitely, I have been using Flixzone for months myself :D
@cohennixon4810
@cohennixon4810 3 жыл бұрын
@Ernesto Matthias Yup, been watching on flixzone for years myself =)
@hugoryland5888
@hugoryland5888 3 жыл бұрын
@Ernesto Matthias yup, I have been watching on flixzone for since december myself =)
@chaguito69
@chaguito69 Жыл бұрын
Big question here, where can I find locking hubs matching my 5x5 pattern wheels, I’ve been looking at all your videos and see everything on that pattern, does it require any conversion or the wheels hub opening needs to be bigger? By the way mines is a 2013 jku sahara trying to upgrade to a front dana44 soon
@andrewpleger488
@andrewpleger488 Жыл бұрын
Yukon has a set and RamMan makes one too
@HI-rb9bl
@HI-rb9bl 3 жыл бұрын
So over it!
@scothansen3779
@scothansen3779 2 жыл бұрын
Any updates on ball joint elimination ?
@GenRightOffRoad
@GenRightOffRoad 2 жыл бұрын
We have been flogging on the Terremoto all summer, even let our ambassador GenRight Cord drive it on the Rubicon, we hammered on it at Trail Hero, still no issues.
@scothansen3779
@scothansen3779 2 жыл бұрын
@@GenRightOffRoad awesome thank you
What Are Ball Joint Deletes And How Do You Install Them???
21:35
JK Gear and Gadgets
Рет қаралды 298 М.
Пранк пошел не по плану…🥲
00:59
Саша Квашеная
Рет қаралды 6 МЛН
Clowns abuse children#Short #Officer Rabbit #angel
00:51
兔子警官
Рет қаралды 79 МЛН
Sigma Kid Hair #funny #sigma #comedy
00:33
CRAZY GREAPA
Рет қаралды 37 МЛН
ROLL CENTER EXPLAINED by Jake Burkey- Tech Tuesday
16:40
Busted Knuckle Off Road
Рет қаралды 53 М.
THIS is what makes the Dana 60 so great!
17:41
Merricks Garage
Рет қаралды 63 М.
How Big of Tires Can You Run on a Dana 44? | Harry Situations
16:56
Driving Line
Рет қаралды 271 М.
Building a 4-Link Suspension to Conquer the Trails - Carcass S2, E6
21:49
❌ Ball Joint DELETE ❌ | Rock Solid Rig | Install Video
17:59
Rock Solid Rig
Рет қаралды 149 М.
Don't Pay for Ball Joints Again, Jeep Adjustable Ball Joints
15:18
Dana 60 Gear And Locker Install
1:13:59
JK Gear and Gadgets
Рет қаралды 194 М.
How Much Does an LS Engine Build Cost?
1:03:22
MotoIQ
Рет қаралды 179 М.
Достойный поступок водителя❤️
0:39
Taкса
Рет қаралды 3,7 МЛН
ЗАКЛИНИЛО ГАЗ 🤯
0:16
Top YouTubs
Рет қаралды 451 М.
Дальше без меня!
0:25
SMASHCAR
Рет қаралды 509 М.