You folks at Shadow Systems have moved ahead of the pack, so to speak, in my eyes. I used to be an HK/Glock guy but ever since I bought my DR920P, I have been obsessed with growing my SS Collections and honestly can't wait for the things to come. Not only are y'all representing Texas but the whole DFW, which is my birth place, and it makes me proud. Im an up and coming KZfaqr who is passionate about firearms and will definitely be testing and evaluating as much Shadow System's Gear as I possibly can.

Thanks Trevor. I purchased 2 DR920’s. One for me and 1 for my youngest son. (25 years old ex army). He took both pistols to the range Saturday. Called me while he was there saying “Dad, these pistols are trash”. They won’t cycle more than 2 rounds without malfunctioning. I told him to calm down. I asked what ammo did you bring? He said the cheap ball ammo. I responded with: “ I told you that these weapons are tight and you’ll need to lube ‘em 1st and shoot the hot rounds out of them. Shoot about 4 mags. He just couldn’t understand why he’d need to shoot his “premium ammo” ($$) to break them in. Well, number 1 I paid for both guns and I paid for the ammo and you should have learned something from being in the military. Train with the SAME AMMO you’re carrying everyday. Yes it’s a LITTLE MORE EXPENSIVE but your life is priceless. I get his logic to some degree and I understand that some people can’t budget for that but you don’t buy a Porsche and put $40 tires on it to break in the motor. I’m 60 years old and I’ve learned this the hard way. If you train with weaker ammo you’re building muscle memory whether you realize it or not. When faced with a crisis situation and you engage with your “hot stuff” things are going to feel different and potentially cause you to glitch. THAT COULD POTENTIALLY COST YOU YOUR LIFE. This Gun is definitely NOT FOR EVERYONE!!!!!!! I believe this has become a marketing nightmare. It’s impossible to produce a high end product with tighter tolerances then explain to people you’re going to need to break this Gun in by shooting 200 to 300 rounds. If you say it up front you loose customers and if you don’t say it you get a customer service tsunami. MY THOUGHTS: Hang tough with your mission statement. Things will eventually come around when enough of us educate our friends and family about this weapon. When you reach the 500+ rounds stage this weapon is SWEET. Positive side; this forces people to get out and shoot their damn guns and become proficient. The way things are going in our country and our border crisis WE NEED TO BE FAMILIAR WITH OUR WEAPONS. Gun purchases are on the rise and we need gun competency to rise with it. My guess is we’re going to need it. 911 will be flooded and each one of us will be our own 1st responder. Enough ranting. Thanks so much for taking the time to come on here and lay out the facts. The climb to the top is never easy but we need more gun manufacturers engaged with our people. You’re doing a great job and service for all of us. I wish you all the best and pray that shadow systems reaches its full potential of success.

Awesome video packed with excellent information!! Thank you!!!

Thanks for the weekly videos👍🇺🇸

Very helpful. Thanks for technical Tuesday

My M920E w/ SS comp is still my favorite. Soft shooting carry, always running 124g,,,, never had an issue. Excellent weapon !!!!!

Great video. Your video's are much appreciated.

I love my MR920, thanks for the tutorial!

I appreciate very much the advice about keeping thistles a little bit wet. From my very first gun I was advised to keep them a bit dry, and I swear I could hear them squeaking sometimes.

Thank you for this video. Very helpful for both my MR920 and Glock

Just bought mine from the GlockStore/Nashville 1/9/23. A pre cleaning and a 100 round post cleaning of the CR920 . All good. Committed to my daily carry. Been using Lucas for years. My box did not have any in it.

I’m honestly looking into this brand of handgun’s for my 2nd purchase and I love how much info there is.

Thanks for this. I missed a couple of spots and will make sure to get them in the future. Like the Lucas oil bottle.

Great video. Thank you

Just in time for all of the new owners. I just picked up a CR920 Combat Optics ready. Excellent pistol.

Thank you guys !!!!!!

Nice I have been using Lucas since I seen them on the market

Very helpful video. Thank u!!

I pretty much do the same thing, except I use grease on the connector

Thank you!

Had mine 2yrs now, never had an issue and I lube with the same oil and locations

Good job Boss.

Started putting TW25 on all my guns several years ago it works great. If you know, you know.

This video is helpful when I clean my glock 43x I like using breakfree clp

Thank you.

Thanks for info. Ran your video while cleaning my DR and MR lol

Just bought a MR920 Damascus for Black Friday and took it to the range the day after. I have a Gen 5 Glock 19 and tries to used the 4 Glock OEM 15 round mags I have and each Glock mag will not chamber a round. The Pmags that came with the MR920 work just fine but it shocked me that none of my 4 Glock OEM mags wouldn’t change a round and will have the round stuck. I have one Glock OEM 15 round mag with a 5 round extension to make 20 round work flawlessly. Idk if the MR920 is very picky with Glock mags or not but I assumed they would’ve chambered without an issue

Cool. Thanks!

Wrist check?! What type of watch are you wearing like the look? Thanks love the tec Tuesday videos.

Where can I get the shadow systems gun mat?

Excellent 😊👍🏼👍🏼

If you use heavy lube on a Glock it will migrate into the firing pin channel. Take the cover plate off and wipe that channel out pretty frequently. I have seen a LOT of gunk and lube in this channel on heavily lubed Glocks. Also, gun oil disappears/evaporates in as little as 20-30 days. Gun grease, on the other hand, will stay on a gun for at least a year. My police dept switched to gun grease, because it kept the guns perfectly lubricated all year long until the next qualification. We found guys that lubed with oil has COMPLETLY dry guns most of the year because they didn't lubricate every month, as needed, when you use a gun oil. Gun greases is much more forgiving and last a lot longer. I think its better to use grease in most cases, unless you live in arctic conditions.

Any idea where I could get a SS cleaning mat? Don't see anything on the website. Just bought a CR920 War Poet edition and absolutely love it!

Nice how to video. Question for you. I have around 3,000 rounds on my pistol. When should or at all, I should do a total breakdown of my pistol to clean everything?

Any advice or comments on new cr920 trigger grittiness? I know a lot of people are experiencing this.

what holster do you guys recommend for a Shadow Systems MR920 Elite with Holosun HS507C-X2 Optic???

They absolutely run better wet, every gun!

Just bought cr920p brand new. Do I need to lube it immediately? Obviously I’ll take it down when I get it and look but just curious.

Would you recommend cleaning off the loctite compound and re-applying a new coat or should I just leave whatever is still there? I did a cleaning and still saw a healthy amount left over and didn't know if I should replace it or not. Would you also recommend using the loctite compound as a long term lubricant for the connector?

Is the Loctite 466863 C5A Paste in the 25mL stick the exact same thing as the 8008 C5A? On Amazon the 8008 is $40 for a whole can and the stick is only $15 but probably enough for my needs.

I have an XR920 I carry at work. Can you make a video on how to detail strip the gun for a deep cleaning? I have done that for years on my Glock and would like to do the same on my XR920.

Can you do a video on disassembly and cleaning the magazines?

Where can we get a schematic gun mat?

When I first get my cr920 is it recommended to lube it before I start breaking it in at the range?

Ima be real with ya Trevor. 8k through my mr920 and maybe cleaned it once when i first got it. Ive had possibly 3 malfunctions due to cheap ammo primers.

Could I change my guide rod to a tungsten on my cr920?

30 years experience. After 3 or 4 rounds any excess oils will be blown or burned off. I like it wet also!

@Nightwood Guns showed his CR920 recoil guide rod did not set against the barrel block when assemble in the slide. No way is this correct, right?

Never a single malfunction in my xr920 elite... I used the blue Lucas at first.. Now using the red lucas

That's what she said!

How often should someone clean their gun to keep a somewhat good quality gun?

Nice

I am on my 2nd MR920P , they have a defective trigger issue that could result on a major failure. I have over 3 Shadow Systems, not a single problem with them but the MR920P is defective and Shadow systems doesn't reply back with a solution.

Do you need to put some lube inside the barrel?

Seems like mine came lubricated from factory. Should I do more?

Wish someone went through how to open the gun to clean. Everyone does it so quick.

What solvent is recommended ? I used Boretech carbon remover but i'm convinced it started attacking the TiN coating of the barrel.

Amazing video. Are you suppose to oil inside the barrel?

Assembled in Texas with part foreign and domestic.

Have about 300rds through my XR920 Elite with a bronze threaded barrel - is it normal for the bronze on the barrel to have already worn to a more silver in multiple contact areas?

The wetter, the better. -Trevor (probably)

How about gun grease instead of oil?

I just got my first Shadow Systems pistol today, and there wasn’t any oil included in the bag..

Link for the pistol mat plzzz

What watch it that?

sexiest pistol i own

👍🏻👍🏻🇺🇸🇺🇸☕️☕️💯🛎

I throw mine in a bowl of Dawn dish soap and scrub it. Dry it and add a few drops of lube and she's ready to go. Simple. Don't yell at me. lol.

Lucas gun cleaner/contact cleaner Works well,sqeaky clean then lube With oil CLP doesnt do anything well

Everything works better when lubed.

@shadowsystemscorp copper slip!

Lol really? 10w oil? Never thought about. Maybe? Makes some sense. Well i use and like clenzoil, after watch a oil test done by project farm, it’s my favorite oil

Slip2000

Oof. Turns out I over oiled the crap out of mine. Well, looks like I need to buy a new mr920 ;)

Bro if that's Lucas it smells like corpse in a bottle

I have one of your pistols on order,however, I may cancel. I have seen and read far too many issues with these pistols. I need a true self defense pistol that my life can depend on and will run without having to baby it like a 1911 or an AR. This is exactly why people purchase Glock’s and AK47’s they just run.

does shadow has another spokesperson who doesnt look like a tool

I'm commenting on this video because it's been over a week after contacting support without any follow up. I've owned my MR920C for about a year and it still jams on the feed ram shooting 147g 9mm. The issue was never fixed and I come to find out other MR920 owners experienced the same issue Your warranty indicates a 5 year coverage and reads: "Shadow Systems warrants to the original purchaser that the firearm was made free of defects in material, function, and workmanship. Shadow Systems will address any such defect for the period that the original purchaser owns the firearm. In cases where a product cannot be repaired, Shadow Systems reserves the right to replace the product with a current production product of like kind or value. This Limited Lifetime Warranty does not apply to wear items including: Firing Pins, Extractors, Magazine Catch and springs. This Limited Lifetime Warranty also does not cover loss, theft, deliberate damage, or cosmetic damage that does not affect function." I would definitely say my situation qualities as a defect in function. I found a comment from another customer experiencing the same jamming issue as me using 147g. I asked what was done about it and he replied, "mine had trouble with CCI blazer. They sent me a replacement barrel with the most smooth polished feed ramp I’ve ever seen. No problems at all since." I'm wondering why this wasn't done with mine in the first place. Another customer said he just sold his because he simply can't trust the gun. On May 13th, 2020 I emailed support@shadowsystemscorp.com asking what Shadow Systems intends to do about my gun jamming. Kayli Newman replied asking for pictures of my feed ramp, which I sent and I have not heard back from her or anyone (not even voice leaving a voicemail) since May 13th! is this the kind of customer service Shadow Systems represents? I paid $800 for my MR920C and it SHOULD NOT jam on 147g 9mm ammo. On your website you indicate: "Have questions? Lot’s of people do! We’re here to answer those questions. support@shadowsystemscorp.com" I also tried calling you and left a message, no one has called me back, you also have on your website: "Give Us a Call, We’re old-fashioned, we still believe in phone numbers with people on the other end. Go ahead, give it a try. (469) 458-6808" Is Shadow Systems going to contact me or just blow me off? Because if this is how your company operates you seriously need to reevaluate your goals for success.

He said wd40 works fine 😅🤐🫠