Technical Webinar - Understanding Uninterruptible Power Supply Systems Designs

Рет қаралды 29,055

Күн бұрын

Understanding the different designs of Uninterruptible Power Supply (UPS) sytems and the advantages and disadvantages of each type and how it operates.
Please email any questions to sci.marketing@ametek.com or contact us on our Website (linked below).
AMETEK Solidstate Controls: www.solidstatecontrolsinc.com
Facebook: / ameteksolidstatecontrols
Instagram: / ameteksci
LinkedIn: / solidstate-controls-inc
Twitter: / ameteksci

Пікірлер: 18

@hoxuanloca7707 3 жыл бұрын

Great video, thank you so much, sir!

@AMMOHL Жыл бұрын

awesome training

@azeddineabdoune6394 Жыл бұрын

good work!

@weir-doe3205 8 ай бұрын

Hi, for CB1 & 52C of a commercial UPS(9:37) , does it detect DC current or voltage propagating into the AC mains?

@andresariza3451 2 жыл бұрын

Dear AMETEK, Do you have any kind of UPS suitable for connect variable frecuency inverters?

@JBafable Жыл бұрын

If thier is a problem to an any outlet from UPS ,how can I reset the UPS ?

@trvn0891 2 жыл бұрын

When normal power is lost, but normal power is fed thru ATS and you get normal power back within a couple of cycles; what are the sequence of the UPS? my understanding is to batterie power and back to normal after normal is restore to UPS

@ameteksolidstatecontrols4657 2 жыл бұрын

Please email your questions to sci.marketing@ametek.com and we will connect you with someone to answer your questions.

@karbonphiber 2 жыл бұрын

Yea that’s correct.

@craigwilliams6158 2 жыл бұрын

Ricardo. When you have an ATS feeding the normal power (rectifier/charger) to the UPS, when normal power is lost a standby generator will start. This generator usually takes around 30 seconds to 1 minute to start and get up to speed. After it is up to speed, the ATS will transfer power supplied to the rectifier/charger to the generator. During the 30 seconds to 1minute, there will be no power into the rectifier/charger. Therefore the battery will supply the inverter while the generator is starting. Once the generator is on and the ATS transfers, power will be returned to the charger/rectifier section of the UPS and the batteries will start to charge again. It should be noted that the ATS does not have anything to do with the load circuits. Only the input power to the rectifier charger section of the UPS.

@markswamy5364 11 ай бұрын

Where are your products manufactured?

@rfans4 3 жыл бұрын

07:26 what function of external transformer in UPS? for motor load did we also need transformer?

@ameteksolidstatecontrols4657 2 жыл бұрын

Thank you for watching the video and commenting! Please email your questions to sci.marketing@ametek.com and we will connect you with someone to answer your questions.

@karbonphiber 2 жыл бұрын

Function of the external transformer is to step up/down voltage, or derive a neutral source, or create a solid ground source for the ups. Not ideal to place motor load on ups as it will overload it during startup due to high in rush

@AMMOHL Жыл бұрын

Isolation of the inverter or electronic system in the inverter against inrush currents arising from industrial loads. Basically, it is for safety purposes of the UPS systems.