Рет қаралды 42
In this case the VCO oscillator will not sync with the PLL chip.
I have found a source for a 120 Mhz to 130 Mhz VCO on an SMT chip.
This in itself is a small MIRACLE.
So if an eBay scrapper WOULD scrap a Paragon I and sell off the PLL Minor Loop board
my problem would be solved - buy that Minor Loop board on eBay.
I would try this 120 to 130 Mhz VCO but I need to buy (5) of them at about $25 each
for about a $150 out of pocket expense with shipping and tax from
mouser.com
Here the specs on the SMT VCO:
www.mouser.com/datasheet/2/94...
Mistake buying these. Getting RMA from Mouser to return them.