Ten Tec Paragon I 2 solder Sucked all the connections under VCO and resoldered. VCO now stable.

  Рет қаралды 59

moviestudioland

moviestudioland

Ай бұрын

Lots of solder sucking off the traces and careful application of new solder.
Had very good lock.
Then I lowered the cage back onto the board as it was up about 1mm
and soldered on the bottom shield to the board.
This may have helped. But I caused a short in the VDO control line.

Пікірлер
Replacing Electrolytic Capacitors
10:09
dangoodell2
Рет қаралды 206 М.
RADDY MALAHIT DSP2 - All Mode 10kHz-2GHz SDR Receiver
46:53
Heartwarming Unity at School Event #shorts
00:19
Fabiosa Stories
Рет қаралды 23 МЛН
КАК ДУМАЕТЕ КТО ВЫЙГРАЕТ😂
00:29
МЯТНАЯ ФАНТА
Рет қаралды 10 МЛН
50 YouTubers Fight For $1,000,000
41:27
MrBeast
Рет қаралды 205 МЛН
How to Solder Surface Mount parts (it's easy!)
18:53
LeoMakes
Рет қаралды 466 М.
This AM radio still costs thousands of dollars-why?
16:51
Geerling Engineering
Рет қаралды 119 М.
RADIODDITY QT-40   CB    ( " MOD " 11 METERS " )   HOW TO
14:12
Ottronics64
Рет қаралды 548
NEVER install these programs on your PC... EVER!!!
19:26
JayzTwoCents
Рет қаралды 3 МЛН
The Coolest Radio You've Probably Never Heard Of
11:54
Tom the Dilettante
Рет қаралды 3,6 МЛН
Another cheap scope: $18, shipped! (FNIRSI DSO152)
51:30
Adrian's Digital Basement
Рет қаралды 282 М.
Iwatsu SS 5705 Osciloscope tear down and troubleshoot
40:20
12voltvids
Рет қаралды 24 М.
REAL OR FAKE?
0:10
dednahype
Рет қаралды 11 МЛН
Сделала Сюрприз Брату После 3 лет Разлуки ❤️
0:26
Глеб Рандалайнен
Рет қаралды 1,2 МЛН
The master set up a pillar among the people in seconds
0:17
Dice Master_1910
Рет қаралды 71 МЛН
🥹Он герой (shawn_cnhk on IG)
0:15
Бутылочка
Рет қаралды 5 МЛН