一本の糸とステンレス鋼線で構成するテンセグリティ構造の作り方を紹介します。This video introduces how to make a tensegrity structure composed of single string and stainless steel wire.#テンセグリティ #tensegrity
Fascinating. You are an inspiration. I've been making the standard triangle shaped ones out of mahogany, but the single string ones are intriguing. Thanks!
@yattemita44472 жыл бұрын
Thank you for your comment.
@normanacree1635 Жыл бұрын
I have made some using rectangular wood structures instead of the stiff wires. They look pretty cool. The nice aspect of the one above is that the string jumps out at you and attracts your attention more, making it somewhat more mysterious.
When I copied you model, I stretched the string as tight as I possibly could before gluing the wire. Was that not necessary? Yours didn't seem too tight. I also had to use 2 stabilizing wires attached to the base to get it stable. Thank you for the time taken to share.
@yattemita4447 Жыл бұрын
Thank you for visiting. I used a jig to stretch the thread, so it may not have looked tight. When removed from the jig, the thread is taut.
@ikuna1973 жыл бұрын
マジックで使うような見えない糸で、かつ背景の色を黒とかにすると針金が宙に浮いてる感じになりそう
@yattemita44473 жыл бұрын
コメントありがとうございます。そうですね、もっと不思議そうに見えますね。
@Jim_Austin3 жыл бұрын
Brilliant! I especially like your assembly jig. I'm going to try to duplicate the project if I can find some wire like that.
@yattemita44473 жыл бұрын
Thank you for your comment. Please try to make it. I'm clumsy, so I'm thinking of jigs so that I can make things well.
@Jim_Austin3 жыл бұрын
@@yattemita4447 - I got one made but I found it more difficult that I expected from your video. I think my wire was too stiff maybe. I found it hard to get it to stand vertically. You can see what I managed to do here: kzfaq.info/get/bejne/fraid8Kr1r3Qmmg.html
@yattemita44473 жыл бұрын
Jim Austin - It's very well done. Especially, I was surprised that the ones installed outdoors were big. It would have been difficult to make.
@Jim_Austin3 жыл бұрын
@@yattemita4447 - Actually, I find the larger ones are easier to do. Yours was the hardest one I've done so far. Thanks for your comment.
@yattemita44473 жыл бұрын
Thank you
@MuhammadDaudkhanTV1004 жыл бұрын
Excellent
@yattemita44474 жыл бұрын
Thank you for your comment.
@fabriziofabrizi55242 жыл бұрын
Bravo bravissimo 🙏 Fabrizio 🇮🇹
@yattemita44472 жыл бұрын
Thank you for your comment.
@kanpan39123 жыл бұрын
ご覧頂きありがとうございます。
@kanpan39123 жыл бұрын
コメントありがとうございます。
@purajynyarasptin981410 ай бұрын
LEDと組み合わせたら変わり種なクリスマスツリーとか作れそう。
@yattemita444710 ай бұрын
コメントありがとうございます
@normanacree16353 жыл бұрын
Do the rods need to be real stiff? If so, what gauge/diameter? I used metal guitar strings that were prettys tiff and it collapsed like a house of cards in the wind.
@yattemita44473 жыл бұрын
Uses stainless steel wire with a diameter of 1 mm.
@user-vh6rf8nc2x Жыл бұрын
これを作るのに木枠が一番必要なんですね。
@yattemita4447 Жыл бұрын
コメントありがとうございます。
@user-ro1kv6li4l3 жыл бұрын
頭では構造を理解出来てるはずなのにめちゃくちゃ気持ち悪いw
@yattemita44473 жыл бұрын
コメントありがとうございます。
@puu11033 жыл бұрын
💩
@user-kg9sv1jj9j3 жыл бұрын
なるほど、伸びようとしている力が支えているのか 一番下のは必要なのかな?
@yattemita44473 жыл бұрын
コメントありがとうございます。 やはり必要です。
@user-zd8ws4tg9t3 жыл бұрын
無いと浮かずに倒れてしまうんだと思います
@Mr-op2zp3 жыл бұрын
浮くけどくるりと倒れそうだ
@user-hv2tl8ge1g3 жыл бұрын
台から最初の針金までの張力が無いと立たない
@torimoti3 жыл бұрын
ビヨーンってなるのすごい
@yattemita44473 жыл бұрын
コメントありがとうございます。
@user-ki3wd3fm3d3 жыл бұрын
@@yattemita4447 コメントありがとうございます
@user-jz1jq8mj1n3 жыл бұрын
@@user-ki3wd3fm3d コメントありがとうございます
@red-1729-3 жыл бұрын
@@user-jz1jq8mj1n コメントありがとうございます
@taratara-1233 жыл бұрын
@@red-1729- コメントありがとうございます
@juanecheverria91984 жыл бұрын
You are an ingenious man. Peace upon you. Congratulations from Ecuador ( South América )