Terracotta Cluster Bead Necklace

Terracotta Cluster Bead Necklace | ONAM Special

Рет қаралды 19,721

3 жыл бұрын

Notes:
- Please Use only fired ghungroo beads. In between each of the thread beads, I have used 20 ghungroo beads, making it a total of 120.
- How to make ghungroo beads: • How to make stick bead...
- Adjust the tone of gold as per your choice. If you like it brighter then stick to bright gold. If you want them slightly antique, add very very little black to the gold.
- You can paint the beads in batches. Sometimes they tend to stick to each other so I would highly recommend painting in small batches.
- You can skip the thread beads if you want them all gold.
- Jump rings are optional, you can also directly connect the gear wire to the loop of the necklace dori.
- For cluster bead necklace, I prefer varnishing after the assembling has been done. Please do it carefully so that the varnish doesn't go on the thread beads.
Few links to the materials I use. Hope you find them useful.
• CLAY I USE: Laguna red low fire earthen ware clay without grog. (EM106 or EM334 wards)
• Firing (Bisque) at cone 06. (I don't own a kiln, so I take my pieces to a pottery studio close by and get it fired in an electric kiln there)
• Wire used: Nichrome wire gauge 28 for stick beads and ghungroo beads; gauge 26 for earrings and 24 for pendants.
Gauge 24 (India): amzn.to/2ygy4CJ
Gauge 24 (USA): amzn.to/39xZReS
Gauge 26 (India): amzn.to/33W8w9X
Gauge 26 (USA): amzn.to/3axi8dx
Gauge 28 (India):
Gauge 28 (USA): amzn.to/3azYaPu
• PAINTS: Acrylic paints (BRANDS: Master's touch, folk art , Liquitex and Anitas) - USA
• BRUSHES: 00,2,4,6 sizes round tip synthetic brushes. I also use liner brushes 20/0 to paint finer details ( bit.ly/2ZSL7Ez ) - USA
• VARNISH: amzn.to/3av95tV - USA
bit.ly/2ChWDlj - Matt (India)
bit.ly/3fLfjrd - Glossy (India)
• NEEDLE TOOL: In most pottery tool kits the needle tool is included as part of the kit. (Buying these individually will be expensive)
(India): amzn.to/2WTbKcC
(US): amzn.to/2UNOFpd
• Pottery tool kit with a fettling knife: amzn.to/39wO8NA
• Pottery tool kits that can be used for those starting of (India): amzn.to/3dCUhey
• Fettling knife (India): amzn.to/3dGnZ2j
• Ball tools (India): amzn.to/2WZlBxF
• Silicon tip finishing brushes (India): amzn.to/2JqlC5J
• Wooden modelling tools (India): amzn.to/2UuyZZ1
• Hole cutter (USA): amzn.to/2UHb2MQ
• Fettling knife(USA): amzn.to/33Wu8Tz
• Jhumka or quilling mould (India): amzn.to/3dIWkxx
• x-acto knife (India): amzn.to/2JtofE6
• Adhesive used for studs: E6000 (US) or Araldite (India)
*************************************
This is not a promotional post.
*************************************
Ways to get in touch:
Email: paintedearthbyneha@gmail.com
Facebook: mypaintedEarth
Blog: nehagopinathpillai.wordpress.com
Instagram: / paintedearthbyneha
Pinterest: / mypaintedearth
KZfaq: / paintedearthbyneha

Пікірлер: 202

@AshWorldOfArts 8 ай бұрын

Its so beautiful ❤

@baluk508 3 жыл бұрын

👌👍

@nehagopinathpillai 3 жыл бұрын

Thank you so much

@wriddhiartstudio6280 3 жыл бұрын

Wow very nice

@nehagopinathpillai 3 жыл бұрын

Thank you so much

@anniejosepht8949 3 жыл бұрын

Awesome mam

@nehagopinathpillai 3 жыл бұрын

Thank you so much!

@shrinivasks4529 3 жыл бұрын

Cute and beautiful neha regards poornima

@nehagopinathpillai 3 жыл бұрын

Thank you so much Poornima!

@SuhaanaShreyan 3 жыл бұрын

Super

@nehagopinathpillai 3 жыл бұрын

Thank you so much

@RamaDevi-du9lp 3 жыл бұрын

Its very beautiful mam.

@nehagopinathpillai 3 жыл бұрын

Thanks a lot

@RamaDevi-du9lp 3 жыл бұрын

@@nehagopinathpillai mam a small doubt. Can we use any plastic bowl instead of mud bowl for beads dipping

@nehagopinathpillai 3 жыл бұрын

@@RamaDevi-du9lpmine wasn't a clay /mud bowl. It's wood :) sure you can use plastic. Might work better. Please do it only in small batches with little paint. If it works then you can continue with the rest.

@RamaDevi-du9lp 3 жыл бұрын

@@nehagopinathpillai thanks mam. After I tried I will tell u how it camed mam🙂

@ankithapadma9317 Жыл бұрын

How you make ghungroo beads and stick beads in easy way

@monishajayakumar5921 3 жыл бұрын

Happy ganesh chathurthi to u neha... 😊😊😊

@nehagopinathpillai 3 жыл бұрын

Happy Ganesh Chathurthi to you and your family 💐

@creativecollections4793 3 жыл бұрын

Wow... Beautiful

@nehagopinathpillai 3 жыл бұрын

Thanks a lot 😊

@manjugeda916 3 жыл бұрын

बहुत-बहुत शानदार 👌👌पर ये single string मे cluster कैसे बनाये है??

@nehagopinathpillai 3 жыл бұрын

Dhanyavaad! Aap jab round ghungroo beads ko ek string main daloge tab aisa hi cluster ke tarah rahega. Ek phool mala ke tarah. Maine video main dikhaya hain ki kaise beads ko adjust karke is tarike ka necklace banaya jaa sakta hain.

@AbinavHariharan2014 3 жыл бұрын

Its sooooooo cute

@nehagopinathpillai 3 жыл бұрын

Thank you very much Seetha☺🙏🏼

@vendrikaoleti6272 2 жыл бұрын

Can you please make video for makings of small beabs

@nehagopinathpillai 2 жыл бұрын

kzfaq.info/get/bejne/hNSce9Z8q9bIf2Q.html

@naasosworld5705 3 жыл бұрын

Wow beautiful 🥰, thanks for this video ☺️

@nehagopinathpillai 3 жыл бұрын

You are most welcome 😊🙏

@tmcrafts2560 3 жыл бұрын

Y you not bakking sis .so nice 🌹🌹

@tmcrafts2560 3 жыл бұрын

So nice 🌹 🌹🌹

@nehagopinathpillai 3 жыл бұрын

I do get it fired. I don't own a kiln so I take my work to pottery studio close by and get it done in an electric kiln there. Heres a video on that. kzfaq.info/get/bejne/g8CUjNJ2l8ndoX0.html

@nehagopinathpillai 3 жыл бұрын

Thank you so much

@tmcrafts2560 3 жыл бұрын

@@nehagopinathpillai Thanks for your video sis. Because very useful . good job.congrats for upcoming video's.🌹🌹

@vijayalakahmigv1351 3 жыл бұрын

Wow!! Wonderful video.Very useful.

@nehagopinathpillai 3 жыл бұрын

Thanks a lot :)

@kshitijbansode825 3 жыл бұрын

Mam Please Make Video On Pandent & Bracelets

@nehagopinathpillai 3 жыл бұрын

kzfaq.info/sun/PLrLYTN-iFD17hNysAbzr5TFMMWdhsXJyN Will work on the bracelets.

@gayathrinethra7676 3 жыл бұрын

Thank you so much 😁😁😁

@nehagopinathpillai 3 жыл бұрын

You're most welcome 😊 Thank you for the suggestion🙏🏼

@iloveartsandcraftssivamath7612 3 жыл бұрын

I LOVE LOVE LOVE LOVE THIS ONE....... SIMPLE YET ELEGANT PIECE OF ART.........

@nehagopinathpillai 3 жыл бұрын

Thank you very much☺🙏🏼

@durga5128 3 жыл бұрын

Such an adorable necklace..looks elegant.👌👌👏

@nehagopinathpillai 3 жыл бұрын

Thank you so much Durga🙏😊

@vaishaliraje9681 3 жыл бұрын

Really beautiful

@nehagopinathpillai 3 жыл бұрын

Thank you so much 😊

@abiramisundarirajkumar679 3 жыл бұрын

Beautiful

@nehagopinathpillai 3 жыл бұрын

Thank you so much Abiramisundari 🙏😊

@tamlalwani 3 жыл бұрын

Simple elegant awesome 👌 I m so lucky that I know you and can witness magic in ur hands. Thanks once again 🙏

@nehagopinathpillai 3 жыл бұрын

That is so sweet! Thank you so much Tammanna

@ShashikalaM-xu2vw 6 ай бұрын

Wow, awesome 🙏. Bead size Mam?

@RainchuBhavani 3 жыл бұрын

Wow... U did fantastic job

@nehagopinathpillai 3 жыл бұрын

Thanks a lot 😊

@danielraviprabhath5142 3 жыл бұрын

Super design🙂👌

@nehagopinathpillai 3 жыл бұрын

Thank you so much

@shilpalimje 3 жыл бұрын

This is beautiful...didn't understand how u arranging it in circular manner to get a tube kund of form.....can nose ring can be made with terracotta ..or it will be heavy jewellery for nose

@nehagopinathpillai 3 жыл бұрын

Try it! It's like making a flower garland. I haven't made a nose pin. Never tried but I do know a few who have created terracotta nose pins.

@vaishnavekrishna3806 3 жыл бұрын

Excellent work and it's so elegant Neha ❤️

@nehagopinathpillai 3 жыл бұрын

Thank you so much!

@Srujana533 3 жыл бұрын

Really awesome mam

@nehagopinathpillai 3 жыл бұрын

Thank you so much 😊🙏

@g.ssriramg4a.s.niharikaag518 3 жыл бұрын

Super mam ur creativity all sooper 👌🏻❤️

@nehagopinathpillai 3 жыл бұрын

Thank you very much☺🙏🏼

@krithikaarvind 3 жыл бұрын

Very beautiful... Just like u

@nehagopinathpillai 3 жыл бұрын

You are very kind, but I think the necklace is nicer 😉😊

@ambilitm5868 3 жыл бұрын

Awesomeeeeee... i was searching for this type

@nehagopinathpillai 3 жыл бұрын

Thank you very much☺🙏🏼

@ambilitm5868 3 жыл бұрын

Mam can u show ganesha pendant making

@nivedaravi2241 3 жыл бұрын

Wow. I have wondered how do they make like these kind of necklaces. You made it quite simple to understand. Thank you. You are one stop shop for learning terracota jewelry.

@nehagopinathpillai 3 жыл бұрын

Ha ha, Thank you so much Niveda! Do try this, a little tedious to make the ghungroo beads but when you look at set it's worth the effort!

@shwethayamith 3 жыл бұрын

Neha really i will try tiz....wit silver colour instead of gold for my saree...Neha i am in luv with it....and ur wrk too

@nehagopinathpillai 3 жыл бұрын

Sure please do! I think even silver would look lovely! And thank you, glad you like my work!

@natkhatbhachaaparty3572 3 жыл бұрын

Very cute set mam 👍

@nehagopinathpillai 3 жыл бұрын

Thank you so much 😊🙏

@anooshrisenthikumar 3 жыл бұрын

Inbetween you have used thread balls ...can we use terracotta balls instead

@nehagopinathpillai 3 жыл бұрын

Absolutely! Any bead you want.

@svijayaluxmivijayaluxmi7419 2 жыл бұрын

Hi , how does the joining of beads come like cluster do we put the hole in different places , angles in each bead

@nehagopinathpillai 2 жыл бұрын

Try it. It will fall in place.

@manasagn96 3 жыл бұрын

Beautiful 😍

@nehagopinathpillai 3 жыл бұрын

Thank you so much! 😊

@rathinamalam4348 3 жыл бұрын

Hi Neha very much pleased to see this type of necklace many times I think how they do this type U made us to see thank U so so so much one think I want to know, where did U get threaded beads it's really good to see but I asked craftshop in Chennai they these beads r not available where can I get pl show the link

@nehagopinathpillai 3 жыл бұрын

Glad you liked the video. You can try Amazon. I was just looking for thread beads and this came up www.amazon.in/Aumni-Crafts-Jewellery-Handmade-Assorted/dp/B07RDW88M1?ref_=ast_sto_dp&th=1

@rathinamalam4348 3 жыл бұрын

Thank you Neha I'll try

@supprajaraman7453 3 жыл бұрын

Omg, just 2 days back I was thinking.. "it would be good if you show us tis pattern" 🙈 thanks much ❤️

@nehagopinathpillai 3 жыл бұрын

You are most welcome 😊

@saayaterracotta1306 3 жыл бұрын

Nice.. why not varnish the beads before assembling?? Any advice??

@nehagopinathpillai 3 жыл бұрын

Think about it: I have used 120 small fired ghungroo beads in this necklace. Would you rather varnish them individually or together:) For beads that are bigger I would them individually but not for the cluster necklace.

@saayaterracotta1306 3 жыл бұрын

@@nehagopinathpillai ok.. got it.. for bigger beads it's advicesable to varnish individually B4 assembling.. thank you..

@ColorfulVenture 3 жыл бұрын

Hi mam..I have watched ur video many times & tried too...but the gungroo beads goes in one direction..not visible in all directions..can u pls clearly explain.. Thanks in advance mam

@nehagopinathpillai 3 жыл бұрын

So when you put the ghungroo beads, after you add a few, adjust/move it around so that the beads so that it falls like a flower garland. The process is very similar to that of making a garland.

@ColorfulVenture 3 жыл бұрын

@@nehagopinathpillai I have tried mam..it came out well..😊 thank you!!

@nehagopinathpillai 3 жыл бұрын

@@ColorfulVenture thanks for letting me know! :)

@ramyasri6948 3 жыл бұрын

Hello Neha, Does the beads have hooks? It's not clearly shown in the video.

@nehagopinathpillai 3 жыл бұрын

Yes they do. They are ghungroo beads. Small round beads with nichrome u-pins. Do check the description box of the video.

@ramyasri6948 3 жыл бұрын

@@nehagopinathpillai Thank you ❤️

@shreenithijk7029 3 жыл бұрын

Wow😍😍😍😍

@nehagopinathpillai 3 жыл бұрын

Thank you so much 🙏😊

@subashrivijayviswanath3124 3 жыл бұрын

Thank youuu...for making...❤️I'm the one who asked for cluster beaded necklace

@nehagopinathpillai 3 жыл бұрын

You are most welcome, glad you like it!! 😊

@ammukutty2004 3 жыл бұрын

Neha i have a doubt should we swirl beads and paint together till the beads dries up, or after all beads coated by paint should we leave for drying if we do same wont it stick beads base in the bottom of the vessel

@nehagopinathpillai 3 жыл бұрын

Radha, it's too be done till it dries. Swirl it till it dries completely and becomes non - sticky. But I must also tell you this method sometimes works and sometimes doesn't. Please start doing it in small batches with little paint. You can also do this by hand. Take a little paint and water in your hands and take little 10-20 beads at a time and coat them.

@Vijayarekha1501 3 жыл бұрын

Excellent design mam

@nehagopinathpillai 3 жыл бұрын

Thank you so much 🙏😊

@Vijayarekha1501 3 жыл бұрын

Mam approximately how many ghungroo beads u have used

@umaamrutha5181 3 жыл бұрын

Hai neha mam so many days after I see your work its amezing very nice😊

@nehagopinathpillai 3 жыл бұрын

Thank you so much 😀

@priyadharshini.b7682 3 жыл бұрын

Mam..having a doubt...after varnishing the beads get sticked one with another one ..and it can't be separated..vat is the solution mam

@nehagopinathpillai 3 жыл бұрын

You could try varnishing them individually and then assemble. It's a time consuming process though.

@rashmivikram3881 3 жыл бұрын

Superb as always 😊

@nehagopinathpillai 3 жыл бұрын

Thank you so much 😀

@imeldaa784 3 жыл бұрын

Wow wow Gorgeous Neha mam...😊

@nehagopinathpillai 3 жыл бұрын

Thank you very much☺🙏🏼

@naanbharathikannan 3 жыл бұрын

Shall we apply white as a base color

@nehagopinathpillai 3 жыл бұрын

Not needed I would say.

@ColorfulVenture 3 жыл бұрын

Hi mam.. awesome video 🙂 Pls say which size jumka mould to use for making these beads & what's the size of silk thread balls. Thanks in advance ..

@nehagopinathpillai 3 жыл бұрын

Thank you so much You can use the second or the third size in the jhumka mold. I have used a cotton thread bead but you can use silk thread beads too. They too would look neat. The thread beads used here about 1 cm in diameter.

@ColorfulVenture 3 жыл бұрын

@@nehagopinathpillai thank you!!

@swathiprasad4657 3 жыл бұрын

What should I use if I want the colour of gold jewellery mam?? I use fevicryl gold colour but I'm satisfied with the color? Which one should I use mam?

@nehagopinathpillai 3 жыл бұрын

you can try liquitex. You can also try other brands.

@sasikalaswaminathan6513 3 жыл бұрын

😍😍😍😍😍 simple and awesome👏👏👏

@nehagopinathpillai 3 жыл бұрын

Thank you so much Sasikala 🙏😊

@sasikalaswaminathan6513 3 жыл бұрын

@@nehagopinathpillai 😍🥰🥰

@afrinaru7820 3 жыл бұрын

Mam how do you made these ghungro beads?

@nehagopinathpillai 3 жыл бұрын

kzfaq.info/get/bejne/hNSce9Z8q9bIf2Q.html

@artbeat4204 3 жыл бұрын

Simply Superb👌👌👌 M'm👍

@nehagopinathpillai 3 жыл бұрын

Thanks a lot🙏🏼☺

@vrushalishriyan1 3 жыл бұрын

Hi its really beautiful

@nehagopinathpillai 3 жыл бұрын

Thank you so much! 😊

@supprajaraman7453 3 жыл бұрын

Hello neha, requesting u to show us how to keep mirror on terracotta jewellery.. and how to keep hooks/studs on earrings

@nehagopinathpillai 3 жыл бұрын

Sure. For studs you can check kzfaq.info/get/bejne/oM-ToZuXyZfSZHU.html

@lakshmi1554 3 жыл бұрын

Is varnish is must?

@nehagopinathpillai 3 жыл бұрын

Not in my opinion. I never used to varnish my work for a very long. Just started doing it recently. Its totally up-to you.

@geethaannamalai1176 3 жыл бұрын

Hi mam, I am also making terracotta jewels. When it's baked it turns black colour. But, urs is something different mam. What's the reason mam. Is it due to nature of clay mam?

@nehagopinathpillai 3 жыл бұрын

I get mine fired in a kiln. No carbon emanating materials are added. They are fired in the kiln at 900-1000 degrees C for 8 hours and cooled another 8 hours inside the kiln.

@geethaannamalai1176 3 жыл бұрын

@@nehagopinathpillai Thank u so much mam

@mahendrankamala5037 3 жыл бұрын

Super guru🌹

@nehagopinathpillai 3 жыл бұрын

Thank you so much Mam!

@shyamammu9739 3 жыл бұрын

Super mam 🥰🥰🥰

@nehagopinathpillai 3 жыл бұрын

Thank you so much!☺🙏🏼

@indhunila1850 3 жыл бұрын

Super mam 😍

@nehagopinathpillai 3 жыл бұрын

Thank you so much!

@marippriyamaripriya1099 3 жыл бұрын

Hii mam... How to make this bead..?

@nehagopinathpillai 3 жыл бұрын

Mentioned the link the description box of the video

@shalinivenkat3712 3 жыл бұрын

Mam do you have any link for hole tools for India?

@nehagopinathpillai 3 жыл бұрын

knowhowartcraft.com/hole-maker-1-set.html You can check this out PS: This is not what I use. I just looked it up.

@shalinivenkat3712 3 жыл бұрын

@@nehagopinathpillai tq mam

@jaykashyap6238 3 жыл бұрын

how many beads are used mam (approx)? 100?

@nehagopinathpillai 3 жыл бұрын

120 ghungroo beads

@jaykashyap6238 3 жыл бұрын

@@nehagopinathpillai 👍tq

@vaniviswa6068 3 жыл бұрын

Acrylic paints are different variety matt,enamel,satin so many.which one do you recommend.some time paints without mixing water it looks transparent after first coat on tiny spots.how to handle this.what is the right consistent of paint sometime i see thick up and downs on jewellery.

@nehagopinathpillai 3 жыл бұрын

Check the description box for details on the paints I use. Back in India I would use only pidilite fevicryl hobby ideas acrylic paints. I dilute it with water. If the coat is thin, I wait till the first coat of dry and then repeat with another coat of paint.

@sharam1612 3 жыл бұрын

Nice but how come when u string single line strand it can become cluster like .

@nehagopinathpillai 3 жыл бұрын

It would gradually fall in that manner. You can try it

@shyamvarun3471 3 жыл бұрын

Helloo mam its awesome work.... can u tell me mam which varnish is good n water base too iam from india, if possible can u share a link of that?

@nehagopinathpillai 3 жыл бұрын

Thank you so much! Please do check the description box.

@ab-jv4ws 3 жыл бұрын

Mam... Superb... How to do thread bead.. plz guide

@nehagopinathpillai 3 жыл бұрын

Thank you so much! I don't make the thread beads. I buy them readymade in bulk from India.

@ilakiyathamizharasan5803 3 жыл бұрын

Hi, Neha Which varnish is recommended for Terracotta Jewellery

@nehagopinathpillai 3 жыл бұрын

Please check the description box

@smithaprathap3118 3 жыл бұрын

Very nice.. I am going to try however I have a question here.. When u r mixing gungroo beads with gold n black do we need to keep on mixing it until it gets dry or WATS d process. Because in the video it was cut in between

@nehagopinathpillai 3 жыл бұрын

Thank you so much! You need to continuously mix it with a brush tool it gets dry. But sometimes beads can stick to each other. So don't stop mixing.

@62usha 3 жыл бұрын

Lovely as usual but how is the cluster formed? Is it because of the hole position?

@nehagopinathpillai 3 жыл бұрын

Thank you so much! Yep a round bead with a u-pin (ghungroo beads) will automatically fall in this kind of a formation. You just need to adjust a little and it falls like this. Image a flower garland. It's the same overall principle.

@62usha 3 жыл бұрын

paintedEarthbyneha you mean every bead shall be a u-pin bead right?

@yughashnisakar960 3 жыл бұрын

Please say how you will fire the jewellery

@nehagopinathpillai 3 жыл бұрын

I don't own a kiln so I take my pieces to a pottery studio close by and get it fired in an electric kiln there.

@subashrivijayviswanath3124 3 жыл бұрын

Which Indian varnish is best mam..suggest me

@ammukutty2004 3 жыл бұрын

Link given in description box

@nehagopinathpillai 3 жыл бұрын

Please check the description box.

@nehagopinathpillai 3 жыл бұрын

Thanks Radha!

@subashrivijayviswanath3124 3 жыл бұрын

@@nehagopinathpillai okay mam...and make an video on terrcotta chocker .

@anthra92 3 жыл бұрын

Super mam..! Can you please teach how to make choker necklace in teracotta clay.. 😍

@nehagopinathpillai 3 жыл бұрын

Thank you very much☺🙏🏼 Sure will do!:)

@vrushalishriyan1 3 жыл бұрын

Can you please tell me the gear wire thickness

@nehagopinathpillai 3 жыл бұрын

Don't remember but i think its the standard. About 0.38 mm or something around that range.

@swathiprasad4657 3 жыл бұрын

Mam can you please upload heavy Terracotta necklace video mam!!! I'm waitng eagerly and thanks in advance mam❤️

@nehagopinathpillai 3 жыл бұрын

Sure will try. Not my forte though, never been a fan of very heavy jewellery but will try sometime.

@vijayalakahmigv1351 3 жыл бұрын

Bead size mam

@nehagopinathpillai 3 жыл бұрын

These are about 4mm in size

@aishwaryathirumurugan5336 3 жыл бұрын

Beautiful work mam but making beads is difficult for me and mam I made three Ganeshas for this Ganesh chaturthi and iam happy to share this with u

@nehagopinathpillai 3 жыл бұрын

Thank you very much☺🙏🏼 That's wonderful! Happy Ganesha Chathurthi!

@aishwaryathirumurugan5336 3 жыл бұрын

@@nehagopinathpillai wishing u the same mam

@tatistutis7689 3 жыл бұрын

Hello Neha, i love your work, it is beautiful. I would like to ask you if you could please make rings, i really would like to see what ideas you have about it. Thanks .

@nehagopinathpillai 3 жыл бұрын

Thank you so much! Sure, will do. I have made them, but didn't sell too many of those. So pretty much stopped making them. Will make a video though. Pretty easy!

@tatistutis7689 3 жыл бұрын

👍 Thanks Neha.

@manjulahhanumanthaiah7959 3 жыл бұрын

Mam, beautiful. Y Gunguru beads get broken into two parts and get some splits after a few months though jewelry unused, kept in a box? Which method must be followed to be strong enough gunguru beads and not to get broken? Thank u Mam.

@nehagopinathpillai 3 жыл бұрын

Sometimes beads tend to crack when the u-pin is put. But only sometimes, not all the time. But it's strange that unused pieces are developing splits. Never heard of that. How do you fire your work?

@manjulahhanumanthaiah7959 3 жыл бұрын

@@nehagopinathpillai Layering method in the earthen pot Mam. Spreading soil, saw dust, coconut fibre, broken coconut shell, charcoal keeping terracotta jewelry on it. Afterwards fallow the same method to keep another layer Mam. Keep it for 24 hours after fired. It's also wonder to me how Guguru beads getting broken. Please give me suggestions Mam.

@nehagopinathpillai 3 жыл бұрын

@@manjulahhanumanthaiah7959 okay, what wire do you use for your ghungroo beads? Is it very thick?

@manjulahhanumanthaiah7959 3 жыл бұрын

@@nehagopinathpillai no Mam. Using basic Nicrom wire. Thin it is.

@nehagopinathpillai 3 жыл бұрын

@@manjulahhanumanthaiah7959 Okay, can you email me on paintedearthbyneha@gmail.com with an image of this bead that's split.

@kamanamuley4232 3 жыл бұрын

Beautiful as usual.👌👌👌 Just a small doubt, won't the varnish cause the beads to stick to each other?

@nehagopinathpillai 3 жыл бұрын

Thank you so much Kamana! So to your question - Would you rather varnish 120 small individual ghungroo beads - I think not 😊. Hence this method is easier. These beads are assembled don't move. And if you see the varnish is just a topical thing. I am not putting it all the way through. You can use a smaller finer brush if needed.

@kamanamuley4232 3 жыл бұрын

@@nehagopinathpillai I didn't mean varnishing them individually of course that would be , i don't know madness i guess,😊 but since the beads are packed very close i thought they might stick to one another. I had made a pendant ,which had 4 ghungroo beads on the lower side , but on varnishing they stuck to each other and the paint came off when I tried to separate them. I use bustro acrylic varnish.

@nehagopinathpillai 3 жыл бұрын

@@kamanamuley4232 true, varnishing ghungroo beads are tricky. Once the stock of your brustro is done, try the other I have mentioned in the description box. Heard that's better and dries quicker. Also the way I do it is lay the pendant flat and make sure the beads aren't sticking to each other. Then with a small brush you can apply varnish the visible part. Once that dries, flip the pendant and repeat.

@nishafrancis8034 3 жыл бұрын

Chechy... total how many beads r u used in this necklace?

@nehagopinathpillai 3 жыл бұрын

I have used 120 ghungroo bead. Mentioned in the description box :)

@nishafrancis8034 3 жыл бұрын

@@nehagopinathpillai ok.. thanks Chechy 😄

@ritarajgor8317 3 жыл бұрын

Hiiii neha mam ,How are you ❓,Wow it's looking soooooo beautiful 😍👍👌the necklace is look more beautiful after u add the maroon beads ,its very simple but its own beauty 😍🌹🌟🌟🌟🌟🌟

@nehagopinathpillai 3 жыл бұрын

I am good Rita! Good to hear from you. Hope you are doing well. And thank you very much☺🙏🏼