TerraFlex TJ Hand Throttle
Рет қаралды 17,476
5 жыл бұрынFinally, I install a Terraflex Hand throttle on my Jeep TJ and show you how. One issue with installing a hand throttle like this is figuring out how to hook the linkage up when a jeep has cruise control, since all the slots on the throttle linkage are occupied we have to figure out a solution.
Thank you for watching!
Link to Terraflex hand throttle:
amzn.to/3HaemJ3
@erikdahl3171 4 жыл бұрын
Thank you for posting this video, planning to install one on my TJ and I have cruise control so this vid will make it allot easier!
@EmbarkWithMark 4 жыл бұрын
Glad the video was able to help you out! Thank you for watching.
@sylvanbowyer341 2 жыл бұрын
That shaving catching magnet tho. Thanks for the tip!
@rgsrails 4 жыл бұрын
That bushing is a rubber foot for so many things like Heathkit radios, oscilloscopes and such. Collins, Hallicrafters, and RCA too. Too funny.
@EmbarkWithMark 4 жыл бұрын
I thought the exact same thing when I was installing it!
@oldirtybasser261 4 жыл бұрын
Thanks for the video. It was a big help.
@EmbarkWithMark 4 жыл бұрын
You are very welcome. I am glad you found the video useful!
@MikeUtah 4 жыл бұрын
Thanks for uploading this
@EmbarkWithMark 4 жыл бұрын
You are very welcome, I hope you enjoyed the video.
@BrunoRibeiro-zy7yn 4 жыл бұрын
Thank you man for this video. I'm from Brazil and I'll try to do it in my CJ5, but with bike parts, because we don't have this kit in local market. But watching your video, I think I'll be able to do it.
@EmbarkWithMark 4 жыл бұрын
Awesome! Glad the video was able to help you out. I had to order this kit as I lived in an area where I could not get it local either. But, now that I saw all the parts of the kit, it would be easy to build one. Let me know how building your own goes! Thank you for watching. The cj5s are sweet Jeeps.
@BrunoRibeiro-zy7yn 4 жыл бұрын
@@EmbarkWithMark I'm gonna do it today. I'll search in bike houses for parts and make it out. I'll let you know what happened.
@EmbarkWithMark 4 жыл бұрын
I’m interested to know how it goes. Let me know what you came up with!
@BrunoRibeiro-zy7yn 4 жыл бұрын
@@EmbarkWithMark , as I said, I stopped in the bike shop and spent R$ 30,00, about 7.50 Dollars, and made my hand throttle. It's very simple and is the cheapest upgrade we can do in our Jeeps.
@BrunoRibeiro-zy7yn 4 жыл бұрын
I don't know how to show you the things we do in our CJs and the trails where we ride on them.
@_tob 3 жыл бұрын
It's so tough to get that little cap out of the shifter without destroying it!
@EmbarkWithMark 3 жыл бұрын
So True!
@fabioariastorres3790 8 ай бұрын
Buenas tardes, por favor que precio tiene el adaptador para closht, gracias.
@thomaspeariso5622 Жыл бұрын
Pop the shift pattern plate on shifter knob nut underneath
@EmbarkWithMark Жыл бұрын
Manuals don’t have shift pattern plates. But they do have shift boots, and your right. Looking back, I could have totally done that. 🤦
@alphacorso4644 2 жыл бұрын
Thanks!
@EmbarkWithMark 2 жыл бұрын
You bet!
@jordanrose5480 4 жыл бұрын
Heat gun makes the rubber pliable, pops right out. Just don't get it too close or hot and cook the rubber.
@EmbarkWithMark 4 жыл бұрын
That is a great idea, wish I would have tried that lol!
@fabioariastorres3790 11 ай бұрын
Hola, me interesa para el Clash, pero que sea en español, así mimo que precio y donde comprar en Colombia. Gracias.
@woozhi9218 3 жыл бұрын
Yash easy heel and toe Wait should be hand and toe downshift
@jasonverstraeten7080 2 жыл бұрын
Does it come with the cable clamp to install with cruise control?
@EmbarkWithMark 2 жыл бұрын
It comes with everything you need. I installed it with cruise control and did not have to buy any extra parts.
@cartninja6479 2 жыл бұрын
Can you install this on any car
@jerryrig8648 2 жыл бұрын
There is not reason to take off the shift knob just split the rubber spacer the clamp will hold it together when you put on the lever
@timstarr2055 Жыл бұрын
Thanks for this tip!
@Isaiahdaslayah 5 ай бұрын
What site did you buy from
@EmbarkWithMark 5 ай бұрын
Sorry for the late reply, here you amzn.to/3HaemJ3
@justingongora3834 3 жыл бұрын
Use a oil filter wrench to take off the shift knob. Should work with some effort. Sure is damn hard to take off that thing
@EmbarkWithMark 3 жыл бұрын
I’m wondering how that would work. Interesting idea.
@justingongora3834 3 жыл бұрын
@@EmbarkWithMark that’s how I took off my old shift knob
@EmbarkWithMark 3 жыл бұрын
@@justingongora3834 I can see that working for most shift knobs. This one has a locking nut under that cap. It may work, or it may just destroy it like I did in the video anyway. I'll have to keep that in mind for future builds though, thank you for the added tip!
@lundysgarage 2 жыл бұрын
How's the hand throttle holding up?
@EmbarkWithMark 2 жыл бұрын
Very well, we use it all the time. It’s been through a lot of changes, including a transmission swap. Easily one of my favorite cheap mods.
@Carbon2wheeler Жыл бұрын
I didnt even realize it had notches. Nice.
@EmbarkWithMark Жыл бұрын
Works well!
@rockshockoffroad4x43 5 жыл бұрын
How much did you pay for that
@4x4offroad70 4 жыл бұрын
$40, which is $10 too much
@fabioariastorres3790 8 ай бұрын
Por favor, en español. Gracias
@levipatzer4276 3 жыл бұрын
Drilling a hole with a open manifold= disaster 😑
@EmbarkWithMark 3 жыл бұрын
I’m not sure what you are getting at. The only hole drilled was into a rubber plug. The cable is sealed tight against that rubber plug. It’s more than capable of keeping out exhaust fumes if that’s what you are concerned about.
@mattdougherty3322 3 жыл бұрын
He’s far enough away from the throttle body plus his magnet trick. I would feel good about drilling that hole. But I do see your point and everyone should take that into consideration.
@codygraves2295 3 ай бұрын
Believe he was referring to the wide open throttle body while you were drilling the hole for the cable
WheeliePete
Рет қаралды 27 М.
The Home Repair Guy
Рет қаралды 6 М.
Quadratec
Рет қаралды 554 М.
Altered Life
Рет қаралды 4,2 М.