Рет қаралды 6,813
Nikola Tesla used an impulse primary coil to excite his secondary. So I did the same, using a solid state series MOSFET switch. only 63W of power was needed to generate 100kV sparks at 1,8Mc/s
This is VERY EFFICIENT due to the recycling of electric energy. The Circuit is explained and shown working, while producing sparks. Not only purple sparks, but also white sparks.
00:00 - Introduction
00:56 - The Circuit Schematic
03:10 - Quarter- vs halfwave resonance
04:04 - The secondary L3 coil
04:32 - The experimental setup
08:51 - The experiment
10:08 - Impulse and secondary measurements
12:49 - Tuning the impulse to the secondary
13:46 - 63W input giving 100kV
14:31 - Clear image of the white spark
15:18 - OOPS!
17:17 - Conclusion
This is part of my open source research, no patents can or will be applied.
If you want to fund my research you can do so by giving a donation on my PayPal channel:
www.tinyurl.com/MasterIvo
which brings you to my PayPal page:
www.paypal.com/donate/?hosted...
Your support is much appreciated!
Website with more info:
magstar.eu/
Instagram:
/ master.ivo