No video
Tesla Model 3 - Rear Hatch Bulk PPF Install
Рет қаралды 23,096
Күн бұрынIn this video, Eric goes over how to do a bulk rear hatch paint protection film installation on a 2021 Tesla Model 3!
Join this channel to get access to perks:
/ @driveprotected
If you have any questions about installing PPF on your vehicle or any questions, comments or concerns, feel free to email Eric at eric@reflectionautomotive.ca
Follow Eric on Instagram: @eric_sawatzky
Follow us on Twitter: @Drive_Protected
Follow us on Instagram: @driveprotected.shop
Follow us on Facebook: @ Drive Protected Shop
Find your pre-cut patterns here: driveprotected...
How To Mix PPF Solutions: • Video
How To Wrap Edges: • How To Wrap Edges With...
Tesla Model 3 Front Bumper PPF Install: • DIY - Step By Step PPF...
@masagsxr 2 жыл бұрын
Yup.. would love to see how you trim and finish the edges ends.
@vanderdetails.detailing. 2 жыл бұрын
i was just about to ask the same lol ;-)
@Jdm_fl5 Жыл бұрын
I waited 4 hours before trimming after squeegeeing . Started with the trunk and worked on the front end after
@Nver91 Жыл бұрын
You made this look really easy. Fantastic work as always, Eric 👍🏻
@DriveProtected Жыл бұрын
Thank you!!!!
@FrankA-973 2 жыл бұрын
Great video. That film can really take a stretch. I appreciate how detailed you explain things. Meticulous work. 👍🏼
@DriveProtected 2 жыл бұрын
🙏🙏🙏
@aldovirzi809 Жыл бұрын
Hey Eric, I love the fact that you work alone. Peeling the ppf of and laying it by yourself is perfect. Your video's are straight to the point, well done. I struggled with the mirrors and rear bumper on a 2021 Toyota Prado. If you have done one would you mind sharing the link. Thank you for sharing your knowledge.
@DriveProtected Жыл бұрын
Thank you for the kind words! I have never done a Toyota Prado before so I wound be unable to provide any direct advice on it unfortunately.
@GdayFraz 2 жыл бұрын
Thanks for these videos! I put out similar content for vinyl wraps and it’s nice to see someone doing this for ppf!!
@DriveProtected 2 жыл бұрын
Thanks for the kind words! I admire and respect vinyl wrappers! It takes a unique skill set that I don’t have to master that art haha!
@billh3860 2 жыл бұрын
Enjoyed your video very much. It just showed me something I think best left to the Pros.. like yourself sir. Thank you.
@DriveProtected 2 жыл бұрын
🙏🙏🙏
@akramsayyed5206 2 жыл бұрын
Pls make the videos on final edge touch also that is very important part of Ppf installation
@sl7085 2 жыл бұрын
Yes please would be very good to see it until the end. Many Thanks
@AGS677 2 жыл бұрын
Man you made it look easy, great installation buddy ill try it bulk
@DriveProtected 2 жыл бұрын
🙏🙏🙏
@jetsamjetsam 2 ай бұрын
after diying the front bumper i can see how difficult the spoiler area would be
@tonyr862 2 жыл бұрын
Great work. We have a 3 coming in tomorrow for full ppf satin. 👍
@DriveProtected 2 жыл бұрын
Awesome!! What colour!?
@tonyr862 2 жыл бұрын
@Drive Protected its charcoal grey. We use suntek films so it will be ultra matte. 👍
@DriveProtected 2 жыл бұрын
That’ll look slick!!
@AutoDetailDoctor 2 жыл бұрын
Awesome video! Thank you! On a lighter subject, where did you buy your pump sprayer? I’m having trouble finding a good one. Who made the one you’re using?
@DriveProtected 2 жыл бұрын
You can find them on Amazon.
@Anonymist79 2 жыл бұрын
Made it look easy 👌
@DriveProtected 2 жыл бұрын
🙏🙏🙏
@muddasarnaik2960 Жыл бұрын
Thank u so much
@megawatts 2 жыл бұрын
Nice work!
@DriveProtected 2 жыл бұрын
🙏🙏🙏
@Golions2084 Жыл бұрын
Nice freehand job, very clean. I haven't done an install in over 10 years and I'm interested to work with these newer films. I used to work mostly with 3M because all other films were still in the "infant" stages. Please let me know what film you recommend using and also curious to know which software program you use. Thanks. Again, nice work.
@DriveProtected Жыл бұрын
Thank you for the kind words. In this video I was using XPEL Ultimate Plus PPF. XPEL has a great cutting software called DAP (Design Access Program) that is top notch with patterns. SunTek is also a great film and their cutting software Core is really good from what I hear as well.
@Golions2084 Жыл бұрын
@@DriveProtected thank you for the info and taking time out of your schedule to respond. Blessings to you, your family and your business as well.
@DriveProtected Жыл бұрын
Thank you, and I wish the same to you and yours as well.
@caileymcdaniels5685 2 жыл бұрын
Fantastic tutorial Eric. Do you have pre-cut Xpel Stealth kits? Do you even recommend pre-cut stealth kits?
@DriveProtected 2 жыл бұрын
Thank you! 🙏🙏🙏 yes we can get you pre-cut Stealth. Shoot me a email at eric@reflectionautomotive.ca
@Beyondspotlessauto 2 жыл бұрын
Another nice one, i have to agree damn u make it look so easy!..when do you know you stretched it enough? will the film ever tear or get compromised with too much stretch?
@DriveProtected 2 жыл бұрын
Thanks! The film has 60% stretch before it can no longer retract into original form and I’ve never gotten anywhere near that.
@bshupejr Жыл бұрын
Why cut the recording before completion?? The finishing details are the same or even more important than the field work.
@DriveProtected Жыл бұрын
We cut the recording because most people don't watch to the end, and I have covered finishing work in many other videos.
@ThatFlyGuy98 2 жыл бұрын
Love to see you work! Do you like pre-cuts better than bulk or vice Versa ?
@DriveProtected 2 жыл бұрын
For the most part I’ll take pre-cuts over bulk but for a panel like this, I’ll take bulk.
@TheCarGuyWV 2 жыл бұрын
You make it look so easy, I would’ve had 15 creases in it. Lol
@diegom3798 Жыл бұрын
what is that firs liquid u spray into the ppf and the second u call tag solution?
@DriveProtected Жыл бұрын
Slip solution and tack solution!
@JesusHernandez-kh1vg 2 жыл бұрын
Do you not get a lot of slivering with that much tack solution??
@DriveProtected 2 жыл бұрын
Get no slivering!
@hypervenom9058 2 жыл бұрын
Hi, how do you mix your tack and slip solution? Thnx
@DriveProtected 2 жыл бұрын
Link in video description
@hypervenom9058 2 жыл бұрын
Thnx, love your video’s 👌
@DriveProtected 2 жыл бұрын
🙏🙏🙏
@virgoartjiribam1484 Жыл бұрын
Which company r u using sir
@DriveProtected Жыл бұрын
Defense+
@AdventInnovative 8 ай бұрын
does the emblem have to come off?
@DriveProtected 8 ай бұрын
For the best quality install, it should.
Paint Protection Film Academy
Рет қаралды 30 М.
Paint Protection Film Academy
Рет қаралды 29 М.
ENCORE PPF & TINT
Рет қаралды 2,2 М.
ENCORE PPF & TINT
Рет қаралды 2,5 М.