For 50% off your first month of any subscription crate from KiwiCo (available in 40 countries!) go to kiwico.com/tested All-Purpose hammer: amzn.to/3woB1KC Crown Beechwood mallet: amzn.to/3iF6yE4 Phenolic hammer: amzn.to/3zoyS3F Halder Hickory Deadblow hammer: amzn.to/2TULRty Ball Peen hammer: amzn.to/3pPYhyJ Trustrike Jewelry hammers: amzn.to/3pPJuUG Disclaimer: Tested may earn an affiliate commission when you buy through the Amazon links here.
@RevRaptor8983 жыл бұрын
I can't believe this channel deleted my comment revealing KiwiCo's cultural appropriation. This company is using our cultural and national identity for their company name and are unashamedly profiteering from it and have been doing so since 2011. My respect for Tested has gone right out the window.
@rioncitylife19173 жыл бұрын
Hi Adam, thats a lot of hammers the wood hammer looks like a thor hammer vety cool
@tested3 жыл бұрын
@@RevRaptor898 What? We've been filming all day and haven't even looked at comments until now. We don't see it in moderation, either. Where and when did you post it?
@RevRaptor8983 жыл бұрын
@@tested Like 2 minutes before this post I made. I'm think it might be because the posts had links in them in hindsight. I get pretty mad about this topic because it's really important to us and nobody outside of NZ understands just how wrong this is. I kid you not some parents in NZ have bought these kits and feel like they have been scammed. www.stuff.co.nz/business/109626695/kiwico-not-as-kiwi-as-you-might-think
@87thisguy3 жыл бұрын
Several years ago I made the mistake of hitting a hammer against another, one head shattered sending metal into my arm, had to have surgery to rejoin severed nerves and remove 4 piece of metal from my arm. About a month later the mythbusters episode about hammers aired lol
@derikdotnet3 жыл бұрын
"A nail is a way we used to hold shit together" I loved that xD
@thenerdlabofficial3 жыл бұрын
It also seems like he realized he "accidentally" let that slip because right after that there was a slight pause and then starts to laugh.
@TheWeirdSailorMan3 жыл бұрын
Also before nails, a good woodworker managed to make items without a single nail and the item was in one piece for ages. Even houses were made like that.
@opheriaux2 жыл бұрын
@@TheWeirdSailorMan flat cut nails were commonly used, unfortunately modern nails are not nearly as good at their job as flat cut nails were
@SgtSnippy3 жыл бұрын
6:45 "The shape of your peen has a specific effect on what you're hammering." Great advice, not only for the workshop.
@jasons.81253 жыл бұрын
The mere fact that there are talks (on hammers) being given by hammer experts makes me happy as shit.
@goodwolf1523 жыл бұрын
Virtually every house in America is still held together mostly with nails. Ironically, most of those nails are not installed with a hammer.
@Ryan6.0223 жыл бұрын
Well interestingly enough the component in an air nailer that strikes the top of the nail is indeed called a hammer.
@goodwolf1523 жыл бұрын
@@Ryan6.022 Touché!
@Jolamprex3 жыл бұрын
I was just thinking about how the claw hammer was almost certainly designed for framing houses.
@thomashverring94843 жыл бұрын
A framing hammer is just a long claw hammer.
@blahfasel20003 жыл бұрын
@@Jolamprex It's similar but not the same as what carpenters use. A carpenter's or framing hammer has one of the claw teeth elongated and sharpened to a point. This can be used to move around lumber by using the tip as a hook that gets rammed into the wood (this will leave a deep mark of course, but that doesn't really matter in framing that will be invisible anyway). Also the flat end of the hammer is usually ribbed to give it more grip and make it less likely to slip off a nail head when striking hard.
@etymology33 жыл бұрын
Hi Adam, you have indeed shown "the convincer" before. It might have been in the thwacker video or at some point around that period.
@chrismiller123413 жыл бұрын
I was just about to say this. And you comment was right there. 👍
@Hell4Gamers3 жыл бұрын
Yeah, as soon as he said that I rushed to the comments too. lol
@brandonejem86203 жыл бұрын
Yep, I'm here to echo the same!
@linuswalden Жыл бұрын
Ah, the thwacker - the hammer that broke before ever hammering on a thing.
@davidwarren92043 жыл бұрын
Consider adding a dead-blow mallet to your collection. Dead-blow mallet heads contain a chamber full of sand, small lead shot or similar. They are great for transferring energy into the workpiece instead of the tool 'bouncing back'...
@ryzellon3 жыл бұрын
Here's the video from July 2020 where he talks more about the mallet he showed at 3:57, which is a deadblow: kzfaq.info/get/bejne/o6-SYJZ4s5imnIk.html (and the earlier portion of that video includes him talking about The Convincer)
@blackoak49782 жыл бұрын
I think he has one. He used it to make the new clip for his all in one tool
@mikem54752 жыл бұрын
I've never felt the need to use a tool which absorbs energy. I definitely don't care about a hammer bouncing back and being ready for the next swing
@fireballxl-57482 жыл бұрын
@@mikem5475 Well, it appears you have no need but for us serious users of the "hammer"...a dead blow comes in very handy. BTW, you do know a dead blow hammer does NOT "bounce" back like an ordinary hammer, right?
@mikem54752 жыл бұрын
@@fireballxl-5748 where on earth would you want a hammer that doesn't bounce back? You're shaking a baby rattler that exhausts you
@toggtlas70993 жыл бұрын
"I can't believe I haven't shown you [the convincer hammer] before!" Because you have. Like 3-4 times. 😅
@Call-me-Al3 жыл бұрын
It's as fun every time :D
@Verlisify3 жыл бұрын
I believe Adam showed off that hammer in a Q&A before with almost the exact same story
@biduleman69413 жыл бұрын
Multiple times, also he designed another hammer based on the little thwacker he loves so much but it was too heavy and the handle broke. He repaired it with twine or leather but even then he didn't find it super comfortable because of the weight.
@PilotPhteven3 жыл бұрын
Just like the several times he took us all up to the loft for the very first time. And always shows us all the mythbuster bobbleheads for the very first time.
@AdrianEdmundson3 жыл бұрын
Hey, give Adam a break. He can't possibly know how many times he's taken us into the loft or shown us the bobbleheads. He's a busy person. Just kick back and enjoy his enthusiasm and genuine happiness.
@PeterPetersNL3 жыл бұрын
Everyone tells things for the first time over and over. Usually things they love talking about. Because of the enthusiasm people don't often tell you they have heard it before a couple of times. 😀
@guitarinjustin3 жыл бұрын
I am extremely disappointed you didn't include on the table your book "Every tool's a hammer."
@klo16793 жыл бұрын
The book hammer
@MrJruta3 жыл бұрын
Unless it’s a screwdriver, then it’s a chisel 👍
@MaximNightFury3 жыл бұрын
If he had the one that someone turned into a hammer, then he definitely would
@klo16793 жыл бұрын
@@MaximNightFury he does actually have that hammer. He probably forgot to bring it out
@ecksdeeeXD3 жыл бұрын
@@MrJruta I've used the handle of a screwdriver to whack stuff before by holding it by the bit. It's a hammer lol
@mm97733 жыл бұрын
Something I learned surprisingly late about hammers: if you don’t have enough thwack, don’t start hitting the thing harder - get a bigger hammer. It really makes a difference.
@Sickzero3 жыл бұрын
After 3.5 years of vocational training I became a certified metalworker in Germany, and I still have the hammer I had to file by hand as one of the first exercises!
@Valkyrie_Coach3 жыл бұрын
“... Was that too dark?” Not at all, and damn accurate
@dawnqwerty3 жыл бұрын
I’d rather learn, then keep everything light
@driuba3 жыл бұрын
I remember watching the video when he made his brass twacker. It was so pristine and shiny at that time and it's actually delightful to see it darkened and dinged, and just used. I don't often see it used in the videos, but it sure as hell was.
@backpacker34213 жыл бұрын
If I remember right, the Crown wooden mallet is made of beechwood. One important feature of that design is that the striking faces are NOT parallel. They are angled so that the face naturally strikes the target straight on, spreading the force as much as possible. Used a lot by woodworkers to bring tight joinery together.
@MopGunZ933 жыл бұрын
He had me at "the shape of the peen, having a specific effect on what you're hammering"
@BobHannent3 жыл бұрын
My grandfather was a master of all trades, he studied art, then became a silversmith apprentice, and when he couldn't get a place a goldsmith he became an advertising artist, retiring as a newspaper photoshop artist (pre-digital). But he also made his own furniture, made radios and even his first TV was home made. His pride was the silver teapot he made as a proof piece when he was an apprentice. It had a hammered texture that must have taken him an age to make. My grandmother, in later years took it somewhere for cleaning as a surprise for their anniversary, the cleaner polished out his fine hammerwork...
@genericaccount92223 жыл бұрын
I always love how enthusiastic Adam is about his tools
@thomaswirt15062 жыл бұрын
I'm a tool junkie also, and I have a plethora of hammers. My favorites are my dead blow hammers. I have probably a dozen or better, large 8 lb. & small 5 oz. One thing I enjoy is making my own handles for my hammers and axes. Thanks for sharing your collection
@Joe___R3 жыл бұрын
Adam, Your favorite ball peen hammer is actually a planishing hammer with a nice custom handle.
@damopee3 жыл бұрын
Love the channel Adam. Even better the image of 30 MB crew beating the crap out of a car at a BBQ. Because Hammer. Bloody marvellous!
@FearsomeWarrior3 жыл бұрын
For anyone that is interested. Crown Tools mallet is made from beechwood from beech trees. I have a love for what Germany area calls engineering hammers. I have a few sizes of them made by Gedore. I think they’re a very sexy hammer and use them for everything. Halder makes Simplex hammers that are great too if you’re into the German made stuff. Cannot forget about the Vaughan NT150 that all fans of Paul Sellers admire. It’s a fantastic hammer and the most ideal for chisels for woodwork. I also consider it the most useful all around hammer. Barry King makes my favorite mauls and mallets for leatherwork like hitting pricking irons, punches, and stamps. Adam wrote a book called Everything is a Hammer and didn’t put a random irregular item that is not really a hammer on the table. Nothing but love. :)
@Vickie-Bligh3 жыл бұрын
Thanks for the coda, Adam. That image of everyone smashing a car brought such a smile to my face. Thanks for the show & tell, Adam. Thanks for the excellent filming, Gunther, and nice, nice editing, Norm. You all show why this is such a wonderful channel.
@Mtlmshr3 жыл бұрын
Mr Savage, as a metal fabricator of 40 years I have some experience with hammers. One thing I will say is that almost all of my metal shaping hammers are highly polished with all the edges of them rounded over, this does a couple of things, one is that if you have dings and dents in your hammer face it will imprint that onto the material you are hitting the other is because we are not machines the polished radius of the edges makes it less likely to leave a mark by a errant blow. I do however have hammers that are just for….as you put it “Thwacking!” Things! Keep cool carry on!
@halwk67972 жыл бұрын
I'm an instrument repairer and i was waiting for someone to mention this
@johnnylightning14919 ай бұрын
Thanks Adam, now I have something to show my wife when she wonders why I need a tool box full of hammers. Keep the good stuff coming.
@markdavich58293 жыл бұрын
Finally, a video on the fix-all tool... the hammer.
@mr.matthews672 жыл бұрын
I love how excited Adam is about Hammer handles... I wish I was excited about anything as much as he's excited about Hammer handles. 😆 It's so entertaining to watch him marvel over such ancient technology.
@williamcarothers23 жыл бұрын
Wow, in this video, every tool truly is a hammer.
@kbjerke3 жыл бұрын
You can tell a good mechanic by his assortment of hammers. True fact. Also, we sometimes call them precision percussion alignment tools, or in extreme cases, a "swing press." Thanks, Adam!!
@qwadratix3 жыл бұрын
A Brummagem screw-driver is the usual term in the UK.
@Ddabig40mac3 жыл бұрын
Thumb detctor.
@bearschmidt31803 жыл бұрын
As a Carpenter that I am , nothing compares to hand driving 16 penny nails with my long handle 22 oz Estwing Hammer. It's meditative.
@2wheelinheathen2 жыл бұрын
I'm very surprised that I didn't see any dead blow hammers of any kind! Such a lovely thunk they all make when striking. So satisfying.
@rord3 жыл бұрын
I never thought I’d ever say this..but I am jealous of your hammer collection.
@bendeakin29233 жыл бұрын
My dad had that exact same red claw hammer with the black rubber handle. That brings back a lot of memories. Also a episode about how to go about making sets for cheap would be amazing rn as I am trying to put together a short Film on a shoe string and the set is a big part of concern
@SeanBlader3 жыл бұрын
Hehe, Adam. "I haven't seen a nail in years." Despite having videos all up and down the channel where he's using his brad nailer.
@Charok13 жыл бұрын
the nails are so small they don't count, haha. I think what he means is everyone uses screws now normally.
@CountDoucheula3 жыл бұрын
Pins don't count
@smolscale3 жыл бұрын
@@CountDoucheula brads and pins are different
@p3chv0gel223 жыл бұрын
I'm not sure if it's done differently in the US, but i was helping to rebuild the roof of the Barbecue hut in my village and we used mostly nails. Even in my small Workshop at home, i use more nails than screws
@PheonixRise6663 жыл бұрын
@@p3chv0gel22 roofing and pallet/skids are probably the last holdouts for large scale nail usage.
@matthewlofton84653 жыл бұрын
I think it was on one of the History Channel shows at the time, but they featured some hammerwork being done on the exteriors of battleships. In that instance, they were beating out deformities in the steel plating with 2 large sledge hammers. Specifically they were using one of the sledges as a cushion for the other to avoid denting the steel.
@trivialtrav2 жыл бұрын
Deadblow Hammers are my favorite. Hitting something hard at full force and it barely rebounding at all still feels cool.
@rosejuliette91803 жыл бұрын
I would love to see more tool tours. I also would like you have to shown the hammer that KZfaqr made out of your book because more people need to see that.
@tetsubo573 жыл бұрын
Another good place to find cool old tools are estate sales. Often people are just looking to get rid of things and you can pick things up cheaply. And you get to pick through an old tool collection. So much fun.
@WT.....2 жыл бұрын
I'm not a hammer fanatic/tool expert, but I work as a general metal craftsman who works with oriental designs & tools. A hammer I would recommend Adam try out is something called the 'dog head' hammer and has its origins in Japan. For those that have never used it before, it looks awkward to use at first, but I've found it's good for fine/precision hammering metal surfaces and hammering in/around tight spaces. Also, I'm sorry, I know it was pointed out in the video and am aware that most people would not know the difference, but it's a pet peeve of mine that I just need to get out of the way (it won't hurt to know). The term 'hammer' is generally used to describe something that uses either a metallic head or a metal striking face to deliver an impact, if the 'hammer' has a non-metallic striking face, then the correct name to be used is a 'mallet'.
@davidp28883 жыл бұрын
"They're out to get me." Love it.
@davidmaurice20743 жыл бұрын
Hey
@petercharles64623 жыл бұрын
As a woodworker, Victorian home restorer, and general tinkerer, every time I grab the trigger on a power tool my brain says "where are my hands, where is the (blade, bit, belt, etc...) going?" Still have all my digits.
@davidmaurice20743 жыл бұрын
@@petercharles6462 what digit dear?
@bwhog3 жыл бұрын
Did anyone else shiver a bit when ex-mythbuster Adam Savage, mister "Failure Is Always An Option", mentioned doing gunsmithing? :D
@MrJruta3 жыл бұрын
Lol of all the tools I’ve got, I love my hammers. Just so simple. None need updates, run out of battery or become obsolete. I’ve got everything from estwing framing to Wilton BASH, to a starrett toolmakers hammer. I love them all 🔨
@kelseywatson19743 жыл бұрын
Made myself a small brass thwacker recently and its a joy to use!
@1pcfred3 жыл бұрын
I've made a medium sized brass hammer. I just don't run into brass hammers to pick up very often.
@viciousna3 жыл бұрын
In the 90's my dad carried around a miniature ball peen hammer, the ultimate fidget toy
@daveco12703 жыл бұрын
That's a lot of hammers...and not one dead blow hammer in the collection.
@graven20023 жыл бұрын
Was wondering the same thing. Turns out his "daily driver" around the 4 min mark *is* a deadblow, he just didn't mention that feature.
@chrisosh95743 жыл бұрын
I find deadblows to be one of the most useful hammer types there are, I have half a dozen starting from 6 Oz up to 10lb. If you want to move something big or small, one of those will do it.
@thefaboo3 жыл бұрын
He did a tool video specifically on dead blow hammers... maybe two months ago? That might be why he didn't mention them here.
@UnivegaSuperSport3 жыл бұрын
@@chrisosh9574 I used them all the time as a bike mechanic. They're great for generating a lot of force when you don't want to take a big, long swing. Especially great when you don't want the hammer bouncing back.
@assassinlexx19933 жыл бұрын
They are so much quieter too. So the swearing is so much clearer. When you smack your finger
@cactusmann55423 жыл бұрын
I got 3 types-a masonry hammer for rockhounding, a wooden hammer for woodworking, and several size steel hammers for everything else. And of course the meat mallet.
@rschiwal3 жыл бұрын
Savage Hammer! The name for my next rock band
@Weejie20113 жыл бұрын
As a retired violin maker, a nail is not something I held in stock much, though seemingly Stradivari used three of them to hold necks in place. However, I now have a number of horses enclosed in wooden fences and horses, being horses, like to scratch themselves on the fence rails. The rails are prone to being worked loose. So, after decades of smelly glue and carefully matched joints (not those joints), I now head to the fields with a Warrington hammer, or perhaps a claw hammer when it gets serious, and a pocket full of four inch round or oval nails. It's great! New found freedom! Unfortunately, I really desired a shoe and the nails were lost.
@gjforeman Жыл бұрын
Great video. Thank you. My favorite hammer was probably ones we used around our AvGas refueling equipment at a Coast Guard air base in Port Angeles, WA back in the 70's. Much like your brass hammer, it was sparkless, but in pure Government excess, it was made of Beryllium. I think we were told they cost north of $400 apiece. In 1970's dollars. Not sure what that would be today.
@vonkug3 жыл бұрын
I got my younger cousins Kiwico kits for xmas, they loved it. I also love the Hammer Time. I once freed a seized Ford motor by having my friend try to turn turn the starter motor and hitting it with a 40lb sledge. Fun times.
@masonthibodeaux40603 жыл бұрын
As a seasoned body repair man, I approve of this video.
@ivanmehboob3 жыл бұрын
My sister bought me a tiny wooden mjolnir and the first thing I said was "omg I can use this as a thwacker" I love it to much
@TheSpeep3 жыл бұрын
As a relatively new amateur blacksmith, I envy your collection, and I want some!
@nineteenandfortyone3 жыл бұрын
I have a hammer that has proven itself to be quite handy. It is a 1-1/2 foot pipe with the end cast into a barrel shaped lead head. It makes an effective short throw mallet. I bought 2 from a person who had them made. They were cast with the name "Porky" on the head.
@carlsoll3 жыл бұрын
Love the fact you continue sharing with us
@comfortablynumb93423 жыл бұрын
Adam's guide to getting hammered would have been a fun title for this.
@WhiteCollarCrimeDNB3 жыл бұрын
If anyone is curious the cross peen hammer is great for stretching a material in one direction but not the other. So if you have a bar of hot metal you want do make thinner and deeper but not longer you smack it in a bunch of spots with the pein parallel to the long edges and then turn the hammer around to the striking face and mush it all down level. Cross pein and rounding hammers are the two you want to go with if you're getting into blacksmithing.
@Mtlmshr3 жыл бұрын
I also made a shaping hammer out of a nitrogen bottle top, just welded a piece of 1” steel tubing on it then I put the rounded end on my 2” scotch brite wheel to polish it up a bit and I had and still have a great metal shaping hammer!
@Brigand2313 жыл бұрын
"I see!" said the blind man, as he picked up the hammer and saw.
@1pcfred3 жыл бұрын
It's blind carpenter you nitwit! Why would a random person possess a hammer and a saw?
@padoco733 жыл бұрын
It was said to their deaf apprentice, so who really knows what was said?
@hamonthecob3 жыл бұрын
@@1pcfred Very much approaching 100% of the people who possess hammers and saws are not carpenters.
@1pcfred3 жыл бұрын
@@hamonthecob perhaps they possess them but they're not picking them up on anywhere near approaching 100% of the time.
@hamonthecob3 жыл бұрын
@@1pcfred Just take your L bud.
@wb5mgr2 жыл бұрын
I had a Craftsman and a Proto version of That removable face hammer you showed with the different color screw on faces. Still have both and they are very useful. Love that you chose to make a tool as a crew gift. Such a great idea for a memorable item people will keep.
@trebormcfarland87083 жыл бұрын
7:30 you said you didn't know what these hammers are called so I felt obliged to share since I'm actually trained in the field they originate from. These are called "Crown Hammers" after the crown of a body panel on a car, they're designed to match a specific radius to help smooth the metal during dent repair on "Crowned"/curved panels. I personally love using them to roll the edges of panel seams because they provide a better finish and aren't as likely to scar the metal as a flat faced hammer.
@dbongoloid95412 жыл бұрын
0:50 "what is a nail, its what we use to use to hold shit together" I've never laughed this hard at adama ever.
@DavidGuyton3 жыл бұрын
This gives me an idea. Adam I'm gonna send you something. Watch for it!
@kobiemaitland62633 жыл бұрын
Hi.
@marioramos49352 жыл бұрын
It's been 7 months, weres the update ?!?!
@DavidGuyton2 жыл бұрын
@@marioramos4935 I wish I knew. Package got there. Never heard a word about it from him or his team. It's a shame too. Would have been a cool project for him in my opinion
@delphic4643 жыл бұрын
Wow! My mini sledge is called The Persuader. I love how these names for tools are a shared experience.
@xxxxxHOSTxxxxx3 жыл бұрын
"A nail is used to hold shit together" - Adam Savage 2021
@csimet3 жыл бұрын
You forgot to mention one class of hammer that I cannot live without... good lead-shot loaded *large* dead-blow... Non-marring persuader. :)
@scotttorres79843 жыл бұрын
I named my deadblow. I call her Deadpool. Yes, Deadpool is a girl.
@1pcfred3 жыл бұрын
I always wreck those. But they are fun to use before they blow out.
@nixhixx3 жыл бұрын
@@scotttorres7984 Gender Fluid
@scotttorres79843 жыл бұрын
@@nixhixx you absolutely get it.
@pmxart71242 жыл бұрын
How we haven't seen an Adam Savage special tool line yet is beyond me. I would absolutely love a savage designed armor hammer!
@blackoak49782 жыл бұрын
As soon as I saw that big hammer I thought "it has a name". It's the hammer that you never want to take out, the one that means something is gonna get hit REAL HARD. There's an ominous finality to it's presence that just demands a name.
@JGL9963 жыл бұрын
I have exactly the same crown mallet, it's served me well for years, and my father before me for even longer!
@jtkachlmeier3 жыл бұрын
Absolutely love when you show us your tool lineups! Please don't stop!
@TheNitro9453 жыл бұрын
My dad works for garland and they make hand made raw hide mallets and acrylic mallets just like the ones you showed!
@arjovenzia3 жыл бұрын
My favorite hammer - Dead Blow. I was hoping thats what the Convincer at the end of the table was going to be (but thats a cooler story). usually made of or have HDPE striking faces, but hollow and filled with lead shot. on the down-stroke, the lead is at the back of the hammer, but on impact, the lead flys forward and its momentum follows through. such a solid, satisfying thing to thwack things with.
@lonestardude62833 жыл бұрын
I never get tired of watching you and always learn something in everyone of your videos!
@Largetalons2 жыл бұрын
4:00 this channel is just full of great suggestions for the random stuff I do.
@buzzmooney2801 Жыл бұрын
About tools looking for your eyes: Back in the first Effects shop I worked in, there was a drywall screw sticking out of a thing, (A crate or sime sort of thriwaway thing) and it needed to be snapped off, because the person who made it, used a 3" screw in 1-1/2" wood. Drywall screws, of course, tend to be easy to snap: just smack it sideways with a hammer. HOWEVER, I was not waering eye protection: just my new glasses. The moment the screw snapped, everything went slow-mo, and I could see it spinning straight toward my right pupil. It left a tiny nick, dead-center in the right lens, and I had to look through that, for YEARS, until I could afford new glasses, again! MORAL OF THE STORY! Eye protection, use better screws, eye protection, use properly-sized screws, eye protection, when snapping screws, place a towel to keep the screw from popping up, eye protection, replace the screw, if you can, instead of snapping it, ans also, wear eye protection.
@mlubecke3 жыл бұрын
Love these story filled videos. Thanks Adam.
@netpackrat2 жыл бұрын
My favorite hammer is one that I made, out of 7/8" 4130 tubing for both the handle and the head, and a tig welded fishmouth joint. One face is a replaceable plastic piece intended for some other manufactured hammer, and the entire head is filled with poured lead that protrudes to make the other face. A couple inches of the handle at the head is also filled with poured lead. Bicycle grip on the handle. It used to ride around in my line box working on Boeings but these days it gets used for setups on my mill and lathe. It looks like total ass after 20 years of use and the paint is long since eaten up by skydrol.
@backpacker34213 жыл бұрын
My wife thinks I'm absolutely insane for having so many hammers (not nearly as many as you - I'm jealous). All I can tell her is "right tool for the right job." Every type of hammer does it's gig a little bit differently.
@passthebs.13413 жыл бұрын
I would ABSOLUTELY LOVE TO see you bang out a bit of armour with just a claw hammer. Not a whole suit... not even a proper size. But what an accomplishment. And maybe a new finesse learned.
@jamesbarisitz47943 жыл бұрын
That two piece wooden mallet is a great one day build.
@adamhutchison193 жыл бұрын
If there ever was a KZfaq video I wish my father could’ve seen it’s this one. He had a thing for hammers. I inherited a vast collection. Everything from tiny jewelers’ hammers to 20 lbs sledges.
@Severalangrybees3 жыл бұрын
I've adopted your method of tools (and often materials too) being out to get me and its made a world of difference to my shop safety
@backpacker34213 жыл бұрын
I got that little replaceable tip thwacker after your tool tip - thank you! It is the perfect carry around hammer, and it also lives in my apron because it is such a little workhorse. Just enough for most jobs I do.
@Hemigoblin2 жыл бұрын
5:30 best noise in the video. I want that as my text notification sound.
@speedymemes81272 жыл бұрын
"That is a peen" is the Adam Savage quote I needed this morning
@nat72783 жыл бұрын
I cant believe you didnt show the AVE copper hammer. I was waiting for it with glee. I adore my favorite technical youtubers referencing each other. Alas I know you have one. Knowing AVE made you one and sent it to you is joy enough.
@j1952d3 жыл бұрын
Don't know about you guys, but in the UK we tend to use the term "mallet" for wooden (and many plastics and rubber) hammers. Lead is tricky - because it's soft, some call it a mallet and some a hammer. We also (archaically) use the terms "maul" and "beetle" for some f-off big malletty-things (as in the name of the Beetle and Wedge Boathouse, an pub on the bank of the Thames).
@Bigrignohio3 жыл бұрын
Waiting for the inevitable "anything can be a hammer" comments.
@ColdestLivewire3 жыл бұрын
what like the micarta hammer made from his book?
@1pcfred3 жыл бұрын
Just if you don't have a decent hammer collection. Then you need just the hammer for the job.
@beauwilliamson36283 жыл бұрын
My go-to 'heavy' hammer when I was a young' un was a scrapped industrial sprinkler joint. About 2lbs of steel bulb at the end of some pipe.
@ripleylivesay30513 жыл бұрын
I think you have that backwards, anything can be a nail.
@1pcfred3 жыл бұрын
@@ripleylivesay3051 anything can certainly be beaten. How far you're going to drive a lot of it is another story.
@HermanVonPetri3 жыл бұрын
"A nail is a way we used to hold shit together" Hey, don't knock nails! (pun intended) The ductile nature of nails as opposed to screws means that they are are less liable to shearing. This is very important in home framing, for example. Also, it's kind of amazing when you start realizing how many tools are just another way of concentrating or redirecting force.
@Sembazuru3 жыл бұрын
Someone needs to get Adam one of AvE's CNC-machined brass persuaders.
@rob45x Жыл бұрын
I'm a mechanic by trade and by far my favourite hammer to use is the Thor copper/rawhide in number 3 size.
@jasonsimpson433 жыл бұрын
When I was machinist / toolmaker a copper and hide Malet is one the best for setting up
@e24mpwr3 жыл бұрын
Been down the hammer rabbit hole. It's really amazing how many kinds of (real) hammers there are...
@atlys258 Жыл бұрын
Man I'd have most likely peed my pants in an uncontrollable fit of maniacal laughter just whacking away at that car 🤣🤣🤣
@axelord4ever3 жыл бұрын
My favorite hammer of all time, as seen on screen, is Andy Dufresne's _rock hammer_ in The Shawshank Redemption.
@dreadswizzard91423 жыл бұрын
ballpein, dead-blow, mallet, sledge, and a standard carpenters hammer are the necessary ones for general purpose.
@andrewharwood6653 жыл бұрын
MR.SAVAGE! long time fan first time commenter. i love your show and grew up watching mythbusters lol i even have my four year old daughter hooked on reruns of the show. i just wanted to reach out to you and tell you that my family has owned a machine shop called Stillion Industries located in Dexter Michigan since the early 70s. we recently boughtout a company called electro arc that builds machines called tap disintegrators. we would love to have you come visit our shop and take a full tour
@chris_dietz3 жыл бұрын
Given the title of Adam's book I half expected this episode to be a catalogue of every tool in his collection.
@CZAnthonyX3 жыл бұрын
i never thought i would be entertained by a video all about hammers LOL
@thescottsman19963 жыл бұрын
one of my favorite ways to drive punches is with a 4lb engineers hammer, but held at the head. it gives me lots of porce, but at very low speed, and thus, very controllable