Adam Savage's One Day Builds: Aliens Colonial Marines Shoulder Lamp!

No video

Adam Savage's One Day Builds: Aliens Colonial Marines Shoulder Lamp!

Рет қаралды 236,936

Күн бұрын

Adam's next big costume project has begun, and it's a painstaking replica of the Colonial Marines armor from the movie Aliens. As part of that ongoing project, he has to fabricate several prop pieces that fit onto the armor, including a distinctive shoulder lamp worn by the characters. And interestingly, most of the components that make up this prop come from found parts that anyone can source online. Thanks to machinist and propmaker Victor Broadley for helping Adam source the parts for this build!
Shot by Adam Savage and edited by Gunther Kirsch
Join this channel to support Tested and get access to perks:
/ @tested
Tested Ts, stickers, mugs and more: tested-store.com
Subscribe for more videos (and click the bell for notifications): www.youtube.com...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/...
Savage Industries T-shirts: cottonbureau.c...
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Joey Fameli www.joeyfameli.com
Gunther Kirsch guntherkirsch.com
Ryan Kiser / ryan.kiser
Jen Schachter www.jenschachte...
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Jeremy Williams / jerware
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / brokennerd
Kristen Lomasney / krystynlo
Intro bumper by Abe Dieckman
Thanks for watching!
#AdamSavage #AliensCosplay #OneDayBuild

Пікірлер: 551

@tested 3 жыл бұрын

Watch more Alien-related videos here: kzfaq.info/sun/PLJtitKU0CAegxRA5Qjut9xbB7EXCQUEAO

@Tony-dh7mz 3 жыл бұрын

Ha! the 3D printer is the live CGI of today,

@Valdarko 3 жыл бұрын

where is the Prospect (2018) movie episode? i thought when that movie came out Adam would go crazy with the suits design, and its an independent movie with a very tight budget, there is a lot of DIY things in there, think you guys should take look

@deelirious_one3893 3 жыл бұрын

What’s with the band around your arm? Thanks for the vid! Always watch before I soeep

@jesseshort8 2 жыл бұрын

@@deelirious_one3893 I'm a bit behind here but better late than never, right? It's to support/relieve tennis elbow.

@ElJohnerino 3 жыл бұрын

Oh! Oh! Right at the end - That's for the motion tracker! EEP!

@shadowhenge7118 3 жыл бұрын

Cant wait for that one. Especially if he could get a working screen off an arduino build or something. Hell maybe even get it working with a motion sensor from a security light or something.

@brianartillery 3 жыл бұрын

@@shadowhenge7118 Or the motion sensor he removed from the alarm box here.

@nline2blast722 3 жыл бұрын

Hammer drill

@chalaohp 3 жыл бұрын

Is it??!!! Yey!!!!

@Merennulli 3 жыл бұрын

Thank you person in the comments. :)

@JerryD9000 3 жыл бұрын

I will never forget seeing my dad's fancy oil drain pan, painted black and about 6 of them, lining the wall of the Borg ship in star trek TNG. It was one of those appreciate the craft moments.

@robmoab3410 3 жыл бұрын

It measures "micro changes in air density" This was my dad's favorite line from the original alien movie. Miss you dad.....

@grayeaglej 3 жыл бұрын

Microphone, its a Microphone. Glad you had a good Daddio. ^-^

@hullinstruments 2 жыл бұрын

Lost my mom this year and in the process of losing my dad. I am very sorry and I hope that with the time and the sadness fades a bit and you remember all of the good things.

@Sock66 3 жыл бұрын

When Adam racked the action on the grenade launcher I had a good "Oh god thats satisfyingly meaty" chuckle, Im sure Im not alone there!

@Squirrelking4395 3 жыл бұрын

They had one on display in Leeds Armouries when I visited, sadly it was behind glass but my god did it look good!

@jeremybeamer3029 3 жыл бұрын

No, you are not.

@dorsk84 3 жыл бұрын

It's a cut down Remington 870 IIRC (I have one and it's like really satisfying to pump) with a SPAS-12 grip put on backwards....

@Squirrelking4395 3 жыл бұрын

@@dorsk84 plus a Thomson SMG in there somewhere.

@jacobbaczkowski7924 3 жыл бұрын

Adam, I can't express enough how much joy I get watching you on KZfaq. It reminds me of being a kid watching Mythbusters. I'm very glad you found another platform to express your creativity and knowledge, and show off your craftsmanship to an audience that should be paying for such a professional talent! Thank you so much, I hope you have a wonderful day and happy belated Father's Day!

@wayneclayton5426 3 жыл бұрын

'Guess we won't need this motion sensor any more' - famous last word for a colonial trooper

@sledgesworld Жыл бұрын

Put Her in charge. Great line. Just love the Uncut Movie.

@rustyforceps1012 3 жыл бұрын

I’d like to see you build the “bathroom buddy” from Gremlins.

@pharmit24 3 жыл бұрын

Ironically I just finished watching Aliens for the first time and loved it and while watching it I was like I'm pretty sure Adam Savage have done one day builds from the movie and here I am!

@katbairwell 3 жыл бұрын

Oh that's brilliant, it is one of those films that I wish I could see for the first time once again!

@Lethgar_Smith 3 жыл бұрын

@@katbairwellThat's why people watch reaction videos. it's a way for people to relive that experience vicariously through another.

@katbairwell 3 жыл бұрын

@@Lethgar_Smith Ha! I never understood why they were so popular, now I get it! Thank you!

@mickeypye2593 3 жыл бұрын

guy actually updates a Chicago typewritter with a digital readout and housing ... the vid is on youtube

@OMrkithO 3 жыл бұрын

He is gonna build all the props, sets and the actual alien from that movie and remake it in the man cave! XD XD

@MagnaRyuuDesigns 3 жыл бұрын

When you run out of the Brown Bess. Vallejo color number 871 is a pretty spot on substitution

@PepperPete11 3 жыл бұрын

Hey thanks for that.

@fleamarketkeanu 3 жыл бұрын

Defo just screen shotted this; I've been trying to figure out how to paint my 40k army, and felt inspired by the Brown Bess

@MatchaMakesThings 2 жыл бұрын

It's insane to me that someone would care so much about such little details about a movie prop recreation. It's even more insane to me that Adam can make me care so much about it. I found myself saying "well of course you gotta switch that Adam if it isn't same as the movie" I've never even seen Alien. Thanks for making, and thanks for sharing!

@TheAngryAstronomer 3 жыл бұрын

When Adam gets to prop building it's game over man, game over.

@RS-ls7mm 3 жыл бұрын

Maybe we can build a fire, sing a couple of songs.

@thomasbecker9676 3 жыл бұрын

He built a replica of a replica.

@FUBARguy107 3 жыл бұрын

Damn it I miss Bill Paxton so much.

@claushollen 3 жыл бұрын

Why don't we put him in charge???

@alaric_ 2 жыл бұрын

They mostly come out at night, mostly.

@ArcticFox63 3 жыл бұрын

Excited for the Pulse Rifle. One of the most iconic movie weapons.

@fen4554 3 жыл бұрын

The sound of the underbarrel charging handle makes me weak in the knees. Sounds like the good one that adam has is made using real shotgun mechs.

@89ludeawakening1 3 жыл бұрын

@@fen4554 it is a real shotgun. It's made from a Remington 870 with the firing pin removed.

@SciPunk215 3 жыл бұрын

... in which you get to see a cup and rag as Adam does his painting off camera. LOL

@charlie9ine 2 жыл бұрын

The hardware store is always the first stop for me. A guy just wandering the isles looking for something indescribable

@mrKozmoz 3 жыл бұрын

I love how the handle for the motion tracker is instantly recognizable

@RjWolf3000 3 жыл бұрын

T-Shirt Idea: “Add a little **whistle toot** right there.”

@JessHull 3 жыл бұрын

if only t shirts had built in speakers.

@patricksanders858 3 жыл бұрын

Dont forget the palm whack and table tap too!

@TheWeirdSailorMan 3 жыл бұрын

@@JessHull Wish it don't, that thing is already annoying as it is. If someone would have that on speaker safe to say he she would lose it forever if I am around.

@teacupoctopus 3 жыл бұрын

I would so buy this

@genesisbuilds1095 3 жыл бұрын

I hope Adam can add a Motion Tracker to the set. It would make a great found parts build since it's all off the shelf stuff. The tracker ping added so much tension in that movie. I'd like to see how he would tackle a functioning screen with current tech.

@Dannyboyefc 3 жыл бұрын

Red thing at the end...

@repletereplete8002 3 жыл бұрын

I'd like to see it too as in the film the hero prop used a crt screen and could only be shot from one front angle as you'd see all the guts of the tv hanging out otherwise.

@thomasbecker9676 3 жыл бұрын

There's no current screens that are the correct dimensions to fit the slide viewer.

@genesisbuilds1095 3 жыл бұрын

@@Dannyboyefc oh yes... should have watched the very end.

@genesisbuilds1095 3 жыл бұрын

@@thomasbecker9676 I have one in my tracker but it only plays a video of the effect.

@snorpenbass4196 3 жыл бұрын

...oh man. I remember those old Humbrol tins. Way before Games Workshop started dominating the market for model paints. My small town had two toystores, one was this oldschool store with a huge train set diorama with trees and bridges and everything (the owner collected model trains). And one shelf was entirely Humbrol paints. I got a VF-1 Valkyrie model for Christmas when I was about eight or nine (1985-86), and bought the paints myself, it was gorgeous, white and red. Long gone now, lost in a move. But the memories just seeing that little tin...

@tobynobel5671 3 жыл бұрын

Found parts are my favorite builds! It's what I can relate to. I am still learning anything scratch built. The Smugglers Room is a great channel for found item props, however they specialize in Star Wars only.

@freqenc 3 жыл бұрын

While painting the light, it looked like Adam was painting a "Drive-In movie speaker".

@JessHull 3 жыл бұрын

who it totally did !

@RGC-gn2nm 3 жыл бұрын

I taught infantry OCS back then. This movie was in our curriculum of how not to lead by rank. Every weapon and system in aliens actually inspired many real life copies

@Ciderwinder 3 жыл бұрын

The larger vaned section of that lamp is used on the Sentry Guns.

@fen4554 3 жыл бұрын

First time I saw Aliens was on TV and it was the extended cut. Fell in love with those sentry guns. When I finally got to see the movie again and it was the theatrical cut, I waited and waited for the Sentry scene and it never came. I was so confused for years until I learned there were multiple cuts.

@TheWeirdSailorMan 3 жыл бұрын

@@fen4554 Damn it to hell with the damn cuts, I wonder which version did I watch... I wish they keep the movies together, we can always take a break, not just chop it up to hour and a half then feel like I watched an rushed 15-20 minute episode instead of a movie.

@Talicey 3 жыл бұрын

Anyone else having mad anxiety about how his laptop was sitting during the first time lapse 😳

@wbradburn8871 3 жыл бұрын

It has gone to the floor before, at least once.

@carlosbovia6813 3 жыл бұрын

That´s what got my attention the whole time.. was waiting for the damn thing fly to hell and Adam make one of his famous scenes... hahahahaha...

@TheShonz 3 жыл бұрын

he has done a time lapse before where it was sitting precariously on a unstable surface as he was working in time lapse it made its way to the floor once for sure and seems it happened again! As it inched towards the edge the tension was unreal!

@Engitainment 3 жыл бұрын

Absolutely nerve-wracking, I was waiting for it to topple the whole time

@geiroveeilertsen7112 3 жыл бұрын

21:03 The tiny little Humbrol paint can REALLY took me back to my youth and making and painting scale models ❤️

@xw6968 3 жыл бұрын

It took me back to my grandpa's basement. The good smell of this paint hehe.

@jaimeborges5885 3 жыл бұрын

Awesome build! Aliens is one of my favorite movies of all time. Looking forward to more Aliens related builds.

@HandyHanderson 3 жыл бұрын

I just love how you explain some stuff by whistling.

@calvinmesser5428 3 жыл бұрын

Hi there Adam I'm so happy that I found that you do this type of things on KZfaq I absolutely enjoy watching you make all the different costumes and props you make it brings joy to me to watch all the awesome things you build

@hotdogreen 3 жыл бұрын

There isn’t much I envy in life … but your workshop is definitely on the list 😀

@Americandegen 3 жыл бұрын

Aliens is my absolute favorite movie and I love the colonial marines. I built the armor out of cardboard and different parts and pieces for my local comic con a couple years back

@Isaac_Norman 3 жыл бұрын

Every time I see Adam paint something I wonder why he hasn't built himself a paint shaker. But not a traditional one, the Savage version that can handle anything from spray cans to the miniature bottles.

@danielclement2832 3 жыл бұрын

Great! Nice to finally see good details on how that light was done. Looking forward to the motion tracker! Weird seeing the pulse rifle brown, but yeah, lighting. Thanks Adam! Thanks Tested team!

@joemedley195 3 жыл бұрын

This explains why the barrel of Queen Amidala’s blaster in Ep 1 looked exactly like the end of the barbecue lighter I had at the time.

@joemedley195 3 жыл бұрын

In case any prop replicators are trying to figure that one out.

@wartang 3 жыл бұрын

I was half expecting to see you pull out the actual prop when you said "let me pull out some reference material."

@dadtype2339 Жыл бұрын

That's great!!! Now, we just need 25 more! Nice job brother!

@oobihdahboobeeboppah 3 жыл бұрын

Hey ah, Adam. Would it be ok to show a still of the real prop in scene w/o the studio sending their xenomorph attorneys after you? I just watched A2 but don't recall what the original lamp looks like.

@asoncsm101 2 жыл бұрын

Hi Adam, Just wanted to say thank you so much for the shoulder lamp build tutorial. I’m building one at the moment from genuine parts and the orientation of the video camera light “vents” was nearly driving crazy! Thanks again Wilsy

@krqkan 3 жыл бұрын

That satisfying "click" when pulling the forend of the rifle.

@RudeSteps 3 жыл бұрын

I love Aliens props! Keep up the good work :)

@anssimyllymaki1624 3 жыл бұрын

Aliens Colonial Marines are one of my favored sci-fi characters!

@itarry4 3 жыл бұрын

The whole set concept and emersion is easily one of the best in my opinion. Apparently Scott made the set have only 1 way in and did other things to make the actors feel trapped and help them get in the right frame of mind when acting. Directors who do stuff like that always get a better reaction etc from their cast.

@michaelmclaughlin3152 3 жыл бұрын

Next shop upgrade: Painting Booth.

@ender4555 3 жыл бұрын

He's commented before that the reason he doesn't have one (aside from limited space) is that there are apparently a lot of regulations and permitting required to build a paint booth in CA. I imagine they are concerning capturing the VOCs/chemicals instead of simply exhausting them directly outside.

@grayeaglej 3 жыл бұрын

Cardboard Box, Box Fan, Paper HVAC Filter, Roll of DuctTape. Done. Why people spray paint all over the place makes no sense to me.

@chriscmoor 3 жыл бұрын

@@grayeaglej Exactly. I've used the same refrigerator box and cheap box fans for years. When I'm done, it folds flat and stores behind a door.

@markwarren7959 3 жыл бұрын

The first time I saw "Aliens" as a kid, I went with some friends for the first showing at Akers Mill in Atlanta. It's a Friday morning, all pumped up getting into it. Then the scene starts where the Marines are in the Atmospheric Processor, going down the dark stairs with the lit up floor levels. All of a sudden Kurt Russell is climbing on top of a cage whispering to some women in the cage. My friends and I are like "Kurt Russell's in this movie-KICK ASS!!!" Some kung foo fighting broke out and we're thinking "what the hell is going on here? The theater lights come on and they tell us that they got the wrong reel. We had morphed from "Aliens" to "Big Trouble in Little China" in an instant.🤣 They gave us passes to come back at a future date. I will never forget that day because it was so funny and we were bummed out at the same time.

@andyholloway4807 3 жыл бұрын

The shop is suspiciously clean and organized in the opening shot.

@brianartillery 3 жыл бұрын

When Derek Meddings was working for Gerry Anderson in the early 1960's, injection moulded polyethylene housewares were THE new thing. A lot of them were familiar tools, but in funky new shapes. Meddings and his team would go to the local branch of Woolworths, and buy loads of washing up bowls, lemon squeezers, colanders, tea and coffee dispensers, etc., and build miniature worlds with them. Dressed with greeblies, painted, weathered and detailed, and then lit and filmed, you'd never guess what they were (apart from the lemon squeezer behind Thunderbird 1 in it's launch silo).

@sledgesworld Жыл бұрын

Love the Video. have a book signed by HR Geiger, and a small piece of Armour. my two grown Ups now own them as i have no space for Books etv. But thank you adam i bought a £10 90 Degree torch, like the one you use , and it lives in my Left pocket. and you wont believe the amount of times i use it. Glad to be a Patron. PEACE.

@RocketPunchHero1 3 жыл бұрын

YES! A shout out to the RPF forum! Always a pleasure to watch the legend at work.

@thomasbecker9676 3 жыл бұрын

Legacy is a better board for Aliens stuff.

@PaulElderDesign 2 жыл бұрын

@@thomasbecker9676 “Fuckin’ A!”

@FeedNFS Жыл бұрын

I bought that lamp, the Reflecta 3002, at a flea market. It really gets very very hot! Thought it would be a useful light source for taking pictures, and when I searched it found out it's apparently used on Aliens and this video. Nice build.

@KaidasLibrary 3 жыл бұрын

Us in the aliens legacy costume group rarely if never turn our lamps on because of the heat. We have the breakdowns of every single prop and costume, what the founds parts are with names and ID numbers

@Lego51 3 жыл бұрын

Whats the part he holds up in the end. It looks like the motion tracker body but what is it from?

@KaidasLibrary 3 жыл бұрын

@@Lego51 it's a kango 426 rotary hammer drill. It's the main body of the motion tracker

@xmetal280 3 жыл бұрын

Replicating these found object props is probably significantly more difficult than the initial creation. When they first made these they could slap anything together without a care other than how it looks, but you have to find and position and sculpt everything to fit the creative randomness

@PepperPete11 3 жыл бұрын

MORE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Cept for some reason that piano wire really bugged me. lol. But can't wait to see what's next!!

@exewingfundraisers883 3 жыл бұрын

Fantastic, scared to heck when you drilled a support bar in to the lamp and handle, but hey, looked like it worked well.

@blatatnerror3074 3 жыл бұрын

Adam uses old & found things to make a new thing... Adam's Salvage ?

@fen4554 3 жыл бұрын

Actually really clever.

@grndkntrl 3 жыл бұрын

"Savage Salvage"

@Sebastian__. 3 жыл бұрын

This is why Adam is MVP!

@the_str4ng3r 3 жыл бұрын

This was so immersive I was smelling Adam's paints by 34 minutes near the end. Loved this build, Adam!

@Moondog66602 2 жыл бұрын

Sometimes I feel like Adam Savage is one of the few people who understands me.

@madmakes7993 3 жыл бұрын

While we're here talking about Alien. I finally got my Alien preorders from Weta. The Alien Mini Facehugger is the coolest figurine I've ever owned. Big Shout Out to Weta collectable department!

@AWARHERO 3 жыл бұрын

4:57 Adam: "I'm not going to destroy it." 4:59 Adam, proceed to destroy it...

@3DSage 3 жыл бұрын

I would like to see more found parts builds! :)

@knightsofrreee7961 Жыл бұрын

When it comes to weathering, oil paints are boss- plenty of time to piddle around with them and easily corrected if you're not happy. Thinned oil paints over an acrylic clearcoat and once you're happy , and the oils are properly dry, clearcoat it again.

@messagedeleted1922 3 жыл бұрын

Awesome Aliens is my favourite movie franchise.

@alexmilo 3 жыл бұрын

You can get batteries of all types that charges with micro USB plugged directly into the battery! Not sure how much less capacity they have, but charge convenience is huge for me.

@dave61242 Жыл бұрын

Propcicle. That was outstanding. I have a stomach ache now from laughing

@chriscreativecontent 3 жыл бұрын

I hope you're going to make the whole costume, armour and weapons too :)

@braddocksgarage 3 жыл бұрын

He learned how to make armor from the guy who made the colonial marines armor for the movie! Remember?

@chriscreativecontent 3 жыл бұрын

@@braddocksgarage I know. I've met Terry before and even handled some of his rare original props :)

@itsabughunt6310 3 жыл бұрын

More Aliens please! Love it!

@billthetailor 3 жыл бұрын

Adam! I'm surprised you don't have some form of paint booth, even just a furnace filter on box fan.

@dehnewblack 3 жыл бұрын

Adam… you need a paint shop. Not only out of love for you, but for your tools, and your workshop

@jmalmsten 3 жыл бұрын

I am pretty sure that huge handle teaser at the end is for the Motion Tracker. I do find it funny that similar devices are now available for focus-pullers on film sets. Basically the device makes a single-slice 2D depth-map of what is in front of the camera. Usually with a single line LADAR if I have understood things correctly.

@carlosmondragon6639 3 жыл бұрын

You Sir are the man of all men. God bless you and thank you for your time and wisdom

@harleyrobertson73 3 жыл бұрын

I've been watching mythbusters on Pluto tv and its really cool to see the difference between Adam then and now over a period of nearly 20 years

@michaeldiaz6570 3 жыл бұрын

Noticed your white board "good out comes" , "bad outcomes" would be a awesome tee-shirt

@xanimate 3 жыл бұрын

This is the first time I enjoyed someone not beeping an Alexa command 😂😂😂 Thank you Adam ☺️☺️☺️👍🏻👍🏻👍🏻👍🏻

@metalstormarms 3 жыл бұрын

Awesome! You've gotten ahead of me - I'm planning on starting on my Colonial Marine build after DragonCon :)

@lkchild 3 жыл бұрын

5:28 that screwdriver totally sounds like a dying xenomorph.

@Storyracing387 3 жыл бұрын

Adam, have you made any replicas of the weapons from Aliens? That would be cool to see. Love your stuff 🔥🤘

@TheHoldich 3 жыл бұрын

On the colour of the pluse rifle, Ian Much of Bapty recently confirmed that the screen correct colour for the hero pulse rifles is not brown bess but was a combination of colour washes based on a ww2 german grungrau. Some of the surviving PR's were later repainted in the humbrol brown bess but this was after the film wrapped.

@halrager 3 жыл бұрын

I got so nostalgic hearing the 'clack-clack' when Adam shook that Koh-I-Noor pen...

@pintokitkat 3 жыл бұрын

I remember as a kid (50 years ago) I had my immersion in a sci fi tv program completely destroyed when the evil bad guys pulled out a weapon to threaten the hero and it was a plastic magnifying glass with built in torch that I had received for my birthday.

@NASR20 3 жыл бұрын

Have always wanted a set of USCM gear, might have to take this on once I get my current projects out of the way... Thanks for the inspiration!

@matthew-maxhall948 3 жыл бұрын

Can't wait for all this! Been trying to build props from the movies for years! Be interesting to see the motion tracker if he does one, as I have built one myself and it needs some motivated tiny tweaks 😁

@chazzyb8660 3 жыл бұрын

Dammit - now I gotta to watch the movie again - "Lock and Load".

@ryan9038 3 жыл бұрын

Hey Adam I don't think writing baking soda on a ziplock bag filled with white powder doesn't makes it look any less suspicious. 😂

@GT-oq4jj 3 жыл бұрын

By far my favourite movie rifle. The pulse rifle kicks A

@WiredWorkshop 3 жыл бұрын

That looks awesome!!!! Can’t wait for the motion tracker now. I’m currently working on a custom facehugger stasis tank

@stevezytveld6585 3 жыл бұрын

Hey Man. Just wanted to say thanks. Your one of my sanity points. Especially when you talk about your process. Because, end of the day, it's the process is what counts. Have you heard about CoSy (Costume Symposium) happening here on The You Tube on August 19 - 22, 2021. It's for people who love Vintage and Historic Dress and Costumes and Cos Play. Last years festivities can be found under the moniker of CoCo Vid. Cheers. - Cathy (&, accidently, Steve) Ottawa/Bytown

@atin8996 3 жыл бұрын

I cant wait for more alien stuff.

@diegoramos2701 3 жыл бұрын

The Alien boxes again 👽🛸📦 the unboxing

@MrTheMighty 3 жыл бұрын

It occurs to me that my job, graphic design, has a lot in common with prop making in that we create assets when we can, but when time or customer budget are major concerns, we usually just use purchased assets.

@michaelwilder5932 3 жыл бұрын

The original prop didn't use the screws to hold the halves closed. There is some sort of bent metal bracket that is screwed to the top. You can see it in the Prop Store photos. Specifically the one looking at the back.

@andyelliott3198 3 жыл бұрын

Talking of Humbrol Adam I am from Kingston upon Hull were Humbrol (Humber Oil Company) was established in 1919. I remember the Humbrol factory in Hull which sadly isn't there anymore I guess Humbrol paints are made abroad or in China now.

@ridingwithcj 2 жыл бұрын

Can we get a video on the pulse rifle? Racking that slide was buttery smoooooth

@alanwhitaker3952 3 жыл бұрын

awesome build, looking forward to more....

@TheManion123 3 жыл бұрын

Adams disregard for overspray is impressive. Most impressive.

@MB-nn3jw 3 жыл бұрын

An original Super Intruder alarm is rare to find and expensive, and the marine torch is even harder to find. There is some $$$ spent on that build.

@SulacoBoy 3 жыл бұрын

Truth!

@andrewstarkey2483 3 жыл бұрын

Hi Adam, Great build. Also nice to see you do Aliens props.

@sakukoivu911 3 жыл бұрын

Adam forever my hobby teaching father figure 😅😂

@milothetinker 3 жыл бұрын

Also, you should put a light coat of neatsfoot oil on your leather. It will help with longevity

@JefferyLong Жыл бұрын

I really like Savage's choice of Music in these Videos... I wish he had the info showing.

@PhilG999 3 жыл бұрын

Something I've been doing for years is collect interesting shapes from the plastic packaging everyone throws away! I have a box full of them. Paint on the inside like R/C car bodies are done. I have a custom built 6-wheel drive R/C monster. It started out as a Kyosho USA-1 Monster truck (1/10 scale) about the time of the Pathfinder/Sojourner mission. The only thing levt of the original kit is the gearboxes! Everything else is hand made Aluminum! I have a stack of gold Mylar clad anti static sheets (2'x4') that I scavenged from work. They were used to ship electronic components to us and they were just throwing them away. Until I started collecting them. I built a fun "Sojourner-esque" body. I also am building a Aliens APC body out of pink foam house insulation for it (covered in model airplane "Monokote" that hides the center tires, which don't steer like my fronts and rears do. I use a 4-ch R/C transmitter and can steer front or rear or both. APC being front steer only of course... BTW I have a Schwinn bicycle speedometer on it and its top speed recorded on 12V is 11 mph!