Ask Adam Savage: "The Tools I Always Have With Me"

No video

Ask Adam Savage: "The Tools I Always Have With Me"

Рет қаралды 172,961

Күн бұрын

In this livestream excerpt Adam answers questions from Cohort61, maggs131 and Logan Erwin about which tools Adam always carries with him, why he collects old tools and whether he does preliminary sketches for all projects. Thank you for your questions and support, Cohort, maggs and Logan! Join this channel to support Tested and get access to perks like asking Adam questions:
/ @tested
Stanley Proto Industrial Tool Mini Pocket Screwdriver Flathead Key Chain no longer available, but substitutes available including: amzn.to/3ChhwcL
LEATHERMAN, Sidekick Pocket Size Multitool: amzn.to/3m8G4LS
Car Safety Hammer 2-Pack: amzn.to/3GJkXt8
WORKPRO W051002 10” Flat File: amzn.to/3arIW44
Disclaimer: Tested may earn an affiliate commission when you buy through the links here
Tested Ts, stickers, mugs and more: tested-store.com
Subscribe for more videos (and click the bell for notifications): www.youtube.com...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/...
Savage Industries T-shirts: cottonbureau.c...
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Joey Fameli www.joeyfameli.com
Ryan Kiser / ryan.kiser
Josh Self / puppetflesh
Kristen Lomasney / krystynlo
Jen Schachter www.jenschachte...
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / brokennerd
Intro bumper by Abe Dieckman
Thanks for watching!

Пікірлер: 273

@tested 2 жыл бұрын

Thank you for your questions and support, Cohort, maggs and Logan! Join this channel to support Tested and get access to perks like asking Adam questions: kzfaq.info/love/iDJtJKMICpb9B1qf7qjEOAjoin Stanley Proto Industrial Tool Mini Pocket Screwdriver Flathead Key Chain no longer available, but substitutes available including: amzn.to/3ChhwcL LEATHERMAN, Sidekick Pocket Size Multitool: amzn.to/3m8G4LS Car Safety Hammer 2-Pack: amzn.to/3GJkXt8 WORKPRO W051002 10” Flat File: amzn.to/3arIW44 Disclaimer: Tested may earn an affiliate commission when you buy through the links here

@Rick_TheBrick Жыл бұрын

hey adam do you think you might pick up the new screwdriver from LTT

@GetSwifty Жыл бұрын

Blur those keys!! They can be recreated from images!

@williamwinder3466 Жыл бұрын

5:45 You pronounce the K in Knipex and you would in the name Kevin.

@GIBBO4182 Жыл бұрын

Adam definitely always has a tape measure/ruler with him!

@NaughtyShepherd Жыл бұрын

Probably sleeps with it too ;)

@skezus Жыл бұрын

He defintley doesn't care a comb. He gets closer and closer to Doc brown everyday

@LoonieMoony Жыл бұрын

@@skezus as he should 💅

@claudioomar3819 Жыл бұрын

He has a ruler tattooed on him

@boondogglet132 11 ай бұрын

@@skezus if there is anyone who will build a true to life functional flux capacitor...its gonna be adam...

@olafcoleman9438 Жыл бұрын

The one tool I always carry is a flash light. I'm an Aviation mechanic and I always need a light for inspection in the "Hell Hole".

@jigpu2630 Жыл бұрын

Same. Just an itty-bitty (but high-power!) AAA keychain light has been infinitely useful to me over the years. The world is full of dark little holes and poorly-lit spaces that can be tamed with just a bit of light.

@danriehl4244 Жыл бұрын

@@jigpu2630 which flashlight do you use? Been looking for a good, small light that is brighter than the one on my phone lol

@jigpu2630 Жыл бұрын

@@danriehl4244 My EDC is an Olight i3E EOS (tiny and simple to use since it's just on/off). I also have a ThruNite Ti3 V2 on a second keychain (a little larger but has multiple brightness which can be handy). Neither is noticeably brighter than my phone, but they are usually more convenient.

@extrastuff9463 Жыл бұрын

@@danriehl4244 Depends strongly on what you want, the ones mentioned by jigpu get the job done. There are plenty of options in the AAA powered twisty models, nice and compact. There are also little rechargeable keychain ones like the Nitecore tube as well that are even more compact while still pretty bright for its size. If you want something with a bit more brightness than your smartphone and good runtime though I'd suggest to consider looking into 18650 powered ones. A bit bulkier but nothing massive, personally I'm rather fond of Zebralight both because of their interface and very light minimal extra material. Empty the weight of an sc64c is just 38 grams and the extra space at the head is not much longer than the reflector which is needed up there beyond the battery tube. It's interface while it takes some getting used to is good at being able to turn it on in both low and high modes and get whatever output level you want. But there are certainly cheaper options out there with simpler interfaces, at that brightness level I would STRONGLY suggest to not get something that can only be turned on in its brightest and needs to cycle through modes until you get to that low light one after having ruined your adaptation to low light. Olight used to have a few compact models in production that'd certainly fit the bill (and probably still does), press and hold to turn on at minimum level, one click to turn on at last used one, double click from off to get max brightness.

@bmxscape Жыл бұрын

@@danriehl4244 got one for my dad 3 years ago on amazon called sofirn sp31 v2, its small, removable and rechargeable 18650 battery, seperate button to change brightness/flashy modes so u dont have to cycle every time(it remembers the last used mode), and its tough. a review on youtube said he ran it over by accident and noting happened. for $35 you cant really go wrong

@H____enry Жыл бұрын

Bless this no intro, no b-roll, no filler corner of the youtube.

@mikematthaus6531 Жыл бұрын

"It could one day be useful" sums up a lot of stuff in my collection, not sure how i feel about that though

@SorrensSorrow Жыл бұрын

As long as you don't have to make paths and can actually locate everything you have it's ok you're not a hoarder lol

@darkinertia2 Жыл бұрын

what i love about vintage tools is that you can get them for a crazy deal and theyre usually better or at least pride of ownership of having something made in usa/germany/italy/japan is great. seriously, with 40 bucks and a trip to a flea market weekly ive quadrupled my tools, just yesterday i found that sargent pliers for 5 bucks. ive found anything from craftsman usa, snap on, proto, kd, sk, etc...and all of them with a story to tell

@libertarian1637 Жыл бұрын

I usually always have a single little pouch/holster about 2”x4”x1” that holds a few things quite tightly: Leatherman Wave, small AAA flashlight, o-ring type space pen, and a screwdriver bit pack for the Wave. Usually stays on the belt and is usually always with me. This kit has saved me more than once. I’ve carried some form of knife for decades, ever since maybe the second grade, when I receive my first Cub Scout knife, I believe as a Wolf, and I’ve had some type ever since. They’ve increased in price and functionality as I’ve increased in knowledge and wealth.

@mathewwoods9111 Жыл бұрын

Something my brother and I always kept handy, is a 10 millimeter socket. 1/4 3/8 and 1/2 drive. It's always the one that's missing and always the one you need when its missing

@NemosNightmare Жыл бұрын

I work for a General Contractor and we keep about 6 extra 10mm sockets of various drive sizes for this exact reason. It's literally always the one missing. That and the 3/4 deep socket always seem to grow legs and walk away when you need them most!

@loganl3746 Жыл бұрын

I work with the US Patent Office, cleaning up the drawings, so I see a fair number of electrical diagrams. A video about that would be interesting to me. At the very least some amount of understanding would make my job less boring lol

@thundergod97 Жыл бұрын

I've had a Leatherman Juice CS4 in my pocket for a long while. I've lost it and refound it multiple times. It is the single most handy tool I have carried with me. Also carry a small swiss army knife but if I had to choose between those two, it would be the leatherman. I have other leathermans but that form factor is great for carrying day to day in my pocket.

@wordsinahandle Жыл бұрын

I've only ever needed an allen key and screw driver in my life. Just started cycling at an intemediate level. Could you recommend a portable tool combo i could buy? (I've never really used any tools, but watching this channel i want to be more capable)

@Abdullah34610 Жыл бұрын

@@wordsinahandle - Not a biker, but I've heard some say the Wera Tool Check Plus (either Metric or Imperial, depending on bike) is helpful for such situations. Or was it a different tool combo? Either that or a leatherman (capable of holding bits, like the Surge or Wave) + leatherman bit pack + small wrench (like the 711).

@spevakdesigns Жыл бұрын

@@wordsinahandle check out fix it sticks

@psedulous Жыл бұрын

It is a pleasure to watch your presentations. You are a true Renaissance Man.

@mackmcmillan9905 Жыл бұрын

My favorite old tool I didn't even know I HAD until recently... A 60-tooth 1/4 S-K original ratchet. The knurling is still pristine on the handle. The clicks ALONE are heavenly. The tight articulation of 60 teeth give it a "heft of feel" you don't normally find in a small package. Most any standard 1/4" ratchets, even most "good" ones, disengage entirely (skip) and/or have too much travel for the tightness of space, etc. They're typically sloppy but not this little fella. Got included in a set of roller skates I grabbed a few years back. Never looked in the "extras" baggie. I was missing OUT, lemme tell ya. I'd pretty much written them off as useless but necessary. Hehe

@CVSBobby Жыл бұрын

Adam that force gage is immediately useful to you at the milling machine. Use it to calibrate the force applied by your mill vise by using it in conjunction with a torque wrench. If and when you are doing delicate or thin work in the vice it would be nice to know how much handle twist equals how much clamping force. Also great for calibrating toe clamp force.

@keithc904 Жыл бұрын

My house van is built somewhat around my work shop, heavy and finding places for every thing is tough, but totally worth having what you need close by rather then back at the shop.

@fuzzydragoncosplay955 Жыл бұрын

Adam mentioned having wanted to rig out a sprinter van as a mobile machine shop, during world war 2 there were mobile machine shops built into trailers that could be hauled behind Jeep’s. I’ve seen them pop up a few times on eBay. I’m not sure if they were in service before ww2, but I do know I’ve seen info on them from around then.

@MrBobisadog Жыл бұрын

I have had that same keychain slotted screwdriver on my keychain since 1975. I use it for something every week.

@transmundanium Жыл бұрын

Yup, I have one too. The only time I didn't have it on me was when I lost my keys at an airport, but they caught up with me a week later.

@shawnaroo Жыл бұрын

One of the most powerful tools for creativity/design/making is iteration. Drawing/sketching things before building is basically a way of getting a few loops of iteration for 'free' because you don't have to waste materials making some of the mistakes that you discover while transferring your ideas to paper and organizing them.

@Charlie6969 Жыл бұрын

"It could one day be useful" As a hoarder, this can be a dangerous thing. I have just gotten rid of several garbage bags full of stuff that I never used for this reason, and it is harder than some people might think. But it does feel good to free up space for future hoarding:)

@somedayDefect Жыл бұрын

You are so correct! My father in law was this way. Not only did he grow up during the depression but he was a maker as well so he saved everything. He lived in Los Altos CA. and bought from the same surplus places Adam and Jamie bought from. (He lived near Ames Research where many Mythbusters were filmed). My GOD the crap he collected under the guise of "It could one day be useful". Well when he passed away we went through hell getting rid of all that stuff! Massive burden. I will say it changed my tune. I am a fabricator with many different skill sets and when I came home after all that work I reprioritized what is truly important and what is a wish, dream, or not as important as I had hoped. I have so much more room and a cleaner mindset!

@shanek6582 Жыл бұрын

Lol, I bet the very next week after you got rid of the stuff, you needed one of those items. I know it’s happened to me anyway

@starhawke380 Жыл бұрын

You should work a T.A.R.D.I.S. Sprinter van into a short film sometime... I did a favor for a Doctor one time and he gave me this van.

@saltyspirateden Жыл бұрын

I always carry a little 4 way straight screwdriver that I got from a muffler shop back about 1974 or so. It was their promotional giveaway at the time, and it has always been in my pocket ever since. That said, I carry enough tools in my old car to rebuild it on the side of the road ;)

@chadjones1266 Жыл бұрын

On wiring: Einstein said, "my pencil and I are smarter than I am."

@richardanderson7183 Жыл бұрын

I seem to recall a video that Adam made, perhaps around a year ago, about wiring diagrams, and how he goes through two or three iterations with them. Really informative for me, being mostly a novice at that particular line of work. Additional videos would certainly be welcome!

@paddis12 Жыл бұрын

your tattoo is always with you a real EDC

@chuggon7595 Жыл бұрын

I have a Leatherman Wave+ on my hip most times I go out!! This was at the recommendation of Adam in one of his videos! It may be a tiny bit expensive, but it was BY FAR the best purchase I have ever made in regards to EDC.

@galaxyfrostbite4779 Жыл бұрын

I am actually an aspiring engineer because of you and mythbusters and I just wanna say thank you

@PhilG999 Жыл бұрын

I do this too! One keychain in my left pocket has a AAA flashlight, tiny combination wrenches, and a tiny multi tool. Several knives. Be prepared! 🤣

@ronblack7870 Жыл бұрын

when you mentioned the window breaker , that girl that was recently found drowned in her car the divers found the car upside down. that confirms that many cars do go turtle when then go under.

@msa3491 Жыл бұрын

I agree with the wood handle comfort completely! It allows a consistent mould and firmness around your hands so you can be extra sensitive without the rubber absorbing the force and overdoing a movement you wish to execute sensitively but confidently

@klo1679 Жыл бұрын

In my case as a mechanic, I always have on my person, a keychain, a liner locker pocket knife, and my phone. Three very handy tools to have around. I however have considered starting to carry a screwdriver pen tool, like a small Philips head and a slightly wider flat blade on the other end with caps on both ends. Seeing as I already carry a pen most places

@randomosity4501 Жыл бұрын

I enjoyed the mention of trusting your previous work/ efforts on the R2. I also do a bunch of work and figuring out for my future self in my free time, and when I do I almost never second guess my past self when I get back around to the project or whatever else it may have been.

@Fadaar Жыл бұрын

Trust me Adam, as someone who's been in aviation the last 12 years with 8 of that being in production, a good wiring diagram can make or break your sanity. Being in production you haven't function checked (test department) anything yet, so if things are wired incorrectly you need good wiring diagrams.

@keithklassen5320 Жыл бұрын

If I want to carry a compact tool loadout, a Victorinox SwissTool is always part of it. The relatively smooth plier handles, the dead simple locking mechanism, the solid but not overly heavy construction, plus the general tool selection... I haven't seen a better multitool since I started carrying them in the late '90s or early '00s.

@trailblazer632 Жыл бұрын

Gerber freehand or Leatherman oht plus a beater folding knife, and a Springfield hellcat. Really hard to beat those Leatherman type tools though. The Gerber isn't made anymore but both the oht and the freehand are almost completely one hand operation multi tools. The pliers blades and most of the screwdrivers are all openable with only one hand. Which can be a big deal and something you'll never want to go without ever again if you get the ability. It's just so much more convenient when holding something not having to set it down or find someone to hold it while you fiddle with a normal multi tool that you need to unfold. As a tinker and mechanic it's been a life saver many times.

@asuintrototheatre4317 Жыл бұрын

ADAM MY PROP HERO! I have a request… there are multiple scenes in countless movies and TV shows where the setting will be surrounded by hundreds and hundreds of candles. Could you please explain how this is done in regards to continuity? fake candles with gas flame? real candles with cgi flames? or just good old fashion crew work, lighting and replacing units for the sake of continuity. Thank you for potentially replying. also grateful for any input from the comment community.

@patrickmcdonald2394 Жыл бұрын

Have you ever done a show and tell on your portable tool kit you used on savage builds?

@JaketheJOATGOAT Жыл бұрын

When I am working I carry needle nose plies, knipex pliers wrench, cobra pliers, a bondhus allen wrench set, a box knife, and a #2 Philips screwdriver.

@ottotater2787 Жыл бұрын

Over 50 years ago my grandfather gave me that very screwdriver that someone gave him as a promotion and yes it is fabulous hardened steel fabulous edge took care of it carried it daily and it served me well. Another tool I've carried for many many years is 3 in long vise grips. In my wallet I have a and a 4 inch ruler, a wallet pin with a space pen cartridge so it doesn't skip and a basic Victoria Nox.

@noahorlowski3328 Жыл бұрын

I collect old tools because I build instruments in my studio apartment so old hand tools are my best option, but also they're super cool. I have an 1890's Stanley No. 45 that I love to show people since it looks so confusing, but it's also my go-to tool for cutting truss rod channels in guitar necks!

@baldcadaver3685 Жыл бұрын

I always have a swiss multitool and a cobra mini multitool on my keychain, use it on the daily and has been keeping me handy for years.

@zombiehunter1152 Жыл бұрын

Love that r2 dome sitting on the work bench in the background 👍

@NaughtyShepherd Жыл бұрын

I found a leatherman in a field while surveying a plot of land, still in its leather sheath. Took it home, cleaned it, and it’s been a perfect tool for 15 years.

@joeyromacus8674 2 ай бұрын

just loving that you're drinking ginger beer from my home state in Australia!

@JohnBurke67 Жыл бұрын

Can I ask Adam, have you tried your hand at the Lament Configuration box from Hellraiser, Etching the brass panels etc. I'm in the early stages. It's certainly a learning curve. Thank you for your incredible content.

@T1g3rch3n Жыл бұрын

I'm doing my 3. Gen Lament Config atm Doing the Etching is tricky V1 was spraypaint/laserengrave/iron(III)Ch V2 was CNC Milling V3 is 'oldschool' UV Resist Exposure, Iron(III)Ch

@JohnBurke67 Жыл бұрын

Yes, it's definitely a learning curve. Just sourcing the lament side designs, inverting them them sizing 3" squared. I'm next onto printing onto laminate. Then onto the next stage. I've no doubt the etching is going to be experimental at best.

@SomeGuysGarage Жыл бұрын

Go buy a Spyderco Bug for the key chain! This is my EDC knife that I don't even need to think about carrying and since it's a proper sharp spyderco, you can even cut cardboard and other pretty significant stuff.

@GaryGuss Жыл бұрын

I always have an opinel #6 and I also have a proto screwdriver on my keychain from probably the late 60's to today

@sparkywilson1405 Жыл бұрын

4:00: I work in civil engineering/construction materials testing and we've got a couple older compressive strength machines with force gauges like that. Generally they've been replaced by digital load cells, either on newer machines or retrofits. With both, the cost isn't so much just the price of the thing as it is getting it calibrated every year.

@MorrisonManor Жыл бұрын

I've carried a P-38 can opener on my keychain for over 40 years. I can't count the number of times it has saved me. It's made of some kind of magical, indestructible steel.

@Jonesydawg Жыл бұрын

i found a bottle open when i was 3 or 4 years old which mum kept on her key rings, now being 38 years she still has it and uses it from time to time

@justinbanks2380 Жыл бұрын

Lol, I would love to see you (or anyone else) put a full size lathe or mill in a sprinter van. That would be epic!

@wanglydiaplt Жыл бұрын

Once upon a time my boss needed a force ring gauge and I wound up making it for him. Just to be on the safe side, because of the tightness of the tolerances, I made two. Both came out perfect so I kept one. Still have it, 40 yrs later. 🙂

@jackcarter233 Жыл бұрын

I found an old Snap On shop catalog as a young adult / independent contractor in the early 90s. Their tool aesthetic was perfection to me then. Luckily, their prices were so far out of reach it couldn’t even tempt. But always check at garage sales.

@deegobooster Жыл бұрын

The tool I always carry with me is a tiny Knipex Cobra. I like to think of it as the mother of all tweezers 😂

@SecondFinale Жыл бұрын

The Sprinter shop would be sooo cool to see and use. Also half the price of a house where I live (or more). Dang.

@eaglesight333 Жыл бұрын

Ever since High School Theatre, I always carry a Gerber (pliers/multitool), and a MiniMag flashlight. Along with a Pen, Mechanical pencil and sharpie.

@nclrobotics Жыл бұрын

Thank you for talking about the value of sketching - I will be sharing this with my Robotics club and Engineering Design class this Fall!

@Voirreydirector Жыл бұрын

I had the rare gift of studying music with the amazing Gene Nichols, and he would mark you absent if you arrived without a pencil. His point was that musicians should always be ready to take notes, learn from one another, compromise, and change arrangements at each rehearsal.

@BigDotStu Жыл бұрын

All my keyrings have a Swiss Tech Utilikey on them - philips/flat blade screwdrivers, knife with flat and serated blade sections, bottle opener. Clips on and looks like a key.

@egeoeris Жыл бұрын

A notebook, a pen(preferably multi tipped red-blue-graphite) and trusty 6in calipers. I can drop the calipers occasionally but the grimoire stays on all the time, I highly suggest carrying it around on a holster dedicated to it.

@TheMattwasherein1992 Жыл бұрын

My connection with old tools is restoration. I love restoring hand tools. Not to the point of the lads like 'my mechanics' but restoring them to put them back into service and use them everyday. Yesterday I literally spent 2 hours cleaning every grove of a rust encrusted 40 year old bastard file haha. It was great! And it's now a damn good file. I like that it allows a connection to that tool, it builds a sort of bond to the object. I love that. Great video as always Adam!

@roundcube2948 Жыл бұрын

Well now i'm curious what tool, item, or whatever was the most underrated thing you had. Maybe it was something that you had to actively remind yourself to take with you or to even use. I have a buddy that needs a list around so he doesn't forget why he has some of his equipment, mostly because we have a tendency to use stuff outside their intended purpose.

@somedayDefect Жыл бұрын

I was a collision repair tech for 25 years. I was asked by people from time to time what is my most important tool. I always said my pocket screwdriver that the Snap On, Mac, Cornhole, etc... dealers would give you. I would tell people that I swear I could tear down and put back together an entire vehicle with that tool. Obviously this is complete BS but my gosh, I would perform a tremendous amount of tasks with that free pocket screwdriver! To this day I can't be without it.

@roger_001 Жыл бұрын

For mechanical curiosity also could be the calipers that display the golden ratio no matter how large or short you open them. the ones in the episode when you make a big wide flat drawer for drafting tools.

@ty2u Жыл бұрын

I draw for many reasons and think visually. You bring to Ming “Thinking With A Pencil” by Henning Helms which I read over 30 years ago. BTW it is back in print. Like you vids, they’re a learning experience.

@fredsafarowic3149 Жыл бұрын

My father carried a small Swiss army knife in the army from 1950-52. He had it in his pocket the day he died. Now it is always in mine. For actual use, I have a small multi- tool.

@theultimatesteelshooter8610 Жыл бұрын

I’m 85% complete building a ‘operator on the inside, fully electro-mechnacal Dalek and am doing the same process with the wiring diagram since there are so many systems. I am using a commercial airplane flight control stick so that I can operate all the systems with one hand while driving around inside. The military style control stick has a 4 position cooly hat, 3 different PBIs and the trigger which I can connect to the various servos and mothers running the dome rotation, eye stalk movement, mechanical eye iris, gun, plunger, anti gravity LEDs and the all important voice modulator so I actually sound like a Dalek. Never could do all that without drawing up several wiring diagrams, its just too complex

@deadaccount6135 Жыл бұрын

@The Ultimate Steel Shooter Awesome! You should post a full video on KZfaq, would love to see how you build it. There's a video out there of a premade life size rc one in Britain, people over there were scared and running from it lol.

@K0Kaz Жыл бұрын

I went through the same process when I redesigned the wiring for an old Datsun pickup. When I built all the harnesses, all I did was refer to the diagrams without thinking about whether they were correct. And in the end there was only 1 minor mistake (the dome light would only come on with the high beam switch activated).

@robadams1645 Жыл бұрын

I'm not one of those "everything old is great" people, but I definitely prefer the old wood handles. They just feel so good in the hand.

@wanglydiaplt Жыл бұрын

Re: drawing: it's also helpful for machining complex parts to verify the sequence of operations.

@jogvanjakupsson2952 Жыл бұрын

My sister gave me a Wallet Ninja for Christmas one year. Not the best too. But because I have it on me almost all the time it has helped me out in a lot of situations

@thejacksonmurphy Жыл бұрын

How long have you had your “remove before flight keychain? I’ve had mine for about 10 years.

@infxmhc Жыл бұрын

Maintained Keychain flashlight. Small Keychain canister w/$100 in it. "True" key multi tool key that has many uses. Separate small flashlight. Always on me.

@MurryBob Жыл бұрын

I carry a Benchmade griptillion pocket knife, and a surefire executive elite mini light.

@AlcoholENVY Жыл бұрын

Adam's ruler tattoo counts as EDC measurement tool!

@Slidinsidewayz2009 Жыл бұрын

Bundaberg brewing FTW!!! Noice choice Adam!! ;-)

@REDI2UM Жыл бұрын

One day, I wish to collect a Weltrekord ratchet Screwdriver - Both because it's aesthetically cool, and because it's a mechanical curiosity. It's probably the most gorgeous tool I've ever seen, and I aint even that into tools.

@francisjames1377 Жыл бұрын

It feels good in the hand! (Large file wooden handle)

@georgebeddows9696 Жыл бұрын

Adam you are an old school tool. Beautiful

@garthor Жыл бұрын

I would watch that build... Adam Savage sprinter van for the one day builds on the go... =D

@ItsDburch Жыл бұрын

What was it about the Chicken Canon, that gave you guys such a hard time?

@motivationindrive8514 Жыл бұрын

I just picked up a floor standing gen 4 craftsman drill press for 100 on FB… people talk smack about craftsman but it was the last gen built completely in America, and the fact you can still find them in running and hood condition shows how well they are built… better than 100$ HF bench top or other bench top models currently. Nothing wrong with old tools lol

@InventiveReality Жыл бұрын

I too draw things out to help myself understand them.

@Avaddon911 Жыл бұрын

I always carry a Klein tools folding knife, it's got wire strippers built in and it's easy to open one handed.

@AnnaAnna-uc2ff Жыл бұрын

Thanks.

@WalterMelons Жыл бұрын

Use your seatbelt buckle as a window breaker. Jam it between the window and door panel where it rolls down into and pull towards you and it’ll shatter the glass very easily. Give me a lever long enough and a fulcrum on which to place it, and I shall move the world!

@stanfordcoffee Жыл бұрын

Swiss Army knife - Tinker: every day for the past 2 decades.

@worldwidestuff5567 Жыл бұрын

For last 19 years I've worn a Leatherman Wave on my belt... and not exaggerating here, I have used it basically EVERY day. Ehh except maybe while I was down for a week with the Rona'

@worldsstrongestblacksmith Жыл бұрын

There's a guy building a mobile machine shop in the town i live in. The owner turned a old school bus into a machine shop he has a added milling machine , a band saw , a lathe , a small forge , anvil post vice , a hydraulic press, belt sander , material storage. He beefed up the suspension , added a hydraulic leveling system and put electric phase shifters on all the machines turned it into a hybrid and put solar panels on the roof along with a tesla batterie pack he's ab,out 70% of the way done and has about 250,000 in it so far he has plans to add a collapsible car lift on the back of it along with a engine hoist

@PiotrFoxWysocki Жыл бұрын

"The Tools I Always Have With Me" in your case will be every possible tool that has been ever made :D

@duffweld Жыл бұрын

Gerber tool. 400 always with me.

@rotwang2000 Жыл бұрын

I usually have a Leatherman on me, there is a Swiss Card in my wallet, got a P51 and ferro rod on my keyring.

@davidgoldberg2001 Жыл бұрын

Great video as always! BTW, according to the official Knipex channel, the K is not silent. The correct pronunciation is "Kuh-Nip-X". Go figure!

@michaelpipkin9942 Жыл бұрын

I would love to plug a wire in Adams temple and watch his thoughts in real time. I assume it sounds like the Stargate tracking device (the scene where the drone travels across the universe).

@marksnyder2232 Жыл бұрын

The thing I dislike about the newer, rubber-lined handles is that the rubber breaks down after a few years, and get tacky, expanded, or otherwise stop working well. It's not just on shop tools, either. I'm probably going to have to replace the rubber on my best BBQ/kitchen tongs over the winter, probably with some cherry I salvaged from tree trimmings at a family member's home.

@SocksAndPuppets 6 ай бұрын

I don't have a workshop, my craft is drawing, and I'm not very handy, so I don't really need any tools - but I have a leatherman that I've carried for a decade, and that solves *most* problems that I encounter. The small flathead is snapped off, I don't remember how it happens. I'm told leatherman will replace it, but that their new stuff is cheaply made and not as good, so I shouldn't send it to them for a replacement.

@sween187 Жыл бұрын

Get yourself a label printer that takes shrink tubing for wiring, will make life much easier for wiring

@redacted6022 Жыл бұрын

As a young maker I seem to turn every project into a weeks long ordeal which could be done in 2 or 3 days what’s a tip for completing things in a timely manor?

@robertk7484 Жыл бұрын

I am never without my p38 can opener to open boxes, it's a flathead, and it opens cans quite well,

@WalnutandSteel Жыл бұрын

I always have at least one leatherman usually two on my belt. Never leave home without it?

@webmonkees Жыл бұрын

One problem I had at the hospice was improving it with what things I had on hand.. later realizing I was reverting back to jobsite.. oh this fixture is wrong. . ..and restoringTrunk O' Tinker. Enough to repair a iFixUBroke store. Not sure how the manager there took my bragging that in the job interview.

@yobgodababua1862 Жыл бұрын

I used to always carry a good pocketknife everywhere, but post-911 I ended up losing too many to security because I'd forgotten it was there and was no longer allowed... so now I'm sadly toolless most of the time.