Shout out to RollXO for sponsoring the video! - rllxo.com/luxifer

“Thinking I might take it around the corner and open it up on the road” cuts to him mashin at 35kmh like a Dyson vacuum

"Does a supercharger from Wish actually work?" 'Sammit leaves the room quietly'.

When it blows up it needs a 13b rotary

The scene where they are welding the diff and play with fire is the most Australian thing I've seen all year.

roughly 16% HP loss

The oil capacity is max 100ml. Recommended volume from seller to seller ranges from 40ml to 100ml. DO NOT use 85 weight gear oil as the sellers all suggest. You will be sorry! Use proper Supercharger Oil, and again get that CPU cooler rig set up on the body of the supercharger. YOU MUST cool the body or it will die in very short order when it overheats! Also 15k is the max between internal oil changes!

I lost it when that supercharger came to life for the first time and the expression on your face, that has me in tears 😂😂

I made a post about the need to cool the body of the supercharger and I guess because I added a link to a YT video that showed the tactic I described my post was removed The fins are actually a coated polymer. The problem is that nobody pays attention to the temp on the supercharger and it overheats, melts the coating off of the vanes and thats it, you're done. The sellers all recommend 85 weight oil to cool and that is total bollocks. You need to put the correct Supercharger/Forced Induction oil in the thing. You also need to add cooling to the body of the supercharger and the best tactic I have seen and used myself is a liquid CPU cooler with additional heatsinks added to the heat exchanger when you mount it to the body of the supercharger. If you do not cool the supercharger it will grenade every time without fail. You have to remember that despite what any of the sellers claim these are not new, they are remanufactured and my belief is that whomever distributed the spec for remanufacturing these blew it on one of the clearances in the bearings/vanes/etc and thats why the constant overheating issue! There are also too many people trying to run 85 weight oil to cool it and that just won't cut it!

I’ll be honest I so miss Dennis and Ian the OGs! Put a Warspeed 4 cylinder in it.. if you know you know🤪

I heard that the original plans to power the jet car was a ryobi 36V blower but were scrapped due to flight risk

There is a company here in the US that makes a secondary injector controller and it's name is "Split Second". I used one of their double injector controllers with two threaded injectors, yes they have 5/8" thread's on the injectors.

u know is a good vid when hear "marketplace"

Shooting those little flames had me dying 😂😂😂

👋 from North Carolina in The USA

38:22 cracked me up 🤣

Should put a hayabusa in it. Give it an engine from its home.

Great video and one of the funniest videos I've seen this year 😂👍😀... And what a great car to work on , this makes a nice difference from all of the same brands and models in other videos Please keep on making more of these great projects and videos.

Holy shit I love this kind of content, just 40 solid minutes of taking the piss and looking at a funny nugget car, so good

Nods to this channel blowing UP!

Sammit already did this on his kei car in Japan, they are so loud and the plastic fins deteriorate very quickly, the original real versions of these superchargers (non-temu shite) cost half the price and are actually on the Subaru Pleo, so if you want a real one that will not feed the engine full of plastic debris, then the Subaru Pleo supercharger is the one you want, it is exactly the same except it has metal internals instead of the temu plastic ones, they are a AMR-500 Supercharger and only cost like $50 odd for a proper one, the only thing that saved Sammit's Kei car from killing itself, was the intercooler caught all the plastic debris and stopped the engine from breathing it in, mad little rig though, a blown V4 or V6 would look killer in the tray and would be very unique, doubt it would fit under the seat, LOL

4:14 - Reminds me of the old Top Gear episodes where Clarkson is sitting in the smallest car ever 😂 Barely fit!!

I didn't know Thor was a mechanic 😂 love this content

It requires a rising rate fuel pressure regulator, and a fuel pump capable of more pressure that the boost by 4-7psi. Or connect the carb to the supercharger and supercharger to the Manifold

Awsome seeing you following your dreams.

Yo your back mate nice to see you back in Australia

Welcome to America brother!! 😂😂 0:06

Good going,its the fun of making it happen,its constructive and living a good life,respect.

These little cars are so cool. Also wait, you're Aussie! Subscribed!

I love the dennis feature. man of many words and not many all at the same time haha

this is the first video i've seen from your channel, but my god the god damn batmobile looking ass at 6:25 cracked me up, i'll have to track down stuff on that after this

What a pretty wee lorry ! ;-)))

The bee hive is open port to the exhaust manifold to heat up the air an warm up the car quicker the waves is closed 👌

Great show ✌️

And love it man 🎉

The air box slider thing is a heat rider from the exhaust to warm the "truck" up quicker in the cold months... then it can be disabled for warm weather.

22:00 i cracked up 😂😂😂

0:34 Oh yeah? The ol' choke-n-stroke? The ol' yank-n-spank? 😂

😂🔥 this is epic!

I really enjoyed this video

Great new project

Sammit tested the temu supercharger on his kei car it was so loud it ended up breaking n the fins inside are crappy plastic

This Vid was my first look at your channel and was also the one that made me go ahead and give you a Sub!!!

Why didn't you just use Google translate image thingo on the air filter housing? Works like magic

When it's done u and moog (mcm) should do some challenges would love to watch that

It's been 5 days Brocephus!!! Where TF is the vid of the test laps??? I'm dying to see this lil MoFo Run Laps!!! Lmao 🤣🤣🤣!!! We Gotta Have It Son!!! 😁😁😁

Ahh so you decided on the truck first 👍🏻

the front end reminds me of brum from the old kids show 🤣 looks hectic

All the yarns good laughs

"It's the predecessor to the 9in" What the 2in? 🤣🤣

i didnt expect to see such serious drivetrain lol

I like the humour in this. Take the bung out of the bung hole, then probe the bung hole with the probe.

26:20 mate i think u should take a big swig of that monster before u go ahead or you might end up breeding the brakes 😂😂

You're sort of right, the Ryobi's are used to twist the rubber bands that are attached to the prop shafts on the cruise ships 👍🏻

A "Rattle Gun" in America, or well, around where I live in America is a Can of Spray Paint. Lol 😆😆😆

That little truck. Is the definition if you look FAST YOU LOOK FAST

did you change the oil in the super charger as it would only come with transport oil in it

not my dad being the guy in the buick😂

I think the beehive is summer does it have horizontal lies with a flat top?

Why are the shonky projects always the best 😅 What a little weapon 🔰

i reckon i saw that rig for sale in Dayboro last year..coolest car in the main drag i reckoned..

The wheel/tyre combo on the front also serves as a "bumper" protection in case if a frontal impact. In a car that small its a considerable weight reduction.

The worst thing about being bitten by a poisonous spider: you're probably Australian.

That had something on hoonigan today with twin Hyabusa engines super sweet

Now ya need to push nos 😂

baby Luxifer.

I believe that switch has to do with temp differences in winter/summer, one side is to stop your coolant from freezing? I cannot remember.

MCM does a Daihatsu Midget And now we get to see your vision for it :D

You are such an Ozzie bogan. Soooo glad you represented us bogans and showed America how it’s done over here in the land of the best burnouts!!!

This was the first car I used to buy on gran turismo 2 on PS1, good old days hahaha

You need to ship that to the states to the Wesley compound I'm sure he would drop LS into it or something😂

You probably should pully swap it. If you only want a max of 5-10 it's running twice as fast as you need and it seems like your just blowing off lots of power

I died at 31:00 lmao

i might buy one of these, I hope they don't all become destroyed now lol

Using coolant temperature instead of an EGT gauge to help figure out if it's running lean 😂.....gonna have to see how this ends up. Subscribed

Im all for science❤

legend i had a good laugh

you are better off running that kind of boost through a polaris RZR 3 cylinder engine. but before you do. take apart the old engine and gap the rings but also check everything else before you go full send. as soon as i saw the supercharger light up and take off i was like "holy shit this tiny truck is gonna be a riot"

This gives Gran Turismo 2 vibes... with the same truck 😂

That’s a cute little rippa

Curly wirly and chomp bar. Ozzie favs for sure

Can't wait to see a Hyabusa engine in this

Carbys don't like being boosted, they work better when air is pulled through rather than pushed through. If the carb is after the blower then I wouldn't be surprised if it's going lean

RWHP does NOT equal engine HP, which is commonly measured without any fan belts connected, directly connected via the flywheel. That this thing has 25RWHP after 28 years is amazing!

I for one would love to see this when it is its final form go up againt MCM's turbo midget

Hahaha , Silverados ,# Bogged on Fraser !! , landcruiser 2 the rescue that day Kyle, lol, love the vods Boss !!

I was in PNG in 2000 , watching a national mechanic work on an Toyota kijang Ute. He was sure that the people that made this car must have been very small to be able to build it.

The Bee Hive is Summer 🐝

13:00 YESSSSS !!!!, i couldnt agree more, i paid $700 for my 94 NJ Poojero (3ltr V6 petty Pajero, yes, i am a wanker 🤣🤣) and it has armrests on the front seats, side and middle armrests in the backseat with cup holders in them armrests, 2 cup holders in the front too, has cruise control, central locking, electric windows, did have air con, but i ripped it out, dont need it, the window is my air con, lol....but not only that, but it goes more places than a Landcruiser, mine has out performed lifted rigs on 35's on more than 1 occasion......she has copped 8yrs of abuse from me as well as towing and snatching other 4by's out of bogs, but she has done over half a million kilometres and she's still full of pep (Pajero in Spanish means Wanker, hence why American Pajero's are called Montero's instead 🤣🤣 )

12:07 - Dude, one of those paint matched fifth wheel covers you’d see on an old Cadillac or something would be sick. Idk how that’d work with a big tire though probably cover half of both headlights 😂

you will have to have a competition with Mighty Car Mods and their midget.

Look at that. I spotted a HT holden up on the Hoist.

The beehive on legs one is the symbol for summer.

Are 1/4 drive impacts not a thing in Australia??

So... when does the Hayabusa swap happen... 😈😈😈😈

You should test $100 tripod for your camera. As much as I wanted to see the video, I had to quit at 1: 33 , could not stand the constant changes in the zoom angle.

Them ryobi tools work fine

Need to buy an aldi drill press next time they have them

"there might be rods and pistons rolling down the road"....more like rods and pistons going straight up your corn chute!

well mate here is the real big question ford or holden and if i bought a car to do up into a burnout car would you help me build it or just teach me and show me what to do