Thanks to Burnout Masters for sponsoring the video! Who’s got Luxifer? Get it here burnoutmasters.io

This is my " Daihatsu short person " gold hahaha😂😂

I was fortunate to be a shop rat at a taxi cab company. The mechanic was trained by the military to fix anything that broke on an all burning engine. All burning means every type of fuel from jet fuel, and AVgas to vegetable oil and methanol. Back in 1986, we didn't have the internet. My brother taught me to use separate sandwich bags for parts. Dan, the mechanic, taught me to lay everything out in order of removal and to clean everything before reassembling whatever we were repairing. It helped that I had a sort of eidetic memory, and I could replay events in my mind. It is a gift and a curse because emotions are connected to memories, and some memories can cause ptsd. ❤

weld a radiator cap neck to the boost pipe, run a 15psi cap ahahaha

KZfaq, put Westen Champlin on a plane, get him to Aussie land, would love to see you two do a series of 'dingbat burnout builds'.....imagine building a Aussie burnout car for Westen.....😂 Kyle you have the gift of the gab.....here's an idea Austin 1800 burnout car.....😉

That on methanol sounds like a super charged vacuum 😂😂😂😂

A top draught carb turned into a sidedraught 👌 Suprised it even ran. Needs a couple of rotors

And when this part is done... Busa swap it. 👀

Ive been watching for some time now, i thought the jet car was insane but this thing is the pinnacle of human evolution

You've mastered the art of dribbling shit and making it sound interesting 🤣 keep doing what your doing mate, it's gold🍻

Methanol eats plastic. I thought when he said 3d printed blades he meant metal ones 😂😂

Kyle, to answer your question, i love this type of content. This particular project is what made me hit the subscribe button. Please bring the midget to Powercruise 96

Hell yeah man! So glad to see that you’re coming out with longer videos and more content. Absolutely love this shit and please keep em comin’!

Heat kills everything Methanol - hold my beer

I just wing it with what goes back where. A little bit of common sense a little experience and a lot of "yea that looks right" thanks to a photographic memory. It works about 90% of the time 😂

The first engine I pulled I labelled everything I took off. Now I just say I'll remember and get pissed when I forget 😂

That's the finest adapter plate that ever was built lol😂😂

FF stands for Factory Freedom

This is the stuff I wish Donut got into instead of whatever they’re doing rn

34:05 - I’ll be honest with you, at 33 growing a KZfaq channel, you’re very inspiring to more than just the young version of yourself 🎉 It makes me feel like there’s still time to figure my own ish out lol

Building stuff like this is because you have been hanging around Cleetus and Westin too much. I love it!! Keep up the cool and funny videos.

SOLD getting the game right now lmao

Just found the channel the other day and been waitin for this video

Damn, you guys handling methanol without gloves and using it as fuel in a car that might expose you to methanol fumes or leaks ... Sure, it won't k1ll you right away, but it might cost you your eye sight when you play with it regularly like in this video ... Take care 💖

Hilarious you are young Man! So frikin funny i love the banter and the one liners, so f in thrilled you are posting videos of your shenanigans, love your humor I laugh at loud, you have this naturally dialed in keep doing it, you do you always!!! More and more success will follow I promise you! You're on a Roll!!! God Speed! 🙌

This is awesome definitely want more content like this

I have found that if you don't unplug the hoses they are usually pretty easy to put back together

Tape and a marker or small color matching zip ties. And ziplocks how I keep track of everything. Whole shop. Dude working on a trailer tool box😂😂😂

Daihatsu was purchased by Toyota in 2016.. This is the 2024 Mini Luxifer nobody expected they needed

Quality content man, love it

More crazy builds please, you're the only entertaining person doing them lol

Putting things in things that do go into things is the best way to do things. Keep doing those things for i enjoy these things

absolutely love these off the walls builds!!!!!

On my phone your video title was " testing temu supercharger and meth" and I was like now that sounds like a video for me lol

I love to look at this type of builds

I've just found my new favourite channel, I've gone without sleep for the last two days, and the KZfaq rabbit hole has spat me out here! 😂😂😂 Loving the channel so far!

i do love the whacky builds like this car and the jet car

Multi color cable ties, just match the colors back up when reassembling. Can’t get simpler 🤙🏻

I'm here for the piston going out the side of the shed :D

Luving this content brass 😂 you should show cleetus how to build an under water car that actually works

As far as marking things as you pull them apart I would go with the numbering system I like to use Roman numerals to confuse any anyone else who chooses to work on my sh$t hahaha 😂😂

I reckon do more of these videos really enjoyed it and the supercharger on methanal sounds like a off nut vacuum cleaner

I love this video mate, made me find your channel and now I'm a subscriber since I really want to see how far you can push this midget! 😂

Cheese an rice that was nice 😂😂😂😂

DO MORE OF THESE VIDEOS!!!!!! These are epic and watching you do it, so I don't have to. Yes! Lmao. Hell yeah man

Good onya and cheers. That was entertaining. I'm looking forward to watching more of your vids.

All you need to do is get a fuel pressure regulator that has a boost reference on it and that way it will increase your fuel pressure as boost goes up stopping it from blowing the fuel out of the carburetor because once the boost overcomes the fuel pressure it just starts blowing the fuel either back the line which it really can't because of the needle and seat so it ends up blowing it out the vents and down into the motor causing it to run extremely rich until fuel runs out so the simplest way because it doesn't seem like you're 100% competent of doing that system where you put the carburetor on top of the blower it's so much easier to just put a fuel pressure regulator inline that has a boost reference input on it literally you put the regulator inline you run the line to a boost reference and you're done well adjust it then you're done

Yeah the builds are mad and you compliment it so well with your champagne comedy

I love these types of videos/projects

This guy deserves more subscribers! Amazing content

im gonna supercharge my 420cc on my diy offroad crosskart dealy so keep up the good work its 2:00 am and i gots some welding to do awesome stuff 2 thumbs up

This is awesome! If you like these you might have fun with one of those rear engine 4x4 mini trucks or a tuktuk.

The only reason I'm watching this is so you do t have too 😂😂

Loved the build

8:40 get those fancy packs of different colored zipties and you put the same colored ziptie on the hose or wire and socket/connector. and then other color for the next set. works pretty well. or just use tape i guess, point is, label both ends.

This shit might have been the funniest auto content I have watched 😂 Forsure got my sub

Cool content. Some dint like you explaining but cutting up your camera guy was hilarious.

Loving this series!

That thing sounds like the Ecto-1 on an acid trip.

Different coloured cable ties are handy Kyle

Go for it this build has been great

I like this build. Stumbled across it😊

your funny to watch and so manny tips for next time. 😂😂

I love this build!!! completely out of the ordinary and you have an awesome dry sense of humour! 🤪 oh and You're an Aussie, we are definitely lacking in the content department for Aussies so thankyou for sharing. You rock.

Sounds like a nitro engine in my rc running lean, stretching conrods

Y'know? You dont drill carb jets out, you can buy kits that have a selection of different sized replacement sets, and they unscrew so you can experiment with no permanent fuck-ups.

my buddys 93 ford taurus still has markings on everyithing so i could keep track of where everything went when i did the head gaskets i used yellow industrial paint marker shit aint coming off

Definitely need more stuff like this ... not only are you enjoying and having fun , but personally, I love it as well ... sketchy is best .. I daily a 400hp 1991 miata .. sketchy is my name, and fun is my game 😅... mad props brotha .. peace and love all, keep it rad, stay safe, and build on.. l8r

Nowdays I take photos, used to put numbers on both hose and nipple as well as connectors and cables. Such as 1 1, 2 2 etc

Your track map is in the wrong direction 🤣

I absolutely love the content .What a good video lol I would like to add ,I don't believe that carburetors don't work very side-ways . 👍

Love the odd car videos it's fun to see what happens

Kyle when are you racing the boys at MCM!?

Lovin the dodgy builds brother.

Wicked build We need of them it hard me Laughing the whole time

How about a Suzuki MIghty Boy with a metal mountain out of the bonnet next ?😁

Well it’s always work for me when I had no idea what I was working on is Get Color zip ties blue goes to blue red goes to red and when you run out of the colour code then you match them

Cant wait for part 3

You should have did nitromethane it's way better than methanol

Tell burnout masters to do an update already 1 all the pads need the scoring corrected 2 we need bigger garages 3 wet weather option 4 brake bias option. I'm also lvl 180 so I get bored abit 😂

Incroyably funny and instructing. 😅

That little thing is awesome. If it is able to still live, you can always work with someone and make it into a rock crawling machine.

Luxifer is just to clean. This Midget build is my kind of fun.

U should put a quilt motor in it and see justhow sketchy u can make the lil fella be lol hahahahahah

Ive actually been playing burnout masters for like a month now. Its definitely a cool little game i just wish all of the tracks and cars were unlockable with in game money and not have to pay 3 or 5 bucks for them

Sounds like a a drill on its way out lol

That gear spacing reminds me of the stock gearbox that was in my 93 Civic CX, absolutely garbage (which is where my stock gearbox went when I upgraded to a DX transmission)

I just want milk that tastes like real milk 😂👌🏼

You could have just went with a two barrel carb lol😂

Give you some credit bro! You can drive, even the tiny shit boxes. Fault finding and hackery is what I signed up for! Fun and games mate!

Your animated map progress was backwards lmao

Love the Midget

Methanol?!!!!!! This is gonna be nuts lol 😂

I couldnt help but notice the lap progress indicator went the opposite way to the direction that you went around the track 😅

Subbed after you were on Cletus and westen Champlain videos

Honestly. One of these things with a Honda single cam would be sweet. And it would rip 😂

Keep Lil trays for all your stuff your working on

Different color zip ties. Blue goes to blue, ect... and labeled zip lock bags for bolts

Colored zip ties and matching numbers on each side of the break 1 yellow goes to 1 yellow 3 blue goes to 3 blue and so on and so forth and if you get to more than what colors you have then go to red/blue 1 goes to red/blue 1 or green/black i typically use red green and black for electrical and yellow blue pink and purple for fluids i suppose colored stickers would work as well

I am of the opinion when you're doing a draw through set up like that you almost never need to increase jet size because the increased drawer pulls more fuel automatically through the same size jet but when switching fuel to methanol you obviously have to do something for extra fuel