Hi guys! Remember to share your feedback down here in the comments and give a like to the ones you agree with! That way we can check what you guys like and what you'd want to see next!

You had me at the click and I stayed for the foam! Every adjustment knob or turn dial should have a click. It would be an honor to break that bottle. 🤣 Seems real good would like to see the balance empty as well as when stored most foam cannons are empty. Don’t want them falling off the shelf and breaking. I do like the balance with the gun attached as well. Would like to see the suction tube flexibility and if the weighted ball is the right length.

I really admire and respect how Active listens to their customers/potential customers and designs their products with the feedback they are getting. And changing current designs quickly from user feedback post launch. Very commendable!

I dont know where Ive been but I just saw this after seeing the new accessory kit video! Everything is looking great and I appreciate the transparency throughout the whole process of bringing this to market!

+1 to the additional bottles so we can swap soap types quickly. Something that could set you apart would be a quick disconnect rom the bottle to cannon so we don't have to worry about threads failing eventually. I'd pay a premium price for that. Overall, it looks like it performs well and similar to the competition. Since this is an all stainless build I think your real competition is Griots garage since their is all stainless as well. Would love see a comparison there.

Amazing products.

When is the accessory upgrade kit going to become available? Would be good to have an estimated release date.

Can't Wait for release of the foam cannon.

Looks great! The only thing it needs is the quick connect adapter like the MJJC.

Foam quality looks great. Would have been nice to get an idea of consumption of the mix between the MTM, MJJC and the Active. If you can produce the good foam and not use a ton of product to do so then ultimately the Active cannon becomes cheaper than the others when factoring cost of the unit plus chemical use and draw rates. The gun with NEWLY IMPROVED MECHANISM……. Looking forward to that for maybe even an easier pull and remove the detent and shorten the pull length even.

I still think a rubberized boot or coating for the bottom is ideal. Has to be a way to add this … maybe a spray coating? Or maybe we’ll just have to add this after we buy it. Haha, either way, I’m excited to try this. 👍🏼

Awesomeness! I’d say release it!!

Definitely a solid offering and awesome that you are responding to feedback and engaging users and prospective buyers.

Great news, great work

an ETA on shipping date would be most appreciated

Looking good. Can’t wait to get my hands on one. 👍🏽

Great job! Thanks Casey, you are the best!

Looks incredible. Balance is key. Clicks are great. Would love to do testing with my Active and Karcher setups as well!

Can't Wait !!

Oh Hell Yeah! Looks, sounds, and performs great too. Thanks for the update(s).

Exciting times!

I definitley need to try one in my shop. I'm getting ready to launch our KZfaq channel maybe once its out this can be my first review. So far it looks like it will be amazing. Thanks for all of your hard work to bring such amazing products to the detail industry. Have a wonderful day.

Can’t wait to buy ANOTHER foam cannon😅

Easily going to be the new best foam cannon on the market. Any promo code for 2.3 buyers would be awesome!

Love the video! I laughed a few times. You were very funny.

Really do like the structure of this foam cannon. I'd like mine to have the gray ring around the output as everything for me is black gray or red, lol 😆.... i really like that you guys pay attention to your customers. That's key

Looking forward to adding this to my Simonez 1800 pressure washer. Keep up the good work.

I'd love to test one of these. It would take a very good foam cannon to replace my MJJC Pro2

Good job guys....synergy has been obtained...

Good job keep up the good work. Al,NJ Activec2.0 owner, I love it's size and performance.

That was Awesome. I really Liked your "let's go"... hey, atleast you did it... "LETS GOOOO!" Yer welcome sir! Hey, L👀KS great! I will definitely pick one up for sure. On the 3 way side by side by side, the active performed very well. As for the drop test, while important to a point, I blame Keav😂. The balance was more interesting to me! All In all, I believe this will sell very well! Congratulations active, well done!

I appreciate the update. Can't wait for the release. A couple questions. Is the 50ft hose of similar quality/flexiblity as the hose that ships with the 2.0? Is the short gun trigger upgrade going to be available for anyone that already purchased the current model? Does the smaller 1.25 orifice cause a higher amp draw on the 2.0? Thanks again for the road map. Great job, Active!

Was there a way to monitor spray spread in the comparisons? 2.0 seemed to show the spray pattern much narrower than the MJJC, etc.

I would love to help test out if needed. I am always looking for the best washing products and find Active to be the best bang for the buck in the industry.

I Need the kit. It looks amazing. Great looking design. Take my money. But give me a discount cuz I own an active 2.0. Then take my money. Thanks!

This video format and editing are solid imo, and JC seems more comfortable and lively here. 1:21 With the fan width adjustment, I hope that once you rotate it to the desired width, it will stay there relatively well. My PF22 is great but the fan width doesn't really lock into place and doesn't have the friction/resistance to really stay at the desired adjustment compared to my Griots Boss. My Griots Boss has an issue where there is a small jet of the mixture that shoots out above and below the desired fan which just wastes product on the ground sometimes. I'm looking forward to this Active unit replacing both of those since I have a few issues with both.

Looking good; can't wait for it to be available! One thing I'd like to see, and I don't know if this is possible this far along in prototyping, is if it's possible to have the measurement marking highlighted in some way. For example, if you're doing a darker color could the markings be white in order to stand out? Every foam cannon I've used it's been really difficult to read the markings because they are the same color as the bottle itself, so everything blends in and you really have to struggle to read them. If there was some way you could contrast the markings with the bottle color so that they're easy to read, that would be great.

Lol, we'll wait because this is our only one

I want one

The last sample bottle had Active in yellow lettering. Could you possibly use that same color and “emboss”/cover all the capacity marking to make them much easier to read when adding liquid?

Let me be a tester as well!?!?!

when’s the release date??? i need it

I'll have to wait for other distributors to try and get one. After years of asking for shipping to Hawaii to become available, it never happened. Nothing I try to order directly from the active site says it can to ship to Hawaii; always says it cannot ship to me.

Ballpark estimate on when the kit will be available? I’m holding off on ordering a 2.0 until then!

Will there be a 2.3 bundle with the new accessory package? The standard accessories just don’t seam to fit a high end washer

Will a 1.1 orifice work in the gun for those of us with a basic pressure washer unit?

I literally just ordered your Short Gun from a supplier here in Canada about 2 hours ago (Pro Detailing in Mississauga). Are you saying the mechanism in that gun has an update (I assume to fix an issue) that will not be included in the item I will be receiving? Will there be a retrofit available to update my unit under warranty or should I just cancel my order and wait for the fix to be released? Cheers Kevin (Caledon, ON)

Do we have an estimated time of launch?

I couldn’t help but notice that your online store only offers payment in US dollars. Is it possible to charge your Canadian customers in Canadian dollars so,as to avoid the exchange fees we have to pay? (Since you are a Canadian company).

Estou no Brazil e gostaria de adquirir esse produto . Como faço?

This is a company that does their R&D. MTM should learn from you and not leave it to their customers.