No video
Testing Diamond-Coated Routerbits + Giveaway & Free Spreadsheet
Рет қаралды 61,572
Күн бұрын*Support me here: www.patreon.co...
or support me through my Amazon wishlist: amzn.to/2QoQbhw
Follow me on Instagram: / marius.hornberger
For some time now, I had a surfacing bit with carbide inserts and an 8mm shaft, which is a common standard size for router bits in the EU. I quite like it, and the manufacturer of it is Fraiser. So I had a look at their website and found some other bits for the CNC router that seemed to be very promising. And they also have an affiliate program. So I contacted them and asked for a few router bits. And in exchange for this video, they sent them to me. So yes, this was a sponsored video. Instead of a project, I first wanted to push the bits and my CNC machine to the limit. Also, I wanted to have cutting data that were made on my machine. For the future, that means I never have to guess what cut settings I need to use. I can just look them up. And that's what I did in this video.
Thanks again to Fraiser for supporting this video and making the giveaway possible.
Download link for my Excel spreadsheet with cutting data:
1drv.ms/x/s!Av...
you can download it, or you can also directly use online
Link to the test program: 1drv.ms/u/s!Av...
Affiliate links for the router bits:
German links:
*Hobelfräser mit Wendeplatten: www.fraisertoo...
*Spiralnutfräser positive Schneide: www.fraisertoo...
*Spiralnutfräser negative Schneide: www.fraisertoo...
*Spiralnutfräser wechselseitig (Kompression/ Nesting): www.fraisertoo...
*Spiralnut-Schruppfräser: www.fraisertoo...
*Konischer Spiralkugelfräser: www.fraisertoo...
*Spiralkugelfräser: www.fraisertoo...
*Fräser Set: www.fraisertoo...
English links:
*Spoilboard Surfacing Cutter: www.fraisertoo...
*Spiral Upcut bits: www.fraisertoo...
*Spiral Downcut bits: www.fraisertoo...
*Compression/ Nesting bits: www.fraisertoo...
*Spiral Upcut roughing bits (with chip breaker): www.fraisertoo...
*Conical Spiral Upcut ballnose bits: www.fraisertoo...
*Spiral Upcut ball nose bits: www.fraisertoo...
*Bit set: www.fraisertoo...
Second giveaway hint: What is your project that you want to use the router bit for?
Enjoy the video!
@MariusHornberger 3 жыл бұрын
The giveaway is over. I've randomly picked three winners. The winners are: Fran Maric, Michael Benthack and Lap Joint. I've replied to your comments.
@Zaptastic 3 жыл бұрын
#Fraiser Great video, these bits would work great in my router table for box joints, thanks for the spreadsheet. That looks like a lot of work, very much appreciated.
@tommysts1920 3 жыл бұрын
Fraiser bits, nice German name, like mine last 2 letters ending in "er" If I had a CNC machine I would use them to duplicate small projects to give away to friends and family :-) But, they would work great with my router table too! Love all your videos, and your English is wonderful! I wish my German was as good as your English!
@phrozenwun 3 жыл бұрын
Not commenting for the give away, just because your content deserves to be bumped up by the YT algorithm. Thanks!
@huskyrider360 3 жыл бұрын
This was a ton of work and I thank you so much, that you did this and provide the data for us!!! I think I will try the router bits for one of the next projects.
@MrCurstesy 3 жыл бұрын
Does anyone else wish they were as focused as Marius? Every video I see of him gives me a little personality crisis...
@OtherThanIntendedPurpose 3 жыл бұрын
very good comparative analysis on speed and material consumption. thank you. these are really cool bits. and the cuts looked great.
@neygart1929 3 жыл бұрын
Ich wünschte ich hätte Platz für eine CNC Maschine. So bleibt mir nur danke zu sagen für deine unglaublich ausführlichen Videos und dir ein gutes und gesundes Jahr 2021 zu wünschen.
@theteenageengineer Ай бұрын
It’s interesting that they make solid carbide diamond coated bits for routers. Usually machinists use solid carbide endmills because you can run them 2 to 4 times faster than you can for high speed steel. They are also the best thing to use if you have to cut something hardened. The only issue with carbide is that you can actually run them too slow, and any slight variations in feed rate or sudden movements means chipping the teeth right off. Because they are solid carbide you can probably get away with 10,000RPM 2500mm per minute for soft wood, and 7,500RPM 1900mm per minute for hard woods.
@peirob 3 жыл бұрын
You convinced me, I'll seriously consider to get a few of them :-)
@brianknowles7130 3 жыл бұрын
Good to have you back. You've been sorely missed . ! We need your ideas and humour. Thks
@drewgraham7877 3 жыл бұрын
Great video! Enjoyed all of the data review as well. I always look forward to your videos as they have lots of amazing information. Best of luck on the give-a-way!
@fredrikpalm2739 3 жыл бұрын
Thanks for great videos! I have the fraiser flattening bit, and really likes it. Now I can use your cutting data to improve the speed of my cutting I would have use for the spiral bits for my bass guitar builds.
@sarahtompkins24 3 жыл бұрын
I do not have a CNC machine but I would never skip through one of your videos. They are full of information for future use and entertainment.. keep it up please.
@gizmobowen 3 жыл бұрын
Amazing video Marius! I can't imagine how much time and effort you put into collecting all that data. I have an MPCNC that I'm still struggling with determining speeds and feeds. My 500W spindle definitely has less power than your machine and the stiffness is orders of magnitude less so I am really limited. I'd love to have a small diameter #Frasier bit for continuing on my journey but I don't know what I could make with it. Thank you for all your hard work and this give away. I like all your videos and really enjoy the ones that include your CNC router.
@poptartmcjelly7054 3 жыл бұрын
Makes sense that the high RPM low feedrate generates more power consumption, because for the same amount of material removed the cutter has to make many more cuts. And breaking up molecular bonds between the fibers of the wood is alot harder than throwing the resulting chips off to the side. Also small chips don't clear as efficiently.
@romaniguitar 3 жыл бұрын
Thanks so much for the data, Marius, I really appreciate the effort.
@CraigConnors 3 жыл бұрын
The 8mm roughing bit is fantastic, I don't have any bits that don't chatter. I did add two liner rails to my CNC Shark, which uses two polished steel rods, I couldn't believe how much flex they had in just a 900mm length rod. It had roughly 5mm of up and down play at the bit and could not be used for anything requiring detail, but not anymore, virtually no play at the bit now.
@jasonshrieves4467 3 жыл бұрын
Wow, talk about money well spent for the bit manufacturer to give you bits and get such great data! I'm definitely going to get some when my stock of bits is depleted... but my CNC spindle only has a ER11 collet so only up to a 6mm shaft diameter bit. Thanks again for the info and inspiration!
@sdspivey 3 жыл бұрын
Good, now I have a chart for when I come sneak in to use your CNC while you're not home.
@rasmuskurten8455 3 жыл бұрын
Thank you Marius for a very interesting and comprehensive video! Your time is precious, but oh boy do we appreciate it!
@MichielvanderMeulen 3 жыл бұрын
For the spindle stiffness I would not look into the mounting, that looks perfectly fine, but in the bearing arrangement. In the 3D model AMB provides, you can see the bearings probably are a set of 6002 type ball bearings, held in place with a circlip on the outside. For the inside I guess the two bearings are compressed with the motor shaft, presumably from the far side. This bearing arrangement has it's limits in precision (play). Angular contact bearings would be great, and they are even available in the same size: search for B7002-C-T-P4S. The trick with angular contact bearings is they come in sets, that pair to have a certain preload. There's a lot to find out if it could work in this situation, but I'm sure it would be a great improvement to the standard 6 euro bearings. Let me know, would be interesting to help. There's another way to improve bearing play and stiffness: shimming. I would suggest to shim in between the inner rings of the two 6002 bearings. Probably a few hundredths of a millimeter is needed. There are shim rings available, or you could cut them from thin sheet metal foil.
@saftbrain 3 жыл бұрын
I don't have a CNC so I am not entering for the giveaway but I am thoroughly impressed by all the work that went into this video and I also appreciate all your other videos, Marius! So I am leaving a comment because I feel a thumbs up is just not enough!
@daily8150 2 жыл бұрын
The blue screen of death gave me a good laugh.
@johnagorman 3 жыл бұрын
Thank you so much. I recently bought a cnc router and similar coated Amana bit. I wonder how they compare. Plus, I just got one. A variety would be fantastic. One of the markets I want to enter is accessibility, making things easier for folks that have disabilities. I'll start with things to assist both student and therapists in schools and homes. Then I'm also looking at the bike market. They are so very popular at the moment. I can several things to make. If successful, then i could upgrade to a beefier cnc router, lol. Thanks for the great info - cheers
@gsp911 3 жыл бұрын
Frasier could not ask for a better tester. Thumbs up, quality content as always.
@daskasspatzle2396 3 жыл бұрын
Besides the random blue screen, i think that amazon boxes and "Pril" flowers together join different time periods and therefore are the foundation of a new style of art ;-) Thanks for sharing your work :-) Cheers from BG
@JerkerMontelius 3 жыл бұрын
It should be possible to construct a chatter detection sensor by measuring the vibrations in the cutting head by some kind of heavy duty microphone. This would have the additional bonus to to be able to detect if the router bit has broken.
@michaeljameson1046 3 жыл бұрын
Very comprehensive video I have my first CNC on order an axiom AR8 gunner need bits cheers thanks for your efforts.
@vedranlatin1386 3 жыл бұрын
You made something really useful for many people, kudos to you As for 6mm vs 8mm I found the same thing when milling metal on my small-ish mill. For deep cuts, you should use the smallest endmill you can get away with in regard to deflection. My mill will do steel with 4mm and 6mm, 8mm is seriously pushing it and 10mm is completely unusable. I optimistically bought 50mm facemill hoping to use it on aluminum but no joy... it chatters like crazy even in plastic.
@greggarriss2062 3 жыл бұрын
Mahalo Marius for your hard work.. I used diamond coated cutters at Boeing but am excited to see them available for home use. Though now I consider 3mm a big cutter. I will see if Fraiser offers them here in the US.
@jeffwimer3969 3 жыл бұрын
Very well done. You are very close to a tutorial on how to set your own cutting parameters. Could you please do a video to help us all do our own testing? I have yet to see a tutorial on how to set parameters. Always appreciate your videos!
@jeffklein602 3 жыл бұрын
I like their ability to plunge cleanly. The quality of cut is excellent, and maybe a bit above the bits and bits I am using now.
@homezero 3 жыл бұрын
As always you have come through with GREAT content that is useful and entertaining. I want to thank you for the speeds and feed spreadsheet. This will be used a lot. I do not have a need to purchase bits at the moment but I am sure it won't be long. I particularly will be looking at the planer or flattening bit. I like this one a lot. Currently I have a Genmitsu 3018 CNC and use it for wooden artwork. I hope to be getting a larger CNC next year some time for creating larger work as well as a set of hold downs, cam clamps, Spoil boards with dog holes and such. I am sure I'll come up with more projects as well. I hope to start a KZfaq channel as well. You are inspiring with what you do. Keep up the great work. I'd love to try one of those bits out if possible. Thank you very much.
@DatumCAD 2 жыл бұрын
I don’t know if it may have already been suggested, but adding some ‘Splicer’ filters to some of the more commonly filtered fields on your excel spreadsheet would make it far faster to select the best configuration. Also, thanks for your efforts and quality content, really enjoy your videos.
@garylarson6386 3 жыл бұрын
great video , first time people without experience dont realise the heat has to be in the chip at least with flood coolent you have a chance with light feed rates because of poor spindle HP, there are to many very light duty machines on EBAY that should only be 3D printers, spindle HP and rigiditly are EVERYTHING
@claeswikberg8958 3 жыл бұрын
Great work on the excel sheet, as for the Bluescreen, "windebug preview" will tell you why, down load it from microsoft store, and load the minidump/debug file, and it should give you a good clue as to what caused the BSOD
@etiennedewachter4541 3 жыл бұрын
I understand the testing you made, recording max speed without chatter. From steel machining, there is a called "economic" speed that is being used, meaning that overall life of tool insert is bigger with that speed, reducing overall cost. So called economic speed is lower than max speed you are mentioning.
@rodpotts2666 3 жыл бұрын
Very new to the CNC game ,very expensive ,don't have very many bits. Would come in very useful. Thanks great demonstration.
@DrumNDive93 3 жыл бұрын
#Fraiser I have a slab/cookie that has been drying for quite a while. While I have been working on it with a hand plane to surface the top, it is incredibly hard to get that end-grain cut well. It is also Oak, so my plane has been needing a good resharpening every few minutes. If I had some sort of good surfacing bit, I would be able to make short work of the surfacing and move on to adding legs and finishing this huge table. And for making sure it is level, I plan on using your method of a router sled for surfacing large slabs. If I dont get picked, I will probably still end up getting these Fraiser bits since you were able to give such a detailed table for best results lol. Keep up the great work, Marius! Much Love and Merry Christmas!
@fuzzyep7103 3 жыл бұрын
Thanks for the video and chart this will get me started on my CNC, just finished building it, and help me adjust where needed. Currently improving a Gerbil wheel for my daughter her Gerbils as they demolished the original one :-)
@k2OS 3 жыл бұрын
Wow.. that's a lot of work you put into this video.. I have been looking for a surfacing cutting bit for a long time, and now it seems I have found one :D
@flow0003 3 жыл бұрын
Endlich noch jemand der den C++ Editor fürs NC Code lesen nutzt 👍🏻
@MariusHornberger 3 жыл бұрын
Mit Farbe ist das einfach VIEL übersichtlicher
@flow0003 3 жыл бұрын
Ich hab mir extra eine eigene Sprache erstellt die genau das markiert was ich haben möchte
@davidabineri908 3 жыл бұрын
Thanks for all this very good data. I can definitely use these in my cnc.
@pinx3d 3 жыл бұрын
Marius, you certainly have a lot of time on your hands to to do a great test report
@marcoschwanenberger3127 3 жыл бұрын
Excellent video. Looking at the scroll bar of the unfiltered spreadsheet that was probably way more work than what you give yourself credit for haha! I'm sure alot of people will appreciate the cutting data, making their lifes a little bit easier, thanks to you!
@dzee9481 3 жыл бұрын
Marius very well done video for your machine, I am curious if you do the same type of experiment where you ONLY do conventional cutting or climb cutting. I have noticed that where the bit is cutting in the same direction of the rotation of the spindle makes the edge more jagged if your feed is fast, smooth if your feed is rather slow. Chatter, one would expect at climb cut where the cut is going against the direction of the spindle.
@hansangb 3 жыл бұрын
Well done! I know how tedious it can be to collect and collate data!
@jims11762 3 жыл бұрын
I wish you could do a test on coated and non coated bits, to see if they really last 3 times longer? Maybe take some macro shots of the bits before and after. Anyway thank you again for another great video. Really enjoyed that. Have a merry Christmas and a happy new year.
@haroldchoate7497 3 жыл бұрын
Why do I feel unworthy of the tools you demonstrate? Great job, thank you. Merry Christmas,
@lint2023 3 жыл бұрын
Awesome data pack. Awesome bits.
@Blue_4-2 3 жыл бұрын
Merry Christmas! Thanks for all the videos in 2020! ⭐️😊👍
@MattCaffell 2 ай бұрын
isnt a cut rate normally measured in distance of the OD per minute. Larger Diameter cutter, the slower the spindle,
@MultiKlompen 3 жыл бұрын
7:22 That means, you cut 0,2mm wide and 35mm deap?
@MariusHornberger 3 жыл бұрын
0,4mm stepover was also possible (that's in the spreadsheet)
@Kim-nn4fi 3 жыл бұрын
I would love to use these on my CNC.I will use the bits to make a new beter and bigger CNC macine.
@SavvasPapasavva 3 жыл бұрын
Very interesting video. Do you happen to know the acceleration rate of your machine? That can effect the cutting speed if the distance being cut is short and you can't get to cutting speed.
@vesaruusunen5685 3 жыл бұрын
Thank you. Makes me to want CNC also. That would also need an another man cave :) Have a great Christmas.
@laubbub1960 3 жыл бұрын
Hi Marius, cool video. It looks like a whole lot of work. But I think the sheet with all this cutting data is worth it. And I'm so thankfully that you share it with us. But how long did it take you to do this test series? And how much material was machined? #Fraiser I built a CNC not to long ago. I'm still improving it and try to find good router bits. And of course these bits are great for plunge router applications. Next Project will be a cabinet with a lot of drawers to organize all of my screws and nails and other parts. Because now they are all in a shelf right now and it's a just a mess. So there will be a lot of grooves and rabbets to be cut for the drawers.
@MariusHornberger 3 жыл бұрын
The testing was done over several weeks. Material consumtion...maybe half a sheet of plywood
@eformance 3 жыл бұрын
The subtitle for this video: the most expensive way to make Birch paper :-)
@grumblycurmudgeon 3 жыл бұрын
Dude, have you ever SEEN the machines they use to cut the birch veneer BB Plywood is made out of? This is cheap at 500x the price!
@CNCSwede 3 жыл бұрын
I would need these bits for a future guitar neck project on my youtube channel 😊
@mattheld4219 3 жыл бұрын
this is way too complicated for me, but I appreciate the thought and time you put into it.
@davidalan6701 3 жыл бұрын
I’d use the bits to carve wood/resin jewelry
@joppepeelen Жыл бұрын
450meter a minute ? should be mm or cm. i probably say something everyone already mentioned though. but great videos and great projects !! superb work !
@BobBurrow 3 жыл бұрын
#Fraiser I don't have a CNC cutter, however my router accepts the 8 mm shaft. One of the bits would be great for cutting deep slots. (The video really summarizes how much work went into producing the spreadsheet. Maybe you can do a part 2 with a harder wood. You might even hit the maximum power of the spindle with the cutting bits.)
@iPhonisti 3 жыл бұрын
#Fraser I would use the bit in my upcoming kitchen renovation. Also been looking for good surfacing bit for some oak slabs. Thank You Marius for great video and shearing all that info work!!
@johneverett5137 3 жыл бұрын
ideal bits for my pantorouter
@robertmartin2968 3 жыл бұрын
Thanks will get some off those myself
@ReevansElectro 3 жыл бұрын
#Fraiser - Best of the season to you Marius!
@JeffYantha 3 жыл бұрын
Another great video Marius! Those #Fraiser bits look great, I would love to get some for a work clamping system I've been working on, which was inspired by your CNC clamping solution.
@Itslvle 3 жыл бұрын
If it wasn't clear to people watching your videos already, engineering is clearly your calling. :D I'm definitely saving this for later if I end up getting a CNC-router. The narrow spindle attachment to the Z-axis is quite puzzling. It's such an obviously flimsy solution that I can't imagine the engineers designing this could have missed that. It feels like it has to either be a non-issue because the first issue you pointed out ends up causing chatter much earlier anyway before the mounting becomes a problem. Either that or they deliberately designed a chatter inducing element to create a larger difference to their higher end models. I sure hope it isn't the latter. Do you have any plans on trying to stiffen up the spindle+mount or is it "good enough for now at least" as it really only costs routing time?
@MariusHornberger 3 жыл бұрын
yes, I'll use a spacer piece and another bolt to close that gap
@aztecnology 3 жыл бұрын
I have a lot of CNC projects that could use some Frasier love!
@breakinn403 3 жыл бұрын
Very informative thanks for sharing.
@nefariousyawn 3 жыл бұрын
#Frasier I used to tell my dad that he needs better bits for his CNC, but this video has convinced me that I need to just buy some for him. He mills Corian scrap to make things like switch and outlet covers, drawer pulls, etc. His cheap straight bits chatter like hell, and there is basically no chip ejection.
@AndreasHontzia 3 жыл бұрын
14:45 Can you prevent the fraying edges by attaching a thin piece of sacrificial wood on top?
@MariusHornberger 3 жыл бұрын
That could help, but usuylly is not worth the effort. A down cutting bit works best
@chemcody5119 3 жыл бұрын
Merry Christmas to you and your family Marius!
@KunsthandwerkBenner 3 жыл бұрын
Hallo Marius, sehr aufwändiges Video und sehr detailliert. Übrigens, ich verwende deine Anleitung zum Bau der Schärfvorrichtung für Drechseleisen und verlinke selbstverständlich auf deinen Kanal ;) Gruß Stefan Benner
@daviddickmeyer5231 3 жыл бұрын
Thanks for all of your extensive testing of these # Fraiser bits. I will be looking to use them on my new Onefinity CNC machine when it arrives. I sure enjoy your videos. I’ll bet your next one shows you beefing up the router mount on your Hammer! 😆
@MariusHornberger 3 жыл бұрын
Kind of, yes
@Tom-xl2ni Жыл бұрын
Amazing information. Do you have your GCodes hosted anywhere like Github? I am trying to learn EdingCNC.
@grumblycurmudgeon 3 жыл бұрын
#Fraser, I'm building a 2-plane inverted jointer that allows for both the flattening of and setting angle of intersection for slabs on two axis simultaneously. Marius, I could kiss you! I've been waiting for someone to do a review of those Boss Beaver Bits in English (KZfaq's subtitles being what they are: "In corking, these bots tour [applause]"); as magical as they sounded, I wanted to really be able to comprehend what I was hearing. The fact that it comes from a maker I admire and whose skills I trust, well, frankly more than my OWN, even, was all I needed to hear. I'm placing an order as soon as I'm done writing this. *HEY FRASER! HEAR THAT? Good call on sponsoring this video. It's been up for 7 hours and it's already bagged you a couple sales!*
@martinsvensson6884 3 жыл бұрын
Do these spiral bits work with hand held routers or router tables too? Seems they can be had with some unusual shaft diameters compared to regular router bits...
@MariusHornberger 3 жыл бұрын
Yes, I showed that in the video
@haveaseatplease 3 жыл бұрын
Would it not be more time efficient to ignore chatter, except for the finishing cut?
@MariusHornberger 3 жыл бұрын
Chatter is never good. Bits can break because of that and makes for a shorter machine life
@TheE9climber 3 жыл бұрын
#Fraiser I would definitely make some mortises and tenons for a nice chair with my #MariusHornberger samurai router jig. Also looking forward to having my own CNC hopefully soon and utilizing your spreadsheet!
@FritsvanDoorn 3 жыл бұрын
Very interesting subject. Well explained. I leave the give away for others. Thank you.
@laarmanj 3 жыл бұрын
Thanks Marius, for Your usefull information.
@skysurferuk 3 жыл бұрын
As per @Frisco Rose. Great content.
@Mcphilsmith 3 жыл бұрын
#Fraiser interesting to see the chips. I’ve historically only gotten dust, so I must have my feeds and speeds wrong. Or just bad tooling. I’d like to make some of my projects again with better tools to see if I could be more aggressive.
@grantnlee 3 жыл бұрын
#Fraiser Great details. I need more science (not guessing) behind determining my speeds and feeds! I'd love one of these bits for the cutting boards I am making. Love your work - thanks for sharing!
@DMonZ1988 3 жыл бұрын
#Fraiser is a really cool company. i bought my first bits a few weeks ago and they're suuuuuuper lovely. they shipped insanely quickly and i even got stickers, a pencil and some haribo. bit expensive, but if they have the bit i need they'll be my go-to company. highly recommended. i don't have one of these roughing bits yet but i learned some things here that make it clear how interesting and useful it would be for my next project: a small wiki house. really great video Marius, thank you!
@jasonshrieves4467 3 жыл бұрын
Thanks so much for making this video! Great information and something I've always wanted to do with my bits but never had the time. That roughing bit is epic.... I soooo want one! Is it available in 6mm???
@chrishicks1763 3 жыл бұрын
I noticed that all of the cuts were done on plywood. I know plywood is challenging in its own right. However my question is, How do those bits do in hard wood. Harder of the hard woods like purple heart or jatoba. I ask because these are ones that I use. they will wear out a regular bit fast, even good carbides to last as long in these. What are your thoughts? Love your channel by the way.
@MariusHornberger 3 жыл бұрын
I wouldn't use the max. possible settings from plywood for these hardwoods. I'd try about 75% stepover (compared to max. possible in plywood) and chip load not below 0,05mm
@zengaxxx 3 жыл бұрын
Great video as usual, thanks Marius! and Merry Xmas! #Fraiser next in my to do list is a mudroom bench with shoes boxes.
@alexanderpaulus1307 3 жыл бұрын
Wie sind deine Erfahrungen mit dem "verkrusten" aufgrund von Harz oder dem Leim bei Sperrholz? Ich fräse überwiegend Birken- und Buchensperrholz und kämpfe immer wieder mit dem verkrusten aufgrund des Leimes. Das führt dann zu enormer Hitze und Verbrennungen der Schnittpunkte.
@MariusHornberger 3 жыл бұрын
Wenig bis keine Probleme
@ridhadababi5858 3 жыл бұрын
Very informative thanks for the video.
@mojitomaker 3 жыл бұрын
Fraiser - I want to use them on my Lowrider to make single sheet furniture for schools.
@tommeaney7284 3 жыл бұрын
#fraiser wow you can really push those bits, just moved onto downcut/compression bit on my cnc these would make making the childrens signs and toys finish so much better. Great video, thankyou mate.
@pedrojoao3468 3 жыл бұрын
#Fraiser I will use the bits to make a CNC with my CNC, it needs an upgrade :D
@AndreasHontzia 3 жыл бұрын
5:55 Does it make a difference, if you go with the rotation of the bit or against it?
@MariusHornberger 3 жыл бұрын
Yes, Going against the rotation gives a better finish in most cases. With the rotation is easier on the bits (not really important for wood, only for metals)
@TomLeclerc 3 жыл бұрын
#Fraiser I would use it for maiking drawers using a jig on my router. Great video Marius as always, thanks for the efforts you put into that data.
@bastianzapf1799 3 жыл бұрын
#Fraiser I just finished building my own CNC machine and so far only got bits with a small cutting length, so those bits would be perfect for making projects out of thicker material. As always great video and thanks for investing that much time to gather all of these data points and making them available to us for totally free.
@craftandconstruction3359 3 жыл бұрын
Time to build an enclosure for your CNC =D
@dyomich4517 3 жыл бұрын
like you for an interesting review of such a beautiful good useful technique
@erikcramer 3 жыл бұрын
Cool i was happy with the flattening bit, maby ill get something to make a bowl out of the Mahogani i bought before all the shops closed over here. :D So i would be able to cut this at 395 m/min conventional or should i slow down for this type of wood :P
Jonathan Katz-Moses
Рет қаралды 330 М.
Marius Hornberger
Рет қаралды 71 М.
Marius Hornberger
Рет қаралды 149 М.
Marius Hornberger
Рет қаралды 58 М.