Testing out My Custom Tractor Camera System and Lighting in Real World Applications!

Рет қаралды 56,450

Күн бұрын

PLEASE SUBSCRIBE AND CHECK OUT👇🏽👇🏽👇🏽
WORKFORIT APPAREL: www.workforitapparel.com
HYPERLITE UFO LED HIGH BAY LIGHTS:
amzn.to/3593tEv
HYPERLITE 200watt LED FLOOD LIGHT
amzn.to/2SikJVb
iYing 10.1" Head Unit:
amzn.to/3c5CfD4
FENIEX CANNON LED HIDEAWAY STROBE LIGHTS: amzn.to/38bCfOP
FENIEX T3 GRILLE LIGHTS: amzn.to/37ZXDpM
GET MY SUNGLASSES HERE: amzn.to/2SnnS0s
LED RECESSED LIGHTS: amzn.to/3a4boqc
THE BEST MILWAUKEE LED HEADLAMP: amzn.to/2KmuywY
CONVERT YOUR CIGARETTE LIGHTER TO USB: amzn.to/2IH460l
VLOG CAMERA: amzn.to/2CZfPll
GOPRO HERO 7: amzn.to/2VCZaLO
BULLET ANTENNA: amzn.to/2SK1Oxt
5" EXHAUST: amzn.to/2SLBR0u
MICROPHONE: amzn.to/2VFYtB7
JOYING HEADUNIT: amzn.to/2s8WmbD
CONTACT INFO:
Instagram:
dmaxryno?h...
Email:
Dmaxryno@hotmail.com
Join this channel to get access to perks:
/ @dmaxryno

Пікірлер: 171

@williambagby3721 Жыл бұрын

just a small helpful tip, the 3-point arms extend out to make hooking up easier. there's a plate that sticks up a bit on the arm and if you push down on that then pull the arms out you'll get a bit of range to make hooking up easier

@GMC.Sprint Жыл бұрын

I was saying the same thing as he was backed up complaining about having to spread the arms the back again.

@adampatterson9404 Жыл бұрын

The tractor turned out badass. It would be pretty easy to make an automated tilt mount for the front camera. With an Arduino Nano, servo, and a quick 3d print you could change the angle for the camera from inside the cab.

@RamRhino Жыл бұрын

I would highly recommend a garage sun is hard on stuff protect your investment

@KDlGG Жыл бұрын

He said he planned on it but other projects needed to be done first, like the fencing and mowing etc. no point in installing a garage when you have an extreme potential for a fire to come through and wipe you out

@jaxonbaker2512 Жыл бұрын

Going to need a shop! Hate to see that nice tractor sit out in the sun

@jasonwatzka702 Жыл бұрын

Ryan, I had a Garmin that would tilt down when I hit bumps. If your camera screen has a ball type mount on the back, wrap electrical tape around the ball (like 2 revolutions) and snap it back into its socket. It will never drift down again!

@Fallboy13 Жыл бұрын

The recording from the cameras (though crappy quality) is SUPER nice and fun for watching! And the drone footage of the lighting was absolutely CRAZY!

@louiludog Жыл бұрын

The night drone shots were epic!🚁 Sergio killed it 🔥

@jacobcastro6997 Жыл бұрын

Always love the longer videos!

@krsp7288 Жыл бұрын

Dope drone footage at the end 👌

@Bdigital9482 Жыл бұрын

Side note: never bought a KZfaqrs merch. Bought yours first a few weeks ago and just bought the most recent last night. They’re awesome shirts quality and great fit, Thank you.

@RustyBurch Жыл бұрын

Switch the factory headlight bulbs out for led! Also, i think a little bit more side lights would be nice so when your turning you can verify there iant anything you may run over

@aaronb7990 Жыл бұрын

Sick!!! That light setup is going to save the day... night, at some point.

@JYMBO Жыл бұрын

Drone shots of the tractor were magical!

@joeyostrom8620 Жыл бұрын

The tractor needs rocklights! 🤣🤣 just kidding, it came out killer!

@bling1634 Жыл бұрын

Bro the camera makes hooking up and driving the tractor much easier and those lights look sick

@HumanTree92 Жыл бұрын

Personally i would build a bracket for the front camera and mount the extra camera on top of the other. So you could have one facing downwards and the other facing straight/upwards. Or you could mount the 4th camera on the top.

@jeffd3667 Жыл бұрын

Another Kioti video!! Love it. When hooking up your 3pt attachments, also check your lower link sway. The lower links have pins and holes to lock in place (side to side). Some attachments will shift to the side while driving or using, and rub on your tire, possibly ruining 1 or both. You can also use to offset mower to mow to 1 side more than the other. When hooking to 3pt attachment, spread them wide and pin in place so they clear the implement pins while backing into it. Also, use the release levers on the end of the lower links to give you the extra 3-4 inches. Extend them out, back up so lower link is just past the lower equipment pins. Then you can make the adjustments and get it hooked up 1st time. Now back to watch the rest of the video. Keep up the great work.

@chuckkolancz4969 Жыл бұрын

Lights and cameras turned out dope

@robertfraser5994 Жыл бұрын

Could you put your 4th camera above the windshield? It would give you a forward/downward view from higher than eye level while seated in the cab. Also, enjoy the blooms on those Agave century plants while you can. I think that after they bloom, they die and have to be replaced.

@jairorodriguez3546 Жыл бұрын

I agree because that angle from the bottom kinda sucks

@danieloliver20 Жыл бұрын

Your tractor is sweet, I see an alfalfa crop in the winter at your spread! 🌾🌾🚜🌾🌾

@masonwatts1202 Жыл бұрын

side lights may look like they do much but when we run our tillage crew 24-7 its nice to see around you and a great bit behind you I may need to get one of those light bars to shine all they way out to the back of my disk and packer

@dalegereaux1863 Жыл бұрын

Nice to see that the camera and lights work so well ! 👍

@glenntumbleston8735 Жыл бұрын

That drone footage is legit man looks like a hell of a set up

@leighconduit688 Жыл бұрын

For your front camera, you need to get yourself an arduino and stepper motor and create 3 (or however many positions) pre set angles so you can just press a button and it tilts your camera, be a cool little project to get your head around and would help make life even easier

@schlomoshekelstein908 Жыл бұрын

how do i do that

@justynpeacock5011 Жыл бұрын

The drone shots look awesome!!

@Lawnsbyjason Жыл бұрын

Just separate the PTO shaft and cut both prices shorter. We have to do it at work for some of our attachments

@willied7759 Жыл бұрын

This is the way Edit: I’m leaving the comment since I spoke or wrote before watching the whole thing and saw you come to the realization. Let this serve as a lesson to all about rushing into things.

@clintmiller88 Жыл бұрын

Take the plastic off your seat lol ! Also the 360 camera on the roof would produce some epic shots and drone footage of it following you in the field!

@BlakeBasss Жыл бұрын

I love the light set up! So badass!

@rickmitchell5415 Жыл бұрын

Pretty bright,that’s cool

@Shiesty6.7 Жыл бұрын

Those diode dynamic light bars are no joke.

@Capsaholic1 Жыл бұрын

Awesome setup! Love it.

@stevelawrie7270 Жыл бұрын

looks amazing, congrats!

@joshredden3510 Жыл бұрын

@4:11 the orange spray paint ryan lost sitting right there on the goosekneck 🤣🤣

@JC_Mexicano_En_South_FL Жыл бұрын

Tractor lighting is amazing bro good call 👏🔥🔥🔥🇲🇽 🇺🇸 🤝

@user-cf7vl3ey6n Жыл бұрын

Best mod is the decal 👌🏼

@dimitrikatsafouros6889 Жыл бұрын

It looks awesome ,and a real big farm tractor

@BearCat459 Жыл бұрын

I highly recommend getting a plow maybe a 2 bottom or 3 bottom turn over plow or even a cultivator what ever your tractor can handle and you can hook it up and plow a fire brake if you need to many farmers do that when they have a field on fire and want to save the rest of the crop.

@richardharvey8939 Жыл бұрын

Loved it

@bigdougss5240 Жыл бұрын

Dang son when you pimp it out you definitely pimp it out. I love it

@garymiller652 Жыл бұрын

Dude that thing looks sweat bro! Those light’s definitely set it off

@donbergdoll331 Жыл бұрын

You can just cut the driveshaft to fit

@donbergdoll331 Жыл бұрын

I should’ve watch the whole video 😂

@maxseed4730 Жыл бұрын

Another great video

@jp_double_tap Жыл бұрын

That's cool bro .. those lights on that tractor made it 💯 % better to see

@JJShreffler Жыл бұрын

You should paint marker your front camera for your 2 positions...between hooking your plate and having your fork view

@derangd3339 Жыл бұрын

Diode dynamics don’t disappoint I have them on canam work great

@darrenentrekin2206 Жыл бұрын

if you look to the right front there is a tube with a soild metal rod it shows you when the forks all level old school

@lwwarren 8 ай бұрын

Take the display off the roof and mount it to the top of the dash. You can easily modify that mower to work with a quick hitch, especially with a hydraulic top link. Mount your 4th camera on the torque tube of the loader.

@shearerperformance4016 Жыл бұрын

Awesome ideas ryno

@brendonpartridge6362 Жыл бұрын

Hey Dmaxryno a nother awesome videos on your channel u put out the best content u definitely my favorite KZfaqr the 60 look good pulling the pj trailer keep up the great work

@MichaelSchneiderTexas Жыл бұрын

Awesome lights. Now some rock lights on the bottom so you can see the tires, couple blinkers like on the trailer if your on the roads. Ceramic coat the windows so they clean easily and rain rolls off .

@harleyhiebert2862 Жыл бұрын

A tip for the draw bar you usually can swing the bar to one side for mowing. Those silver pins on the back by drawbar can come out

@brandonrowe1298 Жыл бұрын

I love the tractor man

@mikerichard-FOPA3 Жыл бұрын

I love you’r lights

@SUBI_PaT Жыл бұрын

Dang man…….that must have been you I saw you light the sky up all the way to Massachusetts 😂😂😂😂😂😂 looks awesome man Sergio needs a shirt now that says I’m the mastaaaaaaaah wiring guru awesome video as always

@Billy-cl9vb Жыл бұрын

Cold beer and dmax drops a new video that’s a good friday

@rickmitchell5415 Жыл бұрын

You rock Ryno

@leebolkema9463 Жыл бұрын

Ryno I think u forgot to put a strobe light package on ur tractor when doing all the lights

@barryschneider7913 Жыл бұрын

So cool

@barryschneider7913 Жыл бұрын

Sergio's amazing

@J__HUTTON Жыл бұрын

Let's goooo ryno ❤❤❤

@ericwilson852 Жыл бұрын

Hook shaft up to mower first, then extend to the tractor. I believe that shaft will work for you if you do that. There’s too much of a angle to do it hooked up to the tractor.

@johnnycampbell2719 Жыл бұрын

Kioti looking sweet 🤘

@nugeandavis1524 Жыл бұрын

You should put the 4th camera on the front as well so you can have one down and the other one straight

@brandonrowe1298 Жыл бұрын

In his other video he said the fourth one came messed up

@nugeandavis1524 Жыл бұрын

@@brandonrowe1298I know but could get a new one or find one that fits

@brandon1661 Жыл бұрын

I bet Sergio can hook you up a review mirror adjustment motor to the front camera so you can adjust it from in the cab

@adolph289 Жыл бұрын

that is very nice

@mwils51 6 ай бұрын

I am waiting on my Kioti RX7320 cab to be delivered by the dealer now. It was supposed to be delivered last week but it is far too wet right now. Just got 8 inches of rain. I had the dealer install a front and rear camera on my Kioti. They also added 3rd function, grapple, forks and a rear box blade. I can't wait! How is your tractor working out for you now?

@yomajesty3523 Жыл бұрын

I feel like you should’ve put the shaft in first then hooked up the 3 points. It probably would work that way 7:23

@wolfpreist Жыл бұрын

the top link is always easy. do the arms first, you've got extendable lower links, press down on the top part of the bottom link and they slide out an inch or two. then as you back up, you can use the extendable links to line it up, with the extendable links, you don't have to be as close. then do the top link. If you're not going to have all 1 brand of 3 point implements, be careful with the quick hitches. The universal ones almost all take extensive modification to make them work, and the brands usually work really good for their brand, and not well with any other brand. you can also get 3 point post hole augers. Yeah, most PTO equipment has a place in the manual where it tells you how to cut the PTO shaft to fit.

@muddydevil Жыл бұрын

love the content ryno wish you had bigger sized shirts id love to buy some designs if they were in bigger sizes

@Mcarson10 Жыл бұрын

On your pto length make sure you check new equipment you get also. Most of the time there not cut down to size either. You will lift it up when it’s shortest and be mad when you push the rear seal out of the tractor around the pto hook up.

@jimmendoza4625 Жыл бұрын

The small ones on the side towards the front sides to eliminate the blind spot to make turns at night

@nikwinters498 Жыл бұрын

Ryan: “if you haven’t been following along…” Me: *watched every video since 2018*

@Paper4150 Жыл бұрын

Lets GO!!!

@SteveSnowman 7 ай бұрын

Great stuff here, thanks. Lookin (pun intended) to purchase a 2-camera system for my bucket and titan forks. CK2620/2023 - N Idaho -

@robertfitzgerald8243 Жыл бұрын

We have 60 inch finish mowers for 900 bucks in mn..work awsome on that tractor

@RaspingPompano2 Жыл бұрын

The bar in the middle is adjustable so you can either pick up the front of the deck or how you have it which picks up the whole deck.

@j.d.gilbert6028 Жыл бұрын

You should add pods to the corners

@RyanB-gi2fj Жыл бұрын

Time to add some lights underneath it 😂. Gotta complete the effects.

@adrianyflores8932 Жыл бұрын

Beautiful u deserve it nd mor 🙏 🙏

@justinhutson8489 Жыл бұрын

Put the fourth camera on there on the front pointed down at the plate for your attachments and then leave the other one adjusted the way you had it and you’re good for both situations

@FUCK1T03 Жыл бұрын

You can cut the pto shaft shorter they are made for it

@zacheryzeiters9711 Жыл бұрын

Maybe use the 4th camera when you hook up and unhook so you don't have to move camera

@camronking7947 Жыл бұрын

Great video! You need a newer, bigger mower tho lol

@deejay540000 Жыл бұрын

What camera system are you running on that looks good

@dippo_13 Жыл бұрын

28:16 Is that a spaceship? 🚀🛸

@coopervroman2952 Жыл бұрын

Checkout bullet point mounts they make them for tablets and are very small mounting I think it’s a 2x2 square and it has a bar for length and angles

@aaronm.3398 Жыл бұрын

13:47 Butter.

@jeremyflores9019 Жыл бұрын

What screen and camera system did you use?

@macgnificent5953 Жыл бұрын

Thoughts on doing some step lights or rock lights under the tractor?

@Lawnsbyjason Жыл бұрын

Guess I should of waited to later in the video to comment lol

@jasonmiller9508 Жыл бұрын

You need a steering knob. Makes small movements a lot easier.

@JosephMoralez-oo2ud 6 ай бұрын

Your mower gearbox is set up for 1000 PTO shaft and your tractor has a 540 PTO you should go to your dealer and get a 1000 PTO shaft. My John Deere has both you may check your tractor, it might have both also.

@Mirr0r_Man771 Жыл бұрын

There is a very good tutorial vid of how to cut a PTO shaft to length on youtube channel Tractor Time with Tim - if that takes your fancy!

@Hankjr3935 6 ай бұрын

Just cut the shaft to fit. Set at the shortest length and give it 2 inchesof play.

@joshlight8503 Жыл бұрын

You have to cut the pto shaft down even with brand new stuff everything's a little differnt on every tractor and implement. Pull the shaft apart in the middle cut a few inches off each side not just one side and slide it back together u want to find the happy middle

@keithscoggins9394 Жыл бұрын

Measure with the mower all the way up and all the way down look for your shortest point then cut for that length so you don’t push out your rear pto seals

@StaYUTI420 Жыл бұрын

Based on historical topos and aerial imagery the east side of the property has never been touched, sans a dirt path and where Ryno Block Brick is now at the front.

@robbydavid2286 Жыл бұрын

Just get a lower camera for the front of the tractor so you don't have to move cameras all the time and it might help with the forks too

@bobbyfisher6343 Жыл бұрын

The mini ex is jealous…lol

@K5Tony Жыл бұрын

Probably a dumb idea but you could paint the back of the guard plate where the tips would be as it looks like the tips are just visible below that plate and then the paint wont wear off from picking things up and you will still know where the tips are for aligning with pallets.