Testing out the Kingbolen K7 scan tool.

No video

Testing out the Kingbolen K7 scan tool.

Рет қаралды 1,285

Күн бұрын

The Offroading Mechanic amazon affiliate store
amzn.to/3SiOjXd
Kingbolen K7 scanner that was used in this video.
amzn.to/48orzcD
Or check out there website here:
kingbolentool....
Follow me on TikTok
www.tiktok.com...
------------------------------------------------------------------------------------------------------------------------------------
YOU CAN ALSO ENJOY WATCHING THESE :
Thieves are getting a little bit smarter, just a little.
• Thieves are getting a ...
Honda Pilot, Odyssey, Ridgeline & Passport 9 speed automatic transmission fluid type 3.1 replacement
• Honda Pilot, Odyssey, ...
2016 Honda fit, no start, no charge, no communication (DIAGNOSIS)
• 2016 Honda fit, no sta...
First break in oil change on the 2023 TRD Pro 4runner.
• First break in oil cha...
What I think about the 2023 4runner so far and what kind of problems I have had
• What I think about the...
2008 Honda civic spark plug tube seal. (not really tube seals but crush washers)
• 2008 Honda civic spark...
Customer states my blower motor doesn't work on any speed. Here's a trick I like to use In a pinch (cool trick if you don't have a test light)
• Customer states my blo...
Disclaimer:
Due to factors beyond the control of The Offroading Mechanic, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. The Offroading Mechanic assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. The Offroading Mechanic recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of The Offroading Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
---------------------------------------------------------------------------------------------------------------------------------------
#carrepair #Theoffroadingmechanic #automotive #carmaintenance #toyota #honda #generalrepair

Пікірлер: 11

@braydenjennett878 6 ай бұрын

Price looks right.. you’ll have to update in the future as far as continued use and functionality. I may be needing a personal handheld in the near future

@thirdgearboogie2210 6 ай бұрын

Nice review! I primarily work on Gm,Ford,Ram trucks for a few landscape companies. Looking for something just like this.

@thirdgearboogie2210 Ай бұрын

What are your thoughts on this tool so far. I am still trying to make the decision if I should give this a shot. I work on a little bit of everything. Also wondering if this would have the ability to reset ABS modules and write VIN#

@theoffroadingmechanic Ай бұрын

I didn't get a chance to use it to write vin but function wise it is ok for bi direction control live data just doesn't have the fancy function for say for example using the tool to aim the safety system if you have changed the radar or the camera on the windshield. But there is a difference in using the tool at home compared to using it for in the field/dealership it might be more than enough for a diyer but using it at work everyday I still find myself switching back to a factory scanner for certain things. I'm planning to review more scanners autel, topdon and xtool. Just need the money for them.

@thirdgearboogie2210 Ай бұрын

@@theoffroadingmechanic I'm really interested in the Launch X431 Pro TT.

@LegendaryWaterBottle 6 ай бұрын

Hey @theoffroadingmechanic , quick question for you if you feel generous to chip in your answer to this question: I have a 9th gen Civic that is starting to have a massive brake pulsation, but it doesn't pull to either side. Rotor was replaced in 2020 and it was starting to do this from 2023. Do you know if there is a common issue with these? Interested to have you look at it if possible!!! (Viewer based in Van/Burnaby) Tempted to get this scanner now since it works so well with Hondas ahaha

@theoffroadingmechanic 6 ай бұрын

Did you replace rotors with aftermarket ones? Never had issues with OEM ones even after machining them to minimum spec. But with the aftermarket stuff are just terrible sometimes my friend got a set of rotors recently for his f150 and after a few weeks he was getting a shake in the steering wheel when braking. Luckily lordco warranty them and fixed his issue. I've had aftermarket ones warped right out of the box after taking it for a test drive. I put it on our lathe and it was out ended machining them, put it back on the car and the pulsation/shaking went away. Also if you have rust build up on the hub and who ever didn't clean it and applied a film to prevent the hub from rusting can cause your "warped rotors" due to rust not letting the rotor sit flush against the hub or start building up.

@LegendaryWaterBottle 6 ай бұрын

@@theoffroadingmechanic Interesting. My brake rotors are in fact aftermarket but I took all the necessary steps to avoid issues such as: scraping off rust on the hub, adding a layer of anti-seize and proper bed in procedures. I guess these don't negate quality issues with aftermarket. I'll slap on an OEM one :)))

@northpoint1039 6 ай бұрын

wonder if this scanner does misfire counts?

@theoffroadingmechanic 6 ай бұрын

It really depends on the vehicle and if it supports that information for the scan tool. Like on the older Honda's information for live data are limited but on newer vehicles that are more advanced the list of live data is a lot more. You can always go into mode 6 in generic obd for misfire information on the older vehicles.