TESTING The Cheapest Pneumatic Nail Remover On AMAZON!!

Рет қаралды 162,205

Күн бұрын

Today, I am testing the 3 Plus Pneumatic Nail remover for your entertainment and education. This tool is used to remove nails easily from reclaimed wood and pallets. There is several of these tools on the market and I have attached affiliate links to the 3 Plus and Air Locker below. Thanks for watching!
3 PLUS Nail Remover: www.amazon.com/gp/product/B07...
Air Locker Piston Assembly: www.amazon.com/gp/product/B00...
Air Locker Nail Remover: www.amazon.com/gp/product/B00...
Subscribe: / @lastingbuild1373
Music: www.epidemicsound.com
Disclaimer: LastingBuild is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means to earn fees by linking to Amazon.com and affiliated sites.

Пікірлер: 154

@lastingbuild1373 3 жыл бұрын

Hello, Friends! Here is links to additional videos you will like! Testing the cheapest oscillating spindle sander on amazon 🔴 kzfaq.info/get/bejne/nbKJjKycvuDWlZ8.html Testing the cheapest universal socket on amazon 🔴 kzfaq.info/get/bejne/f7aYnZuTyK-Whn0.html

@notcharles 2 жыл бұрын

There is a 'world of difference' between nice clean nails recently driven into a piece of two-by and the corroded stuff remaining after prying old 'pallet' boards apart

@nenolabrego Жыл бұрын

100%, plus I'd love to see it in hard wood, not pine

@Danny_Boel Жыл бұрын

and as per usual with pallets, the nails are a lot tougher than the wood

@mjremy2605 8 ай бұрын

Makes no difference. The rusty nails will be knocked out easily too.

@BobRooney290 Күн бұрын

doesnt help with floorboards.

@beer-n-wood 3 жыл бұрын

Have used airlocker for 3 years. Love it. Turn up your pressure and use over a bucket of water. Higher pressure drives the nails right through and the water stops them. No messing about with a Hammer

@DeanJuvenal Жыл бұрын

A great tip. T Y

@Ham68229 3 жыл бұрын

Did you try those spiral or ring shank nail? That's how most pallets are put together with.

@lowlimitlife 3 жыл бұрын

Use a paint stir stick with multiple small holes drilled in it. Slide over the nail before the tool and it won’t leave a mark on the wood.

@markzanetti6228 2 жыл бұрын

great idea.

@donmiller8712 3 жыл бұрын

The air locker will also knock the nails all the way out of the wood. I've been knocking out screw thread nails since I bought the air locker, great tool.

@ThatPartsGuy 4 жыл бұрын

I have the Air Locker version. Looks to be a bit smaller than this one, but same concept. I was using it to remove 4" spikes from old growth 1" oak in my 120+ year old house. No problems. My mother-in-law saw it and took over. Again, no problems. Suggestion on bent nails is to bend them back as close to straight as possible. We suspended the boards over a 5 gallon bucket with crumbled paper in it. Kept ricochets to a minimum. Another use that I just found is as a nail set. I put a bunch of new door trim up before realizing I had the wrong setting on my 16ga air nailer. Heads left up about 1/8". Turn the pressure down to 40psi and it taps the nails to easily caulk over.

@lastingbuild1373 4 жыл бұрын

It’s definitely a useful tool!

@TheGojodfrey Жыл бұрын

I use a half bucket of sand, straighten the nails as best you can, snap off and rusty tails. When you are done chuck a big magnet in shake the sand and it'll pick up the bits

@randomstuffwithnofluff7472 2 жыл бұрын

Great review, thanks. I went with the Airlocker, it's much, much smaller and leaves a smaller indentation. Either one you go with, they're so useful and cheap, I feel like I ripped them off...such a time saver.

@Riqrob Жыл бұрын

Also. I used my Airlocker to drive rusted nails through some corrigated metal in order to remove it. Worked great.

@blurybury 3 жыл бұрын

Great video just what I've been looking for thank you

@Normal1855 4 жыл бұрын

Great video. I bought the Air Locker, but this does the same thing. I plan on using pallet lumber for my projects. I also bought a planer for using pallet lumber.

@josephlevin5173 Жыл бұрын

Excellent, very helpful. Thank you.

@johnfithian-franks8276 4 жыл бұрын

Hi, I have had one of these tools for nearly one year now, I use 100% pallet wood and I have been using it all the time. I am very happy with the tool and I suggested it to you. I have not had any problems, nor have I broken any of the working bits. It has saved me many hours of frustration and turned a necessary job into a sinch.

@lastingbuild1373 4 жыл бұрын

Appreciate that!

@waynesligar5948 4 жыл бұрын

Yes i love it it's just i can afford one but i think it's awesome

@stevecurtis4137 2 жыл бұрын

Just ordered me one, thanks for the video!

@kevinmahaney3650 2 жыл бұрын

Great video! You get right to the point and dont waste time. I can tell by your shop you put out some good work. Good job!

@lastingbuild1373 2 жыл бұрын

Thanks Kevin!

@mjremy2605 8 ай бұрын

Recommended operating pressure: 70-120 PSI. The small Porter Cable Air Compressor I have is 150 psi and 6 gals. Should be able to handle this perfectly. This was a great review, many thanks!! I like the full aluminum body on this tool.

@joephillips8244 4 жыл бұрын

I just use my air hammer with a chisel tip that I have ground to a slight recess and it works perfectly. Cost is very little if you go to HF and get the cheap air hammer.

@murraymadness4674 2 жыл бұрын

Also add the HF Palm Nailer works too, just a little slower, but NO DIVET created.

@douglasadams4540 4 жыл бұрын

Thanks I ordered this tool a couple months ago and hadn’t got to use it yet. Thanks for the info

@lastingbuild1373 4 жыл бұрын

Hope the video helps!

@bobhightower9381 2 жыл бұрын

Guess I must be the last guy on Earth to hear about this wonderful piece oftechnology, huh? Guess I'll have to buy one for each hand, in order to catch up with everyone else! Seriously though, great review, and lots of good insight in the comments. Liked, subscribed and many thanks.

@SouthernEngineering 4 жыл бұрын

Nail Remover, who new! Thanks for the demo and review.

@lastingbuild1373 4 жыл бұрын

Yes sir!

@talkingcargojunkremoval 3 жыл бұрын

I didn't know.

@paulbradford8240 3 жыл бұрын

Very interesting. I didn't know the tool existed.

@HOODS 4 жыл бұрын

Wow I never knew such a tool existed. lol all the hundreds of hours me my wife and kids have invested in pulling twisted and bent nails and ring shank nails from oak pallets. Im almost afraid if I dont buy one of these. And they find out first. Ya it may not be pleasant.

@mvblitzyo 7 ай бұрын

Awesome

@lilybecerra2035 4 жыл бұрын

Ty for great information 👍

@TheKingG2010 Жыл бұрын

This definitely would make a good nail punching tool

@vermasean 2 жыл бұрын

Excellent test video! Obligatory Liked and Sub’d! 👍▶️

@eo1scwmwf 4 жыл бұрын

I have the air locker and the plunger is smaller which leaves a smaller hole. Turn your pressure up and it will drive the nail further out or completely out.

@lastingbuild1373 4 жыл бұрын

Thanks

@gamomofthree7796 3 жыл бұрын

Thank you so much! We were given a truckload of reclaimed hardwood and you just made removing the nails from it so much easier.

@lastingbuild1373 3 жыл бұрын

Your welcome! Great tool for sure!

@matteogalfredi4091 Жыл бұрын

Hey pal, what kind of air compressor do you need for this tool?

@avrahamkrichevsky4831 2 жыл бұрын

Thanks!

@nevilleclark8633 3 жыл бұрын

I have purchased a cheap one which I have modified to punch nail heads into old jarrah floors in order to sand said floor .it works a treat I just cot the end off the rod so it protrudes about 1/8 of an inch.it works a treat!

@philiphinton1350 2 жыл бұрын

Oh, great idea for resetting the lifting nails in my deck, Neville! I almost had enough justification to buy one already and your suggestion's made all the difference: I'm going to buy one this week 🤗

@chockey134 Жыл бұрын

How would this work on decking punching nail further down into joist.. countersink nicely?

@gregwhelan1694 4 жыл бұрын

Put a small metal plate with about a 1/4 hole over the nail and against the wood to protect the wood from impact

@lastingbuild1373 4 жыл бұрын

Thanks for suggestion!

@parkinglotstriping9800 4 жыл бұрын

i was going to say a washer or something like that

@Normal1855 4 жыл бұрын

@@parkinglotstriping9800 I was going to say the same thing. I might try that.

@markzanetti6228 2 жыл бұрын

use the equivalent of a dinner fork that wraps around the nail. a slotted piece of thin metal.

@patriciashaver489 Жыл бұрын

Can you use the tool to push the nail heads through pallets insteas of using a sawzall to but the nails?

@watermain48 Жыл бұрын

Great video, subbed after watching it. How does that tool do when the pallet is put together with those awful ringed nails that so many pallets have?

@maker_jds7672 3 жыл бұрын

Every part of the Air Locker AP700 is replaceable now. (except the main body of the tool) 2021

@thea2zreviewshow962 3 жыл бұрын

What kind of air compressor do you use with the nail remover?

@bbruuse 2 жыл бұрын

Thank you so much

@The_Handyman_Can Жыл бұрын

Have you tried using it to countersink existing nails into a hardwood floor? I’m thinking it’ll punch it in too far, or maybe there’ll be too much resistance going into the hardwood floor joists.

@wildmanofborneo Жыл бұрын

Hi what diameter is the driven inner pin? I want to use it to punch holes through 26 gauge steel.

@justmeva 4 жыл бұрын

Great review, lots of useful information - thank you.

@lastingbuild1373 4 жыл бұрын

Thanks!

@zstewart123 4 жыл бұрын

Have you tried pushing the nail through by the nail head? This would eliminate the need to pry the plank from the stretcher.

@lastingbuild1373 4 жыл бұрын

I have not, yet!

@blurybury 3 жыл бұрын

So the nail head will not go through the wood so easily and so you will still need to pry out the nail but now without a head. I could be mistaken but I believe there's a tool that automatically pulls out the nail from the nail head. Could be just my wishful thinking.

@markzanetti6228 2 жыл бұрын

I wonder if the Compact Palm Air Nailer by HF - $20 - would do a good job also. Plus ya get a nailer to boot.

@repairknight5996 3 жыл бұрын

Thanks

@galvaoalb 3 жыл бұрын

Hi, is there a machine made to cut brad nails? For example, brad nails in a furniture. I just want to cut and paint again. Thanks a lot

@lastingbuild1373 3 жыл бұрын

A reciprocating saw with a metal blade may be what your looking for!

@garyjones2582 3 жыл бұрын

Have you tried it on pallets that have the spiral nails? Would it be possible to weld a collar extension so that the piston didn't penetrate the wood? Thx for the video.. very professional..

@lastingbuild1373 3 жыл бұрын

It’s strong enough for spiral nails! Not sure about the modification!

@stealthsrt4 3 жыл бұрын

might be able to get a small metal bushing same size as the end so it wouldnt penetrate, i will more then likely order me one of these

@JDLarge 4 жыл бұрын

Maybe a mod? Shorten the plunger by 3/16ths or so? Then it would stop flush or just before the end of the tube perhaps preventing that ugly divot... I dunno but I’m ordering one still under $50 that comes with a spare plunger that I may try to modify myself. That’s for the education on this, I’ve been wanting one for a while now and had only heard about it, pretty cool!✌🏼

@philiphinton1350 2 жыл бұрын

I thought about that too, but it would prevent you removing those cut-off nails later in the video. A metal plate or removable tube extension like others have suggested would be the answer.

@heinz6344 Жыл бұрын

Well done! I think, if you will press the nail gun fairly strong onto the board, the nails will be shot out. In the way you practice it, the nail gun is bouncing back and losing much energy.

@tsant6591 Жыл бұрын

Exactly. He wasn't sliding the tube all the way flush to the wood.

@oriomizu8303 2 жыл бұрын

Hello can you tell me what is the name of tool that,?i want to buy it..thanks for answer

@bryonkavanagh6209 Жыл бұрын

You get any jams? Mine jammed up on first use

@user-xe7wc4nb3f 4 ай бұрын

Is there an electric version of this? I can't seem to find one

@sonicbob7127 3 жыл бұрын

Have you tried to lower the air pressure to see if the driver divot lessens the depth of the divot?

@lastingbuild1373 3 жыл бұрын

I have not but that is an idea!

@joshgerszewski 3 жыл бұрын

i seen this tool on some diy show today. never knew a air punch was a thing. it kinda blew my mind. am now shoping around for one bc i have no idea what a good brand would be.

@lordsteven1st1 3 жыл бұрын

The airlocker on amazon is a great tool I have two and used them hard for many years

@joshgerszewski 3 жыл бұрын

@@lordsteven1st1 thanks. I will look into them.

@ljeanwoe 2 жыл бұрын

On the pallet wood, Can you rest a loose nail on top to see if it pushes one nail out.

@markzanetti6228 2 жыл бұрын

huh?

@PowerScissor 3 жыл бұрын

Tool in action starts @2:32

@monteglover4133 3 жыл бұрын

Will it drive out twist nails.

@lastingbuild1373 3 жыл бұрын

Yes, if it can reach them

@jamescrosby3105 2 жыл бұрын

hitting it on the head Will it drive a nail l all the way through the wood?

@lordsteven1st1 3 жыл бұрын

Have the air locker for 5 years an being able to replace plunger is nice have run 1000s of pallet nails oak an pine through it an replaced 1 plunger real work saver

@antonybuck2126 4 жыл бұрын

Anyone in UK managed to find this out something similar? None available on amazon or eBay etc

@tammyfinch6735 4 жыл бұрын

A person w/ the tool needs to have a piece of metal that can be slipped around the nail so it can keep it from causing the divit. I love that tool. I do a lot pallets. That would be a life saver.

@lastingbuild1373 4 жыл бұрын

Thanks for sharing!

@roberttill3787 4 жыл бұрын

It marks the wood because the air pressure is too high. If the pressure is reduced the pin will not shoot out so far.

@souldimitriou9480 3 жыл бұрын

In a Australia we use a claw hammer! Cheaper and more portable no compressor needed !

@qsmith4639 3 жыл бұрын

You are obviously not processing the amount of pallets in order to buy one of these.

@epiccollision 8 ай бұрын

Oh that's what it does, how every niche.

@russelblackwell6041 3 жыл бұрын

Will it remove toe or finger nails buy one for the wife cheaper than a manicure in all seriousness looks pretty good nails put in with airgun can be thin and bend just looking at them and too time consuming those who like the rustic look don't mind the old nail holes and brushing timber by putting nuts and bolts in a bag and belting timber so that when you stain it then it gives that weathered look

@donpayne562 4 жыл бұрын

Wonder if you could grind a nail set down to fit for the flush cut nails?

@lastingbuild1373 4 жыл бұрын

Probably could!

@joddog 2 жыл бұрын

So it’s a hammer? I’m struggling to see much utilisation for this tool

@BiggMo 3 жыл бұрын

At $43 I suspect it’s made of zinc or some cheaper alloy and not aluminum

@TaintedMojo 3 жыл бұрын

Didn’t even know there was such a tool

@melissadrinkwinebutt 7 ай бұрын

omg you my GOD !!!! I so sick of hitting nails ....

@dcslapout5697 4 жыл бұрын

Thank you Jim! My only concern would be the damage. Really wouldn’t want to use on any fine pieces

@lastingbuild1373 4 жыл бұрын

Hey David! Agreed!

@dragster46 4 жыл бұрын

David Connor I made a metal plate with various holes in and put the nearest hole over the nail before using the gun The plate takes the impact and no damage is done to the wood 🙂👍

@PowerScissor 3 жыл бұрын

Imagine if pallets were made with screws instead of nails = heaven #1 most hated thing I do in all of woodworking is removing nails...especially when some guy with a nail-gun blasted in 6 nails in the same spot when 1 would have been sufficient.

@lastingbuild1373 3 жыл бұрын

This tool will help you out! Probably blast all 6 nails out at the same time! 😂

@heenaqadir5338 3 жыл бұрын

What is the air locker connected to? The wire..... No body mentions that. Everyone talks about the air locker, piston replacement etc

@lastingbuild1373 3 жыл бұрын

Air compressor!

@ya472 2 жыл бұрын

Rusty nails in old wood?

@coolhardware65 4 жыл бұрын

What about nine inch nails

@nathanjohansen7169 4 жыл бұрын

For removing Nine Inch Nails I usually just hit eject on my CD player.

@Uneedhelp91 3 жыл бұрын

Underrated.

@visa1960 3 жыл бұрын

You get a extra rod with the airlock

@dustonly1986 3 жыл бұрын

what are you going to do about it if the nails are buried deep without head? is this a toy?

@lastingbuild1373 3 жыл бұрын

It works very well even without the nail heads attached! No it’s not a toy!

@pathansufiyan5859 3 жыл бұрын

Its work in hard wood

@pathansufiyan5859 3 жыл бұрын

????

@waynesligar5948 4 жыл бұрын

Love that nail remover i just wish i could afford one now that i had to be put on disability for being stupid all of these years in construction over doing it, my lower back is messed up

@tammyschultz3318 8 ай бұрын

you might as well save the money, still need a hammer. Make a pallet tool, they have them in youtube video....just a long bar with like a fork at the bottom with 2, it just sits under the pallete board and you pop it right off. goes real fast

@ravenelloie9115 Жыл бұрын

How would this be useful if the nails aren’t upside down ..

@sheikmydeen2217 3 жыл бұрын

You send me amazing link bro

@5oClockShadows 2 жыл бұрын

its plyers and a hammer, next

@liamblackburn4968 2 жыл бұрын

Seen another person use this as he got blisters using a punch and hammer. In his video he did it the old way and then with the gun. He actually did it quicker with the old punch and hammer! So he spent $50 to stop the blisters when he could of spent $5 on a pair of gloves 👍 every video I watch of this tool I just see a waste of money

@romlyn99 2 жыл бұрын

This tool requires a air compressor. So good if you already have an air compressor. But if you don't already have an air compressor then this tool is useless.

@rayg5445 4 жыл бұрын

Just found out this tool existed. Seems unnecessary lol

@lastingbuild1373 4 жыл бұрын

It’s a big time saver but your right, not necessary!

@Normal1855 4 жыл бұрын

It's not necessary, but it makes quick work of removing nails. We were using old fence pickets for the bottom of our deck, and using a nail remover, we got 2 dozen pickets nail free in under 2 minutes. That's nine nails per picket.

@alejandrozuniga4426 3 жыл бұрын

the struggle is real tho

@sheikmydeen2217 3 жыл бұрын

Bro I want gun

@MrPerito777 2 жыл бұрын

So no matter what we still need the hammer or nail puller because this tool doesn’t remove as it’s advertised this tool should be called nail pusher 😂 it doesn’t work to remove a nail from a 4x4 lumber

@rwkde 3 жыл бұрын

If you already have a hammer to pull the nails from the front side, wouldn’t it be just as easy to use the hammer to drive the nails out from the bottom side? No compressor, no hose.....