Thanks for watching and commenting I appreciate it

Thanks for watching and commenting, I recently became a TFL and ZTW dealer and plan on making some high performance boats available RTR for people that do not want to go through the trouble of building their own rigs.

@@naveda08 Hey that's cool! I don't mind doing a build its all about the price for me. If I can buy it cheaper with the setup I want than buying everything separately that sounds good to me!

@@stevesballisticrc8770 Will def be cheaper to have it made to order how you want it than trying to piece it all together yourself and source all the parts separately. Shipping alone will take a good chunk off the build budget as I am sure you already know lol. Feel free to contact me at naveda08@gmail.com

Its definitely on a different level my brother, tnx for your continued support

Running good on 10 lets see how she handles that for now. I know she got more than 72mph in her with the 10s twin set up but need to do a lot more running to get her dialed. tnx for helping me out yesterday bro

Tnx for watching and commenting man I appreciate it

Thanks for watching, ended up getting a carbon fiber version as well. LOVE this larger boats

@@naveda08 Yes Sir , I love my 58 in

Thats awesome man, 1000kv? seems a bit high kv rating for 12s. how long did you run it on 12 and what temps did you see after? Thanks for watching and commenting

@@naveda08 Yes, 1000 kv. Was just an short run. The lake wasnt big enough for the boat. I got really impressed with this boat. Takes a while to take plan but once it goes is unbelievable fast. I didnt check temps since I was just checking the boat on first run but it was insane. I am still going to put extra water intakes on the boat. keep up with your good work on the genesis 56 and dont forget to put the videos here mate. Really would like to see yours ripping on 24S Take care!

@@naveda08 12S is not an issue for that motor. Run that in some of my MHZ boats. You just need to be aware of how you prop it. But remember that you have two motors sharing the load of the boat, and that means a lot when it comes to amp draw. Try a set of 50 or 52 x 1.9 de-tounged two blades. Will settle the stern nicely and still run with 12S on a cat like that.

@@AB-80X Thanks for watching and commenting. I assume you are not a subscriber by the content of your comment, pls consider subscribing. Yes you are correct, that was just the maiden here are some more recent clips with Dasboata props and running on 10-12s kzfaq.info/get/bejne/rc9darKS3snZhas.html kzfaq.info/get/bejne/mMeYfLyh1JbFYXk.html Thanks again for watching and commenting I appreciate your time

Thanks my friend, I’ll try the 12s soon and then throw the ZTWs in there later. What do you think about prop sizes for this thing? Comes with 4818 tri props 🤔

@@naveda08 is it 56mm motors ?

Ohhh i see they are, i would for sure go with something like ABC 2115 or 2215 :)

@@EmilWilkensRC yes 5684 1000kv

@@EmilWilkensRC cool tnx for the reply man I appreciate it. she hit 80mph today on the stock setup with the 12s I am pretty stoked

Hey thanks for watching and commenting man. I’m trying to get this TFL dealership noticed so I figured go big or go home lol. Hope weather cooling down over there so u can get back out and share some more footage.

Yeah buddy! Tnx for watching

Tnx for watching and commenting I appreciate it

haha definitely tnx for watching and commenting I appreciate it

lol let the natural selection take its course these 56inch boats ain't for kids anyway lmao :D I put down twin 10s on the video but I will make sure my customers know what their specific boat build can handle. shes done 80 so far all stock but I am not really speed run focused, I'm more of a laps and bashing fan. Tnx a lot for watching and commenting

I know but no one reads the fine print.... I did see that video, went 72 and 80 but knowing what it could do on 6s or 8s would give you a better idea if there is more left in it at higher voltage, I know it's not fast on 6s but it would be good to know for calculation purposes. Did I mention that your footage looks super awesome, I would like to know more about that too.

@@secretsquirrel1942 Ok I see what you mean, I can get a couple readings on 6s but I do not have two 8s setups are the same to be able to run on this(5000mah set up and a 3200mah). Im guessing about 30-40 maybe, the stock tris do take a bit to get her on plane from the hole. Someone was going to buy it but seems like they flaked out so I will take her back out for a rip soon. Original plan was to replace the TFL PM 300a for ZTW SEAL 300a but I think I am saving that for the Carbon Fiber 56inch. Have you maiden your 56 yet?

That's normal, the 37" was for my friend but now he said its too much $ so I offered him the 56 just to put into perspective just how inexpensive the 37 is. I've had this thing for about 3 months but I literally just took it out the box yesterday. I had the same plan except swordfish but I'll just try the stock ones instead they might be OK as long as it's kept under 300amp.

​@@secretsquirrel1942 Hahaha I would have liked to see his face when he learned the 56 ticket lol I def was impressed with the performance of the stock electronics on the 56. Any ideas on props for the 5684 1000kv motors? I was looking at ABC 2215 to try something different than the tri props

Tnx for watching, I took her to bigger place to try the 12s. Got 80mph kzfaq.info/get/bejne/e92We7hlqK61dGw.html

Tnx for watching bud, she’s a monster def need to take my time working with this one. Nah not loaded at all just trying to get my business going and using YT as an advertising platform. This is work for me 😀

Haha tnx for watching and commenting man I appreciate it. I honestly don't have any spare hulls laying around for sale. Any hull that you want I can acquire or have made to order for you. They do handle very differently so I understand where your coming from. Pls contact me through my business email on the About section on my Channel page and we can talk about a hull for you

Nice thanks for watching! I have a carbon fiber version as well kzfaq.infoxUP3UElvVUw?feature=share

I am a TFL dealer Tnx for watching

Regular 4818 tris, nothing special. It’s much much better with the custom Dasboatas, done 91mph and will def go faster

Thanks for watching and commenting, the prop info is the description 4818 CNC Tris not the best just the stock props. kzfaq.info/get/bejne/rc9darKS3snZhas.html custom props from Dasboata is the best choice in my humble opinion

@@naveda08 Thanks bro that genesis was insane!!

@@harveytorres3742 Thanks man, if you are ever interested in any TFL product pls don't hesitate to contact me. I am TFL dealer out of New York

@@naveda08 sorry.. I would like too bro, but I'm from PH

@@harveytorres3742 not a problem, it ships world wide straight from the factory. Thanks again for watching

Thanks for watching, I am a TFL dealer in NY. These boats are made to order, you can contact me on my business email provided in the About section of my Channel page. You can also contact me through IG, link on my Channel page banner