Top Bulldozer Tips & Tricks

Рет қаралды 160,034

3 жыл бұрын

I had a request for a bulldozer tips and tricks video so I decided to combine it with a how to operate a bulldozer video.
So we start out by looking at the machine. We'll go over the configuration of the dozers and types of blades. We'll then go through all the things we'll do if we were to run the dozer for the day (checking fluids, where to grease, etc.)
Then we'll move into the cab and go over the controls. From there I'll give you my tips and tricks on how to run a bulldozer!
Comment below with any questions!
Down & Dirty Playlist:
• Down & Dirty Series
______________________________________
MERCHANDISE
Check out our website
dieselandironproductions.com/
______________________________________
______________________________________
SUBSCRIBE
New videos, updated weekly
kzfaq.info?sub_c...
______________________________________
______________________________________
SWEAT & GRIME PODCAST
Spotify
open.spotify.com/show/3AXw8L1...
Apple
podcasts.apple.com/us/podcast...
Captivate
feeds.captivate.fm/sweat-and-...
______________________________________
______________________________________
FOLLOW ME
Facebook: / dieselniron
Instagram: / dieselniron
______________________________________
______________________________________
AFFILIATE LINKS
Gear
kit.co/DieselandIron/diesel-iron
Diecast Models
kit.co/DieselandIron/heavy-eq...
______________________________________

Пікірлер: 245

@1summitcity 2 жыл бұрын

Bro you really are a good teacher! I have been running a dozer, excavator and other equipment for years. I get really frustrated running a dozer sometimes seems like i get doing the same work to get it right. I am learning by watching people like you THANKS AGAIN !

@DieselandIron 2 жыл бұрын

I really appreciate the kind words! Thanks for watching and let me know if there's something you'd like to see

@laurabrock1249 3 жыл бұрын

I operate a 750k everyday building roads for draglines and working on ditches. Great video, seat time is key. I feel I learn everyday and I have over 10,000 hours of seat time.

@DieselandIron 3 жыл бұрын

A 750K seems like a tiny machine to be working around draglines! That dozer must look like a toy. Thanks for the comment Laura, I totally agree. It doesn't matter how much seat time you have, you're always picking up new tricks and discovering ways to improve your technique.

@antoniocalles4906 3 жыл бұрын

I started operating a dozer when I was 16 yrs. it was an old on a D8 cable model with a pony motor to start it, I grow into a J.D. 450 C w/dual slopeboards and became an owner-operator for 27 yrs. did a lot of finish work on slopes an fine grade etc, I am now 66 yrs. old and have trained a lot of dozer hands in my time and believe that evey operator should start on the biggest, oldest, sloppiest/loosest dozer you can find the work and your way down to a small toy/dozer because as you know the smaller the harder to operate. However the way you explained the operation of a dozer in you video was the same way I would explained to a green horn but most of all the statement you said " its like riding a bike you once you find level you will never lose it" a very true statement and I still use the bubble in my ass today as I go and play in the dirt part time, Therefor my (HAT IS OFF TO YOU) for educating up coming dozer hands

@DieselandIron 3 жыл бұрын

What I'm gathering is you were an operator back when you really had to operate! Those old dozers had more levers and pedals than I'd know what to do with. Thanks for watching and I appreciate the support!

@olegvilde5474 3 жыл бұрын

Awesome video!! I own a dump truck, been around heavy equipment for last 20 years. Always wanted to get in a dozer. I can watch your videos for hours. Really great job!!!

@DieselandIron 3 жыл бұрын

Thank you so much! I really appreciate you watching!

@WORKS321 3 жыл бұрын

Just my two cents, but I was taught to always grease at the end of the day while you're fueling and cleaning tracks. As all of the fittings will be warmer and take grease easier. And it is a good idea to look the machine over after work the same as before working. Definitely some great information. Setting grade with such a short wheelbase is a real challenge, anyone can hop in a D8 and push fill all day, but working the dozer is truly an art. Good tips for newcomers, but like you said there is no training like on the job training!

@DieselandIron 3 жыл бұрын

Great point. I should do a video specific to this topic because there are definitely two schools of thought. I think at the end of the day as long as the machine is getting cared for you are doing your job as an operator. I personally liked greasing at the start of the day because the machine needed to warm up anyway and I was fresh. I wasn't rushing through it to get home quicker but that's just my personal preference. Thanks for the comment, I appreciate the feedback!

@seanmcdannel5919 2 жыл бұрын

Only issue is what if some one else may be running it the next day or some one else ran it the day before. im always for greasing in the morning so before it runs i know its got fresh grease in it. If no one else runs the machine than you, then sure end of day can be a good idea.

@adekunleakinola1028 2 жыл бұрын

That's good idea

@04tsxpower Жыл бұрын

Not anyone can in dozer and push all day.

@hoboonwheels Жыл бұрын

So, I talked my way into an operator position out here in the oil fields of West Texas and am going through orientation now. Of all the equipment a dozer is what interests me most. I’ve operated a bit here and there in the past, in loaders and skidsteers, but only operated a dozer once for about five minutes haha. I truly hope I can get into a dozer sooner than later and don’t get stuck in a loader. No offense to loader operators lol. Anyway, I’ve watched a ton of these style videos over the years and have to say, nobody comes close to you. Your teaching skills and ability to explain things are really admirable. Thanks!

@DieselandIron Жыл бұрын

I appreciate the compliment! I hope you get your dozer seat time sooner than later brother!

@hoboonwheels Жыл бұрын

@@DieselandIron so far just a roller for me haha. Long days!

@ambitiousdirtwork 3 жыл бұрын

Appreciate the good content💯 keep the “how to operate” series going good for upcoming operators.

@DieselandIron 3 жыл бұрын

Thank you! I'm hoping to slowly work through all the machines as I have access to them. Thanks for watching!

@marinemp100 Жыл бұрын

Just finished a heavy equipment training school and I find you videos very helpful and interesting thanks

@DieselandIron Жыл бұрын

Thanks for watching, I really appreciate it! I'm glad the videos are helpful. Now that you're done with trade school, are you job hunting?

@wadeeubanks8435 Жыл бұрын

Dad just bought a 2015 CAT D6T LGP a few months ago and I’ve been trying to soak up as much information on it as possible. It’s got about 5,100 hours on it, pretty clean unit and I want to take care of it. Your videos have been very helpful! We have landforming tractors and excavators and I run all of that, but I’ve never ran a dozer before. I didn’t even know what LGP meant until I watched your video lol.

@DieselandIron Жыл бұрын

I'm happy to help! Let me know if you've got questions!

@sovereignfalcon1119 2 жыл бұрын

Thanks so much, Man! I’d previously only run them a little bit (two older D3’s) and I’m back to dirt work again after 15 years, so this was super reassuring to some of my theories on what was frustrating me today & also what I’ve been (where I’ve been feeling the machine and the ground).

@DieselandIron 2 жыл бұрын

Thank you for watching and thanks for the comment! Welcome back to the industry!

@emmylou1660 2 жыл бұрын

I'm taking a heavy equipment operator course now.. can't tell you how helpful this is. Thanks !

@DieselandIron 2 жыл бұрын

Thanks for watching Margo! Feel free to reach out if you have any questions!

@brianmcmahon8524 4 ай бұрын

It is a good little Doze!!!

@aliveoutside248 3 жыл бұрын

Gentlemen farmer here, my new to me 550G is getting delivered tomorrow... this was helpful thank you

@DieselandIron 3 жыл бұрын

That's awesome! It's always fun getting new toys! Let me know if you got any questions I can answer for you.

@kailingassett4585 2 жыл бұрын

Another tip: Don’t give up just because it’s taking a while to figure it out. Stick to it regardless

@DieselandIron 2 жыл бұрын

Amen! Great advice Kailin! Thanks for the comment!

@brandonurman8048 2 жыл бұрын

i just started today was my frist day in a dozer a lot harder than it looks

@kailingassett4585 2 жыл бұрын

@@brandonurman8048 don’t give up! Very much worth the struggle.

@logan2244 2 жыл бұрын

Awesome video thank you for taking the time. I've watched it couple times and it's been very helpful

@DieselandIron 2 жыл бұрын

Thanks for watching Logan! Give me a shout if you have any questions.

@woodywoodog258 2 жыл бұрын

Fellow operator, great video dude. Seat time is key.

@DieselandIron 2 жыл бұрын

Thanks Woody! I appreciate you watching brother.

@CDewayne7 2 жыл бұрын

This is a great instructional video. Thank you so much!

@DieselandIron 2 жыл бұрын

Really glad it was helpful, thanks for watching man!

@sauceymistersausages 3 жыл бұрын

Super vid mate thanks for sharing

@DieselandIron 3 жыл бұрын

Thanks for watching!

@brandynthurman 2 жыл бұрын

Great video explained well!

@DieselandIron 2 жыл бұрын

Thank you for watching!

@robertferguson9764 3 жыл бұрын

Great knowledge and video, practice,practice

@DieselandIron 3 жыл бұрын

Thank you! That's exactly it. Nothing beats seat time in this industry. Thanks for watching!

@1henex11 7 ай бұрын

Shout out from Novi! Thanks for your videos I'm looking to get into the industry and your videos are extremely helpful.

@DieselandIron 7 ай бұрын

Thanks for watching neighbor! Reach out if you've got questions!

@jeff7764 3 жыл бұрын

I’m really great grading with a track loader but honestly don’t have that much time in a dozer Great video, this helped me out a lot

@DieselandIron 3 жыл бұрын

Thanks for watching brother

@wesleyboas9743 3 жыл бұрын

If you are great at grading with a track loader, you would be a Picasso in a dozer in no time.

@roberthillyer2888 3 жыл бұрын

When pushing forward with angled blade, when you back up at end of your pass, reverse the angle of your blade fully to opposite direction. Move over half blade width so furrow is in the middle if the blade. Put the blade in FLOAT position. This will fill in all small dips made from the original push. A 72 year old an taught me this. He told me two things. 1.) use the blade on both passes, 2.) if you don't get a dozen stuck your not pushing it to its full ability. I do like your videos !

@DieselandIron 3 жыл бұрын

Thanks for the input Robert and I appreciate you supporting the channel brother!

@stevengibbs4152 2 жыл бұрын

Robert, you are the first person I have seen on KZfaq to to explain that technique. I have been doing that esp, when finish grading. Cuts time down considerably.

@CodeineRadick Жыл бұрын

Back blading is a cheaters move. :P

@ConstructionMachineryChannel 3 жыл бұрын

Well done bud, I'm ready to operate a dozer 👍🏻

@DieselandIron 3 жыл бұрын

Thanks! I'm going to try and work my way though the machines with similar videos.

@ConstructionMachineryChannel 3 жыл бұрын

@@DieselandIron Cool, looking forward to some more.

@joselopez8617 3 жыл бұрын

Great video thanks

@DieselandIron 3 жыл бұрын

Thank you for watching!

@reedburke7762 2 жыл бұрын

I love this video. Thank you!

@DieselandIron 2 жыл бұрын

Thank you for watching and commenting!

@samsamson3623 2 жыл бұрын

Thank you Sir!you are a good teacher

@DieselandIron 2 жыл бұрын

Thanks for watching Sam!

@bunk822 Жыл бұрын

Great tutorial

@DieselandIron 10 ай бұрын

Thanks for watching!

@brendanjackson2416 5 ай бұрын

Well done

@lancekikumoto1172 8 ай бұрын

Great Video! 👍 Much Mahalos!🤙🏾

@DieselandIron 8 ай бұрын

Thanks for watching!

@hudz32 3 жыл бұрын

Best video I’ve seen for beginners!

@DieselandIron 3 жыл бұрын

Thanks Chris! I appreciate the kind words.

@hudz32 3 жыл бұрын

@@DieselandIron not a problem. As a fairly new operator I can say you’re spot on with taking your time and don’t get frustrated. The only way to get better is seat time without a doubt!

@DieselandIron 3 жыл бұрын

@@hudz32 amen to that. Seat time... And lots of it!

@hudz32 3 жыл бұрын

@@DieselandIron I got to learn on levees and cutting in slopes!😂 talk about crash course! Still nowhere near expert. Another big piece to me learning is being a sponge and soaking up tips and knowledge from the experienced operators. Stay humble and willing to learn.

@DieselandIron 3 жыл бұрын

@@hudz32 cutting slopes is not a beginner task. You are 100% correct. Never stop learning. There is way what is too much to learn in this industry to ever think you fully get it and you are above learning. Humility goes a long way in this business

@DaleDirt 3 жыл бұрын

Awesome , Thank you

@DieselandIron 3 жыл бұрын

Thanks for watching!

@logan2244 2 жыл бұрын

Off or Ingage!! I'll remember that, 40 years old and every single time I assume o is on!! Thanks learn something new every day

@DieselandIron 2 жыл бұрын

Haha happy to help! Hopefully this will save you some irritation 😂

@logan2244 2 жыл бұрын

@@DieselandIron I just picked up a dresser TD7e with a slope board and rippers. I only have a couple hours seat time and I really was surprised how difficult it was to operate and frustrating. Being a professional operator who has never run a dozer or blade I still thought I would have it mastered in a few hours🤣 Lesson learned, about to go get some more seat time and push some dirt!! Dozers are awesome machines.

@angelaginn5822 Жыл бұрын

Super video! My GPS is topcon and I don’t have the double button for adjusting on the fly like you have but that’s really great because I have to turn off my gps and remove junk material or add fill . Maybe Deere will add those !!

@DieselandIron Жыл бұрын

The GPS market is pretty competitive right now so it wouldn't surprise me at all if Deere modifies its design.

@roypeck2969 2 жыл бұрын

That was a great video

@DieselandIron 2 жыл бұрын

Thanks Roy!

@fabtkt3507 Жыл бұрын

hello, I am a French beginner machine operator, I work a lot on caterpilar excavators and wheel excavators, I watch your videos very carefully, they give me a lot of info, I learn a lot with you, continue and thank you for it is really great, my dream is to come and live and work in the United States, me little French :) see you soon

@DieselandIron Жыл бұрын

Thank you for watching and thank you for the feedback! Feel free to reach out if you have questions!

@jonathangoglin4047 Жыл бұрын

I’ve always called it wash boarding but tomato tamoto lol. Agreed tho. Dozer is one of the most patient demanding pieces of equipment when starting

@texp87 Жыл бұрын

Growing up on a farm and dad operating a logging business. He always said you need to operate from the "Seat of your pants". So I'm teaching my kids to operate and they get sick of me saying that🤣. Great video

@DieselandIron Жыл бұрын

In a dozer especially, that's the way you do it! It's all about feel!

@04tsxpower Жыл бұрын

Good video. Currently running D10 and struggling with those rocker controls for for direction. I'm in control with a handle control but man sure getting frustrated with this new set up.

@DieselandIron Жыл бұрын

Every time you get used to something in the industry they go and change it!😂

@blackscoped 3 жыл бұрын

I run a brand new D5 High track dozer with 350 hours on it pushing over 150 loads of sand in a day on my new job, but, I only have about 40 hours of experience on a dozer. (I am a loader operator mostly) so thanks bro

@DieselandIron 3 жыл бұрын

You got it Florida Man. Try to stay out of trouble, we are all rooting for you 😂

@blackscoped 3 жыл бұрын

@@DieselandIron haha thanks I need any help I can get 😂👍

@jimmy4x4socal44 3 жыл бұрын

@@blackscoped my first day running a D6 is Monday 👍🏻

@kincetown 8 ай бұрын

🎉🎉Thanks so much!! I also like the "O & I" how yuh do it. I always learn so much from your videos.🎉🎉

@DieselandIron 8 ай бұрын

I'm so glad they're helpful, thank you for the support brother!

@moisesgodoy4369 2 жыл бұрын

Thank you so much

@DieselandIron 2 жыл бұрын

Thanks for watching!

@waynevincent5448 3 жыл бұрын

Great series you're putting out. Quick question: If you were going to mount a single laser receiver on a dozer blade, would you want it in the center or on the end, keeping in mind that it will be mounted high enough for 360 degree reception, and there will be a remote receiver in the cab. My thought is to put a crown on a long driveway, I could just mount it on the end, and lower my end to get my percent of slope for drainage. But, I also think in the center would be a bit more accurate for flat work. Your thoughts?

@DieselandIron 3 жыл бұрын

Thank you! I would advise you put the mast in the center of the blade. That's pretty much standard practice. A lot of those systems will come with a pitch and roll sensor that will be able to determine cross slope as well. That will take the guesswork out of it for you. At the end of the day you could easily mount a level in the cab that would indicate your pitch from left to right. Thanks for watching and thanks for the comment!

@Wayekxyzz. 8 ай бұрын

good video, friend, I have worked operating a D10t bulldozer for 5 years, working in dirty terrain, neat no need to carry material and then push it into the hole of the crushing machine, today I was moved to the area from previously carrying a Komatsu D65p, the job is to make the area neat and there were a lot of mistakes operating the bulldozer and it made me frustrated today

@DieselandIron 7 ай бұрын

A lot of guys who have gotten all of their dozer experience in the bigger machines get frustrated when moving to the smaller track bases. You don't realize how helpful the longer track base is until you don't have it anymore. Give it a little time and your brain will adjust and you'll be blading smooth again.

@downfour47304 3 жыл бұрын

You’re on point with taking it slow. In a dozer slower is actually faster.

@DieselandIron 3 жыл бұрын

Thanks for the feedback! I agree, slower is faster. It's easy to feel pressure to go fast as a new guy. It's counter intuitive to slow down.

@downfour47304 3 жыл бұрын

@@DieselandIron I still catch myself doing that. I’ve been in the trades for some time now. Jack of all trades. Master of none! 😂😂

@DieselandIron 3 жыл бұрын

@@downfour47304 I'll second that! I still occasionally have rough days on the Dozer where I cannot carry grade to save my life and I have to slow myself back down

@ed-bl4xh 3 жыл бұрын

I ran a grader , loader and scraper. But damn dozers i never could do. They are tuff

@DieselandIron 3 жыл бұрын

It is a very different animal, that's for sure. Thanks for watching!

@ryanfernandez274 2 жыл бұрын

thank you

@DieselandIron 2 жыл бұрын

Thanks for watching!

@misterbeans6064 3 жыл бұрын

This is not the first time I’ve heard someone say “I drive with my ass” and it’s hard to understand if you’ve never experienced it but once you get the feel of it then the understanding falls into place and in the end (no pun intended) that’s the easiest way to explain it to someone else. Good job on elaborating on it a bit more though 👍

@DieselandIron 3 жыл бұрын

Thank you! It is one of those things you don't really understand until you've done it.

@benkenobi671 2 жыл бұрын

"Ass Level" is something you need to be able to do in a skid-loader when grading as well.

@richardchavez9423 3 жыл бұрын

I just subscribe been watching ur videos for litle over 2 hrs straight Im a new dozer operator and u r right about getting frustrated I guess I beter work on my patience, good stuff Ill continue watching more videos🤘🤘🤘

@DieselandIron 3 жыл бұрын

Thanks for the support Richard! Stick with it, this is a skilled trade. If it was easy then everyone would be doing it brother. Let me know if there is a topic you would like me to cover and I'll do my best to make a video on it.

@richardchavez9423 3 жыл бұрын

Thank u senor keep up the great job

@just_ray.8211 2 жыл бұрын

Ignition starts with an I!🤣👌

@DieselandIron 2 жыл бұрын

Good point! 🤣🤣

@stacyp4534 Жыл бұрын

First rule - it’s just dirt you can’t break it Second rule - who cares if you take a little too much just put some back Third rule - no 2 operators are the same Fourth rule - if you reach the intended final result there is no right or wrong way to get it done Remember every operator does things different. They aren’t wrong they are different. A person may have a bad knee he will be different, a person may be left handed so they may favor backing to the right or left, a person may have a bad neck so they favor a certain side. Nobody is wrong. If a trainer says you have to do things exactly like they do find a different trainer.

@DieselandIron Жыл бұрын

All great points! Thanks for the comment Stacy!

@WhoCares-wo2oc 6 ай бұрын

Dozer is the hardest machine I have ever been in. It took me 5 days of 8 hours to get slightly comfortable and stop making humps.

@DieselandIron 5 ай бұрын

She's a hard machine but once you conquer it you will love it. Doing finish work in a dozer makes you feel like Bob Ross painting some happy little trees.

@JimBloggins1 Жыл бұрын

I've always wanted to attend a heavy equipment school and pretend like I don't know what I'm doing for 5 minutes before running the gear like a champ just for fun. Pro tip; regardless of whether you have a 6 way blade, the direction of travel makes a HUGE difference in how you carry material. Instead of turning around the house in a big sweeping motion, orient yourself through the pile straight to where you want to go. Trench push by taking the material in front first.

@DieselandIron Жыл бұрын

I can't tell if the first part of this comment is a dig or just an observation. For the second part of your conversation, you are spot on. You will be far more effective getting lined up and pushing in a straight line when slot dozing

@JimBloggins1 Жыл бұрын

@@DieselandIron not a dig, just a rich fantasy of mine after a long time of operating. I would also suggest with those John Deere machines that the faster you run them the better you can be. Especially in heavily sandy materials. The blade can move exceptionally fast on them in comparison to Cat 6s and Komatsu 71s. With a Cat 6, feathering your decelerator while in 2nd gear works well. When in a Deere I run them about 2.5-2.7F and handle the blade as fast as I can. Once you get up into a D10 you'll find that the blade is surprisingly fast for the size of machine and having that experience in the smaller machines makes a difference. Slot pushing is the key to every successful dozer operator. I slot push everything, all the time. If I have a 100 ton pile of material and a D6 I'll climb the pile and start hogging out from the front every time instead of taking tiny bites off a side. I even employ this with 400 ton piles and a D10 as swiping just takes too long. I've been mining and doing heavy civil for about 15 years and I've been in just about every situation you can find with a Dozer.

@michaelmccaffrey2731 3 жыл бұрын

I for ignition, don't forget to check the transmission oil

@googlemustdie 3 жыл бұрын

Great content! Uh, that's ZERO for OFF and ONE for ON. It's binary, universal on/off indicator. Again, much respect and really appreciate your sharing and very well done videos.

@DieselandIron 3 жыл бұрын

Thank you for watching and thanks for the compliment. I must be really slow. I've grown up around computers and technology my entire life and dabbled in a small amount of coding yet until I read your comment, that never occurred to me...😂😂

@carrollsanders9376 3 жыл бұрын

Almost all main switches are Right on, left off. Experienced opperators already know that.

@googlemustdie 3 жыл бұрын

@@carrollsanders9376 and assumptions like that get people killed. That's why they are labeled.

@carrollsanders9376 3 жыл бұрын

@@googlemustdie Show me a main power thats not the standard?

@googlemustdie 3 жыл бұрын

@@carrollsanders9376 You yourself said most, not all. And honestly, you insulted the video producer by suggesting he is not a experienced operator. If you don’t have something nice to say, don’t say anything. This producer is a guy trying to help people get into the business. That’s all I’m gonna say about this.

@twoturbo468 Жыл бұрын

That’s so weird- I am a novice dozer operator with a HD7 Allis and what took me probably 50 hours of run time behind the sticks figuring it all out myself, you just said in the first 5 minutes! I finally inured out, I needed to just trust my ‘ass’! And constant bumping the hydraulics for blade micro management! Those 2 things I’ve found out have made the biggest difference in maintaining the grade you need.

@DieselandIron Жыл бұрын

All of this advice has come from thousands of hours in the seat. I can give people a head start but it still takes putting in the hours. Thanks for the comment!

@Joe-xj2tb 4 ай бұрын

Ive got two day runing a dozer im making a road its 3.5' higher than the base ground these trucks are bringin in mud/clay boulders not dirt not sand i get it pretty level and i go to push the truck load & all of a sudden the dozer takes a fkn nose dive and fks up my last run now ive gotta backdrag to try to fix it yet it takes another nose dive wtf am i doin wrong? Thanks for the video this is the first one ive seen, P.s i have zero training didnt even know what one was when i heard people talkin about'em i worked ultra deepwater drill for 20years and never have done any heavy equipment operating except the equipment on the rig, Preciate the video

@mannyrodriguez8926 3 жыл бұрын

Can you make a video on bluetopping...specifically how to set hubs to subgrade..

@DieselandIron 3 жыл бұрын

I've got a video on grade stakes and setting grade. Have you had a chance to watch those? Let me know if that leaves you with some questions and I'll try to do another one specifically on bluetopping.

@mannyrodriguez8926 3 жыл бұрын

@@DieselandIron ill have to look for it..thanks

@mannyrodriguez8926 3 жыл бұрын

I cant seem to find it...could you send it to my email?

@DieselandIron 3 жыл бұрын

@@mannyrodriguez8926 kzfaq.info/get/bejne/ocqqlrhyzLuYlmg.html

@DieselandIron 3 жыл бұрын

@@mannyrodriguez8926 kzfaq.info/get/bejne/rN6mh6-r19G4l5c.html

@farmerjoebrown2189 2 жыл бұрын

O for open, line for closed breaker

@46rambo49 2 жыл бұрын

O for operate I for in motion, always check your DATES on the filters and know their time frame to change, if you have an older machine the lube points may not be visible, sooo we have copies in the cab laminated. I'll take my new D5 high wheel, sweet machine

@DieselandIron 2 жыл бұрын

All very good advice. Thanks for watching and thanks for the comment.

@majmod 3 жыл бұрын

How about "O" for off and "I" for ignition?

@DieselandIron 3 жыл бұрын

I think you're onto something. My little memory trick is so ingrained now I don't know that I can switch! 😂😂

@LvDirtJunky Жыл бұрын

Looking behind you before backing is a great tip …. You should try it …

@sodreeliseu2493 6 ай бұрын

Grato pela informação

@DieselandIron 6 ай бұрын

Thanks for watching!

@danm9620 2 жыл бұрын

Canyon either tell me or make a video on how to get rid of the washboard? I've been dozing for a couple of months now and having a major problem with washboarding. I run a deere 850l lgp in a sand mine. Thanks

@DieselandIron 2 жыл бұрын

Sand is really hard to grade when you are first starting out. Due to the fact that it is loose, it doesn't offer resistance to the blade so you end up grading entirely by sight. The best advice I can give you is to slow down a little so you are making flat passes. As your skill increases, challenge yourself to go a little faster. As soon as you start wash boarding again, slow down a bit. Over the course of a couple weeks you will see a noticeable improvement on your skill. There is no shortcut on this one. This is where the skill part of the "skilled trades" comes in. This is a craft that you have to hone and the only way to do it is with hours of seat time. As frustrating as it can be, look at it this way: if you can grade flat in sand, you can grade flat in just about anything.

@danm9620 2 жыл бұрын

Actually the soft sand I don't have a problem with it's the hard dand that messes me up and I don't know how to correct it

@TylerSparks-sj7ws Жыл бұрын

Tilt/pitch your blade angle around 30 degrees. It will bridge and not have a gouge tendency

@carrollsanders9376 3 жыл бұрын

Nice work using a finnish Dozer, wonder how you would do Cutting Hard material?

@DieselandIron 3 жыл бұрын

Thank you! When you say hard material are you talking hard clays or getting more into rock?

@carrollsanders9376 3 жыл бұрын

@@DieselandIron Hard material is clay and shale, a ripper is for rock. A dozer blade only has two settings Roll dirt, or scrape and load. Roll dirt is for making Trails in woods, or cutting hard clay. Scrape and load is for finnish Grading. You carry twice as much material in Scrape and grade, but the dozer will stop in hard dry clay. In roll dirt the dozer never slows down.

@DieselandIron 3 жыл бұрын

@@carrollsanders9376 we have a fair amount of hard clay up here, that's why I was confused if you were referring to Dozing rock after a blasting crew.

@carrollsanders9376 3 жыл бұрын

@@DieselandIron hard clay move the top of the dozer blade as far forward as it will go, peal it off like cheese.

@costamileos Жыл бұрын

What brand laser/grade control are you using in this video?

@DieselandIron 9 ай бұрын

The machine with the masts was running a Leica 3D GPS system on it.

@justinkendall9559 Жыл бұрын

Ok so I’ve been running a d6T for a while with a 6 way. I got moved to a new jobsite and they had a d8T but the 6 way doesn’t change blade angles. It changes the roll forward or backwards of the blade. I’m trying to figure out what it’s best use of that function.

@DieselandIron Жыл бұрын

That's going to be your carry function. When you pitch the blade forward it will cut more aggressively. When you pitch the blade back it will carry more material and won't dig nearly as much.

@poetryinmotion-hs5cn Жыл бұрын

I is for ignition, lol .. but good video..

@DieselandIron Жыл бұрын

Fair enough...

@Keananbrickhouse 3 жыл бұрын

If you were on a medium size dozer how long would it take to strip a foot of dirt off an acre of an open field? Thanks!

@DieselandIron 3 жыл бұрын

This is a tough question due to all the variables involved. What size dozer exactly? Is it flat, level terrain or will you be pushing uphill? Downhill? What is the soil composition? Clay? Topsoil? Sand? Is it wet? There's a lot that goes into this sort of thing. Just a total off the top of my head guess I would say you could knock it out in 10ish hours. Maybe 2 days worth of work if conditions are working against you.

@virong6017 Жыл бұрын

รุ่นนี้ใช้ดีทำงานเร็วมมาก

@reidkelecius6801 2 жыл бұрын

Is it true if you are good at grading with a skid loader it’ll be easier on a dozer?

@DieselandIron 2 жыл бұрын

It does help in several ways. You learn to anticipate adjusting the blade as you track forward over ground you've already graded. You also learn how to pitch the machine to assist in grading. These are all skills that help in a dozer.

@obizzil 2 жыл бұрын

I operate a Cat D9T and have for a few years but I can’t seem to get the dips out when i push grade, sometimes it works out sometimes not i rolled my cutting edges forward and that seemed to help but it still happens, any advice?

@DieselandIron 2 жыл бұрын

Rolling your blade forward is going to help you cut in while rolling the blade back is going to carry material. To get the dips out you just have to spend time really working at it. It is one of the hardest skills to attain in a dozer. The biggest piece of advice I can give you is to just slow down a bit. It's hard to do but you need to get good at grading flat before you increase your speed. Once you start getting the hang of it, bump your speed up a little until you start seeing dips again. Stop increasing speed and stay there until you can go that fast without dips, then increase your speed again.

@obizzil 2 жыл бұрын

@@DieselandIron 10-4 I’ll give it a try thank you

@lukeknight2247 2 жыл бұрын

Shoulda talked about working on steep slopes and learning to counteract how it likes to dig in more the more weight u have on the bladed

@DieselandIron 2 жыл бұрын

Eventually I'd like to put out a second video that gets into more advanced dozing techniques. That's where I would address working on extreme slopes. This was more of an intro video for new operators. Thanks for the comment Luke!

@jamesjones6961 Жыл бұрын

O for off I for ignition is what I remember

@jam3cb 3 жыл бұрын

How do you keep you blade steady to grade a level surface.

@DieselandIron 3 жыл бұрын

Lots of practice. That's not even a sarcastic answer, that's the honest truth. Hours and hours of practice.

@phoenixsui Жыл бұрын

The power of these machines fascinate me.

@DieselandIron 10 ай бұрын

They are pretty incredible when you stop and think about it.

@f0rdfalc0n46 2 жыл бұрын

I’ve never seen inside the newer machines. Honestly think I prefer the older dozers.

@DieselandIron 2 жыл бұрын

The new ones are nice. There have been a lot of improvements to increase operator comfort and overall efficiency.

@HardHatHammer 3 жыл бұрын

You can slow the cat dozer blade down if you look in the settings

@DieselandIron 3 жыл бұрын

You can but even in the lowest, slowest settings the blade was ridiculously fast on the K series. The d6k was the worst in my opinion.

@jesterofatlas5749 2 жыл бұрын

I know this is an old video and not sure if youll see the comment, but is there an advantage of doing it the first thing in the morning vs. end of day, other than you worked a long day and may not want to spend the time?

@DieselandIron 2 жыл бұрын

What are you referring to specifically? I don't remember what all I talked about in this video.

@jesterofatlas5749 2 жыл бұрын

@@DieselandIron doing the greasing of the machine.

@DieselandIron 2 жыл бұрын

@@jesterofatlas5749 ah, gotcha! I've always found doing it in the morning worked best for me. You already have the machine warming up so it gives you something to do while you wait. I know at least personally I struggle with getting out of the machine at the end of the day knowing that I have another task I have to do. I find greasing gets neglected when I do it in the evening.

@gusbunger6494 Жыл бұрын

How difficult would it be to turn a d6k into a 4 axle diesel switcher locomotive?

@DieselandIron Жыл бұрын

Gus, you are well outside of my scope of knowledge. I'm going to go out on a limb here and say....difficult.

@user-oc8xs7hf8j Жыл бұрын

Peace be upon you, I am a dozer driver with 20 years of experience in all technical and engineering works, looking for a job

@normandube5493 Жыл бұрын

I'm a new dozer operator and struggling to keep material for a long distance, struggling to cut windros to a level as I'm working with coal

@DieselandIron Жыл бұрын

It's one of those skills that come with time. At first you don't carry the material because you are worried about going to deep in your slot so you have a tendency to leave material. Your situation will be a little harder because you are on a coal stockpile so the material isn't hard packed. In regular soil you start to get a feel for when you are cutting vs carrying. Just give it time and your skills will start to develop where you are making nice long passes.

@charlesviner1565 Жыл бұрын

To the moon 🌙 👍

@wraith0127 3 жыл бұрын

If you want to find your "level butt" faster, run a skid/track steer first. You can feel just about every little mole hill and you don't have to worry about blade tilt because you just can't. They're also smaller and if you mess up and cut a little too much, you can bucket material over to fix the mistake.

@DieselandIron 3 жыл бұрын

Great tip! Thanks for the input and for watching!

@darrentew8435 2 жыл бұрын

I believe that dozer has pilot control like an excavator, electric over hydraulic. makes the blade lever feel really loose.

@DieselandIron 2 жыл бұрын

Most of your newer dozers have gone to electric over hydraulic. It's far easier on your arm and wrist and it integrates with grade control far easier.

@smokingbluedream 3 жыл бұрын

I think those buttons that change your vertical offset on the blade control are a bad design especially on the John Deere 700/750s I’ve noticed when trying to hit the shaker you can easily switch your numbers and not notice for a while

@DieselandIron 3 жыл бұрын

Ya, you definitely want to be aware when you hit them. That is a costly oops... In the case the blade shake is disabled when in gps mode so there's no reason to accidentally hit the buttons.

@smokingbluedream 3 жыл бұрын

Diesel and Iron damn on a 750 Deere the shaker works but that button works too unfortunately being a gradechecker I don’t run much but Gps lol but I have found it easy to hit it when running a machine maybe because I don’t spend everyday on one

@DieselandIron 3 жыл бұрын

@@smokingbluedream ya you get a really good feel for when you actually depress the button. It will also show up quick if you are close to grade and the dozer doesn't take a pass like were expecting.

@smokingbluedream 3 жыл бұрын

Diesel and Iron I learn a lot from working with talented operators like yourself everyday doing grade you see who can carry it from station to station not just hit it once every 50 feet. just watching what moves they take at certain times helps out a lot whenever I get to get on a piece of machinery

@DieselandIron 3 жыл бұрын

@@smokingbluedream that's a great way to learn techniques that work well. Operators all have their take on what works best.

@SubnormalSwine Жыл бұрын

I for Ignition

@pursang101 3 жыл бұрын

I used to back up in 3rd gear years ago when i could still walk like a humen being.

@DieselandIron 3 жыл бұрын

haha amen to that! Almost every dozer operator with a solid career under their belt has some sort of back issue. If it isn't the constant banging around it's the nonstop head turning to look behind you. Thanks for watching!

@carrollsanders9376 3 жыл бұрын

@@DieselandIron those little hidden stumps and rocks sneak up on you in high gear backing up.

@Bd212_ Жыл бұрын

I N G A G E

@DieselandIron Жыл бұрын

It's like the derp version of Star Trek!

@Evan-kj1ht 3 жыл бұрын

Hasn’t that got a 8 way blade the tilt for the blade at the top is a manual to tilt it to cut better

@DieselandIron 3 жыл бұрын

You are correct. Technically it is an eight way blade due to the manual adjustment. These are still referred to as a 6 way blade though in the industry. Thanks for the comment Evan!

@davidwilliams5808 Жыл бұрын

Forgot the transmission..... 😆

@darylcrowchief007 3 жыл бұрын

Where the heck you get them shadez

@DieselandIron 3 жыл бұрын

amzn.to/2SiDTKc They are cheap and hold up well. I'm on my 4th set

@acceleratefn4314 3 жыл бұрын

Lol, I just started excavation work for the first time, boss said he’s going to throw me on the dozer and track hoe on day 4 lol.

@DieselandIron 3 жыл бұрын

There's no better way to learn than sitting in the seat! Let me know if you have questions.

@Thehammerlocks 2 жыл бұрын

Lol the O means there is no connection, i look at the O as Off rather than use (I)as placement for engage XD, its a looped connection to keep flow of electricity out of the glow plugs im assuming lol, the (I) means you've made a connection of electricity.

@DieselandIron 2 жыл бұрын

That's easy for electrical engineers to remember. For us dumb dirt guys we have to use memory tricks...😂

@Chashmebadoor Жыл бұрын

I for ignition 😅

@Ras7685 3 жыл бұрын

The first thing to do....wash the windows . If you can't see you can't do your job . And why not used the electronics ?

@DieselandIron 3 жыл бұрын

Good tip! It's hard to operate with no visibility. I have another video where I use the 2D system to grade. It's only effective when you have a good sized area that will have the same pitch. 2D isn't good for just rough grading because of the time it takes to dial in your slopes.

@roberthillyer2888 3 жыл бұрын

" I " is actually for ignition.

@DieselandIron 3 жыл бұрын

That makes more sense than my little memory trick but now I've got it so lodged in my head I don't think I can change it!