The #1 Cause of Fuel Pressure Problems

No video

The #1 Cause of Fuel Pressure Problems

Рет қаралды 329,892

Күн бұрын

**This video specifically addresses problems with aftermarket fuel systems and does not necessarily represent problems with a stock fuel system.
If you’re having trouble figuring out why your fuel pressure is not consistent, you might start by looking at your choice of fuel pressure gauge. I’ve recently learned that these are a big problem and it’s saved me a bunch of headaches. I hope this information is also helpful to you.
Aeromotive article about fuel pressure gauges: aeromotiveinc.c...
Other Aeromotive TSB’s: www.aeromotive...
0-15psi gauge: www.aeromotive...
0-100psi gauge: www.aeromotive...
My Patreon Account: / ericthecarguy
The best place for answers to your automotive questions: www.ericthecarg...
Check out the ETCG Blog for the latest info: www.ericthecar...
Check out my ETCG1 channel: www.youtube.co...
Thanks for watching!
The Fairmont’s Hot Rod Article: www.hotrod.com/...
Related Videos
How Did The #FairmontProject Catch on Fire?: • How Did the Fairmont C...
What Really Happened to the Fairmont’s Piston?: • What Really Happened t...
Exhaust Cut Outs Give Your Vehicle a Split Personality: • Exhaust Cut Outs Give ...
Don’t Let This Happen to You!: • Don't Let This Happen ...
What Is Detonation and How Can It Kill Your Engine: • What is Detonation, an...
5 Things You Should Know When Building a Turbocharged Engine: • 5 Things You Should Kn...
#ETCGDadsTruck Build Intro: • #ETCGDadsTruck Build I...
The #FairmontProject Playlist: • ETCG Gets a New Car! -...
**Answers to your automotive questions found here: www.ericthecarg...
Social Network Links
Facebook: www.facebook.c...
Twitter: / ericthecarguy
Google+: plus.google.co...
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecar...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

Пікірлер: 311

@SouthMainAuto 5 жыл бұрын

#1 cause of fuel pressure problems at SMA.... cars out of gas....

@ericthecarguy 5 жыл бұрын

Mmm, got no gas in it.

@chunk386 5 жыл бұрын

2 Eric's is one comment!!!

@ourkid2000 5 жыл бұрын

@@ericthecarguy got'ny french fried potaters?

@digitalrailroader 5 жыл бұрын

Chunk ERICCEPTION!!!!!!, *insert Inception horn here*

@dirtbagdf 5 жыл бұрын

But the needle was on "E" yesterday and it ran

@frankp.2831 5 жыл бұрын

Eric, you need to cut off the tip (pointy part) off of the fill plug. The plug seals the gauge so that the glycerine doesn't leak during shipping. Unfortunately, if you don't create an opening by cutting off the nipple, the outside of the bourdon tube, the part that changes shape as pressure inside it changes, has no reference to atmospheric pressure which is what you're measuring fuel pressure against. If there is a pressure build up inside the gauge case for whatever reason, the needle will indicate a lower reading than if the gauge mechanism was exposed to atmospheric reference pressure. I.E, 9 psi fuel pressure will indicate as 6 psi on the dial if there is a 3 psi pressure build up inside the case. I've seen this problem many, many times in industrial applications, especially in lower pressure ranges like is the case in your application.

@robertfranklin7040 2 жыл бұрын

Aha!!!!! interesting! explains why the cheapo liq-filled gauge I used on my 91 Storm never acted up on me. I swapped out the glycerine for mineral oil because the provided expansion space was way larger than it should've been & I couldn't find glycerine with which to bring the level up to spec. I decided to push things & leave a smaller bubble for aesthetics, *installing a rubber expansion tube I dyi'd onto the gauge* . I left it open ended & *LOOSELY* packed with a bit of cotton ball to keep out contaminants. Maybe the mineral oil helped as well?

@slowcountryboy476 Жыл бұрын

Good point.

@KENARDO 5 жыл бұрын

To be clear, the issue isn't that the gauges are liquid filled, but that they're liquid filled _and_ sealed. Vented, liquid-filled gauges exist- Aeromotive manufactures them- and they solve both the case pressure problem and the shock/vibration problem. But, as ever, excellent tip for people with modified fuel systems to look out for. Thanks for the resources, Eric!

@markjordan4994 5 жыл бұрын

I've only ever had two problems with fuel pressure. One was caused by a bad fuel pump. The other was due to the absence of fuel. :)

@pantherplatform 5 жыл бұрын

Why come no start? No gas. That's why come.

@carloscoy5686 3 жыл бұрын

Would you say you had to get a full tank in lol

@Backcountry-renegades Жыл бұрын

Man. I have been fighting with my fuel pressure for months since my build. Thanks for this. Even my Holley has a rubber plug I just released the pressure and finally it all makes sense.

@lovund86 5 жыл бұрын

Hi Eric, if you want a "true" reading on a glycerin filled gauges, you will have to cut off the rubber tip on the fill plug on top of the gauge, this is only sealed for transportation. more expensiv guages in industry have a valve on top with clear markings for transport and opperation posittions. i have workt for many years on boats and have sen this a lot. when you heat the guage, the air and glycerine expands, and the pressure inside the gauge increases, dus causing the pressure to read lower than it actually is.

@HeadFlowInc 5 жыл бұрын

Jim Hand, a prominent old school Pontiac V8 builder found out the liquid filled fuel gauges aren’t accurate when mounted inside the engine compartment, due to temperature fluctuations. Jim literally just pulled the rubber plug and drained the glycerin out, problem fixed! Some times simple is better! 👍👍👍

@Trunxic 5 жыл бұрын

Definitely helpful Eric! I was actually diagnosing inconsistent pressure this past week on a built '17 Subaru STI. Sadly, the gauge wasn't the cause of the problem. (we mount our fprs and gauges on the strut brace usually instead of the engine. Helps a lot with vibration issues) Turned out it was an issue on the Venturi pump siphon/scavenge setup in the fuel tank. Installed a new Venturi pump and simplifies the system, and the pressure got much more consistent. Less pressure in the return line to the tank! Needless to say, there was a lot of "tail shaking" going on for us too

@novakenss 3 жыл бұрын

Exactly what my glycerin filled gauge is doing when hot. Drops to 2 psi and adjusting the regulator does nothing. I'm putting in a non liquid filled gauge tomorrow. Thank you so much.

@NebukedNezzer 5 жыл бұрын

Altitude affects pressure gages as well. anything that affects the pressure inside the gage will. example reduction of 1 lb of air pressure from increase in altitude(vented gage) will make the gage read 1 lb higher(approximately). its an imperfect world. we need to understand these things and not get upset by them.

@roaddog1973 3 жыл бұрын

I have the Aeromotive gauge and it does the exact same thing. The Aeromotive gauge fixes nothing.

@cyberjef Жыл бұрын

I note the proliferation of electronic pressure gauges, these can monitor oil or fuel pressure and are in the $20 range. They do require a wire from the sensor, one for battery voltage and a ground at the sensor as the sensor might be isolated from ground as it is on my old Honda.

@michaelserrano7097 5 жыл бұрын

Omg! My neighbor was talking to me last week about that issue with his 1964 mustang restoration built. Whe were blinding trusting those glycerin filled gauge.

@omarcorral2847 5 жыл бұрын

Dammit. Just got that same guage a month back. Haven't used it yet. Nor will I. I mean it is only 20 bucks, you get what you pay for! Thanks Eric! Useful information as always!

@aserta 5 жыл бұрын

A simple solution to that problem is to just use a T split and a section of braid reinforced fuel line to a normal gauge that's located in an insulated enclosure somewhere near the nose of the car. Vibrations won't affect it anymore and heat won't sway it either. Trucks have this, WW2 planes had this. There's no magic behind it.

@misterhat5823 5 жыл бұрын

Just so as long as some genius doesn't take it to the next level and decide to mount that gauge on their dash.

@nunya2814 Жыл бұрын

Thank you so much for this video and the link to aeromotive page regarding this. Everything in my entire fuel system was new, and this is exactly what was happening to me, chasing the fluctuating fuel press, actually blew a head gasket due to it being too lean after an adjustment when hot, was reading nearly 50psi, supposed to be Ford 39.whatever psi lol. For as common as aeromotive claim this is, I've asked quite a few, otherwise very knowledgeable individuals, tuners even, with really no help. But this is exactly what it was and exactly how I'd describe it to the people I did ask. Thanks again Eric, you have made a few of my all time favorite KZfaq videos. The one with you a Paul rebuilding a t5, I've watched numerous times, helped me disassemble and re assemble a few t5s myself.

@Lierofox 5 жыл бұрын

To clarify, it's not so much a problem that the gauge is liquid filled, the issue is more a matter of the gauge being SEALED and able to build pressure against the fluid within its housing which affects the bourdon tube. It's entirely possible to get liquid filled gauges that are able to be vented periodically (feasible if you vent it before taking the reading, if it's in the engine bay you won't be reading it in motion anyway.) Another option could be to modify the gauge by adding a breather tube on top to allow it to constantly be at atmospheric pressure regardless of the temperature (and help mitigate fluid loss from splashing out) As a similar concept, consider an axle breather, same concept, temperatures rise and the pressure safely vents up and out. Simplest option though? Yeah just replace the dang gauge with a non sealed unit. (This isn't directed at anyone in particular, just tossing it out there.)

@ACommenterOnYouTube Жыл бұрын

this is NOT a fuel pressure problem, this is a faulty gauge

@alundrasrt 5 жыл бұрын

Hope that You'll post a testing of this. Thanks for the tips.

@marshalparker4434 2 жыл бұрын

Eric your gauge sounds accurate. I run Fuel Pressure control. 45-100psi to be exact. It's PWM based. When cold(Pump, Injector,Lines ETC) I need less duty with higher Frequency to hit my Target Idle Pressure of 45PSI. So my X Axis is Fuel Temp Y axis is MAP. FYI I monitor Pressure with both a Needle gauge and 3 wire Transducer. I can tell you for sure. Your Pressure is indeed higher when the system is cold. That said think your Gauge is accurate. Best to isolate gauge/Reg from engine HarmonicsThanks for all you do I have been watching your videos for years.

@genericdude6551 2 жыл бұрын

I was expecting something that solves the problem on any vehicle.

@billallen275 3 жыл бұрын

On liquid-filled gauges there's a port where they are filled this port can be used as a vent to vent the pressure changes that occur. Wouldn't want to do that in a mobile for sure! Got to match the gauge to the application for sure, and that's a good idea to question your measurement device when you think you may have a problem that might not be there. Always double check your meter or gauge. Thank you great video.

@jackpatteeuw9244 5 жыл бұрын

This not just an issue with mechanical liquid filled gauges. Almost all pressure gauges, including electronic one, suffer from the similar heat related inaccuracy. Because the change occurs relatively slowly, a computer can sometimes compensate, especially if it knows the temperature of the fluid it is measuring. There are other techniques that can be used for electronics but they are all expensive.

@misterhat5823 5 жыл бұрын

What about a stock fuel pressure sender?

@zx8401ztv 5 жыл бұрын

I'm nosey, So i would take it apart and wash it out with alcohol, then refill with light oil. Just to see if it made any difference lol. I learn by taking things apart, always have.

@LeaderofStupid 5 жыл бұрын

Yeah, bit its outta warranty once you do. So if you mess up the reassembly, you won't get it replaced

@almfreak 5 жыл бұрын

Neat. I never thought about the liquid filled gauges interacting with changes in temp.

@Bige4u 2 жыл бұрын

The only time i had a non filled fuel pressure guage read steady(within 1psi) is when i had an aftermarket mechanical fuel pump and using no regulator whatsoever, it was a Carter M6900 style fuel pump for my mild build SBC back in the mid 90s, advertised at 6psi, my fuel pressure gauge needle only varied between 5.5 and 6.5 psi, no more, no less. Compared to these $25 mechanical fuel pumps as a stock replacement, advertised at 5psi(Delphi MF0001), but connect a fuel pressure gauge inline, and the needle bounces all over the place showing a much higher reading. I bought that delphi unit for my ZZ4 crate engine, i took it for a test drive, and it ran fine, i've always had the impression and also seeing it on YT that if the fuel pressure was too high, it would overcome the needle and seat, over fill the bowls and you would actually see fuel dribble out of the ventury boosters, but my holley 650(0-080783C) carburator hasnt done it, and the set floats and fuel level stays steady in the fuel bowl via the sight glass.

@plumbc007 5 жыл бұрын

just been chasing a fuel pressure problem on a ford maverick bloody fuel pumps lol

@GeneralNgo 5 жыл бұрын

You are a HERO!!! I've been chasing this problem for the past month

@nivlac978 2 жыл бұрын

Wow. I feel better. I didn't know what was going on. I was about to buy an adjustable regulator thinking mine was busted. I got other problems with my S2K but I can breath a little easier now.

@TargaWheels 5 жыл бұрын

A lot of gauges are questionable now, more than before, liquid filled or not. The problem goes across quality, price, size, etc. It doesn't seem to matter if its American made or not.

@ekummel 5 жыл бұрын

I've been chasing what I *think* is a fuel pressure issue in my Fuel injected Jeep Grand Cherokee. Whenever I take a corner at a moderate speed, and step on the gas to accelerate out of the corner, the engine bogs down like either it's flooded, or not getting enough gas...don't know what is causing this. Maybe I should put in a fuel pressure gauge and see what it's doing.

@gadget73 5 жыл бұрын

I had one of those things fail. The liquid got dark, thought it was just baked or something. Turns out I had a fuel leak into the gauge, and the inside was full of a gas/glycerin mix. I threw the gauge out and put the stock test port back on. It also would give me odd readings, high when cold, low when hot, and I went through the dance with changing parts for a while as well.

@sadakotube 5 жыл бұрын

I use this. Its notoriously inaccurate and i only use them to see if fuel pressure is on or off. The fix is actually just to remove the rubber, to equalise the pressure inside the meter. Still, not really accurate. And opting for electronic pressure sender is really a better choice

@jacobcaparaso9892 2 жыл бұрын

I cut the tip off of mine and it reads accurately and runs better than ever. I will be buying a new gauge because I don’t want the oil in the gauge to make a mess now

@stupa55 5 жыл бұрын

FYI: Really strange the article. All the glycerin gauges I came across tell you to pinch with a needle a hole in the rubber plug for the first usage. Next advice is to use the gauge in a way the rubber seal is always in the highest position so the glycerin will not spill out.

@mattp5555 4 жыл бұрын

Half the video is a sales pitch 🔥

@dw4940 3 жыл бұрын

Selling what?

@evilfbody3618 3 жыл бұрын

I wish I would of saw this a month ago because I was having issues with fuel pressure, regulator wasn’t reading properly & it would drops pressure after a while. I now have the car at the shop & im probably gonna get charged an arm & a leg to look at it when it’s probably this exact issue. SMH. Thanks man!

@GorhamWorks 5 ай бұрын

You ain't lying. Crappy gauge and being able to trouble shoot... result headache. Aeromotive make good stuff, I run their regulator, pressure gauge, and filter on my truck. Once you use their stuff.... warning... you don't really want to use anything else.

@TheAlignmentGuy_TM 5 жыл бұрын

The Alignment guy says... The most important part of using measuring equipment is knowing when your measuring equipment is lying to you. JMF TAG

@heroknaderi Жыл бұрын

Thanks for your advise.😎

@stacydornan9765 5 жыл бұрын

Thanks for the heads up Eric,I was just gonna order one for my 98 FIREBIRD FORMULA LS1

@jerryrounds8586 5 жыл бұрын

Thanks for the continued excellent advice.

@ng6585 3 жыл бұрын

I have modified the fuel hose to little bigger diameter with stock fuel pump result is always low fuel delivery and increased long term fuel trim.

@1966human 4 жыл бұрын

Thanks for reaching out, I was working on a fuel pressure problem ( low fuel pressure ) for a long time, I drained the liquid in the fuel pressure gauge and I had steady fuel pressure, however There is also air getting into the fuel line between the tank and fuel pump ( I have installed clear fuel line ), also the carburetor air filter is blocked ( making the engine rev up and down a bit at the same time the air starts coming through the fuel line ) ( about 15 minutes of idle ))

@Mr92cadi 5 жыл бұрын

I always like your videos before I even start watching because of the content in which you provide. Good luck with the new gauge

@Blown6thGen Жыл бұрын

Just got my 0-100 PSI Gauge today aaannnd of course it's leaking fluid from the rubber gasket under the pin. Thx Aeromotive.

@Mandurath 5 жыл бұрын

Huh, that's interesting, used similar old gauges on alot of cars in the past. Though I never really paid attention to them. Actually, I would have said little sisters. I had a nasty little 65 mustang, had just finished working on. Went inside for lunch. Then went for a test drive around the neighborhood and what had been running great, wouldn't go over like 2k rpm and it would choke and sputter then die. Stopped and popped the hood, my fuel line was having a seizure. My pressure regulator was set all the way down. Turned it back, thinking all was ok. Nope, ran good now but wouldn't go over like 2k. Then noticed my rev limiter was also set to the bottom. After that it was all good. She had went and changed them while I was inside.

@ericthecarguy 5 жыл бұрын

The joys of hot rodding.

@truth282 3 жыл бұрын

I've been chasing my tail on an 05 sport Trac that doesn't have a shrader valve. And the fuel pressure is reading 50 on a scan tool which I know to be low from research.

@notj5712 5 жыл бұрын

Part of the problem is you bought a house brand item. "Jegs" Who makes that?

@Idtelos 5 жыл бұрын

Myself, Charles and most bikers give their approval on your beard, Eric.

@AlanSchildroth 4 ай бұрын

Yeah! My fuel gauge is bouncing 1/2 in either direction!

@souafang7707 4 жыл бұрын

Just watched. Just ordered thier carb 0-15 psi gauge. Will see if it makes a difference. My current AutoMeter liquid filled gauge with equalizer will start to lose pressure after warm up at idle. Then will really drop when driving around from 4 to about 2 psi or less. Would have pull the equalizer pin to reset it to read at 4 psi. I’m thinking I would not have to do it every time. Losing sleep over this! Will see how this one does once received and tested.

@GoldSK96 2 жыл бұрын

I love your videos, pure mechanic knowledge

@Ronaldofmx88 5 жыл бұрын

Thank heaps mate good, would not have known

@channel_56_ 4 жыл бұрын

Keep up the good work Eric! Can't wait to see the videos with the new Acura :). Hope to start my own channel about custom motorcycle builds pretty soon and you and other KZfaqrs like HumbleMechanic, EngineeringExplained,, ChrisFix, Edd China and many more sure inspired me to do so!

@Ny_Foxbody93 Жыл бұрын

Eric Iv been chasing my tail on my car for a little while now, long story short my fuel pressure was fine and reading good, after a small incident the car started reading max fp, changes 3 differs fp gauges and replaced the same regulator with a new one, checked fuel filters,kinks and cannot seem to figure out why I can't get back down to reg fp (5-7psi) by the way this is on a sbf 302 fox

@mingscustoms Жыл бұрын

I have been chasing an issue in my rx7 thank you

@chrisostrande 27 күн бұрын

I have a clear glass filter. When the motor is not running, should the filter drain or should fuel always be present (full)?

@johnnytran4494 4 жыл бұрын

Thanks man. I wish I would’ve came across this before I replaced 2 fuel gauges though.

@AlecOdin 3 жыл бұрын

Thank you so much for this video! I have been experiencing the exact same problems. Glad to get it resolved!

@vegansaxon3962 3 жыл бұрын

Well that counts out my problem because I don't have a gauge on my crown vic...its running rough and cutting off..I check the pressure at the rail and it just shoots up a little...I compared it to my grand marquis that I just put a new pump on and it sprays out with plenty of pressure...so I thought I needed a new pump in the crown but after installing the new one it hasn't changed anything...I can hear the pump humming and shutting off like normal but hardly any pressure...beautiful Florida day here but feeling a bit discouraged....I know there is a solution

@BranMcRay 5 ай бұрын

I just put in a electric fuel pump and filter with all new lines and that regulator gauge and I’m having issues. At highway speeds if I let off the accelerator I’m losing all the fuel pressure and it eventually dies on me. Then if I wait 5-10 minutes it starts right back up. I can drive around town low rpm no problem. What could be the issue. We’ve already swapped another new pump and filter in and checked the regulator. Still having same issue. Wiring seems fine and it’s all new as well. Even got a new battery and alternator. Vented the fuel tank. Gas tank is clean.

@allenmckinney9533 5 жыл бұрын

I haven't had that issue on my 00 s10. I used a liquid filled gauge for a couple of years and it always reads 53-55psi which is where it should be and it was a cheap eBay gauge.

@trini_boi2414 3 жыл бұрын

It's been 3 months now I'm chasing this issue with my car..the fuel pressure don't drop but on the hwy the car hesitates and when I step on the gas I see the fuel gauge drop 2 to 3 psi instead of going up..I also noticed the pressure would drop significantly when I turn the key on and let the car sit for about an hour so far I heard it's the fuel regulator so I'll go ahead and change that first since it's the cheapest thing..

@RBFR01 2 жыл бұрын

so tough question. My car runs for 2 minutes and dies and wont start again and just turns over. I replaced the fuel pump, fuel pressure regulator and fuel filter and the sparkplugs are dry and the system is getting spark. Why does my fuel pressure drop to not enough? fuel pump ground?

@casanovaevren 3 жыл бұрын

I had the same problems with holley carb.it was leaking fuel and pressure dropped.u ll know when u have excessive black smoke off the exhust.also electric pumps have built in filter may get dirty.or collapsed fuel lines if rubber.😇

@closertothetruth9209 5 жыл бұрын

great info, i thought the same with the fluid filled gauges

@lilnapsak1828 Жыл бұрын

im having this same issue but with my oil pressure... same thing? I added a mechanical glycerin filled psi gauge next to my sender and its acting the same as this here.

@benoroarty4207 11 ай бұрын

So fuel pressure hasn’t changed, it’s just the gauge giving you false information, right? Could you adjust the pressure on your fuel pressure regulator on a cold or warm engine, disregarding the gauges info after it gets hot?

@sheachopper6416 5 жыл бұрын

My fuel pressure problems usualy reside once i stop eating ao much taco bell.

@tonybrown3576 5 жыл бұрын

superchopper 1996 evap issues hahahaha

@michaelserrano7097 5 жыл бұрын

My money is in a bad purge valve. XD

@michaelblacktree 5 жыл бұрын

Fuel pressure or exhaust backpressure?

@mailmanjoe 5 жыл бұрын

Do you get the large evap leak cel code after as well? Lol. 😂

@LeaderofStupid 5 жыл бұрын

Got a clog in the exhaust? Better get your exhaust valves checked

@Grande.biggly 3 жыл бұрын

I have a check valved liquid filled vacuum gauge on my fender apron that does the same thing.

@themechanic6117 5 жыл бұрын

I've only installed two liquid filled gauges on my fuel rail...eventually they vibrate so much they actually fall apart .never used one again.

@patrickdubuc3439 2 жыл бұрын

If gauge wasn't holding pressure wouldn't it being leaking fuel inside or something?that's where it's gets pressure from correct is from the fuel?

@michaelspeakman8924 5 жыл бұрын

We send back the ones that's not completely liquid-filled on the gauge. That's what the problem is.

@LoqoRL Жыл бұрын

Dude i have a 95 ram. Put a new tps, plugs, wires, battery, thermostat. After like 20 miles on the highway throttle becomes unresponsive . I have to let it sit 45 mins then it is ok.

@vijayantgovender2045 5 жыл бұрын

thank you Eric from south Africa

@danilosumbs6818 9 ай бұрын

This was so helpful, THANK YOU!!

@tonyjcool5314 5 жыл бұрын

Thanks learn something new every day.

@lilsammywasapunkrock 5 жыл бұрын

I remember being told that fuel pumps rarely fail from Eric... In a video sponsored by airtek... So far I am 0 for 5 on airtek fuel pumps. First one the car had no power, wouldn't accelerate. Stock fuel pump died at about 200k, would only push 20psi. Bought an airtek fuel pump, it only pushed 12, brand new, out of the box. The car wouldn't even start. One actually did start the car and read 40psi. Made it almost 25 miles. One didn't even spin. Again, brand new out of the box. I would say crappy fuel pumps are a bigger deal then an inaccurate guage.

@pedery2k 2 жыл бұрын

1994 Ford Explorer 4.0 V6, starts good, runs good, but consisent low fuel pressure of 26lbs. 3 different guages all read same. Replaced fuel filter and regulator. No change. KOEO reading steady 28, KOER reading steady 26. Web search says engine quits at 25. Whats the issue?

@misters2837 5 жыл бұрын

Why don't you have a "remote mount gauge" and have it in the cockpit...the Glycerin stays same temp as the inside of your car...(I actually made my own from a Direct mount, used a Trerice gauge off EBay that had the diaphragm for low pressure suitable for chemicals equivalent of gasoline) and filled the lines with very light viscosity motor oil...and viola I have a Fuel pressure gauge safe to be cabin mounted...(I wanted to use 1980s Ford Motorsport N.O.S autometer gauges that matched my build)

@CHRISINMCNEILL 3 жыл бұрын

Hi Eric. Thanks for the videos. This issue has been known for decades in the industrial gauge market. The non glycerin filled gauges suffer from the same issue but the percentages of the swings are a lot less than the liquid field due to the amount of volume consumed by the liquid versus the body size of the gauge. I have vacuum gauge is that have a little bar that you rotate that allows the inside of the gauge to normalize with atmospheric pressure this is very high quality gauge and it is non-liquid field. This issue has been going on long time, It’s just most car guys are cheap and don’t wanna spend the money on this type of stuff so these companies just throw the stuff out there and people buy it and buy it and buy it. Great videos. It boils down to you get what you pay for.

@user-lh1hd5iw7h 2 жыл бұрын

Whered you buy your vacuum gauge ?

@CHRISINMCNEILL 2 жыл бұрын

@@user-lh1hd5iw7h McMaster Carr

@MichaelGawesebmainone 4 жыл бұрын

I get F1007 and F1014 codes still searching what they mean. Somebody suggesting it may be crankshaft or timing issue, maybe crankshaft sensor, but I doubt car could be out of timing as it was not opened. Someone suggesting it’s a fuel problem perhaps too much fuel. It’s a Peugeot 207, any idea where to start? Have replaced fuel pump already, seemingly not cause.

@jahfiyah619 3 жыл бұрын

What about putting the gauge in a cool spot. I have one and i sure would hate to waste money.

@rickypanaligan6162 3 жыл бұрын

why f6a suzuki EFI A/T can accelarate w/ disconnected wiring TPS

@josephcarson8787 3 жыл бұрын

So the gauges we've used our whole lives ain't right? Maybe so. I just installed a new fuel pump,and the injectors and regulator check out good. I've still got intermittent fuel pressure too.

@djasmr7075 4 жыл бұрын

Mine fills the carb and the gauge drops to 0 and runs till the gas is out of carb will the gauge fix that?

@frekkledipped Жыл бұрын

my problem is my car, 65 gto with 3/2s, when idling smells of fuel out the exhaust. The 2 outside carbs are not supposed to produce fuel when idleing. I have removed the center carb and replaced several parts, im sure its not the center carb. It could be the Holley red f.p. installed. Im thinking of turning down the pressure fromthe pump to my regulator but not sure how to do it. Reg is new too. I adjusted my reg all the way to 0 and it didnt make any difference. Been looking for a description on how to adjust psi from the pump to my reg. cant seem to find any. Any ideas where theres info on adjusting a Holley red?

@NewYearGrandpa 5 жыл бұрын

Need new video on cleaning out engine sludge which will also cause low pressure, etc.

@JSchrumm 5 жыл бұрын

Drain the oil out of the gauge.

@AntonioClaudioMichael 5 жыл бұрын

Great article thanks for the information Eric

@MrKBujt1 3 жыл бұрын

What’s the ideal fuel pressure reading on an inline pressure gauge while the vehicle is running. Please send help… 4 Barrel Holley on a SBC 350

@firstname6165 5 жыл бұрын

im still waiting on him to mention "The #1 Cause of Fuel Pressure Problems"

@travismcallister417 5 жыл бұрын

It's the gauge. If you actually have one of those things it's the problem. Which is for like 1% of us... smh

@chrisluquette1615 5 жыл бұрын

@@travismcallister417 Actually it sounds like there was no driveability problems. Only a gauge problem.

@FrenchValleyAirport 5 жыл бұрын

Why are they still allowed to be sold if they're giving false readings. confused

@racingdreamz8021 2 жыл бұрын

I have a 2008 Chevy Equinox 3.6L, The fuel pressure is at 60 psi but needle is very erratic & the car is misfiring consistently, any idea what this can be?

@jims2507 5 жыл бұрын

I thought you were going to say "because people don't change their fuel filters"

@baddxample 4 жыл бұрын

If you have the version with the brass fitting accidentally being pulled out too far, how do you reset it as it’s fallen below zero?

@sansaechao2023 5 жыл бұрын

My needle only bounces when I'm under a quarter tank. Otherwise it's steady

@garyborchert61 5 жыл бұрын

Grèat info thanks , i am staying dirty 😉👊

@red90rover98 5 жыл бұрын

The only way that would happen is if the gauge body does not have a vent. It must have a vent..... I've used liquid filled gauges in industry for three decades and there is no inherent problem. You need to open the vent when you install them.....

@mzaite 5 жыл бұрын

You assume these are built well.