The 10 Commandments of Injection Molding

Рет қаралды 86,951

Күн бұрын

Jeff Tadin, Senior Product Development Engineer at East West Manufacturing, gives insight on the plastic injection molded processes to Design and Manufacturing Engineers who are developing or manufacturing plastic injection molded parts.

Пікірлер: 32

@smartereveryday 3 жыл бұрын

Great video

@MartinezRBA 3 жыл бұрын

Does this means that the next video will be about injection molding?:D

@samuelhe6725 3 жыл бұрын

oh didn't expect to see you here on this sub-2k views video, but hai.

@nathanlowski1789 2 жыл бұрын

Views dont equal content. This video is worth its weight in GOLD. I have it. bookmarked. There is very little intro and it is knowledge dense. This is EXACTLY the kind of video I would think to find Destin watching!

@martinramirezjr7872 5 ай бұрын

This is excellent. Thank you for producing this video!

@KurauPlastics 2 жыл бұрын

One of the recommended videos to understand about undercuts on plastic products.

@WhyTrashEarth 2 жыл бұрын

Video is amazing! Thank you so much for sharing this.

@nathanlowski1789 2 жыл бұрын

You've got yourself a sub and future customer right here. Thank you!

@sironguyen2297 7 ай бұрын

I'm woking as plastic molding design at EWI in vietnam. Nice too see You, Sir.

@adammalysz7810 2 жыл бұрын

Thank you very much. Great video

@mohamedshams8014 2 жыл бұрын

Thanks! very informative

@souravuk8587 3 жыл бұрын

Thank you for the information

@luluwong7405 10 ай бұрын

great video, thank you!!!!

@golonkadesignconsulting9179 2 жыл бұрын

Thank you so much.

@margaret.van-beyondmould3014 2 жыл бұрын

Great! Thanks!

@kuntulbiru7793 Жыл бұрын

Thank you !

@robsproducts Жыл бұрын

RE Wall thickness chart recommendations on #1, are these the Recommended thicknesses for the part to be injected, or the wall thicknesses of the mould itself?

@bhaveshmishra5629 3 жыл бұрын

very impressive

@inquisitive980 8 ай бұрын

From a P.E. With over 40 years of IM experience, great job. Now if we could just get this out to CAD jockies and software developers.

@philadams493 2 жыл бұрын

first commandment how we going to fill it ?then how are we going to get it out? thus effecting mold design, then design mold to those specifications such as flow , venting, ejection cooling, heating locking cavity to core (think of the mold base as the purse, that is carrying the most important part, the cavity, the mold base is not primary in the locking processes its to loose over all, but rather it is a subset, yet very important in locking )and all of the rules this video said

@alanzhang2600 Жыл бұрын

Yes , uneven wall thickness will cause shink mark .

@antoniocarrascopic 3 жыл бұрын

Would you mind to share this presentation? Great video and very good condensed! 👍

@plasticman3952 2 жыл бұрын

Sinking can be minimized by a slower fill rate across thicker wall sections.

@ph00n0 Жыл бұрын

I noticed having a bit longer of a cool time will help too, found this out by lowering the cooling time and having sinks behind some thicker ribs

@jess3298 Жыл бұрын

Omg check out conforming cooling lines

@plasticman3952 2 жыл бұрын

No mention of venting the mold. Add another commandment to the list.

@abcdefghijk6704 2 жыл бұрын

Traditionally they (mold makers) are "afraid" of making too much (and too deep) venting, because it can cause flashing in the brand new mold. So not enough venting is still common practice (and technicians at molding facility will correct this, during initial mold testing, in press).