The 3,4,5 Method. Marking Out the Slab! Owner Builder Series Ep 13.

Рет қаралды 46,531

9 жыл бұрын

#345method #ownerbuilder #diyforknuckleheads
diyforknuckleheads.com G’day Knuckleheads, Uncle Knackers here. In this Episode we look at marking the slab before we start cutting or assembling any stud wall frames. We take a look at how to set out the all important 3, 4 ,5, method which is a way of creating a right angled triangle so that we can run all our measurements off these two lines. Check it out!
Before l go on...
DIY For Knuckleheads Website: diyforknuckleheads.com
-------------
SUBSCRIBE to DIY For Knuckleheads and never miss a video again!
kzfaq.info
-------------
Tools l Use: diyforknuckleheads.com/tools-resources/
-------------
Mailing Address:
DIY For Knuckleheads
P.O. Box 152
Sawtell,
NSW, 2452
Australia.
-------------
Check out the Latest Swag from our New DIY For Knuckleheads Clothing and Accessorie Store!
shop.spreadshirt.com.au/DIYForKnuckleheads/
------------
Check us out on Facebook;
DiyForKnuckleheads/
------------
ATTENTION!!
Don’t Miss Out on ALL the other Good Stuff!
Click on the Link below for the Playlist containing all the HELPFUL, INFORMATION PACKED Videos in My Owner Builder Series.
kzfaq.info/get/bejne/rK9hZqSbrZzLgas.html
Music supplied by Jason Shaw at www.audionautix.com
Released under Creative Commons License 3.0.
Music Title: Banjo Short
incompetech.com/music/royalty-...
Kevin McLeod: Feelin Good.
Have a great day and l’ll see you again real soon. ☺
Cheers,
Uncle Knackers
Please Note:
All Videos produced by shaneconlan1's KZfaq Channel are provided for informational purposes only.
All the content provided is for general guidance only. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, shaneconlan1 ( Shane Conlan) cannot, and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, shaneconlan1 (Shane Conlan) will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional.

Пікірлер: 59

@grumpy_poo 9 жыл бұрын

Very well explained and demonstrated.... You are progressing amazingly...

@Xscapeplan01 9 жыл бұрын

Your tuts are always interesting and easy to understand :) Thumbs up!

@diyforknuckleheads 9 жыл бұрын

TheAusGamer Thanks mate! Appreciate the Thumbs Up. Cheers :-)

@HugotheBossArif 9 жыл бұрын

I am loving this series! I can't wait to see the finished house!

@diyforknuckleheads 9 жыл бұрын

Arif Hugo Glad you're enjoying it Arif! I appreciate your support. Cheers

@jjfkilfeather 9 жыл бұрын

It's amazing to watch your vids and I have been inspired and I understand all the work that goes into editing it's not easy and HAPPY 50K SUBSCRIBERS

@diyforknuckleheads 9 жыл бұрын

Jared's Lab Thanks Jareds Lab. Good to see that someone else knows how much work it takes to make and edit a video. Appreciate the comment mate. Cheers :-)

@MartyDaley 9 жыл бұрын

Great tips Shane. I always wanted to know how builds did that. You should put all these videos onto a DVD and sell it as a DIY Home Builders DVD. Your communication skills are clear and always to the point (and with our great Aussie humour). Great tip Knackers!!!

@diyforknuckleheads 9 жыл бұрын

Marty Daley Thanks as always Marty :-) They're probably a bit rough and ready for a DVD Set. I kind of had an idea that l'd try and do just that but there's just to much time involved in getting the audio and video up to watchable quality. Good idea though. Cheers mate

@78wesley 7 жыл бұрын

a very handy tip for all those DIYS 3,4,5 no matte what technology we have today, 3,4,5 never fails...well done...

@diyforknuckleheads 7 жыл бұрын

3,4,5 Wes...l think the Egyptians even used it! Cheer mate 👍

@jamesblanton9364 9 жыл бұрын

I look forward to each & every episode uncle K, thanks for this one mate, and i spoze i'll cop ya ron, cheers Shane and take care.

@diyforknuckleheads 9 жыл бұрын

James Blanton Thanks James. Appreciate you supporting the Series mate. Cheers

@BeowulfBuilders 6 жыл бұрын

Luv Your Stuff Uncle Knackers Stay Awesome Uncle Joe Joe

@diyforknuckleheads 6 жыл бұрын

G'day Uncle Joe Joe. Thanks for watching mate and good to see another Aussie KZfaqr out there. 👍👍

@stevecollins9450 9 жыл бұрын

Great tutorial there, Shane.

@diyforknuckleheads 9 жыл бұрын

Steve Collins Thanks Steve.

@bosnianoutlaw100 6 жыл бұрын

good explanation sir your expertise is invaluable

@diyforknuckleheads 6 жыл бұрын

Thanks mate....glad you found it useful and thanks for the feedback! ....much appreciated :-)

@FixitFingers 6 ай бұрын

Good ol' Pythagoras sticking his nose into building houses now! The bloke knows no boundaries... needs to pull his head in 🤣🤣

@diyforknuckleheads 6 ай бұрын

😂....he can't help himself

@craigminca7446 7 жыл бұрын

Cheers mate. So well explained

@diyforknuckleheads 7 жыл бұрын

Thanks Craig 👍👍🙂

@stevedockery3534 Жыл бұрын

Very good info. Thanks

@diyforknuckleheads Жыл бұрын

No worries Steve! Glad l could help 👍😁

@TheLittleGardenShedWorkshop 9 жыл бұрын

Well explained Shane. Take care, Harry

@diyforknuckleheads 9 жыл бұрын

The Little Garden Shed Workshop Thanks Harry. Hope your weeks going well. Cheers :-)

@alexmaakt 9 жыл бұрын

Hoping it isn't gonna rain for some days. Big thumbs up. Good explanation.

@diyforknuckleheads 9 жыл бұрын

alex maakt Thanks Alex. Fingers crossed mate. Cheers

@ryana2652 9 жыл бұрын

He's a superstar!

@diyforknuckleheads 9 жыл бұрын

Ryan A :-)

@robinrwilsonsauls 9 жыл бұрын

Well-one thing I do now understand-I need a well written book. Can you recommend a book to walk me through what you have stated-but that I can drag around with me-and keeeeepppppp referring back to, (over, and over again)?

@kevinchan351 4 жыл бұрын

👌👌👌

@diyforknuckleheads 4 жыл бұрын

Thanks Kevin....appreciate the response mate 👍😁

@chrisversteegen1368 9 жыл бұрын

Another great video shaneconlan1 . Can't wait to see that framing! You going to pitch and frame the roof too? Or just truss it? Also what level of tie down are you going to have on your roof? We do heaps here in WA; bolt the underpurlins, trip-l grip rafters, weld beams, straps over peri battons and long spans. Crazy! But I was curious since you're in the eastern states. Keep it up mate!

@diyforknuckleheads 9 жыл бұрын

G'day Chris. Thanks for that mate. The tie down here isn't to crazy. When l worked in Queensland for a while it was insane! Those houses will never blow away. Thanks for watching. :-)

@OneManBandWoodworks 6 жыл бұрын

Nice one Shane, always wondered how you guys got the walls square. How come they never do this on new houses?

@diyforknuckleheads 6 жыл бұрын

Thanks mate 👍

@ippolitofred 9 жыл бұрын

Nicely done Professor. Will you be doing the remainder of the build yourself?

@diyforknuckleheads 9 жыл бұрын

Frederick Ippolito Thanks Fred. I intend to most things myself. I'll get a hand when l need it like putting up the roof trusses. Cheers mate.

@scootertheeb6172 5 жыл бұрын

Good tutorial video! I am wondering if we can just ask the land surveyor to mark out the slab via his Total-Station? that will be perfectly accurate. How do you think of it? mate!

@diyforknuckleheads 5 жыл бұрын

Thanks Scott. You could ask l suppose but l personally haven't seen it done. Good luck 👍

@brothyr 9 жыл бұрын

Aren't blueprints supposed to be a cloth-base with a waterproof coating? Neighbor showed me the plans for the empty lot next door and it looked really nice. Literally blue pages.

@diyforknuckleheads 9 жыл бұрын

Adam R Haven't seen to many genuine 'blueprints' in my time Adam. I rethought they only existed in the movies :-) Cheers mate

@disconeil 9 жыл бұрын

Ayup Shane, It seems as if the site is just starting to get busy, you have made the series seem very easy so far but I realise that a helluva lot of planning and money has gone into this project already! It is all looking great and I am along for the ride, I do have one question though. Is there any reason why you (people in your area) build with timber and not bricks and mortar? I am just curious because all dwellings here in the UK are brick or stone? I am a fan of timber builds but our climate may not be the best test for it. Cheers pal. N.

@chrisversteegen1368 9 жыл бұрын

Neil George I reckon it's because he's a chippy and can do all the framing himself, which would save heaps. At least that's what I plan to do! Might still put in a brick veneer though, I know that's a council regulation in some suburbs. A lot of houses here (WA) are brick, but timber houses go up lots faster and if you can DIY, it's a bargain.

@diyforknuckleheads 9 жыл бұрын

Neil George Thanks Neil. The reason l'm doing a timber clad home is that apart from the fact that l like the look, l can also do it myself so it's a great cost saving measure. We are on an incredibly tight budget so every where we can save a bob or two we do. Cheers mate and thanks for watching.

@diyforknuckleheads 9 жыл бұрын

Chris Versteegen Spot on Chris.

@disconeil 9 жыл бұрын

Thanks alot pal, I can relate to that. Thanks fellas! N.

@yngwie66 9 жыл бұрын

You must have nice neighbours to put up without a side fence but then again they get to gaze on you all day!

@diyforknuckleheads 9 жыл бұрын

Denis Minuz G'day Denis. My old neighbour Max is a top bloke and puts up with most things. Having said that, he is getting a new fence for free when it's all done. Cheers mate.

@smilertiler1 9 жыл бұрын

3, 4, 5 takes me back to tiling school! Why's your mate barefoot?

@diyforknuckleheads 9 жыл бұрын

***** Yeah it's an old tried and proven method Andy. That was my eldest son Jack. He was just walking back from having a surf when l wrangled him in to come and give me a hand. Cheers mate