the 3 iconic knobs - how the Teletronix LA2A does its magic // BYL Series3, Part 2

Рет қаралды 3,720

Жыл бұрын

Pre-S: link to the launch page with the e-paper:
analogvibes.com/byls/tube-opt...
Hey there and welcome to the second video of the third analogvibes Build Your Legend Series.
In this video series I will show you everything you need to know about the famous teletronix LA2A and - more importantly - how to get this legendary gear in your studio by building one yourself!
Now, in this video I give you an introduction and overview of this legendary compressor, we'll listen to it and will also have a closer look on how exactly it does its magic.
If you watch it here on youtube, also check out the website for the related e-paper and to leave comments, questions or suggestions directly on our Build Your Legend Series page.
analogvibes.com/byls/tube-opt...
Also make sure to join our newsletter to get all updates on the upcoming release.

Пікірлер: 22

@TrapBoiFuse561 Жыл бұрын

Need that

@MrJasonsanderson Жыл бұрын

I think front mounted limit compress switch, on the back is a pain in the rear (pun intended). Also guessing there's no need for the can cap, just go with electrolytic, but that could be me being cheap haha. Great work Martin. I perked up when i saw your Sta-level tease - Future project indeed.

@analogvibes Жыл бұрын

Thanks Jason! Most of the feedback in regards to the questions asked in this episode can be found in the comment section of Tube Opto comp kit page linked in the description. There's a clear tendency already that partially agrees with your feedback, but I'll give it one more day for the final decision until I start shooting the 3rd and last episode of this series tomorrow. Yes the STA-level... 🤩

@hitmarkler Жыл бұрын

Good stuff! Keep on going and you will gain subscribers

@luiszehmisch5566 Жыл бұрын

XLR, dicke Caps und Schalter vorne!! Ich kaufe einen!!! Danke

@realbeksy. Жыл бұрын

you are alive yeyyyyy

@jameswilson7519 10 ай бұрын

Great video. I’ll be getting me one for my studio

@simonkormendy849 Жыл бұрын

My guess is that the perceived increase in loudness is not only due to the transparent compression, it's also due to the LA2A also adding some subtle midrange harmonics too, it's well-known that the human ear is most sensitive to midrange frequencies.

@simonkormendy849 Жыл бұрын

To my ears the LA2A adds some midrange plus also a bit of loudness boost to vocals, which is good if you want the vocals to cut through the mix, very nice sound that doesn't get too harsh to listen to.

@purveshzade Жыл бұрын

its rare to get the breakdown for la2a thankyou

@ToniJXN Жыл бұрын

🔥🔥🔥

@MixedByDotRob Жыл бұрын

Very, very cool. And I also want the STA-Level. please :D

@analogvibes Жыл бұрын

Thanks!! Yes - me too! 😜

@jameswilson7519 10 ай бұрын

Do you have one available.

@yoyoma4424 10 ай бұрын

Thanks! i have a question. Sis that gain knob makeup gain.? should i do in the exact order as you.? appears you level match using gain before peak reduction.

@axxonthetrack Жыл бұрын

Would you guys also be able to assemble this upfront (for a cost of course)?

@isebanker6328 8 ай бұрын

Can I buy 1 from u

@bbensoy Жыл бұрын

I would have loved to join this one but i am on budget and yet my comp is 176 when it is on. Is there a plan for this in future?

@Chukles09 Жыл бұрын

Hi, will this be sold as a chassis kit separately or inclusive of the transformers? If I have vintage transformers, is it possible to just purchase the chassis by itself? And lastly will this include the teletronix VU meter as well?

@analogvibes Жыл бұрын

Hi, this limited edition "Silver Face" will only be available as a full kit. But all the parts and components in the bundle are absolutely top notch and following original specs. Yes - also the Teletronix VU meter will be included. Many of the critical parts are custom made such as the pots and of course the transformers and T4 cell. I.e. the vintage Allen & Bradley pots of vintage units had a very different log taper than modern LOG pots. If those modern ones were used we'd end up with too much gain way too early and that would mean you could barely turn up the gain knob beyond 15 (of 100) without the LA2A screaming at you. The same goes for the peak reduction knob. The pots for the kit are custom made to original specs of vintage Allen & Bradleys by Blore-Edwards in the UK (They are a supplier for NEVE). And as mentioned in the video above the audio transformers are custom made by AMI in the USA as a faithful re-creation of the vintage UTC A10 and A24. We tested my prototype against the 1967 Rev 2c "Silver Face" we based this kit on - from a friend of mine - and we even put of them both side by side on the mixbus of his SSL 4056G+ and he was absolutely blown away by how extremely close they were. Actually his exact wording was: "You gotta be kidding me! That's f**ing unbelievable!" 😂 The only difference was that his vintage unit was acting up every now and then while my prototype was running smoothly - I guess his needs a recap soon 😉 But in case you already have those critical parts, the grey version of this compressor is permanently available as a "chassis only" set on analogvibes.com. Step by step build guides and BOM etc. included 😉

@terrelwilliams926 Жыл бұрын

How much will the total kit cost?

@analogvibes Жыл бұрын

The entire package will be 1.599 € including all high end parts & components, wiring layout and a 60 pages step-by-step guide with almost 500 photos. Makes it pretty much painting by numbers. You can find detail information and parts list here: analogvibes.com/byls/tube-opto-compressor-complete-kit/