Thank you! Cool that you grew up here. I love it here.

I cut your sprinkler to have to the app ring into the rainbird

Mohamed, you're welcome. Thanks for saying hello.

Thanks for being helpful. I have done this many times over the yrs without much success. I have also had the emitter break from being brittle when I messed with it. Great intel though.

H Zachariah, welcome to SLO! See my video about well water first. Feel free to call me if you need anything.

Hunter makes a .5 GPH (1/2 gallon per hour) button emitter. Another option that I just used last week for a bunch of container plants is a 1/4" ball valve. You can use a std. 1/4" coupler to go from 1/2" tubing to 1/4" tubing and then at the other end of the 1/4" tubing that is in the container, you install the ball valve which you can adjust the flow and turn it off if desired.

In the description section below the video. You may need to click a down arrow on the right, below the video. If you're watching on TV, it won't show anything except the video.

Alena, Nice idea but that tubing isn't designed to be punched into. Consider a 1/2" barbed tee (made for the Techline) and add another run of Techline down the other side of the plants. Another way is to tee off the Techline to 1/2" black tubing and punch holes in it to your heart's content. 😉

@@SprinklerPros thank you! So where can I find this barbed tee that’s made specifically for tech line? And how is it different from the barbed tees that go into 1/2 blank line supply tubing, which I normally use to add 1/4 delivery branches (I think of these as the “last mile” as they will deliver 1-4gal directly to the base of the plant) Side note: I probably need some help with my industry terminology vocabulary ;)

Your lingo's pretty on track. I purchase pretty much all my materials at professional landscape/irrigation suppliers like Ewing or SiteOne. They stock the Techline barbed fittings. The difference is the size. The 1/4" barbed couplers you are asking about are tiny compared to the Techline fittings. As mentioned in the video, consider avoiding using the 1/4" tubing to the plants and putting emitters next to the base of plants and trees. In most cases you can put the emitters directly into the 1/2" black tubing and let the roots come to the water. I hope this answered your questions thus far.

Lynn, there are so many factors to consider including weather, how much water you can tolerate leaking out of the containers, whether you are willing to use adjustable emitters or if you want to keep it super simple, etc. The easiest are the 1 GPH button emitters.

Yep. Same idea. My example is obviously with just one run for ease of example. Thanks for bringing that up with everyone.

Thanks for the sub!

Sandeep, There are no emitters that can be guaranteed to NOT get debris in them, but the adjustable emitters shown at 1:31 can be flushed out if they get debris in them. The best way to help the emitters to stay clean is to be sure there is a filter on the system as seen at 2:18.

If you mean more than one 1/2" drip tubing lateral from one valve? Yes but keep in mind that a 3/4" valve with 3/4" schedule 40 piping can only safely handle up to 8 GPM and 1/2" drip tubing can only handle 4 GPM so, without knowing your design and length of laterals and how many emitters of unknown gallonage output, I wouldn't be able to tell you exactly how much you can put on a line, but you can use the above numbers to get an idea of where I'm going with this. I am planning to create a complete drip system installation guide so stay tuned and subscribe to get the announcement.

I'm not sure what you are asking.

ok. Sorry, what's bc? Have you watched my video about well water systems? If you have good filtration and keep it clean, you should have no need to clean out emitters. My 40 yrs experience with flag emitters is that they eventually get stuck to where you can't open them and the flag may break when you attempt to turn the flag. Your best defense is filtration before the valves and after the valves. I wish you well.

@@SprinklerPros flag emitters CAN be easily cleaned. Just rotate them as you pull. There is a notch in the black plastic part so when you rotate to the correct position you can pull it out and flush it. Then reinstall by pushing it in while rotating until it sets in then rotate a bit away from the notch. Done! All cleaned. And if you put it at the end of the 1/4 tube rather that at the larger tube (1/2" or 3/4" typ). they are less likely to break.