The 6 Pack Max Wedge 440 hits the dyno! First ever six pack max wedge? Most powerful six pack ever?

Рет қаралды 11,610

Жыл бұрын

It doesn’t have horse power, it has unicorn power! I say that because I doubt you can find another 6 pack max wedge don’t like this! Check out the complete build info and see how
much power we can get out of this 440 Mopar stroker motor using trickflow 270 max wedge heads fitted with a custom welded and ported original style six pack intake! Unicorn power!

Пікірлер: 80

@stevespanos75 6 ай бұрын

That is one impressive naturally aspirated 440 six pack. A beautiful job squeezing 744 horse power.

@UnityMotorSportsGarage Жыл бұрын

TrickFlow is awesome! Impressive combo.. 700hp plus 6 Pack MAX Wedge is so cool! Thanks for doing this great video

@SimpsonsSpeedShop Жыл бұрын

Thanks for watching bud! Pretty cool motor for sure

@elmandalorian6671 Жыл бұрын

Another cool Mopar 😎 video 📹

@SimpsonsSpeedShop Жыл бұрын

👍🏻👍🏻

@Mr.Mopar.23-7 Жыл бұрын

Great video, love my mopars. Many guys show dyno videos but won't share the info, like they are building a competitive stocker or super stock. Thanks for giving us the info. Happy holidays to the both of you.

@mikestackhouse9001 Жыл бұрын

You'll be kicking ass and taking names with that beast Joey! Nice video.

@dirtlump Жыл бұрын

We did one last year... 681 HP and 649 Ft/Lbs. from 505/TF270 Heads with the factory aluminum 6-Pack Intake... Ported to within 1/8" of the Max Wedge size without welding, we just didn't believe welding was worth it for a street/Pump Gas effort., , Lotsa work, and we used an INDY Valley Plate. "Street" Mechanical Roller, 10.8:1 static/Pump 91 Octane I'll see if I can get into the shop, find/print and post the Dyno Sheet.

@SimpsonsSpeedShop Жыл бұрын

That’s cool! But I think the welding and re porting is definitely why this one more so much more👍🏻

@dirtlump Жыл бұрын

@@SimpsonsSpeedShop Good Job getting well above .700 hp ! I think the extra Compression Ratio and "Race" Mechanical Roller Cams Higher Lift and 500#+ Rate/Inch V/Springs might be worth some power as well ? Just say'in... we were quite happy to see 681 hp / 649 Ft/Lbs at low Compression Ratio 91 Octane friendly, and only .580" Lift 'Street' Roller Cam.... really easy on parts.

@craigcontofalsky4387 Жыл бұрын

Great video as always! Can't wait for next year's racing videos. Hard to believe winter hasn't officially started yet! Damn!😢

@SimpsonsSpeedShop Жыл бұрын

Winter season 👎🏻 dyno season 👍🏻

@clayboy699 5 ай бұрын

great video love what you’ve done

@SimpsonsSpeedShop 5 ай бұрын

Lots more on the channel! Check it out!

@4ondflor Жыл бұрын

What a mouthwatering motor. Such a cool setup. Seems to me that Pete can make just about any engine mod work - wonder if the Chrysler boys are taking notice. Thank you so much for sharing this! I need to see you car, I’m in withdrawal.

@SimpsonsSpeedShop Жыл бұрын

Will have a car vid coming up! Thanks for watching

@evalpacer1396 Жыл бұрын

Love your Videos Joey, and you car! Keep up the fine work good man.

@racebiketuner Жыл бұрын

I love this kind of stuff. Thanks.

@48northphotography5 Жыл бұрын

Thanks for sharing the video fellow MOPAR MAN!!!

@JustMoparJoe Жыл бұрын

Awesome video! Happy New Year!

@SimpsonsSpeedShop Жыл бұрын

Thanks bud! Happy new year!

@kurtpoblenz2741 Жыл бұрын

That is a very impressive combo 😳

@SimpsonsSpeedShop Жыл бұрын

I thought so too 👍🏻

@moparsnguitars6034 Жыл бұрын

Happy New Year , Kingman AZ 🎸🎸🎸⛽🍟🍕🐱

@antisocialsecret7584 Жыл бұрын

Impressed..with the air cleaner on.

@pauljones2031 Жыл бұрын

Little bit of a frankenstien motor!But really cool. It's kind of a shame mopar never thought to make a factory 6 pack max wedge.

@Perry_Fan 11 ай бұрын

That's no slouch in a six-pack form Great job guys!

@slantfish65sd Жыл бұрын

That big block Mopar kicks ASS AND LOTS OF IT i

@frankschopp8748 Жыл бұрын

Loved that video and the power.I have a 440 6pack that I built 25 years ago and it makes good power but can always have more.Never had it on a dyno. Where is his dyno room and does he test other peoples engines or just his own. Would like to talk about doing some upgrades on my motor.

@1967davethewave Жыл бұрын

That engine made more than the advertised 390hp of a stock 6 pack engine at only 3500 rpms. That's impressive.

@kimmorrison9169 8 ай бұрын

For a fairly large camshaft, surprised how smoothly this engine idles. How about that welded up intake manifold? a nice piece for those big ol 270 heads.

@rodneybyrd9516 Жыл бұрын

Awesome Joe!! Makes me want to use 240 TFs on my 456 low-deck with the Eddy B 6-pk intake I have. I want to use FI-Tech EFI and a solid roller with 114*LSA. Maybe 600hp? LOL

@SimpsonsSpeedShop Жыл бұрын

With the right cam👍🏻

@avman1339 7 ай бұрын

The flex fuel lines are from Promax. I have them on my 440 6bbl. WAY easier to work with than the factory hard line kit any time you need to access the various parts of the Holley carbs.

@Anthony-nw5zv Жыл бұрын

Great job, great video guys. Has a single plain intake ever been tried on a six pack set-up?

@SimpsonsSpeedShop Жыл бұрын

Like a single plane intake on a original six pack motor? Ya lots

@kentstephens4770 10 ай бұрын

Street and strip, that engine would be a blast to run.

@ronsmith7739 Жыл бұрын

This is great 744hp / 780hp on a 270 wedge heads, hope this beats out the big block Chittys !!! Big what if, 4.400 bore heads with the valves to wider valve opening and use "centered" valves???

@user-nl2gz7wt2o Ай бұрын

Bad ass Mopar 😊😊😊😊

@paulcabezola3559 Жыл бұрын

Very Wicked ! I think it would be interesting to see how well one of the old Weiand Six pack single plane superstock intakes performed on this engine. Part # p3690982. Kinda hard to come by these days.

@SimpsonsSpeedShop Жыл бұрын

They are a nightmare to tune. Pete has one from back in the day

@paulcabezola3559 Жыл бұрын

@@SimpsonsSpeedShop Fuel distribution is tricky but when they're dialed in they're nasty.

@raymondpauze8801 Жыл бұрын

@@paulcabezola3559 they did that intake on Engine Masters and it didn't do to well

@paulcabezola3559 Жыл бұрын

@@raymondpauze8801 Didn't see that one. I seem to recall Paul Rossi used one on his Superstock Challenger back in the day and that car ran strong.

@maxwedgedickdasterdly5586 Жыл бұрын

I'd love to have those heads . A guy put those on out of the box. And went 10.0s 10.40s with cast MW heads. Those heads are magical! 😂

@SimpsonsSpeedShop Жыл бұрын

Big ports are cool 👍🏻

@jasonreed9429 Жыл бұрын

LOVE THE CHANNEL!!! T hat is an extremely impressive engine!!! , please forgive me ,for what maybe a stupid question, knowing it would not fit under most stock hood clearances, have you tried dounle, or even triple stacking the air cleaners, and tuning to the extra air flow? y'all BE SAFE!

@SimpsonsSpeedShop Жыл бұрын

Haven’t tried the double or triple stack yet lol. Larger air cleaners often do add some hp but wouldn’t even bother on a 6 pack style intake. If your into air cleaner stuff You should watch my vid on the w2 small block. I made my own and it’s good.

@jasonreed9429 Жыл бұрын

@@SimpsonsSpeedShop WILL DO TODAY!

@slantfish65sd Жыл бұрын

It would be very interesting to see those heads on a 383 or a 400

@SteveP-vm1uc Жыл бұрын

Yes and with the spacers and STILL under the hood!!!!! ;)

@jamesfeil2468 Жыл бұрын

I have TF 270’s on a 400-512 stroker. Similar to the motor in the video. 11.5-1, 276 duration, 660 lift, 1100 cfm ProSystem carb.

@SteveP-vm1uc Жыл бұрын

Nice build and filming, but Paul, why 493 and not 512 if you are already spending the money??

@mrhotrod1964 Жыл бұрын

I heard in the video on the build it has a 4.150 stroke crank with a 4.350 bore. Could you tell me what length rods are being run 6.76 or 7.100 and who makes the camshaft ? And what are you running for fuel and octane?

@josophschmo1585 Жыл бұрын

Can you take that intake to a foundry and have that manufactured?

@drjdmtuning4982 Жыл бұрын

Would he be able to do the same for a 383 with trickflow maxwedge heads

@devinrivera6542 10 ай бұрын

Did you run the stock mains

@phat-b6771 7 ай бұрын

Will a 727 handle this kinda power

@dougbaran5685 Жыл бұрын

What headers diameter and make?

@terryk5412 Жыл бұрын

It's all about running the numbers... Mopar-Mopar-Mopar-Mopar-Mopar-Mopar -- >> Yes, put it in your Dart... with a Pistol Grip Hemi 4-Speed

@chrisanderson6837 Жыл бұрын

Wonder who did the intake and what it cost to have welded love to have one

@SimpsonsSpeedShop Жыл бұрын

Local shop and local porter. Just time really.

@smilsmff Жыл бұрын

very nice, too bad small blocks dont make that much power that easily

@justralphajerseyguystuckin3671 Жыл бұрын

F'n Wow ! ...nope- never seen anything like that😲

@AnthonyMartinez-hf6dj Жыл бұрын

I want to do this to my 440. Could someone tell me everything done to it. like full list

@SimpsonsSpeedShop Жыл бұрын

All info in vid

@ThePaulv12 21 күн бұрын

Leave a lot of power going 6 Pack over single 4bbl. I knew it was going to be at least 20-30hp but not 50-60 and 80-90 ft/lbs.

@brianwills6796 4 ай бұрын

Whats your fuel pressure

@mattrich1081 Жыл бұрын

What brand is the dyno, i have a Stuska 1600

@SimpsonsSpeedShop Жыл бұрын

Can’t recal but I do ask Pete what brand it is in the 1000 hp big Mopar vid I believe

@TheProchargedmopar Жыл бұрын

👍💪

@pmp2559 Жыл бұрын

I thought 440 were supposed to crack the block at above 650hp? What kind of dark magic are y’all using?

@SimpsonsSpeedShop Жыл бұрын

Like I say in vid it has an engine girdle that does help a lot. Pete kinda says 650 is safe and 700 is doable. This motor combo will be in street car and you would not want to consistently drag race this as it would eventually fail.