Upgraded Induction and Valvetrain Makes Great Power on our Small Block Mopar

Upgraded Induction and Valvetrain Makes Great Power on our Small Block Mopar - Engine Power S9, E4

Рет қаралды 310,164

Күн бұрын

Our 410ci Magnum gets supporting upgrades, including a bigger camshaft, better cylinder heads, and high-flowing induction.
0:00 - Into
0:50 - Project Overview
2:12 - Engine Teardown and Cleaning
3:58 - Engine Paint Job 5
5:14 - Cam and Induction Package Install, Reassembly
14:22 - Dyno Pull
Watch Part 1: What Happens If You Just Add A Stroker Kit To A Stock Mopar Magnum?
• What Happens If You Ju...
Want to watch POWERNATION completely ad-free? Subscribe at the link below and receive the first month for just 99 cents: bit.ly/2DuRILC
Follow POWERNATION Everywhere:
www.powernationtv.com
/ powernationtv
/ powernationtv
/ powernationtv
PARTS USED IN THIS EPISODE:
Matco Tools: 1/2" Drive Flex Head 25-250 Ft. Lbs. Electronic Torque Wrench with Angle Measurement
More Info: pntv.us/pn_pt_18416_61f845769bba1
SFI Foundation INC.: SFI Foundation Inc.
More Info: pntv.us/pn_pt_18422_61f8490644adf
Summit Racing: Cometic MLS Head Gaskets
More Info: pntv.us/pn_pt_18414_61f844809ccfd
Summit Racing: COMP Cams Camshaft
More Info: pntv.us/pn_pt_18410_61f841e35d86d
Summit Racing: Harland Sharp Roller Rockers
More Info: pntv.us/pn_pt_18418_61f846d8e63d1
Summit Racing: LSM Racing Valve Lash Torque Wrench
More Info: pntv.us/pn_pt_18419_61f84750e0487
Summit Racing: MSD Pro-Billet Distributor
More Info: pntv.us/pn_pt_18421_61f8487e533b7
Summit Racing: Quick Fuel Carburetor
More Info: pntv.us/pn_pt_18420_61f847fc63a6b
Summit Racing: Summit Racing Billet Timing Set
More Info: pntv.us/pn_pt_18411_61f842a9500d5
Summit Racing: Summit Racing Harmonic Balancers
More Info: pntv.us/pn_pt_18413_61f84414d5945
Summit Racing: Trick Flow Chromoly Pushrods
More Info: pntv.us/pn_pt_18417_61f84664014b5
Summit Racing: Trick Flow Specialties Induction System
More Info: pntv.us/pn_pt_18412_61f843dd80814
ARP: ARP Bolts & Fasteners
Matco Tools: MATCO Tools are the Official Tool Supplier to Engine Power
The Industrial Depot: Tools, Hardware, Shop Supplies

Пікірлер: 519

@oscrthgrch7 2 жыл бұрын

As someone who had a reasonably built 406 SBC in a 1967 Camaro, those torque numbers mean fun all of the time, everywhere. Imagine this engine in an early 1970s Duster with a five speed!

@BuzzLOLOL 2 жыл бұрын

Imagine it in a Viper... or '65 Satellite...

@McNabbula 2 жыл бұрын

@@BuzzLOLOL Cobra 427 replica? Love to see a Mopar in one.

@yendor86 2 жыл бұрын

I have a stock stroke 360 4-spd in a 69 Barracuda that’s making 534 hp. Doesn’t have the torque of this stroker but the 488 ft/lbs that it makes will get the job done fosho

@MrJ183 Жыл бұрын

@@yendor86 which transmission

@yendor86 Жыл бұрын

@@MrJ183 A-833 4 speed

@gregbrightwell4682 2 жыл бұрын

Love that these shows are still being made. I've been watching them since the late 90's. My son's grew up watching them too. Thanks for what you do

@andrewj5736 2 жыл бұрын

these are old replays from old shows

@matthewallen978 2 жыл бұрын

@@andrewj5736 they're making new episodes

@nicolejhondelacruz9339 2 жыл бұрын

These vids will inspire new gen of mechanics and gear heads.

@kimmorrison9169 Жыл бұрын

They took Power Block off tv and put on youtube I guess?

@eddieescobar4722 Жыл бұрын

Stroker.kit ....👍💯💪💣👊badass

@michaelowen6197 2 жыл бұрын

Good build, shows what a 410 Mopar will do with good heads. But one thing to remember that they left out, the Trick Flow heads use the LA intake and valve covers, not the Magnum. Also, they use a dedicated Harland Sharp roller rocker set up at $1000. The key to power in any engine is good flowing cylinder heads.

@JT-ko3rv 2 жыл бұрын

You can use stock rockers if you wish as long as your block has the rocker shaft oiling holes drilled. If it's a later magnum block without the rocker oiling passages drilled you just need to make sure your lifters, pushrods and rockers will oil through the pushrods there's more than a few rocker setups that will work.

@BobbyOfEarth 2 жыл бұрын

By far the best results that I've seen Engine Power get after building a small block Dodge, who've typically restricted Hp with inadequate intake runner flow.

@Firion13 2 жыл бұрын

Horrible shrouding in the intake runners. What the hell were they thinking?

@DBSSTEELER 2 жыл бұрын

Yeah I think this made more than the 6.4 L hemi they built.

@BobbyOfEarth 2 жыл бұрын

@@DBSSTEELER More torque (550 vs 474lbft) but the Hemi had the Holly High Ram EFI intake and box, made 564hp vs 537 for the Magnum. The Hemi lacked the Chevy budget, using the OEM heads!

@DBSSTEELER 2 жыл бұрын

@@BobbyOfEarth The 6.4 with the high ram was all brand new parts. With out that they could have popped for aftermarket heads or CNC porting.

@1080sucks 2 жыл бұрын

Already watched it several times, just to bask in the Mopar glory. What a build for us guys who drive our cars, A LOT!

@keithbartlett7679 2 жыл бұрын

Dad had a dodge magnum with the 360, man that thing was fun to drive bone stock. Roast the tires all day..

@myridingadventures6079 2 ай бұрын

i have 1 so does my uncle burnouts are so easy on those things and the engines are so reliable.

@jeffrykopis5468 2 жыл бұрын

I could never afford those Trick Flow heads or aftermarket roller cam. Good to know that the factory setup with a 408-410 ci stroker kit can make nearly 500 lb-ft. That's where I'd put MY money; a low buck stroker kit with cast crank, SRP rods, and hypereutectic pistons. Perfect truck engine.

@donaldpowers3314 2 жыл бұрын

I think it would be more fun in my 94 Dakota with a mostly stock 5.9 . especially with the trick flow set up. . thanks for your hard work.

@jakey20022 2 жыл бұрын

Or Dodge Dakota R/T or 93 to 98 Jeep Grand Cherokee

@donaldpowers3314 2 жыл бұрын

@@jakey20022 true those too. I have reg cab 00 RT. It moves good but it's heavier. Than a gen 1 Dakota. And the pre 96 models have the 45RH trans. Which I have and like. Don't car for the solenoids that fail. But I've seen some 5.9 powered jeeps that run quick. But I don't have one.

@oellrichm 2 жыл бұрын

I did one in a 93 dakota, little bit different, 426 stroker, iron heads, efi, solid street thumper

@donaldpowers3314 2 жыл бұрын

@@oellrichm wow..

@jimbusmaximus4624 2 жыл бұрын

That's an awesome truck! Strong, reliable, capable of a million miles, AND one of the most handsome trucks ever made!

@seektruth8662 8 ай бұрын

In 1980 my first car was a 1970 duster with a slant 6. I had a 340 ready to swap in it when the car was destroyed by a Mercedes S running a red light. I put the Duster completely out of my mind when I found my second car, a Boss 302 Mustang. Fast forwarding to now I found a completely rust free original condition 70 Duster with a worn out 318 and it has a Dana posi rear end. Thanks to power Nation I know exactly what motor I will be putting in. I planned to squeeze in a big block 440 but no need when this 410 will fit great and make basically the same power and be 150 pounds lighter. With this much torque I will have to seriously strengthen the frame, but that's a great problem to have. It's going to be a very stock looking sleeper with electric exhaust cutouts and Coker OEM looking '70s rally style Mopar rims but taller and 2 in wider. It will also be getting a third pedal and a 5 speed but don't tell anyone. Love this channel.

@kelseyschoenbaum4681 2 жыл бұрын

I wish they'd have done the cam swap first to show what it did with factory heads then upgrade the top end.

@danwyrick322 7 ай бұрын

I agree

@cleveland2286 5 ай бұрын

that big cam probably would've wanted new valve springs and pushrods to handle it. The ones on the new heads probably wouldn't have fit the old ones either.

@johnbehneman1546 4 ай бұрын

THANK YOU TRICK FLOW AND ALL THE BRANDS USED IN THIS PROJECT. SHE CAME OUT GREAT.!!!!!

@troydority265 2 жыл бұрын

That's a gorgeous engine oh my goodness!! That would look gorgeous in my 1985 dodge w100 custom

@troydority265 2 жыл бұрын

My interior is beige too!

@troydority265 2 жыл бұрын

What are you guys gonna do with it?

@BobbyOfEarth 2 жыл бұрын

Nice looking engine but they might need longer oil pan studs.

@troydority265 2 жыл бұрын

I'd really love to know what you guys did with it

@winchester37a 2 жыл бұрын

@@troydority265 so annoying

@timbrwolf1121 2 жыл бұрын

The overlay on the dyno between the stroker and this build were absolutely beautiful. Excellent educational piece

@brentwinkelman1990 2 жыл бұрын

Thing is a torque monster! No loss at all on the low end

@jumpinjojo 2 жыл бұрын

*loss

@edwardmullen1581 2 жыл бұрын

For oval racing the stock bore 360 was our backup motor in place of a 0.020 over stroked 340, (355cid). We normally ran 36* timing. This was on a 3/8 mile banked paved oval. The worst thing about the 360 was the torque, it would actually spin the rears coming out of the corner, where the 355 would drive out clean.

@rogerfox9028 2 жыл бұрын

H ow was the 318?

@edwardmullen1581 2 жыл бұрын

@@rogerfox9028 The 318 was a great street motor, but never intended for track racing. The 360 was developed as the small block truck motor. The 340 was designed by Chrysler intended for racing use in the Trans Am series, to compete against GM 350 and Ford 351's. For stockcar racing where the displacement limitation was 355cu, MOPAR developed their stroker kit with a bore increase to run at the 355 limit. The 360 being a truck motor was built as a torque monster that would spin the tires too easily. The 340 bored and stroked, 355, had the torque come in higher in the rev band and revved higher, giving it a power band better suited for oval and road racing.

@stephensegal5187 Жыл бұрын

In road racing trim, the 340 was 305 cubes.

@bradmaas6875 2 жыл бұрын

Nice run, colors remind me of grandmas' kitchen in the '60's.

@dwaynehagle7445 Жыл бұрын

What a fun beautiful combination. Well done Guy's.I'm a Mopar Guy and love the combo.

@Phat_rabbitt 2 жыл бұрын

Wow I’m very impressed on how well that motor made numbers very quick.

@Sir.VicsMasher 2 жыл бұрын

This would be cool in a 1998 Grand Cherokee Limited 5.9L.

@edzimdahl1158 2 жыл бұрын

Exactly what I have,,, and was thinking

@BobF315 Жыл бұрын

I have a 2001 R/T Durango AWD, I believe they use the same drivetrain from the Grand Cherokee. Factory 3.92 gears 🤘🏼

@dexterplant778 2 жыл бұрын

Sure, that's a fine torque wrench, of course any hand tool that costs north of $650 had better be nice.

@leftventricle3 2 жыл бұрын

funny thing is, a $170 Harbor Freight wrench does everything the Matco does for a little over a quarter of the price

@juanc5149 2 жыл бұрын

@@leftventricle3 The Quinn torque wrench doesn’t have a flex head nor are it’s led lights as nice. The head is smaller though allowing it to get into tighter spaces though. Only good tools from harbor freight imo. That and the us general tool boxes.

@thejkaz1 2 жыл бұрын

I do miss being a mechanic but rapeco hell no. The Harbor Freight 1/2 in air impact I bought in 2004 is still in use today as is my 3/8 in air ratchet. A bit of maintenance goes a long way.

@randymagnum143 Жыл бұрын

I usually only buy Wright if I'm buying new. I wouldn't use a harbor fright torque wrench as a tomato stake.

@randymagnum143 Жыл бұрын

@@leftventricle3 for $170, you better get one of everything at harbor fright.

@johnbehneman1546 4 ай бұрын

PERFECT BUILD FOR ANY DAILY DRIVER.

@RealSteelFabrications 2 жыл бұрын

I drive a 1997 Dodge with the 360 magnum. Impressive to see the performance y'all got out of the small block, especially the torque.

@newlogan5863 Жыл бұрын

It the best small block.

@fordmanx3 Жыл бұрын

@@newlogan5863 my favorite small block but needs the aftermarket it deserves ☑️

@pennyhelga3628 2 жыл бұрын

The perfect engine for my 2011 wrangler two door . With EFI instead of a carb .

@garywilliams7484 2 жыл бұрын

Would look better in a TJ than a JK.

@hykennedy5049 2 жыл бұрын

Finally, dyno is done. 550 pound feet of torque from small block is pretty healthy. Thought the guys seemed a little apprehensive on the dyno. Wonder what happened to the Ford red painted magnum from like a year ago? New paint job looked ok on the engine stand, but wonder about it in the engine bay. All in all, they finally finished the job. Good job!

@cliffdaddy126 2 жыл бұрын

On the earlier 410 build they don't show the dyno video because they used LA heads and valve train on a magnum block and it blew up

@hykennedy5049 2 жыл бұрын

Did not know that. Mix and match not good in all areas. At least they did a good follow up to satisfy all the mopar fans that were left up in the air. Goes to show you that old school small block LA can still compete with the small hemi tech world.

@thesuperjank6109 2 жыл бұрын

VGG did his 454 in cummins beige. I recognized the color as soon as I saw the thumbnail

@tombridges5946 2 жыл бұрын

I want this engine! I built a similar engine several years ago using a 91 360 roller block, Scat forged stroker crank and H beam rods. CP Bullet pistons. I used a set of heads from IMM machine, a lumpy Erson hyd roller cam. It was fun in my 340 demon. I would have loved to have a set of these heads on it!

@shane41225 2 жыл бұрын

Woulda loved to see just the cam with the stroker kit and stock heads before putting on the aluminum heads

@moparproud3978 2 жыл бұрын

That would be a riot in an A body

@budzilla00 2 жыл бұрын

How about doin a Mopar 5.2 out of the 90s model ram 1500, would like to see what kinds power you could get out of that from mild to wild

@baby-sharkgto4902 2 жыл бұрын

Bigger bump stick always helps

@karlsracing8422 2 жыл бұрын

And heads

@justinballard7242 2 жыл бұрын

@@karlsracing8422 pretty much airflow and cylinder pressure

@matts6409 2 жыл бұрын

I would like to see a ProFlo 4 fuel injection to the motor to see how it would react to MPFI system to see what power it creates.

@5spd5thgen 2 жыл бұрын

Sometimes Its nice seeing these “money isnt a factor here” builds. Not just the parts, but the equipment and tools.

@jonathanlawson4667 2 жыл бұрын

That's a pretty basic combo that is under 2k for heads and cam

@dougbaker9473 2 жыл бұрын

Heads need to match the block . Hide all upgrades as much as possible . Great video !!

@tlr-nut7275 2 жыл бұрын

That's why I went with 440Source heads for my BB-Mopar build over these Trick-Flow heads. They look like a stock casting once painted. Yet flow enough to make 600+hp.

@strider8933 2 жыл бұрын

That is a REDICULOUSLY nice combo!!!!

@Sir.VicsMasher 2 жыл бұрын

Now put it in a Syclone theme'd 4wd regular cab Dakota since traction will be a major issue. Painted in dark metallic gray with red accents and 90's graphic package.

@DoubleADad 2 жыл бұрын

One thing that always drives me crazy is they never put out the money numbers spent compared to hp grains

@thadoggma 2 жыл бұрын

You can't measure happiness in dollars, now can you?

@donnieleeman8817 Жыл бұрын

They have a parts list for every episode you could easily check the price yourself.

@johnbehneman1546 4 ай бұрын

I LOVE SPENDING TIME WITH MY MOPAR FAMILY!!!!

@DBSSTEELER 2 жыл бұрын

1 ) it made the same power as a heads cam 6.0L LS. 2 ) I would have liked to see the first stroker combo with more cam before adding the aftermarket heads.

@931tech4u 2 жыл бұрын

Love these 360 videos

@Uno1420-fuker 5 ай бұрын

When i heard trick flow was making small block Mopar i had my Dakota with 318 . This is literally the build i wanted to do. Lost that truck over a hundred dollar storage fee. 137ish thousand miles. Was almost perfect. Yay life lol. Miss that truck

@stephenwest798 3 ай бұрын

I have turned my stock rods and crank, forged piston, stock heads and valve springs up to 8200 rpm, no problems. Been running 33 years, two trucks, two Ram Chargers and now in a CJ5. I would have no problems turning that stroker 7000 rpm and if you look at the graph the hp was still climbing so who knows what the peak hp would have been had they done so. As long as your engine is under load you should be safe, one reason why I never power shift at full throttle, always lift slightly when shifting, beats blowing an engine.

@dang5553 2 жыл бұрын

So happy to see 190 cc heads for sb mopars

@tucker7631 2 жыл бұрын

Great vid guys. Always been a Mopar fan. Colour scheme works nicely.

@thundercleese88 2 жыл бұрын

Cool build. I didn’t care for the color combo but I’m sure others did. Great job

@donaldpowers3314 2 жыл бұрын

Interesting I just scored a pair of eddy performer at conroe swap meet. The guy had W5 heads too. Now I'll put my 408 together. I don't need the huge numbers but it will be better than stock magnum. Heads.

@jamesdiehl8690 2 жыл бұрын

More power, more power, get a Binford rebuild kit! Aarrgghh, aarrgghh! 😆 🤣

@kona5853 2 жыл бұрын

I’d like to see a mopar progression and dyno comparison of a 318/5.2 magnum buildup and a 4.7 Corsair buildup. 400+ hp goal.

@bdugle1 2 жыл бұрын

Nice engine combo! You never saw peak hp though, that curve never turned down.

@BuzzLOLOL 2 жыл бұрын

Intentional?

@jwhmerica504 Жыл бұрын

I would love to see a LQ4/LQ9 with just stroke.

@thegdfp6447 2 жыл бұрын

It was still pulling... 6500 would have been nice to see

@orlando_mopar_srt 2 жыл бұрын

Absolutely gorgeous engine, oh I wish I had that in my car 😍💪🏻💪🏻

@billsanders3604 2 жыл бұрын

Awesome build. Might go good in my 65 Dart!!

@AntiPattern328 Жыл бұрын

Such a smooth curve on that thing. Wow, that is amazing.

@behemothpowersports5958 2 жыл бұрын

That engine is beautiful! Is it for sale? I’ll take it

@kirbywinters1291 2 жыл бұрын

I feel if Chrysler would have made changes to this engine in the late 90s it would have made good power out of the factory but now thanks to the aftermarket you can build a junkyard engine to make really fun power for a street car or truck

@ronfedor5172 2 жыл бұрын

Love to see this on E85

@stephhaug3316 2 жыл бұрын

REALLY great job! Thanx!👍

@devincornett2121 Жыл бұрын

Tbh id love to see them do a wrx sti from stock to a high level build it would be wicked

@cutlets6152 2 жыл бұрын

I would have liked to have seen a true magnum with efi and a computer running the show.

@shaunclifton5281 2 жыл бұрын

Me too. I want to see the keg run.

@jayisfedup6896 2 жыл бұрын

Makes 2 of us. I liked to see one pulled from a 94-01 ram with same build but with the fuel injection set up.

@rafaeltorres2886 16 күн бұрын

Shoot, I would be happy with just the stroker and stock everything now that would be fun.

@TheMotownhustler Жыл бұрын

I appreciate your time and effort. I'm an to copy most of your moves. 👍🏾

@johnbehneman1546 4 ай бұрын

GREAT VIIDEO AND EDUCATION. THANK YOU SO MUCH. I LEARNED A LOT.

@bobhricko9892 2 жыл бұрын

Absolutely love this show.

@mcm95403 8 ай бұрын

If you pull the intake first, its simple to get the intermediate shaft out. Plus, it was on a stand, you could just turn it upside down and it will fall out.

@markwallace5274 2 жыл бұрын

I actually love that Color !! Great looking engine

@wsfwsf1497 2 жыл бұрын

Not only that, that color makes the engine rev higher too!! :)))

@moparnut91 2 жыл бұрын

That sure would look good infront of a 6 speed in my 91 D150 long bed. Good power tour engine 🤘🤠🤘

@JoeZelensky 2 жыл бұрын

The only thing that would have been better for street engine is getting the CR up to about 12.25:1, which is near the limit for 93 octane. That would have yielded some pretty nice gain as well. But as it stands you can run eco 87 or lower octane on it which is pretty impressive.

@tomcox2565 Жыл бұрын

That is very very respectable. Those numbers are awesome boys! But as a Mopar purist… that engine colour…😮

@LeonardCrassman 2 жыл бұрын

Wow great street motor!

@totensiebush 2 жыл бұрын

I wonder if there's a scaling issue on the dyno at 16:19. The torque numbers cross at around 2600/again at 3000, the hp numbers don't.

@pa2922 2 жыл бұрын

Love that show!

@papilloncycles3463 2 жыл бұрын

426 Hemi territory with a 360 block... WOW!

@topenddean 2 жыл бұрын

Very nice little SBM!

@Clean97gti 4 ай бұрын

The 318 and 360 were always hampered by their very tame heads and weak cam. Especially the 318. These motors come alive with a cam, heads and headers. The Magnums in the trucks suffered with that big goofy beer keg manifold. They make good torque with those, but if you want higher end hustle, those things gotta go. There is a guy here on KZfaq who wanted to keep the very nice port injection setup, so he grabbed a good air gap dual plane manifold and machined in some bungs to hold the factory injectors. The factory throttle body on these is capable of more than 700cfm, but there's room for improvement with some porting and thinning things out, or buying a Hughes Big Gulp and TB to 4-bbl adapter plate. and best of all is that it will likely pass smog checks because you left the factory emissions controls in place, assuming you don't go crazy with the cam. Comparing the initial dyno to the final just shows how much these Mopars are being choked out by factory components. You can see that cam pull hard all the way up, right until it runs out of beans a little over 5k RPM. The heads look like they'd support even more cam if you didn't mind a lumpy idle. Probably an easy 600hp in them with the right cam.

@jeanlawson9133 Жыл бұрын

Color is nice....and running sweet.

@autonomous_collective 9 ай бұрын

Nice build. Very respectable numbers.

@lawrencefoster2120 2 жыл бұрын

That is a nice looking engine to, clean.

@bladenrexroth2555 2 жыл бұрын

Frankie "Up next... It's time to make more power" James Pumphrey "Mo Powa BaBeh"

@CJColvin 2 жыл бұрын

This 410 Stroker would be a great swap for the Mopar Muscle truck.

@Thelongmanable 2 жыл бұрын

*_Still like to see Brodix heads put on the 4.3!!!!!_*

@BobF315 Жыл бұрын

I have a bowtie 4.3 I’ve been piecing together. 4 bolt block, 18degree heads, cross ram intake. Looking for 1,000hp on an S480

@Rattletrap-xs8il 2 жыл бұрын

like to see a supercharger and better gas just for fun.

@PapaDon850 2 жыл бұрын

That would be nice power plant put into a 80’s Ram D150 short bed/step side painted the same color as the block.

@buckykattguitar 8 ай бұрын

This would be fun in my 62 valiant wagon.

@hibiki54 2 жыл бұрын

That's a rock crawler engine, baby!

@ralphvalkenhoff2887 2 жыл бұрын

I’ve seen lowering the oil level by a quart or two increases hp. Wonder if you could test a similar run.

@the_car_guy5915 2 жыл бұрын

That sounds like a GREAT idea! The sarcasm is real here folks.

@arthurerby2466 Жыл бұрын

Late but thank you guys for this currently building two durangoes one 5.2 2wd with powertrax and a 5.9 4x4 engines are going to be cheap / midrange so we can cover everything from can to intake and headers to exhaust lift kit and wheels should be interesting results for me and the little brother

@approachingtarget.4503 2 жыл бұрын

Astonished its pump gas at 11.5:1. Any hiccup and its toast.

@dubiousf00d 2 жыл бұрын

I had the same thoughts. Risky business for sure.

@BobbyOfEarth 2 жыл бұрын

Aluminum combustion chambers quench much better than iron heads, so they run cooler and allow higher compression by around 1.25 points.

@elmerfudpucker3204 2 жыл бұрын

The piston and head design have everything to do with that.

@autopar3000 2 жыл бұрын

He said 11.05:1. But still, I agree, that's quite a bit for the street even with the aluminum heads.

@BobbyOfEarth 2 жыл бұрын

@@elmerfudpucker3204 Narrow bore spacing and large valve diameters in small blocks, tend to create valve shrouding in the outside pockets of the combustion chambers. It's the reason Ford 351 Cleveland, 429 and 460 heads are so good, all having a valve train geometry that slants the valves towards the center of the bore, creating more power than typical heads. And because aluminum heads with less shrouding run even cooler, it's worth an additional .25 points of compression. I build a 650 hp street Ford 429 @ 11.5:1 for my 40 Ford deluxe coupe project and with an it's adequate cooling system, there was no detonation on 93 oct.. regular daily driver..

@ItalianStallionLouie 2 жыл бұрын

Hey guys, could you do a comparison on Individual Throttle Bodies vs a big carb?

@yotamonster Жыл бұрын

Nice to see some Mopar

@marioleal4307 2 жыл бұрын

Can you guy do a video where you build a 408 striker ls with a 300 shot of nitrous.

@Pure_KodiakWILD_Power 2 жыл бұрын

Beautiful engine.

@Techangler65 2 жыл бұрын

Great show guy’s

@mlp-hot-rod5824 2 жыл бұрын

An identical build to this (possibly with a six pack) would kill it in a sassy grass green 1970 Cuda. Though, I would've appreciated a 3500 to 6500 run.

@futuresonex 21 күн бұрын

I'd love to see this engine or any other fully-built engine etup with EFI and an aftermarket induction system that has been ported, polished, & port-matched by an expert. I'd like to see not only what the engine is truly capable of, but also whether there is any point in doing all the handwork involved in a porting, polishing, & port-matching job anymore with the really good aftermarket we have now! Is there room to improve a set of Trick Flow heads? Or Air Flow Research? Or Edelbrock, etc....

@phillanassa759 2 жыл бұрын

Very Exciting Numbers! I think the 360 is one of the most underrated Mopar mills out there. Most folks don't know its a stretched 340, essentially with the 340's best attributes, LA or Magnum version.. Had the'73 oil embargo not hit when the 360 was fresh, it think it would have developed past the 340 in ability and popularity. 360 3 pack yea baby! What fuel octane and blend are you running with over 11:1 compression? I did hear that right, over 11:1 compression ratio, correct? Why is the distributor locked out, won't that kill its street manners, especially with a computer controlled dizzy and a tune? How about fuel injection vs. carb? This combo really has my curiosity piqued,.. I would like to build something just like it for a 1998 AWD 5.9 Magnum Limited Grand Cherokee, which I just so happen to have at the moment. Perfect power numbers to get it moving like the newer non-supercharged Hemi Jeep and Durango! Be able to whoop up on them on Friday nights at Lincoln!

@dennisj.isreal8263 2 жыл бұрын

🤠 *Master Automotive Sensei 🤓 Pat and Budding Automotive Rock Star Frankie 🤩; You 2 R A Dynamic T.E.A.M.= & Your: Togetherness, Each Accomplishing More Meticulous Endeavors Having Great Fun; Is Giving Us Your: Audiences / Disciples, Such Simplistic Complete Understanding and With Great Comprehension 2B Better Mechanics Too, We Salute U2 Both* 🤩

@THROTTLEPOWER 2 жыл бұрын

Great vid!!!!!!!!!!! 👍👍👍

@CarsandCats 2 жыл бұрын

The way the power gains drop substantially after 5,000rpm, do you think it might be the stock lifters? Yes, it made very good power but the graph looks to me like there is a lot left on the table. I think this thing would love a solid roller.

@smilsmff 2 жыл бұрын

Intake Manifold flow and heads flow restricts top end