"The Beast" Allis Chalmers 7095 Walk around

Рет қаралды 42,438

Peterson_Farms

Жыл бұрын

What all went into the making of the 7095!
Remember to LIKE and SUBSCRIBE!!!!!!!!!!
Thanks for watching!!!!!!!

Пікірлер: 89

@twotalljones4790 Ай бұрын

Boy you are one skilled talented man.That is a work of art.

@janjocham7720 Жыл бұрын

Nice video. I like your 7095 with the tilt front grille. Since Allis Chalmers don't exist anymore. As a former Allis Chalmers employee who worked with the engineering department. Your project is Allis Chalmers approved. You did a great job. Now for the shakedown or working it in the field. If you should find any issues. It will become a better tractor. I can't wait for my inspection tour. Nice job. 33:36

@AllisPeterson Жыл бұрын

Thanks Jan! I appreciate it!

@jasonbaker8424 Жыл бұрын

Amazing work. The vision, planning and fabrication are all top notch.

@AllisPeterson Жыл бұрын

Thanks much!

@tractortalkwithgary1271 Жыл бұрын

That is absolutely beautiful. I have never in my 66 years driven an Allis Chalmers. Some day I hope to rectify that.

@vern146 Жыл бұрын

me too

@oldtruthteller2512 Жыл бұрын

Personal experience, the D17 was the best they built.

@alan.dillon.mortgages Жыл бұрын

I really like what you did, well thought out and executed and that tractor looks awesome, good well done!!. I work in an office in Virginia near Washington DC, I was born on a small farm in Northern Ireland and I respect great engineers and that is what you are sir!

@AllisPeterson Жыл бұрын

Thanks very much!!

@markthomas5094 Жыл бұрын

Very nice. You put a lot of time into that machine. Something to be proud of. Can't wait to see it in the field.

@AllisPeterson Жыл бұрын

Thanks! I'll for sure post up some good videos of her workin this year.

@jdeere8850 Жыл бұрын

Nice build, Defenetly what AC should have done. Longer wheelbase and this motor. 👍🚜

@AllisPeterson Жыл бұрын

Thanks!

@derrickzenner9300 Жыл бұрын

Awesome tractor. I really like the longer wheel base.

@demontrain4438 Жыл бұрын

Nice job. You put a lot of thought into the redesign to make everything easy accessible to service. Looks beautiful will be nice to hear it run

@donbenson5292 Жыл бұрын

Welp... someone is making Allis's again.. ought to do some more!!!! Revitalize the name and brand. Great work!!

@PickAxSimulatorGaming Жыл бұрын

Nice work ! love it . can't wait to see her work

@paulm6211 Жыл бұрын

You could be a tractor engineer. Very nice job you did on your Allis!!

@AllisPeterson Жыл бұрын

Thanks very much!

@mikeraftis6332 8 ай бұрын

Amazing Tractor ! Great engineering. A lot of thinking and custom work. Should have labeled it a 8090

@AJmx2702001 Жыл бұрын

Thats a really nice work of art you have put together there for sure. Gives us a good idea of where things might have been. I have seen the IH 88 series Mated to Magnum rear ends and cabs and those are a great piece to see and your Allis would fit right in with that as well. Allis could've made the 8095 that could have been a game changer with 200 + horse category. I know IH had toyed with offering cummins power in a Larger 2+2 300-400 horse. Would've been a battle with big Allis FWAs and IH with Cummins 2+2

@Antique-Tractor-Garage Жыл бұрын

Nice tractor , can’t wait to see it in the field!

@paulratzlaff2935 Жыл бұрын

Great looking rig! Keep us informed how it's performing!

@davidgray4599 Жыл бұрын

Jon Kinzenbaw I'm sure like me would be very proud of you. Thank you for the video. I to bleed orange!

@AllisPeterson Жыл бұрын

Thanks!

@scottherman2326 3 ай бұрын

looks great Tyler!!!!

@jimthomas1196 11 ай бұрын

Awesome tractor!!❤

@jamieshields9521 Жыл бұрын

Bloody awesome job, definitely be proud of this nice engine build. I have heard many farmers swap engines from AC to Cummins or CAT but like combine N5 choice👍this vid is what YT should be for, give farmers ideas n help solve problems👍

@chadshafer8095 Жыл бұрын

You have a Awesome tractor,

@joemalone9380 Жыл бұрын

hats off to you . amazing job .it's a lot better than half way decent . it's a credit to you.

@thevox1075 Жыл бұрын

That thing is AWESOME!

@garybarrett6581 Жыл бұрын

thanks for showing!! I am hardcore AC man!!!!!!!

@derekkienzle2582 Жыл бұрын

Why ac never used this engine in tractors from the factory is a mystery. Anything bigger then a 8050 and 7060 the 426 wasn't enough motor. Looks awesome!!!

@brucebaldwin1375 11 ай бұрын

From what I remember being told that engine was in the prototype 7080 the reason I was told they switched to the 3500 was the engine ran at a slower RPM which increased the time under load of the transmission gears by going to the higher RPM engine it made the transmission last longer but same couldn’t be said for the engine.

@brucebaldwin1375 11 ай бұрын

Awesome tractor I may have to think of that for my 8070

@holsteinsanddiesels7758 Жыл бұрын

That’s an awesome swap. I’ve been wanting to put a 8.3 in one, but I’m gonna have to look into this now

@AllisPeterson Жыл бұрын

It's a awesome swap, but it is much more involved than a 8.3 swap.

@joshhalderman2917 Жыл бұрын

Awesome

@markrskinner Жыл бұрын

Top class

@trenthansen8716 Жыл бұрын

Someday I want to do that to a black belly 7580 since that’s the engine they should have had

@wesleysmith5580 Жыл бұрын

She is one sexy girl in a tight orange dress, nothing but love and respect. God Bless 🙌 and good days farming.

@brandonkarpel6521 Жыл бұрын

Good video. Nice build. Think 8000 side panels would have cleared? Is your front frame shorter than a 8095? Always wondered what would have happened if Allis Chalmers survived.

@AllisPeterson Жыл бұрын

Thanks! I would have had to make the hood 2.5" wider on each side or cut the 8000 panels for clearance. But I had been dreaming of a 7000 series with a 8000 cab and 4wd for a long time. So this is the end result. I believe she is much shorter than those tractors.

@rongrose3746 Жыл бұрын

I did not know allis made a 7095 ?? Very nice !

@AllisPeterson Жыл бұрын

Allis never made the 7095, I did.

@ericlakota1847 Жыл бұрын

Wow some one cut axel shaft ?sapose it got hooked on tight gate one to meny times

@nathanfesenmaier4070 Жыл бұрын

How much work was it to put the 7000 side curtains on it. Did you swap the top and the grill too or are those still 8000 series?

@AllisPeterson Жыл бұрын

Everything from the dash cowl forward for sheet metal is 7000 series.

@rogerburkholder7524 7 ай бұрын

I don't know why AC didn't put the 516 in the 7080 and 7580.

@Dennis-bj9cj Жыл бұрын

Like the gray interior.

@AllisPeterson Жыл бұрын

Thanks! Wanted to do something different with the interior too. With the addition of the tinting and now the Grey interior, it is much cooler inside on the hot days.

@Dennis-bj9cj Жыл бұрын

@@AllisPeterson much more "uplifting" than the factory brown!

@AllisPeterson Жыл бұрын

@@Dennis-bj9cj definitely!

@rickykraus7450 Жыл бұрын

I just stumbled on this video. Where are you located? When I heard you say Niemuth implement I was thinking what? I grew up in the area. Beautiful tractor you have created!

@AllisPeterson Жыл бұрын

Thanks! We are in the little town of Westboro.

@rickykraus7450 Жыл бұрын

@@AllisPeterson I know exactly where that is. I grew up on a farm by Stetsonville.

@AllisPeterson Жыл бұрын

@@rickykraus7450 cool! Small world!

@rickykraus7450 Жыл бұрын

@@AllisPeterson Sure is!

@davidking5384 Жыл бұрын

Very nice job! Planning a 4w270 to go with it?

@AllisPeterson Жыл бұрын

Thanks! I would love to take a 4w305 and make one. But to find a decent 305 with a bad motor will be hard. Perhaps someday!

@farmboy_907 Жыл бұрын

Did you have to put a big 1000 pto because of the motor swap and hp difference?

@AllisPeterson Жыл бұрын

Yes, plus our chopper is big 1000.

@Dennis-bj9cj Жыл бұрын

Does that tractor smoke like crazy when you first start it? The N7 put on a great smoke show every morning!

@AllisPeterson Жыл бұрын

When it's colder, yes some Grey smoke. But otherwise no. She is a pretty healthy old girl.

@Dennis-bj9cj Жыл бұрын

@@AllisPeterson think it was normal. The N7 puffed out quite a bit of smoke when you first started it until it found itself. It was kinda the highlight of the day!

@timothylessing4774 Жыл бұрын

It's the retard Notch on the plungers in Fuel pump. It went to full Fuel and delayed the injection timing by approximately half to allow the fuel to be injected into a hotter air charge improving the chances of ignition, however due to incomplete combustion copious amounts of black smoke is released. 🤣🤣

@timothylessing4774 Жыл бұрын

I was always under the impression that the 6-85 engine was 514cid I've never heard it referred to as "516" 🤔

@AllisPeterson Жыл бұрын

Nope it's 516. Always has been.

@CharlesCanary 5 ай бұрын

Would you ever take it to the half century of progress and display it?

@AllisPeterson 5 ай бұрын

I would love to, but with dairy farming thats a full time job and no way to get it there it would be hard.

@CharlesCanary 5 ай бұрын

@AllisPeterson oh, great tractor though

@michaelsedway9703 Жыл бұрын

We want to hear it roar

@AllisPeterson Жыл бұрын

Ita going to be a little while. Got a good foot of snow again in Central Wisconsin......

@alexmikhael5061 Жыл бұрын

how many HORSIES or BTU's it got??? :) how much more with the upgraded engine? :) TUNED?? stock?? :) unpausing prolly answered how many HORSIES it has within the next 4 miuns... lol 8:13 unpausing lol

@alexmikhael5061 Жыл бұрын

27:34 270hps at the flywheel in a combine...... ya said, I caught that... :) cool! 255 out the pto cool

@billamsberry7976 Жыл бұрын

That's a assume swap do you like the power shift better than the director

@AllisPeterson Жыл бұрын

Thanks! Yes we love the power shift much more than the power director.

@billamsberry7976 Жыл бұрын

@@AllisPeterson I never was around the power shift

@justincase2830 Жыл бұрын

I thought you would start it up

@AllisPeterson Жыл бұрын

Can't have all the good stuff in one video now! Lol

@justincase2830 Жыл бұрын

@@AllisPeterson I saw it run in a short clip next to this video so I got my "fix'!!

@deere7227 Жыл бұрын

Neighbor has older AC and 2 Agcos, rrecognize the interior layout. I have Deere, try not to drive his orange cause I develop a rash

@jeffbute8431 Жыл бұрын

1st what's the HP, 2nd weight, your showing lots of filters, oil, fuel, hydraulic?????? I think it has 8 speed power shift??? Any ranges??? Clarity. We are not all Allis guys.

@AllisPeterson Жыл бұрын

255 at the pto, no idea on weight. She is strictly the chopper tractor. The two filters on the drivers side or left are fuel filters. The 4 on the other side are, rear two engine primary oil, middle little one is water filter and front big cat filter is the bypass oil filter. This is a power shift tractor. Two ranges with 6 speeds each.