The Benchdog Tools 346 Quad Hole Jig Demonstration.

No video

The Benchdog Tools 346 Quad Hole Jig Demonstration.

Рет қаралды 3,740

Күн бұрын

How to Use the Benchdog Tools Enhanced MK4 346-Hole Jig for Precision Woodworking.
Description:
Welcome to our comprehensive guide on using the enhanced MK4 346-hole jig, the ultimate tool for precision and versatility in your woodworking projects.
In this video, we'll walk you through the features and benefits of our meticulously redesigned MK4 jig, including:
* Expanded versatility with 32mm, 48mm, 64mm, 80mm, and 96mm holes.
* Alignment pin threaded holes for seamless edge alignment against sheet material.
* Easy creation of MFT tables from scratch with pin holes set back in 16mm increments.
* Utilisation of a 30mm guide bush/copy ring and a 20mm router bit for precise positioning.
Our comprehensive MK4 package includes everything you need for precise and accurate hole creation:
* 1 x MK4 Jig Plate
* 2 x 20mm Quad Bases
* 3 x Pins
* 2 x M6 x 25 Countersunk fixings
* 1 x 4mm Hex Key
Why Choose the MK4 346-Hole Jig?
* Simplifies the hole initiation process without relying on pre-existing holes.
* Ensures perfect alignment and precision every time.
* Ideal for MFT tables with 20mm holes spaced at 96mm centers.
What's Included:
* Detailed overview of each component in the package.
* Step-by-step setup and usage instructions.
* Tips for achieving professional results in your woodworking projects.
Get Started with the MK4 Jig: Watch our video to see the Quad Hinge Jig in action and learn how to elevate your woodworking projects with precision and ease.
Don't forget to like, comment, and subscribe for more woodworking tips and tutorials!
Connect with Us:
* Website: www.benchdog.co.uk
* Instagram: benchdogtools
* Facebook: benchdogtools
#Woodworking #MK4Jig #PrecisionWoodworking #MFTTable #DIYWoodworking #ToolReview

Пікірлер: 11

@robertpearce8394 Ай бұрын

Have you made an MFT using this jig? It seems to me that it would be impossible to make an entire table with sufficient accuracy. I have used the Parf System a few times, and I have always been a little bit out. (ThIs is down to me, not the Parf System.) The Benchdogs Precision Triangle is a very stringent test of an MFT top.

@zohebthayer Ай бұрын

Wondering the same thing

@Benchdogtools Ай бұрын

I will make a video with me doing this. As I have said previously I’ve not been a fan of jigs for mft tops. This is something that should always be cnc made as you need it for precision. Other wise it’s useless if it’s not producing perfect 90degrees.

@Benchdogtools Ай бұрын

Max 35mm from the edge of table to centre of the hole.

@mikeking7470 Ай бұрын

In the USA a 30mm guide bushing is "impossible" to find.

@darrenflynn3791 Ай бұрын

Would you ever consider making the mft top jig like what trend make to speed up routing out the holes?

@moesawad Ай бұрын

Great timing because I’m using that jig this week. Is it 35mm from the edge of the hole to the end of the table or from the center of the hole to the edge of the table?

@cjcheshire Ай бұрын

Need a list in the description 😅 30mm guide bush for the router 20mm bit for router - any suggestions in type? (I use a 1/4 size)

@samsonacc8081 Ай бұрын

Any plans for small 150mm square in ultra combi series? Going to get stainless 450 and 150 but I would also love to have the small adjustable one too like your 320, doesnt need to be "fortyfive". While the stainless series will do most of marking out, there are situations where only adjustable will work like setting overhang on end panels. Thanks.

@Benchdogtools Ай бұрын

Yes we are just on a build of a new product which we will be releasing in the next week.

@samsonacc8081 Ай бұрын

@@Benchdogtools nice, thanks 👍