The Best Bits and Burrs You Need for Dremel Wood Carving (My All-Time Favorites)

Рет қаралды 62,770

Күн бұрын

Here’s a video of my favorite bits and burrs for carving wood which I think everyone should have. These work for Dremels and any standard 1/8th inch rotary tool. They're not that expensive so I really think you should purchase them if you want to get into wood carving. Comment if you have any questions or recommendations! I’ll list the accessories and their time stamps below. Thanks for watching!
Like what I share and want to support the channel? Buy me a coffee at the link below
ko-fi.com/logscarvingclub
Thank you for watching!
Dremel 4300: amzn.to/3DOBhFJ
0:00 Intro
Amazon links for the tools and accessories I use below:
Amazon Prime 30-Day Free Trial:
amzn.to/3BqW2tz
SHAPING:
0:16 Dremel 561 amzn.to/3dOQpIw
0:45 Dremel 562 amzn.to/3rVsSy9
CARVING:
1:07 Kutzall Xtreme Flame Burr amzn.to/3yl8veT
1:25 Kutzall Original Taper Burr amzn.to/3m0TVnN
2:04 Tungsten Carbide Burrs amzn.to/3s4S4Ct
ENGRAVING:
3:06 Dremel 191 amzn.to/3DScmkG
3:30 Dremel 106 amzn.to/3F46sP3
3:40 Dremel 111 amzn.to/3m0zA1Q
SANDING:
4:04 Dremel 84922 amzn.to/3GFMvhw
4:27 Dremel 407 amzn.to/3pPbp7V
4:43 Dremel EZ402 amzn.to/3yhJote
5:12 Polishing Wheels amzn.to/3oNDxsP
6:04 Remaking Sanding Disks amzn.to/31UsoNR
“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites at no extra cost to you.” "As an Amazon Associate I earn from qualifying purchases."
Wear a mask, eye protection, and hearing protection, and consult your tools' manuals prior to using them to ensure safety. This video is for my insta @logscarvingclub.
If you're looking for more wood carving designs and videos, I recommend watching the video where I carve a greek paddle with a Dremel 4300. I use Walnut, Poplar, and Epoxy! The epoxy was a hassle but came out really cool.
I apologize for the couple of points at which the video glitches, I tried several times to fix it and couldn't figure it out.
You really don't need to invest in a lot of tools to make something cool! Other than the initial purchase, making carvings with a Dremel is pretty budget-friendly, and you can make some really inexpensive gifts as long as you have the patience. Check out some gift ideas on my channel! Thanks for being here!
5% off Kutzall products with promo code: DREMELTIME (in uppercase) kutzall.com/collections/flame...

Пікірлер: 108

@IdiotCinema Жыл бұрын

Yo, just bought a Dremel and I’m a nerd, so I read manuals. I noticed you were using the Dremel Chuck with the 561 bit. Just a heads up, the manual has a danger warning for using the Dremel Chuck with the router bits, they can fly off if you don’t use the collet and collet nut instead. Love ya, peace.

@jordanfranck 2 жыл бұрын

I don’t even own a dremel I just watch these vids because they’re so calming and interesting

@LogsCarvingClub 2 жыл бұрын

Thank you Jordan!

@suecollins3246 Жыл бұрын

Jordan, get one! They are _great fun_ and you will find _many_ uses for it!

@AndreaStevens2012 Жыл бұрын

@jordanfranck, That's usually how it starts...but eventually, you won't be able to "just watch" anymore, you'll start jonesin' to try yourself and before you know it you'll be a carving fool/addict like the rest of us. LOL! 😁

@joshuah.abailey9961 2 жыл бұрын

Thanks for going through and showing the bits up close. I just started wood carving about 2 months ago and I have no idea what I'm doing or what bit does what. So Thanks for making this video. It helped me out a lot.

@LogsCarvingClub 2 жыл бұрын

Thank you Joshuah! Glad it helped

@haroldboucherjr615 Жыл бұрын

Thank you! I got a kit for my birthday last week and trial and error is great and all, but this is exactly what I needed. I hope you have more "bite sized bit tip tips"

@LogsCarvingClub Жыл бұрын

I have plenty scattered throughout the channel, but I’ll probably make an updated version of this video that has more bits included this summer. Glad it helped! Also, happy late birthday!

@majkjems 10 ай бұрын

Hey, beautiful bear. I hope to try carving (again) this winter.. you make it look easy, but I know better. Ill be practicing anyway. Thanks for the tips. This inspires me to try again!

@LogsCarvingClub 10 ай бұрын

Thanks for the comment! You could always start with quickly carving a soft wood like basswood just to confirm the dimensions, then move onto a nicer hardwood for the final piece. I often wish I did that

@vladg5477 10 ай бұрын

You videos are absolutely amazing. Thank you for sharing the knowledge.

@LogsCarvingClub 10 ай бұрын

Thank you Vlad! More to come

@MultiTom1956 2 жыл бұрын

Loved it Sir ,thank you for your info on different burrs for carving. 🙏

@LogsCarvingClub 2 жыл бұрын

Thank you Mahendra!

@incanada83 2 жыл бұрын

Thank you for great visuals and explanation. Especially the tip on sandpapers! Nice pieces you've got there !

@LogsCarvingClub 2 жыл бұрын

Thank you so much Dee!

@kaotickrafter Жыл бұрын

I am loving your videos! And that tip for the flat sanding disks is amazing!!

@LogsCarvingClub Жыл бұрын

Thanks so much!

@eugenevictortooms4174 2 жыл бұрын

Thans for this video, I'm just about to get into power carving & you gave me a good idea of which bits I will need.

@LogsCarvingClub 2 жыл бұрын

Thank you! Glad it was helpful.

@jayc3110 Жыл бұрын

Thanks, that was a well-made and helpful video for demonstrating wood carving burrs. Best wishes

@LogsCarvingClub Жыл бұрын

Thank you jay! Best wishes to you

@DanVerde Жыл бұрын

Great vid. This will be my shopping list when i buy my carving set

@LogsCarvingClub Жыл бұрын

Thank you!

@sstolarik 2 жыл бұрын

Thanks for sharing, Logan. Good info.

@LogsCarvingClub 2 жыл бұрын

Thank you Shane!

@Splash111 Жыл бұрын

New subscriber. Thank you for this video.

@LogsCarvingClub Жыл бұрын

Thanks for subbing! I appreciate it

@MamaBird87 3 ай бұрын

Great tip at the end there, thank you!👍🏼😎

@LogsCarvingClub 2 ай бұрын

Thank you! I'm happy you found it helpful.

@newearthwarrior6302 Жыл бұрын

This is gold. Thank you!!!

@LogsCarvingClub Жыл бұрын

Thank you so much!

@natm7856 2 жыл бұрын

loved this video! i thought the sanding disks were so clever!

@LogsCarvingClub 2 жыл бұрын

Glad you like them! Thank you Natalie

@drumw41 3 ай бұрын

Awesome vid! Very in depth! Keep the vids coming! I have the Dremel 8250. Learning & soon ready to purchase the burrs I need to begin. Your vid is such great help! Do you have a vid of the carving burrs needed for a newbie to begin? TY! 😀

@LogsCarvingClub 2 ай бұрын

I thought this video was for that! But I also have a new video about bits if you want to check that out. Thank you for your support!

@johnmitchelljr 2 ай бұрын

Thank you.

@LogsCarvingClub Ай бұрын

Thank you!

@renukap3662 2 жыл бұрын

Well explained. Thanks.

@LogsCarvingClub 2 жыл бұрын

Glad it was helpful!

@dallaskappel1 6 ай бұрын

You just gave me a great idea for laser cutting sand paper with my laser. Thank you!

@LogsCarvingClub 6 ай бұрын

That sounds super convenient - what laser do you have? Would love to get one

@DavZell 5 ай бұрын

@@LogsCarvingClub what do you want to do with it? Key points would be size of things you want to work on and how thick you might want to cut. Also, what materials: wood/paper/leather type things, or engraving on different metals, too. For the latter, you need a different laser.

@ivosanchez3431 2 жыл бұрын

super useful. thanks !

@LogsCarvingClub 2 жыл бұрын

Thanks so much !

@Yaboyycrunch Жыл бұрын

bro the thans for watching was hilarious to me 😂 great video

@LogsCarvingClub Жыл бұрын

Thanks - not sure why I said it like that haha

@mattcunningham9428 2 жыл бұрын

Great Content!

@LogsCarvingClub 2 жыл бұрын

Thank you soldier

@hughtempleton8640 11 ай бұрын

Great video ❤

@LogsCarvingClub 11 ай бұрын

Thanks Hugh!

@SoeCarpeDiem 2 ай бұрын

I like the Tungsten carbide because they leave no mark!

@SimplySergMX_arts Жыл бұрын

This was really helpful, I have been wanting to get those kutzall burrs .

@LogsCarvingClub Жыл бұрын

Thank you! I really enjoy them, even though they are expensive.

@lilithdablo5152 2 жыл бұрын

So cute.

@LogsCarvingClub 2 жыл бұрын

Thank you!

@sheidama 9 ай бұрын

Thank you thank you thank you!❤

@LogsCarvingClub 9 ай бұрын

Thank you for watching!

@mythichymn Жыл бұрын

Wow thank you so much

@LogsCarvingClub Жыл бұрын

My pleasure!

@skomakarna2684 2 жыл бұрын

good video!

@LogsCarvingClub 2 жыл бұрын

Thank you!

@EzPeasZ 2 жыл бұрын

Good advice on making your own sandy thingy lol.. my b, I'm new to this and generally bad w nouns

@LogsCarvingClub 2 жыл бұрын

Thank you!

@wappenschmied 2 жыл бұрын

Thanks for the content! Just finished a ring for my gf as the first thing made with my new Dremel. Can you make a video about different types of wood; or wich one you prefer & recommend? Keep it up! ✨

@LogsCarvingClub 2 жыл бұрын

I actually have one! It was posted a few months ago. Great job on a ring!

@wappenschmied 2 жыл бұрын

@@LogsCarvingClub Oh, damn, you're right. Totally missed that - thanks! 🙌

@suxatrots 2 жыл бұрын

thanks for this, really helped me with my first project.

@LogsCarvingClub 2 жыл бұрын

Great to hear👍

@granthatfield8703 Жыл бұрын

Bro you misspelled Thanks XD , no really though, I love your work bro keep it up!

@LogsCarvingClub Жыл бұрын

Thank you!

@phillipjackson2877 Жыл бұрын

If you heat up the back of that particular sand paper it activates it own glue. It gets pretty sticky I don’t know if it would as well as the regular glue.

@reallastpanther Жыл бұрын

Just kidding bud. Good video👍

@LogsCarvingClub Жыл бұрын

Glad you enjoyed it! Thank you

@deecee8108 Жыл бұрын

First thank you for the video. If you are brand new to this type of carving. What video of yours would you watch first? Thank you again

@LogsCarvingClub Жыл бұрын

Maybe first the How to Use a Dremel video and then the cat carving one, most are pretty simple to follow along with

@reallastpanther Жыл бұрын

And one time at band camp.....

@gracefulonthetrail2244 2 жыл бұрын

What would you use to cut and hollow out a 12 x 6 inch depression in a cedar log to make into a planter?

@LogsCarvingClub 2 жыл бұрын

Honestly that sounds like really heavy work for a regular dremel. Could definitely be done if the woods soft enough (maybe with the kutzall burr), but also the angles would be tough so a spherical & aggressive burr may work better. Either way it’s probably gonna take a long time so make sure to not overheat the tool. I might look into an angle grinder with a shaping dish but I have no experience with those so don’t take my word for it. Good luck!

@diogenes2976 Жыл бұрын

Essas pontas são da dremel? Quais as numeração delas?

@kc266 Жыл бұрын

Hi. Want to start wood carving.. want to invest in a Dremel lite 7760 and not more. Will it do just fine or you think i Better to go for 8820?

@LogsCarvingClub Жыл бұрын

Depends on the project - the Dremel lite has pretty minimal power and battery life so I wouldn’t use it for the animal carvings I do, but I’ve used it for small things like pendants and engravings

@Victoria_On_Wheels 2 жыл бұрын

I’m starting to wood carve as a new hobby. What’s some tips?

@LogsCarvingClub 2 жыл бұрын

I have a few videos that would be helpful, like how to use a dremel or tutorials on how to make wood spirits. Feel free to check them out! Too many tips to type

@mandyzwicker5140 Жыл бұрын

If I don't have the 561 or 562, can I use the drill bit to cut? I tried this and it came flying out, but I looked up this issue and found that I may have just been pressing too hard, or not cleaning out the wood buildup from the chuck enough... but cant really find anything about if i can use them to carve . .thanks. Also it's a brand new dremel.

@LogsCarvingClub Жыл бұрын

If it’s the drill bit I’m thinking of I really wouldn’t… doesn’t seem sharp enough on the edges to cut on its sides. A 561 individually at a hardware store is probably around $5 and the 562 maybe $10-13. I think they’ll be well worth it

@mandyzwicker5140 Жыл бұрын

Okay thanks. I intend to buy a 561. But, maybe I can just drill enough holes with the drill bit to cut the wood, instead of cut on its side, in the meantime?

@LogsCarvingClub Жыл бұрын

@@mandyzwicker5140 That’s funny - my first woodworking project was a sword and I “cut” the handle out that way since all I had was a power drill, then I hit it with a hammer to remove the chunk I wanted and evened it out with a folding knife. It worked but took forever

@mandyzwicker5140 Жыл бұрын

@@LogsCarvingClub hey thanks. Better than nothing right.

@MaryBrooke 2 жыл бұрын

What corded Dremel do you use? Looking to buy my first!

@LogsCarvingClub 2 жыл бұрын

I use the 4300, but in my experience they less expensive ones are just as good

@paytodecay9400 2 жыл бұрын

@@LogsCarvingClub what’s the difference between the dremel 4000 and 4300?

@LogsCarvingClub 2 жыл бұрын

@@paytodecay9400 I used to have the 4000, I believe they’re basically identical but the 4300 is a newer version so it looks a little different and they discontinued the 4000

@cosmicfxx Жыл бұрын

Do you wear mask while you carving? Not sure if I should worry about wood dust.

@LogsCarvingClub Жыл бұрын

Absolutely - you should wear a quality dust mask whenever you are exposed to dust. Wood dust, among the other dusts you could kick up with the dremel are pretty dangerous over time

@cosmicfxx Жыл бұрын

@@LogsCarvingClub Thanks for feedback

@AndreaStevens2012 Жыл бұрын

Very helpful video, thanks for posting! One question, please: What do you use to sand/smooth out areas that are super tiny/narrow where even the smallest sanding drum does not fit? I picked up some sanding sticks but they can be difficult to use and more often than not, do not provide the smooth finish I an going for. I'm talking about carvings or markings where the 407 sanding disk is to wide and/or too rigid to fit. Again, thanks for posting! 👌👍

@LogsCarvingClub Жыл бұрын

Great question! I’ve struggled a lot there. Usually in the teeny tiny spots I’ll use a grinding stone like the 84922 to buff it out, and then hand-sand it if I can, but the finish won’t be as good as using a sander. Hopefully that helps!

@LogsCarvingClub Жыл бұрын

I have also used very very thin files in the past, like the Rockler mini needle file set

@AndreaStevens2012 Жыл бұрын

@@LogsCarvingClub OK, thanks! I'll try a stone the next project. And, THANKS for replying so quickly...wow, you are on top of things! Thanks again for the tip!

@pxel1876 8 ай бұрын

Yo,what rotary tool do you recommend for like 30 bucks?

@LogsCarvingClub 8 ай бұрын

Hi - that’s tough to answer cause usually less expensive ones would be less powerful, like a dremel lite, which is fine for small things but I’m not sure what you want to do with it. I haven’t gotten around to trying the powerful off-brand ones

@pxel1876 8 ай бұрын

@@LogsCarvingClub Yea because I am thinking of buying a Ryobi cht-40k witch comes with a flex shaft and some accessories and does go from 0-30,000 rpm

@pxel1876 8 ай бұрын

Otherwise what do you think

@LogsCarvingClub 8 ай бұрын

@@pxel1876 I think it’s probably fine! I just can’t really say cause I haven’t tried it, but I doubt it’d be much different. Only so many ways to spin something

@phillipjackson2877 Жыл бұрын

If you heat up the back of that particular sand paper it activates it own glue. It gets pretty sticky I don’t know if it would as well as the regular glue.