The BEST Carburetor For ANY 110-125cc Pit Bike - NIBBI PE22 Performance Carb + First Start

Рет қаралды 20,751

Күн бұрын

We install the 22mm Nibbi carburetor on our SSR 125cc Chinese pit bike and start it up! this works well on 110 and 125cc bikes! we will be tuning and jetting this carb in coming videos. this was mainly how to install the Nibbi performance carb and I show the throttle slide/mounting the carburetor to the bike. Simple and easy install and first start! Be sure to purchase the PE22mm for 110/125cc bikes not the other larger carbs. if you have a 140-150 the 24mm would work, not a 26mm. Check out the Amazon links for which one you need!
CHECK OUT NIBBI RACING HERE & CARBURETORS IN THE LINKS BELOW!
www.nibbiracing.com
nibbiracing.com/products/nibb...
NIBBI Carburetor PWK24mm,fit 125cc-150cc Motorcycle Engine
www.amazon.com/gp/product/B09...
NIBBI Carburetor PE24,fit 125cc-150cc Motorcycle Engine with Carb Jets
www.amazon.com/gp/product/B09...
NIBBI Carburetor PE24FLmm, fit 140cc-150cc Flange Motorcycle Engine with Carb Jets
www.amazon.com/gp/product/B09...
NIBBI Twists Throttle Grip,Dirt Bike Grips with Throttle Cable and Handlebar Grip for SSR125 Pit Bike, 22mm Motorcycle Throttle Assembly
www.amazon.com/gp/product/B09...
NIBBI Motorcycle Air Filter,Universal Air Filters for Dirt Bike,48mm
www.amazon.com/gp/product/B09...
NIBBI Ratchet Tie Down Straps:
www.amazon.com/gp/product/B0B...
Nibbi CNC Replacement Orginal Intake Manifold CG Engine
www.amazon.com/gp/product/B0B...
NIBBI 7/8 Dirt Bike Throttle Lock on Throttle Universal Motocross for Pit Bike
www.amazon.com/gp/product/B0B...
Nibbi 7/8Inch (22mm) Motorcycle high Sensitivity Throttle Tube,
www.amazon.com/gp/product/B0B...
Thanks for Watching!! If You Enjoyed, Consider Hitting the Subscribe Button and Clicking on The BELL!!
Need Gear for All Types of Riding? Check out Klim! The best of the best for all seasons!
www.klim.com/?rstr=3brothersr...
Check Out Products We Use:
*Snowmobile Grips
amzn.to/3Fvv3fB
*GoPro Batteries
amzn.to/3pr9NSD
*ATV Grips
amzn.to/3Ez3xNe
*Pit Bike Carburetor (Better Performance)
amzn.to/3Fv4Pd8
*Dango Designs GoPro Mount
amzn.to/3FoNVgi
*SC1 Gloss Coating
amzn.to/32C9sU4
*Pit Bike Tall Seat
amzn.to/3pAdVQB
*Fuel Filters
amzn.to/3sznHEo
*Pit Bike Racing CDI/Coil
amzn.to/3FwhIDP
*Pit Bike Air Filter
amzn.to/3EysurK
*Dirt Bike Grips
amzn.to/312kguq
* In-Line Spark Tester
amzn.to/312cKja
*TRX450R Lowering Link(Front and Rear)
amzn.to/3462B6n
*Customizeable Pit Bike Graphics Kit
amzn.to/3EBFfSL
*Pit Bike Exhaust 28mm
amzn.to/3EuKT9b
Purple Panda GoPro Microphone
amzn.to/3FAbyCE
*Follow Us on Facebook / 3brothersracing
*Wisconsin
*Snowmobiles, Quads, Bikes, & MORE

Пікірлер: 72

@mikesmotoshop Жыл бұрын

Carb looks super good quality!

@bearkreekboys Жыл бұрын

It is!

@Mroswaldo16 2 ай бұрын

I have a nibbi 22mm, with a 26mm manifold. Engine would run anymore. Need tuning badly. I might have to go down on jet size & start from the bottom. It starts fine with the pz19

@ProDigit80 23 күн бұрын

110-125cc needs an 18-22mm. No need for a 24mm. 150cc needs a 24-28mm. No need for a 30mm. Speed womt magically be higher if you have a too large carburetor.

@bearkreekboys Жыл бұрын

Check out the other videos of the PWK 24mm and an unboxing of Nibbi's Carbs and Features! kzfaq.info/get/bejne/qqeHnbV_3rW2pmw.html kzfaq.info/get/bejne/lbdlrdmlxJbKeYE.html

@cilami Жыл бұрын

Very useful video. Thanks for posting. Performance wise, how the nibbi compares with the stock? I am thinking about installing a Nibbi 22 mm in my SSR 110, but some people online are having problems getting them tuned/working properly (in low and high gears)?. Would a Mukini be a better option? I will be waiting for the next videos, for sure 👍🏻

@bearkreekboys Жыл бұрын

It all comes down to jetting and what type of riding your doing. I'll have some tuning videos on this setup for sure. Main thing is getting nibbi's actual jet kit for the mains and pilots. They have so many sizes. You almost have to get the pilot circuit as rich as possible without making it so choppy. Then getting main jet to pull all the way out and not fall on it's face. I think the Nibbi is way snappier and revs faster than any of the mikunis. We had the Chinese mikuni and stock carbs and nibbi is the best for quick rev and pull on top end. They r similar to a Keihin carb like what's used on the smaller 125 dirt bikes back in the day.

@michaelneville4393 10 ай бұрын

I have the nibbi pe 22 on a 110 and if I blip the throttle quick it bogs to stall. If I slowly accelerate it's fine. Tried different pilots and still no change. High revs seem ok just that quick blip bogs bad with 30-38 pilots and air screw tried for rich and lean😢

@geritomlet2524 7 ай бұрын

On my coolster 125 the carb hits the engine cooling fins. Also the stock manifold is not 22 is there an adapter manifold out there?

@bearkreekboys 7 ай бұрын

May need a different manifold

@joeshiesty4216 7 ай бұрын

I got a 26mm one for my rfz 125 and it seems too big for the intake, been looking for some kinda adapter if I can, or just get a 24mm carb instead??

@bearkreekboys 7 ай бұрын

Watch my other videos you want a 22 mm

@tizzor Жыл бұрын

with mine i have to let it warm up run it up and down the street to get it idling good and no bog do you think i could go maybe for a smaller pilot jet cause i looked at the original jet and its so much smaller than the nibbis but hey i aint complaining i couldn’t get the bike running for 2 months cause the original carburetor broke and the replica mikuni didnt run well. thanks!

@bearkreekboys Жыл бұрын

The size of the hole in the jet has nothing to do with fuel amount being put through it it's all flow rates of those Jets so there's certain little changes in the design of the hole drilled in it that make it bigger or smaller jet number

@bearkreekboys Жыл бұрын

You want to go is Rich on the pilot as you can and tell you start sputtering rich and you'll know what I'm talking about cuz it'll sound Goofy but you want to be as rich as you can so that you could good throttle esponse and you get good cold start at idle operation

@brandonbassett7125 Ай бұрын

So I got a ssr 110cc stock. Which comes with factory 16mm carb. So if I do a 22mm carb I will not need to do jets or tune? Just bolt on

@bearkreekboys Ай бұрын

You will probably have to do some tuning, they usually will run out of the box but for best performance some adjustments are needed

@RADscouter 5 ай бұрын

Do i have to put on that specific air filter? Can i just fit a UNI foam filter?

@bearkreekboys 5 ай бұрын

As long as it fits!

@robmuhfacka5986 Жыл бұрын

I have a larger 125 pit bike the Xpro X6 and it comes with a jingke 26mm but I'm wanting to put maybe a 24mm flange nibbi?

@bearkreekboys Жыл бұрын

It would probably work decently for you! How does the bike run right now with that carb

@robmuhfacka5986 Жыл бұрын

So I went ahead and got the 22mm flange even though the bike is a little larger than pitbike size. Right now stock it runs okay but definitely not peppy or high revving it barely sounds like a dirtbike more like a small 125cc motorcycle lol its slow too it builds speed pretty well but doesn't have any real pep to its step. 1st gear is super short and second gear you pick up good speed but there's no real torque. I'm looking to make it into a wheelie machine so I'm doing the 22mm carb and a 13t sprocket up front. If need be depending on how short first and second becomes I may go with a larger rear sprocket also 👌

@cakedaddy1531 9 ай бұрын

@@robmuhfacka5986what did you find out? How’s it running?

@DanielS784 6 ай бұрын

I bought the carburetor and the air filter. I am thinking about sending the carburetor back because my neighbor said the stock carburetor should work fine. What are the benefits of putting on a new carburetor? Also looking at the stock air filter there is a hose that runs into it. I don't see any place for a hose to go on the nubbi filter so I am not sure how to out on the new one.

@bearkreekboys 6 ай бұрын

When you get the Navy tuned correctly the snappiness of it is much nicer than stock. It revs faster and gets up to speed quicker. That hose is most likely a crankcase breather hose that comes off the engine into the air cleaner certain Chinese bikes have that

@DanielS784 6 ай бұрын

@@bearkreekboys do you think it would cause a problem if I installed the Nubbi air filter and didn't connect the hose that went to the stock filter?

@DillonWaffles 6 ай бұрын

@@DanielS784you’ll just want to add a filter to the hose coming out of the valve cover. I’m assuming you’re working on a gx200 or a generic 196cc. They make valve covers tapped for a hose and filter. Or you can rig a filter to the existing hose.

@golightly209 25 күн бұрын

I have a 110 rfz apollo I see a lot of videos saying swap out the carb. What size do I need.

@bearkreekboys 25 күн бұрын

22mm nibbi

@crabrangoon2493 2 ай бұрын

Hey do you think i should get a 19mm or 22mm because originaly i have a 19mm one

@bearkreekboys 2 ай бұрын

What engine?

@crabrangoon2493 2 ай бұрын

@@bearkreekboys110cc

@bearkreekboys 2 ай бұрын

@@crabrangoon2493 you can do a 19mm one, the 22 required some jetting to make it responsive

@evan_the_bum1672 2 ай бұрын

Same here just got a ssr 110cc, stock carb is a 19mm I believe so should i just go with a 19mm nibbi ? Thanks ! @bearkreekboys

@andrewjensen5033 10 ай бұрын

Hi, I got a pit bike with this Carb, and I can't get it running. I have spark, 75 psi compression when kicked, and fuel looks pretty good. I've also looked at timing, and that looks correct... What should I do? Thanks!

@bearkreekboys 10 ай бұрын

Valves in spec? Is the fuel fresh? Is there a new spark plug in it? Has the carb been taken apart and checked?

@andrewjensen5033 10 ай бұрын

I did some more research this afternoon, and looks like I actually adjusted the valves to 0.04" instead of 0.04mm. 🤦‍♂️ Otherwise, it's a new spark, new fuel, and the carb's brand new, because the bike didn't have one when I got it. I'll readjust valves and get back to you 👍

@andrewjensen5033 10 ай бұрын

I went to readjust the valves, and the exhaust valve is stuck closed, any recommendations?

@bearkreekboys 10 ай бұрын

what do u mean closed as in the valve doesnt move at all? or ?@@andrewjensen5033

@bearkreekboys 10 ай бұрын

should be .004"@@andrewjensen5033

@taitheguy85 10 ай бұрын

Really confusing. You say bigger carbs don't work as well. Title says "best" carb - PE22. Then you say the pe24 flange works best? So, not the PE24? Just the PE22 with the 24mm flange? Or..?

@bearkreekboys 10 ай бұрын

PE22 is best, it takes a lot more trial and error with the bigger carburetor (PE24).

@adriel9354 8 ай бұрын

What is the inner diameter of your intake manifold

@bearkreekboys 8 ай бұрын

I'll have to measure again

@Turboeg 14 күн бұрын

Can I use the PE22 with stock intake neck?

@bearkreekboys 14 күн бұрын

Yea!

@Turboeg 14 күн бұрын

@@bearkreekboys thanks for the fast reply! Just picked up a 125cc and needs a new carb. So I have one on the way

@MikeMik86 2 ай бұрын

Introducing your friend valve float with a larger carb, be carful or you'll make some valve to piston love at high RPM

@MikeMik86 2 ай бұрын

The power till top end would still be better given you open up the exhaust and intake

@DanielS784 6 ай бұрын

@bearkreekboys do you think it would cause a problem if I installed the Nubbi air filter and didn't connect the hose that went to the stock filter?

@bearkreekboys 6 ай бұрын

No just tuck it away in the frame area, do not block it though. A place where water and dirt can't get in easily is best

@DanielS784 6 ай бұрын

@@bearkreekboys Do think a zip tie would work good?

@wisemrstrange1958 3 ай бұрын

will this fit on my 2018 ttr110?

@bearkreekboys 3 ай бұрын

If the bolt pattern fits I would say yes

@zancudo7797 7 ай бұрын

My 125c sputters quite alot and recently when i turn my fuel on it just comes pouring out

@bearkreekboys 7 ай бұрын

Your float is not sealing or the float height is way too high

@zancudo7797 7 ай бұрын

@bearkreekboys thanks is a 22 carb the best bet for 125 I believe I have a smaller one and feel like it's popping and backfiring instead of giving power

@5.0mlp31 3 ай бұрын

Yamaha TTR 125 will it fit?

@bearkreekboys 3 ай бұрын

You would need to check the bolt pattern spacing and the air filter diameter

@Jordxn. 4 ай бұрын

My dirt bike has a tube attached to its carb air filter, when I replace the carb, must I get an air filter that connects the tube to the back?

@bearkreekboys 4 ай бұрын

I would just re route that breather somewhere else. Or buy a filter filter for the end of that tube and tie it up to the frame. That's a crankcase vent breather and just goes to atmosphere do not plug, just find a spot so it won't get mud water dirt in.

@realztv3625 5 ай бұрын

Just put the same one on mine, is there a way to fix the lag right away when u quickly hit the throttle?

@bearkreekboys 5 ай бұрын

Richen up the pilot yet and play with your air screw

@catalinnicolaevici2061 10 ай бұрын

Thanks for the heads up i just bought one off some dude for 200$ and my buddy said the carburetors suck ass on them then after a few video i said F it and ponyed up the 60$ for a carburetor also it needed some new parts like the magneto cover and definitely new wiring cause some crackhead looks like they stuck there nose in it. But i wanted it to pull my 200lbs fatass around on it in the woods😂😂. Got that exact carb you have any tips on it? To do not to do

@bearkreekboys 10 ай бұрын

See how it is out of the box. Install it and run it. See how idle and throttle response are. Take it for a ride and see if the wide open is okay or it it bogs down or sputters. Comment on here with ur findings, I found I had to richen up the pilot for sure and also richen the needle clip if it's not at 4th position already. Let me know if u need any more help