The Best Deal in 3D Printing?? The Flashforge Adventurer 5M Deserves Your Attention

Рет қаралды 27,233

Күн бұрын

I've been looking for a modern and fast FDM 3D printer that is also very beginner-friendly while not breaking the bank. Many printers in this category are priced similarly, but the Flashforge 5M 3D printer is a steal right now at $299. I'm going to share my experience with this printer and why I think it's probably the best deal going right now.
******************************************************************************************************
Flashforge Adventurer 5M Playlist: • Flashforge Adventurer 5M
Flashforge Adventurer 5M on Amazon: amzn.to/3OC06Nu
Flashforge Adventurer 5M Direct: shrsl.com/4ev0y
Flashforge Wiki: wiki.flashforge.com/en/knowle...
BIG LEGO Stormtrooper: thangs.com/designer/BigBricks...
#3Dprinting #3Dprinter #flashforge
******************************************************************************************************
0:00 Intro
1:26 5M vs 5M Pro
5:21 DIY Enclosure
6:36 Beginner Friendly Setup?
10:06 Printing Examples
18:42 Pros & Cons
26:21 Final Thoughts
******************************************************************************************************
Coupons and Deals:
JLCPCB 3D Printing Starts at $0.30 & $54 Coupons for New Users Here: 3d.jlcpcb.com/?from=FigureFee...
Card Mafia: Use the Promo Code "FigureFeedback5Off" for 5% Off Your Card Mafia Purchase! : www.cardmafia.com?sca_ref=2492569.wSUwkQ9aSr
******************************************************************************************************
Socials:
Check out my other channel: / @jeremyhill
For business inquiries, email me at jeremy@figurefeedback.com
Follow on Threads: www.threads.net/@jeremythill
Follow on Instagram: / figurefeedback
******************************************************************************
My 3D Printing Equipment (Affiliate Links)
Anycubic Photon Mono 4K: amzn.to/3odVEKT
Anycubic Wash and Cure 2.0: amzn.to/3pH41ii
Anycubic 3D Printing Grey Resin: amzn.to/3Wdv8xK
OnePeng Grey Model Resin: amzn.to/453cIDF
Anycubic Eco UV Grey Resin: amzn.to/45cB4ei
Siraya Tech Easy Grey Resin: amzn.to/3MyZCam
Mealos Silicon Mat: amzn.to/3pRJoAg
Gorilla Super Glue Gel: amzn.to/42c4TcA
Vallejo Model Air Set: amzn.to/3oTfGdP
Timbertech Airbrush Kit: amzn.to/3CbuuI0
Creality Ender 3 Pro: amzn.to/45dvGIe
Creality Rainbow PLA Filament: amzn.to/3WfYLP9
Inland Silver PLA Plus Filament: amzn.to/3BxpHQO
Inland Grey PLA Plus Filament 2-Pack: amzn.to/432tmSg

Пікірлер: 170

@FigureFeedback 3 ай бұрын

CORRECTION: I misspoke when I said the guard plates for the enclosure took 20-30 minutes. These parts took around 52 minutes each to print.

@falxonPSN 3 ай бұрын

I love that your speaking pace is normal and not the chopped-up, no gaps garbage many people do these days. It is mentally exhausting listening to those never ending run on sentences for the attention span deprived. Instant subscribe.

@FigureFeedback 3 ай бұрын

Thanks for the subscription. I appreciate that!

@chriskim457 14 күн бұрын

For real

@darkskys163 3 ай бұрын

Just ordered mine today from Amazon because of your video. After all the discounts and after taxes got it under $299. Please do make more content on this machine.

@FigureFeedback 3 ай бұрын

I'm working on a new video now.

@webpro607 9 күн бұрын

do you like it so far? any issues?

@darkskys163 9 күн бұрын

@webpro607 no issues. Have over 300 hours on it now. I think I need to do some maintenance on it soon. Been using PLA and PETG filaments so far.

@webpro607 8 күн бұрын

@@darkskys163 which firmware do you have? Which version?

@darkskys163 8 күн бұрын

@@webpro607 version 2.4.5-2.2.3 , I’ve been to busy to update and it’s be printing well enough for me to want to update. I use a USB drive to transfer pint files onto my printer.

@F1DesignUS 3 ай бұрын

I bought one of these as a backup to my Creality K1. The K1 broke a couple of times and decided to go with a different brand and dude has this been a great purchase. It just works and does all I need with no fuss.

@popeshrek3548 3 ай бұрын

Massively helpful, video literally dropped just as I began to do some research on which printer to get as a beginner. Super concise and to the point 👌

@FigureFeedback 3 ай бұрын

Thanks a lot! Glad I could help.

@nlambert 3 ай бұрын

Awesome video!! I’ve been eyeballing a new printer for a long time and was excited to see this one. I tried finding reviews on the non pro 5m and found they were very limited, I did see someone say it was close to a P1S for half the price, so I said why not let’s try it for $299. I’m very impressed so far. I also put it in myself to create a basic video of walking through the first steps as I couldn’t find videos when I ordered it. Now it looks like others have made videos, and you have a well with some great production values. I’m glad more coverage is becoming available.

@802Garage 3 ай бұрын

Glad someone is shining a light on this! I think Flashforge did a great job listening to reviewers and buyers when they decided to go more open source and design. The 5M with the affordable printed enclosure kit as well as open Klipper is simply insane value for money.

@802Garage 3 ай бұрын

P.S. Great review. This was pretty comprehensive short of some kind of teardown! I think people should really consider this printer over the popular options. With a coupon this is about the same price as the Ender 3 V3 KE and I'd take this.

@blackcanyonmodelworx6060 3 ай бұрын

Thank you for doing this. I have 2 of the Bambu printers and was looking to add this specific printer to print mainly single color prints that I sell. You are so right, videos for this specific printer are not really out there on youtube. Love the very in-depth review you have done with this and look forward to seeing other videos you put out for this printer. Happy to be a new sub for you and your channel. Keep up the great content.

@user-qc8nw6jw2j 3 ай бұрын

Thank you for taking the time to make such a clear, easy to follow, beginner friendly review! Definitely subscribed

@FigureFeedback 3 ай бұрын

Thanks for the sub!

@darrengriffith9680 3 ай бұрын

Just ordered this today as a first printer. I agree there are so many opinions on entry level printers you go insane trying to choose one. I appreciate your endorsement of the flashforge.

@kilo.sierra 3 ай бұрын

I received mine Wednesday and I've been checking KZfaq every day in hopes of seeing new videos pop up!

@krishuhn2184 10 күн бұрын

Thank you for this very honest and concise review. It helped make up my mind to go ahead and get the Flashforge Adventurer 5M.

@johnkolman219 3 ай бұрын

Thanks for the video Jeremy. I've been on the fence about this printer and didn't know about the sweet deal on Amazon. I think I've made my decision!

@NoahBis 3 ай бұрын

this video is very high quality! Thank you for the informative review

@FigureFeedback 3 ай бұрын

Glad it was helpful!

@eaojnr Ай бұрын

you've pretty much provided the whole user guide and manual for the Flashforge folks - wow!! Great stuff. You got me to order! thanks

@KenPryor Ай бұрын

Thank you for this video! I just won one of these printers today and I have no previous experience with 3D printing. This video was very helpful!

@compency 3 ай бұрын

I've had mine for about 2 weeks. Printed the enclosure and it's amazing. Such an upgrade from my old bedslinger. And it's so fast!

@silentrice7399 3 ай бұрын

I just recently bought this printer a week ago. Super exciting to see someone actually review the non pro model

@Kenword69420 3 ай бұрын

I bought one last week and I absolutely love it. Took about 20mins from opening the box to setup and have something printed

@victorreyes351 3 ай бұрын

Great video btw!

@design8studio 3 ай бұрын

Thanks for the great video!

@carlreid7726 Ай бұрын

Just a quick message to say thank for your your reviews on this printer after watching your videos I upgraded my printer to the Adventurer Flashforge 5M and I'm really pleased with the printer, in the UK it's was almost half price of the Bambu Lab I was looking at. I've started printing the parts for the enclosure and now I'm using Orca slicing software with has more features, look forward to more videos.

@doukasphatskool9364 3 ай бұрын

bravo!!! excellent review!! nobody talks about this printer!!

@Thadopeera 3 ай бұрын

Interesting.. Glad to see that there’s another good option out here

@vincentcyr3719 Ай бұрын

Got one of those showing up today. Looking forward to making some photography gear and toys for my kid.

@KoreyMacGill 3 ай бұрын

Great video. I rocked an anet a8 and an anycubic chiron for 5 years a while ago. Sold em. Got out of the hobby. Feeling the itch but wanted a corexy. This is definitely goint on the birthday list. thank you for going over differences with pro version

@gunnarbiker Ай бұрын

Great review! I started with an Ender 3 Pro, and enjoyed it but felt extremely limited and, often frustrated. As a beginner, I felt aggravated at times at how hard it was to keep level. I also upgraded a lot of parts, including installing nylon bushings under the levelling knobs and the Micro Swiss Direct Drive Extruder. Yesterday (4/19), I "upgraded" (I hope) to the Flash Forge Adventurer 5M and hope to make more progressive prints. We'll see how that turns out. If it's successful, I may keep climbing the 3D printing ladder. As fiddly as the Ender 3 is, I will still keep printing smaller parts on it while my Flash Forge prints heavier duty stuff. I'm figuring it out as I go and videos like this help. I'm not in it to take over the 3D printing world, but to just to have some fun and make some props, and kits, that people can enjoy!

@billcs66 Ай бұрын

Thank you, for the info.

@JOE_GOMEZ777 20 күн бұрын

Thank you for the 5m content keep it coming brotha

@tbip2001 3 ай бұрын

Purchased this a couple of months ago snd it has worked out of the box flawlessly. I really wish they woyld make a 300 x 300 version!

@Cosanplayprops 3 ай бұрын

I have the flashforge resin printer an it's my go to, I just this printer an it works right out of thew box, I've not issues I love how fast it is. It does make a clicking noise but not all the time. Wish we had this when printers first came out.

@jaosnmedia5990 Ай бұрын

Great video the flash forge 5M I have seen people add a sealed plexiglass enclosure. Do you happen to have a video for that?

@harvilleDesign 2 ай бұрын

Thanks for the video! I just bought one on eBay from Flashforge for $240 + tax ($264 total) today! EBay has a 20% off coupon valid til the 17th and several 3D printers are accepting this coupon. I did the "make an offer" of $300 (tried less, but no-go) and they accepted, so add in the 20% off and got a great deal! Can't wait to print fast!!

@Hypernova-ug4ob Ай бұрын

great content thanks very much :)

@Tanner3D 3 ай бұрын

Great video, mine is arriving on Thursday so I've been watching as many videos on it as possible. I design toys and all my other printers are slower bed slingers that print great but I wanted something that could knock out a test print fast so I can test something I'm currently engineering and the sale price of this was just too good to pass up.

@Killswitch1411 3 ай бұрын

I have a Flashforge Adventurer 5M Pro and I was pretty surprised how good of a printer it has been. For me compared to the P1S I had more consistent prints from the get go from the 5M than the P1S. But you really cant go wrong with either. So it would come down the the Slicer and I guess you can use Klipper on the 5M now.

@LordReef 3 ай бұрын

Me suscribo. Es la mejor review que he visto de esta impresora. En mi país España.. no ha llegado el descuento. Pero parece que llegará en un momento u otro y la compraré. Enhorabuena por el canal de KZfaq, espero ver más vídeos tuyos de esta maquina. Saludos!!

@FigureFeedback 3 ай бұрын

¡Muchas gracias! Tendré más vídeos disponibles pronto.

@Adamhc75 3 ай бұрын

I looked long and hard at this printer.. I ended up picking up the Pro because I was able to get it for 489 plus tax on Amazon because of a 50 dollar savings and a 10% off coupon that Flashforge had on Amazon.. the same coupon was also available on the 5M, bringing it down to 270 before tax. So, a great deal on either model.

@derickstephenson2532 3 ай бұрын

I ordered mine 2 days ago, mainly because of this video man. You did an awesome job, and I hope mine works as well as yours seems to be. I do have a question on the filaments you used for the dragon and bust. Were they high speed PLA or regular ? And did they also print at 300 mm per second?

@FigureFeedback 3 ай бұрын

The dragon was not printed with high speed filament, but the bust was. I used default speeds for all the prints within FlashPrint.

@laurenpatnaude3336 2 ай бұрын

Great video! It is the reason I purchased this printer. I just got mine today and am already printing! Where would I find the file for the side spool holder?

@FigureFeedback 2 ай бұрын

Thanks! Here's the file: www.printables.com/model/707057-side-spoolholder-flashforge-adventurer-5m-fully-3d

@NomaddUK Ай бұрын

You really are an ambassador for this printer. I hope they recognise that and send you the enclosure for free. You deserve it. I bought this printer because of your videos and do not regret it. It arrived in TWO days. It was printing the test cube within half an hour. It won't print ABS though. I've tried everything. Could you try and make a video on it? I got it to stick to the bed using a raft but the layers won't adhere. It just lifts and cracks.

@NomaddUK Ай бұрын

Oh, and another thing. I emailed their support team about the profile for Simplify3d and being unable to print ABS and they replied next day. Very good service. Not tested their suggestions yet though.

@jsmith6599 8 күн бұрын

Problem with printer loosing it's position actually is very common to any machinery equipped with stepper motors with no feedback. From my years of experience with CNC milling machine tools, it may come from both mechanical or electronical reasons. 1) check if printer's head hits anything. 2) thoroughly clean the guides, ball-screw pairs and drop some oil on it. 3) if mechanics works perfectly well, check all connections of cables and wires going from drivers to stepping motors, plug them thighter into their sockets. 4) alternatively, try to lower the accelerations. 5) if all above didn't work, the problem may be with electronics and it this case there is little you can do. Unfortunately, the exact reason of errors in stepping motors is very hard to pinpoint. Even if problem is purely electrical, there is still a bumping sound im the moment the error occures and it may seems that mechanical parts is suddenly stuck or hit something.

@alysenaid4134 Ай бұрын

Very good video! Love how you talk (slow but not too slow and very clear). Now I've got a question: I'd love to print this cute dragon. Could you please tell, which model and which filament you used for it? :)

@FigureFeedback Ай бұрын

I believe this is the model I printed for the dragon: www.printables.com/model/733515-flexi-leaf-dragonprint-in-place. I used a generic blue-green silk filament. It doesn't even have a name on the spool. I think I got it from Temu.

@zravel 3 ай бұрын

Thanks for your video - I ordered it and was looking for someone who could give me a little bit of advance information.

@VenkatVisvanathan Ай бұрын

What filaments are recommended to buy along with the printer? like default ones and must haves

@shanepearce1629 2 ай бұрын

you can have the new filament in the Bowden tube ready to go on the one heat up

@elijahdayal8104 3 ай бұрын

Great video! Just a small question. How loud is the printer? I have a ender 3 with the silent motherboard and I want something that wont make too much noise.

@FigureFeedback 3 ай бұрын

The loudest thing about this printer are the fans. I'm not gonna lie to you, they're pretty loud.

@MrFord1947 3 ай бұрын

Can you show the usb camera add on and one you recommend

@Dylcifer 3 ай бұрын

$300 for a CoreXY machine is solid

@CaptCorpMURICA 3 ай бұрын

Waiting on mine from Flashforge directly. It’s going to be a great upgrade from my OG Ender 3.

@FigureFeedback 3 ай бұрын

Absolutely a huge upgrade!

@shanepearce1629 2 ай бұрын

the screen cable on mine did not plug in to the same spot as the video of replacing the screen

@DeRock401 3 ай бұрын

Might return the ender 3 v3 KE I got for my son and get him this one. He really is loving my bambu lab p1s combo , and I can’t get another one of those right now, so this might be a good option for him. Does it not hold 1kg spools tho? Some Amazon reviews are not good

@FigureFeedback 3 ай бұрын

This printer can hold 1KG spools easily.

@jwoodshed1108 3 ай бұрын

Did you print a benchy? Its nice to have that to compare with other printers quality.

@FigureFeedback 3 ай бұрын

I didn't print a benchy. I printed the torture toaster instead.

@420treeenthusiast 3 ай бұрын

LOVE THIS! Mine just showed up today! Could you point me in the right direction of that flexi dragon please?!

@FigureFeedback 3 ай бұрын

Sure! Here is a link to it: www.printables.com/model/733515-flexi-leaf-dragonprint-in-place/files

@420treeenthusiast 3 ай бұрын

@@FigureFeedback yo I appreciate you! 👊

@genericyoutuber3394 4 ай бұрын

Could you try to see how this printer does with TPU?

@FigureFeedback 4 ай бұрын

Sure can! I'll make a separate video about that.

@tsarrr 3 ай бұрын

Can you share the link to the lego storm trooper, that thing looks cool as

@FigureFeedback 3 ай бұрын

Yep, here's the link: www.printables.com/model/735734-big-bricks-stormtrooper-61-lego-inspired-figure-no

@ohfr20 2 ай бұрын

Buying this tomorrow 👌

@EsotericArctos 3 ай бұрын

Flashforge are one of the few companies that were making "works out of the box" printers for some time. Unlike Creality Enders that need modifications to make them work well. They won't reach the travel or print speeds in the small size of the build, but it is nice to see that on paper they can do it. People get a little too hung up on mm/s measurements as though it is the be all and end all. Smaller parts will never reach those theoretical speeds

@anthonylong5870 3 ай бұрын

There is NOTHING under $300 that comes even close to the value and quality you get with the 5M it really is the best plug n play printer under $500 on the market

@webpro607 9 күн бұрын

15:25 can you please provide a like where i can order this filament?

@nicdeen7482 3 ай бұрын

I have an adventurer 5m pro at work... It's /fine/. I have a THE100, voron2.4, k1, kobra 2 max at home and I like each of them more than the 5m pro, but none of them /just work/ like the 5m pro does. The 5M is a great printer if you want something that simply prints files. My 5m pro at work has ~250hrs of print time on it and maybe 1 or 2 failed prints in that entire time.

@3DGEOPrints 2 ай бұрын

Have you tried adding the open source version of clipper yet? If you do i think it will then let you use any slicer at that point and then you can write G code to change all the processes you said is a con. Sounds like another video 😉

@FigureFeedback 2 ай бұрын

I haven't tried flashing Klipper to the printer yet. I'm going to wait until some more testing has been done since the project is still new.

@rjakiel73 3 ай бұрын

Anyone know if this can be upgraded to a 300c extruder/hotend?

@NomaddUK Ай бұрын

I hope you used a little grease when you went round the back and stuck it up the other hole.

@Plzdontcrash 3 ай бұрын

Do you have a link for the klipper file. Ive search the Wike and cant seem to find it.

@FigureFeedback 3 ай бұрын

Here's the link to the firmware download page: www.flashforge.com/download-center/143

@dmonty2k Ай бұрын

Mine is arriving today. Where did you get the STL file for that dragon? Can you post a link to it? And the Torture Toaster? :)

@FigureFeedback Ай бұрын

Leaf dragon: www.printables.com/model/733515-flexi-leaf-dragonprint-in-place Torture Toaster: www.printables.com/model/60985-the-torture-toaster

@dmonty2k Ай бұрын

@@FigureFeedback Thanks for the quick response. I LOVE this printer. Coming from an Ender 3 Pro and Ender 5 - auto levelling, the awesome flexible build plate, the ease of switching nozzles - this one is amazing.

@SeanSR Күн бұрын

When are you gonna finish printing the enclosure for the 5M?

@FigureFeedback Күн бұрын

I just decided to start printing it again. I'm doing the first riser piece now.

@kylebyers9824 3 ай бұрын

Where abouts did you get that storm trooper STL from mate?

@FigureFeedback 3 ай бұрын

I got it on Printables. www.printables.com/model/735734-big-bricks-stormtrooper-61-lego-inspired-figure-no

@TC-wo7qs Ай бұрын

Just ordered mine, where do you get the STL for the enclosure kit? How much filament does it use and how ling does it take to make?

@TC-wo7qs Ай бұрын

Maybe I should watch the rest of the video lol

@FigureFeedback Ай бұрын

You can find the enclosure files here: wiki.flashforge.com/en/knowledge_corner/printer-mod-and-diy How long it takes is going to depend on your settings and the filament you use, but be prepared to go through a few 1kg rolls at least.

@DrewLSsix 3 ай бұрын

Tue ribbon cable reminds me of something i used to say about certain jobs, its not hard to do right but its really easy to do wrong. In other words, dont get complacent.

@kn0bs Күн бұрын

Can you please share where you got the model for the flexy dragon?

@FigureFeedback 23 сағат бұрын

I think it was this one: www.printables.com/model/413203-articulated-night-spirit-dragon

@jonsilliboy4251 3 ай бұрын

The dragon ball collection 🧐🔥

@FigureFeedback 3 ай бұрын

I've been loving Dragonball since elementary school.

@maotyrias 2 ай бұрын

I can confirm it's a good printer and cheap

@F.DoctorGT03. 3 ай бұрын

Très bonne vidéo , dommage que l on ne voit pas les impressions de plus près :)

@FigureFeedback 3 ай бұрын

Je viens de publier des photos plus rapprochées sur Instagram. instagram.com/p/C3I0FGwOCTf/?img_index=1

@F.DoctorGT03. 3 ай бұрын

aahhh super merci beaucoup@@FigureFeedback

@samygom 2 ай бұрын

How does an Elegoo Neptune 4 Pro stack up against this? It's not a coreXY design but seems to be a nice machine and I'm getting it cheaper than the 5M (about $270 after tax).

@FigureFeedback 2 ай бұрын

I have an Elegoo Neptune 4 Plus as well. I can tell you the 5M has been much more convenient. The 1-touch auto leveling saves a lot of time and frustration compared to the manual leveling you need to do with the Neptune. The Neptune also has a weird issue with not remembering the Z-offset whenever it's turned off. I also had to alter the flow rate due to over extrusion out of the box. The Neptune 4 isn't a bad printer, but it's not as beginner friendly as I was led to believe. I've made some nice prints on it. It just needs a little help to get there. I also like the fact that the Neptune runs Klipper and allows me to access the printer remotely from a browser.

@kellumin 3 ай бұрын

How did you get the hands to print on the logo man everytime I try to do so they fall over and mess up.

@FigureFeedback 3 ай бұрын

Try adding a brim to those parts in the slicer. That's what I did to get them to print properly.

@kellumin 3 ай бұрын

No sorry I've tried the brim and the raft right now I'm going super slow to see if that works

@Pouchey2 3 ай бұрын

The whole nozzle thing is my only red flag. I'm really tempted by this machine but my concern is that if they ever discontinue the nozzle assemblies, I'd be kinda screwed. It's not like I can just get a generic nozzle like I can do with something like the Ender V3 KE. How often do you actually need to change a nozzle? Is this a genuine concern? I'm really stuck between this and the V3 KE. It's currently only £30 more with the sale.

@FigureFeedback 3 ай бұрын

I totally understand your concern with the proprietary nozzles. How often you change it depends on how much you're printing. 24/7 usage with a variety of filaments may warrant 2-3 changes a year. But if you use it more casually, you can use it for longer. I'm going to eventually buy a spare to have on hand, and maybe get a larger nozzle for some comparisons.

@eliasYC 17 күн бұрын

I watched the whole duration of the video and my 5m is still nt even done with the second stage of set up calibration. :/

@LordKerry 2 ай бұрын

I have two of these, only problem is they print so fast, I am going through way more filament

@NewDadWhoDis 23 күн бұрын

How long did it take your kids to break the flexi-dragon and will it take my 4 year old a longer or shorter amount of time to break?

@FigureFeedback 23 күн бұрын

They weren't into the dragon, so it's still intact. But I printed a couple flexi Pokemon toys and they're going strong after a couple months. Ultimately it depends on the kid. Mine aren't too rough with toys.

@Antoan108 2 ай бұрын

Would you suggest this or the creality k1c? They are the same price for me.

@FigureFeedback 2 ай бұрын

Since they're the same price for you, I'd go with the K1C.

@Antoan108 2 ай бұрын

@@FigureFeedback thanks for letting me know. Could you say why?

@FigureFeedback 2 ай бұрын

Sure. The K1C is already enclosed, so you can print with more materials right away. It's also faster, has a larger build volume and includes a camera.

@Antoan108 2 ай бұрын

@FigureFeedback oh actually, i meant the flashforge 5m PRO and creality K1c are the same price for me. Do you still think the k1c is better?

@datboi8140 3 ай бұрын

You should have them make you a discount code, I purchased 2 from this video

@hansherrera6969 4 ай бұрын

link to the storm trooper

@FigureFeedback 4 ай бұрын

Right here: www.printables.com/model/735734-big-bricks-stormtrooper-61-lego-inspired-figure-no

@makidolfc 3 ай бұрын

How do you get the discount?

@FigureFeedback 3 ай бұрын

It was already marked down on Amazon. I didn't have to do anything extra.

@coff24 3 ай бұрын

I just bought mine , can you tell me how to turn down speed , would like to turn it down to 200 for better quality prints

@FigureFeedback 3 ай бұрын

You can change the print speed in the slicer software you're using. The steps are different depending on the slicer. It's probably set at 300mm/s by default for PLA.

@coff24 3 ай бұрын

@@FigureFeedback , thanks for the quick response, have one more question... does the usb slot on the side allow you to upload a file or is it just for connecting a camera

@FigureFeedback 3 ай бұрын

You can use the USB slot for both.

@coff24 3 ай бұрын

@@FigureFeedback , what brand of pla filament have you been using and what do you think works best for this printer

@FigureFeedback 3 ай бұрын

The blue filament I've been using is Jamg He High Speed PLA+. For grey, I used Creality Hyper PLA Pro. I'm currently using Elegoo Rapid PETG. I would suggest using high speed filament for PLA or PETG if you intend to print as quickly as you can.

@kungfooman 3 ай бұрын

I like open source and went with Prusa Mini+ - Flashforge doesn't allow you anything

@StasonKalbason 2 ай бұрын

Молодцом!

@terryprimamarketinginc 2 ай бұрын

Flashforge Adventurer 5M is better than the Anker Make M5c, only downside is the nozzle is not standard

@FigureFeedback 2 ай бұрын

I agree the nozzles are a bit of a tradeoff. But I love how easy it is to swap without getting tools out.

@carloslopez54976 3 ай бұрын

I had one of these. I sent it back. It failed every single print for a week straight. I have a 20 bed slinger print farm and I was considering replacing them all with one of these. My experience was horrible and support was useless and would not warranty it. Just kept blaming everything but their machine.

@FigureFeedback 3 ай бұрын

Yikes. I'm sorry to hear that.

@aloneinfiction4101 Ай бұрын

Is it good for helmets?

@FigureFeedback Ай бұрын

It's a bit too small for adult-sized helmets.

@antonkukoba3378 3 ай бұрын

You data is outdated, Orcaslice can print via wifi on AD5 too

@FigureFeedback 3 ай бұрын

Good to know. I'll give it a shot.

@ncmach1 Ай бұрын

5M Pro now $499

@user-qk6fk7wg5m 2 ай бұрын

I bought it on Aliexpress for 270 dollars.

@victorreyes351 3 ай бұрын

9:36 😂😂😂

@FigureFeedback 3 ай бұрын

😎

@photo_n_art 2 ай бұрын

If I see a hole I will stick something in it for sure 🤣🤣🤣

@murphdog8781 3 ай бұрын

thats what she said

@nastyku Ай бұрын

Man that thing looks like it's rocking A L O T when printing. Is that just cause your table?

@FigureFeedback Ай бұрын

Yes, the table isn't very sturdy and it's on carpet.

@nastyku Ай бұрын

@@FigureFeedback appreciate the feedback, I literally bought one while watching your video BTW lol.

@ericcxxxx 3 ай бұрын

not now it 399... find one for us poor people for under 200.....

@flat-earther 3 ай бұрын

5M pro costs 950-1300USD in israel/palestine

@YouRQ7XL 3 ай бұрын

It's 399$ not 299$...

@FigureFeedback 3 ай бұрын

It's currently $299.

@RizeAgainstHaterz 3 ай бұрын

@YouRQ7XL click on the $100 coupon off

@johnasleyw 3 ай бұрын

stop wasting your money with this brand

@anthonylong5870 3 ай бұрын

I WASTED my $1000 on a Bambu hunk of crap and I bought a Flashforge 5M...Guess which one has had the least amount of issues and also prints the best?........Hint* Not the bambu