1. Elmer's ProBond Advanced 2. Titebond II Permium Wood Glue 3. Gorilla Glue Clear (Gel glue) Don't use superglue or Elmer's wood glue. Saved ya 7 minutes.

im makign a prop sword and this was definetly very useful now i know to jsut use wood glue!

I really appreciated you doing this test! I have a Styrofoam project I’m doing and you answered all my questions. Thank you God bless from Colorado.

Excellent, thanks! Glad to know it just that easy. Would be interesting to see the three titebonds sidebyside and adding some clamping force.

Since the Elmer’s Probond Advanced is not available, I tried a test just like yours with a different multi-surface glue … the Titebond Quick & Thick Multi-Surface Glue. I pitted it against a wood glue I keep around … Titebond III Ultimate Wood Glue (which is one step up from the Titebond II Premium that you tested. Both glues worked perfectly on the styrofoam. When I tried to separate they both tore the styrofoam apart with no separation at the glue joint. I did apply just enough glue to cover the entire test strip bottom when the pieces were pressed together. But the Titebond Quick & Thick was thicker, though, so the test piece did not slip around as much when applying pressure.

Excellent Demonstration... good camera work too ~---- Thanks !

Thank you very, very, very much for this presentation. You're saving people time and money.

Thank you for the video it was just what I needed 💪🏽

I think adhesion is an easy job for these materials. Maybe the others perform better in 10 years? Or maybe it’s for control of the gap thickness between foam and wall? What assets should we worry about?

Thank you so much for doing this video!! Very very helpful!! 💕👍👏

We almost had to go running all over town to find glue for foam. You saved the day! I had tite bond on hand and now she’s got that crap everywhere! Lol

Top tier content as always, thank you for sharing!! I would be curious to see adhesive comparisons with the volume of adhesive controlled.

Thank you for making this! Helped tremendously in a bind.

Testing is at 2:35

Great demonstration ❤ How about the difference in their price tags? 🤝

My only criticism of your test is you put a lot more glue on the 1st 2 (elmers II and elmerd pro bond) and way less on the GG clear. Considering the small size of that gg clear bead it may have been the best. Also it would ve n8ce to see the results after 24 hours rather than 4 days. Otherwise great video. I'm impressed with that probond and elmers titebond II.

Thanks for the helpful information... 👍👍👍

Generally covered to which glue type to use but would have been a better test if you'd spread the glue over the piece and all were the same size, plus I'd have liked to see titebond 3 in there too as it's waterproof

Im trying to do a project and I have to attach EVA foam sheets to styrofoam but I don't know what to use. Will gorilla glue work to stick them together?

What about your standard Elmer’s school glue?

Videos like these should include the generic names of ingredients of the product so one can use nearest alternatives in markets where these brands are not available.

As mentioned earlier, can't find it anywhere! I am going to try a multi-surface glue from Titebond available at the home stores.

Well selected amdes😢signed and carried out. Do you have a link to the Gorilla Guru?

Does it need good air flow to dry/cure. I need to glue a finished filon(thin fiberglass) skin to 1 1/2" styrofoam. There will be minimal exposure to the air. Some, but not in the open like your samples. Thanks for posting

I have Titebond III, wondering how it will fare?

Your video made the Elmer's ProBond Advanced sell out. Can't find it anywhere. Wonder if they took it off the shelves for safety reasons or it is a discontinued item? Too bad, as I needed to glue some styrofoam and that stuff did great.

Has anyone done this experiment but with rubber on styrofoam?

Thx I needed this as my fursuit head has styrofoam ears :)

I have a question, would I be able to use that to glue rope onto the styrofoam?

What about hot glue

No actual styrene glue like Hold The Foam, UHU Por, Weldbond, PL300???

Where to buy that gorilla glue sir