The Best Laser Engraver with a Rotary Attachment

The Best Laser Engraver with a Rotary Attachment - xTool D1 Pro 10W Review

Рет қаралды 27,993

Жыл бұрын

Flashing Lights Warning: Video includes shots of the laser engraver in use, which flashes red and blue. Please be cautious if you are sensitive to flashing lights.
Checkout my review of the xTool D1 Pro, a 10 watt laser cutter with a rotary attachment, and a whole ecosystem of accessories. This is my full review after using this laser engraver for the last couple of months.
---------------------------------------------------------------------------
Find more information about the D1 Pro below:
xTool D1 Pro: www.xtool.com/products/portab...
xTool D1 Pro + Rotary Attachment: www.xtool.com/products/portab...
---------------------------------------------------------------------------
See other accessories below:
RA2 Pro (Rotary Attachment): www.xtool.com/products/xtool-...
Air Assist: www.xtool.com/products/xtool-...
Honeycomb Working Panel Set: www.xtool.com/products/honeyc...
---------------------------------------------------------------------------
Materials I used in my review:
Material Package: www.xtool.com/collections/mat...
Multicolor Anodized Aluminum Business Card Blanks: amzn.to/3yqYcbh
Stainless Steel Jewelry Blanks: amzn.to/3xQeNEo
Slate Coasters: amzn.to/3fo2Nnf
Stainless Steel Business Card Blanks: amzn.to/3BKDraC
Veg Tan Leather Bracelets: amzn.to/3rdNmjO
Basswood Plywood Sheets: amzn.to/3M7jEpy
LED Acrylic Lamp Base: amzn.to/3M7jFK8
Black Acrylic Sheets: amzn.to/3vZNV4c
---------------------------------------------------------------------------
👀 See my recommended printers, filament, and accessories on my Amazon Idea Lists!
🆕 3D Printing Equipment for Beginners: amzn.to/2PNblSL
⚡ 3D Printing Equipment for Intermediate Hobbyists: amzn.to/2OOuQOy
💯 3D Printing Equipment for Advanced Users - Liquid Resin SLA/DLP: amzn.to/2PpqWuK
🎁 See the TEVO Tornado on Amazon: amzn.to/2TnhQhn
🎥 Hoffman Engineering KZfaq/Video Equipment - See on Amazon: amzn.to/2O9oP9I
🆕 Microphone - Sennheiser XSW-D Lavalier Set w/ ME-II - amzn.to/2F6ORYY
Thank you to all my Patreons for helping make these videos possible.
Special thanks to my tier 2 and above patrons:
* Alexandra C.
* Aaref A.
* Carl
Christopher Hoffman
Hoffman Engineering
www.hoffman.engineering
#Laser #DiodeLaser #HoffmanEngineering

Пікірлер: 30

@jonahmiller7 10 ай бұрын

This is an excellent review. Wish other channels did it like this. 👍🏻

@graceland75 Жыл бұрын

I bought one based on your review, thank you

@lucidfxproductions Жыл бұрын

Hello, I have an tool D1 Pro and I lost the power supply cable. I tried reaching out to the customer service and they will not tell me the specs on the supply. Instead, they want me to spend money on their website and screenshot me buying nothing, than once I pay for nothing they will send out the part I need from a 3rd party source. It is very odd and they will not give me any information. Can someone please tell me the specs of their power supply and where I can get one?

@melindaavila8005 Жыл бұрын

Yes would love a rotary tool tutorial

@AlteredCarbons Жыл бұрын

hey man, im was really interested in a few machines and you have a TON of great info. im looking to engrave clear acrylic's to make led signs and small desk top lights. do you have any recommendations for something under 1000$ usd? i was looking at a Monport 40w and stumbled here. thanks

@michellemotta1032 25 күн бұрын

Hi, great video thank you. Just to be clear i can input my own artwork into the provided software to use? And is it a must to get the air compressor? Do you have a video explaining the software setup and what all the parameters mean? please. 🙏🏻

@JonLake 10 ай бұрын

Would you say it can cut 1/4 birch plywood? I'm looking for one that do !

@533lpunit 22 күн бұрын

Is there a laser engraver that can cut clear acrylics? Can’t you just leave the paper masking on the plexiglass to cut it ?

@janponsie1411 Жыл бұрын

hello i saw your video about the xtool d 1 pro .in there you talk about material library lightburn from jbrown 123 but i can't find this link. could you still put it on. thank you very much

@yumbelbass 2 ай бұрын

I see that it works with steel. Question: does it also work with sterling silver?

@HoffmanEngineering 2 ай бұрын

No, it won't work with silver. Stainless steel only works because it is a surface-level heating discoloration, it doesn't actually engrave or etch. Silver doesn't act the same way.

@5linetrader 2 ай бұрын

Do one on the rotary

@thefilthelement Жыл бұрын

I would be urging this 10w extensively for cutting cork for coasters but I don't see anywhere annoy it cutting cork, not just engraving

@syba3694 Жыл бұрын

Hi, thank youfor the great video! You talked about a link for a Library from a Lightburn user "J Brown 123" - cant find it in your description. 😊

@onebigmexaking2176 Жыл бұрын

Yeah I got a D1 also and was interested in dat library, did anyone find the link? Thanks for all the info

@onebigmexaking2176 Жыл бұрын

Link from JayBrown123s library for lightburn? Please!! 😊

@lucidfxproductions Жыл бұрын

@imanutnur7 Жыл бұрын

I bought a xTool D1 Pro Upgraded Laser Engraver after a frustrating connection with Makeblock after having issues with the laser quitting after about 20 minutes. I communicated with them over a 3-day period and finally sent it back to Amazon. How has yours been working?

@HoffmanEngineering Жыл бұрын

That is unfortunate, I'm sorry to hear that. I've had no connection issues during any of my tests. Most of my testing was with USB connection, with equal time in lightburn and creative space.

@BrianShrout Жыл бұрын

I had to download the drivers on my computer because when plugging the laser in, it wouldn’t automatically download. After that I’ve really had no issues with light burn or creative space

@HeliRy Жыл бұрын

Think this would be able to etch/engrave on a small mason jar? Those things have a pretty wonky shape to them, not sure if the fall off per quarter turn would be too much for the geometry of the software to cope with 🤷‍♂️

@HoffmanEngineering Жыл бұрын

Diode lasers don't handle glass well. There are techniques to work with glass, such as coating the surface with paint then engraving through the coating. It can be tough to get good results that way though, you'd have to do some experiments to see if the D1 Pro would work in that case. CO2 lasers can easily engrave glass though. As for the shape, the relatively flat faces would probably engrave well. The software wouldn't be able to account for the rounded edges though, if you tried to use the rotary attachment.

@chase_h.01 Жыл бұрын

@Hoffman Engineering im told if you put painters tape over top of the glass, that helps

@townmama Жыл бұрын

What other accessories should you have?

@HoffmanEngineering Жыл бұрын

A honeycomb cutting surface is a must have, makes life a lot easier. An Air Assist compressor is great for cleaner cuts with woods. Some sort of ventilation, whether that is an enclosure you can vent outside, or a HEPA filter designed for laser engraving. Other than that, experiment with different materials. Try some rubber stamp making, or engrave stones, or cut mirrored acrylic. If there's a particular type of material you use frequently, then there could be material specific accessories, like a good cutter for acrylics, or acrylic glues.

@user-cs9fn8qt3y Жыл бұрын

Can i cute vinily with this machine thank you

@HoffmanEngineering Жыл бұрын

You can, but you'll want to make sure it is "laser safe" vinyl. A lot of vinyl and heat transfer products contain chemicals like chlorine that is dangerous for laser cutting, so you can't just use many off-the-shelf vinyls. Laser safe ones will work though.