The BEST Miter Saw Dust Collection, Period

Рет қаралды 258,711

Жыл бұрын

Miter saws are one of the hardest machines to incorporate dust collection that actually works. This silicone boot, specifically designed for the DeWalt DW716 and DW716XPS, goes around the back of the blade and into the stock dust port, and is held on to the metal bracket right behind the blade with magnets. It allows the saw to be used for miters and bevels as well. While not tested yet, this should fit the newer DWS716 and DWS716XPS as well, and may fit the DW715 and DWS715, possibly with modification.
SILICONE MAT (Useful for Many Things) - amzn.to/3N2ZpLx
GET YOUR OWN DEWALT MITER SAW DUST COLLECTION BOOT HERE:
inspirewoodcraft.com/products...
DW716 ZERO CLEARANCE DUST COLLECTION - inspirewoodcraft.com/collecti...
DWS716 ZERO CLEARANCE DUST COLLECTION - inspirewoodcraft.com/collecti...
OR VISIT US ON ETSY
www.etsy.com/shop/InspireWood...
PATREON: / inspirewoodcraft
EMAIL: inspirewoodcraft@gmail.com
WEBSITE: www.inspirewoodcraft.com
INSTAGRAM: / inspirewoodcraft
Looking for DOUBLE SIDED PAPER TAPE, DISCOUNTED HIGH-QUALITY PEC COMBINATION SQUARES and overall great savings ALL THE TIME? Shop where I shop! lddy.no/go67
YOU CAN SAVE 10% ON STARBOND CA GLUES AND ACCELERATOR!
Use the code “INSPIRE10” at checkout! www.starbond.com
SAVE 10% ON THE BEST CIRCLE CUTTING JIGS HERE!
jaspertools.com/discount/INSPIRE
SAVE 10% ON OLIGHT FLASHLIGHTS, TACTICAL LIGHTS AND HEADLAMPS!
Use the code "INSPIRE10" at checkout! www.olightstore.com/?streamer...
BANGGOOD WOODWORKING TOOLS: www.banggood.com/marketing-Wo...
MY HAND TOOLS, POWER TOOLS, CAMERA GEAR AND MORE:
www.amazon.com/shop/inspirewo...
SOME OTHER VIDEOS YOU MIGHT BE INTERESTED IN:
A NO-NONSENSE WAY TO SHARPEN A CARD SCRAPER:
• The No-Nonsense Way to...
HOW TO MAKE THIN STRIPS ON THE TABLE SAW - • Throw Out Your Thin-Ri...
CHECK OUT MY TAPER SLED VIDEO HERE - • Unlimited Possibilitie...
HOW TO MAKE A MITERED HALF LAP PICTURE FRAME - • How to Make a Mitered ...
If you appreciate this content and would like to help give back FREE OF CHARGE, simply give this video a “thumbs up”, leave a positive comment, subscribe to Inspire Woodcraft’s KZfaq channel and SHARE THIS VIDEO with someone who you think would enjoy it. Some of the links that we’ve provided above are affiliate links. That means that when you make purchases through those links, we earn a small commission of the sale at no additional cost to you. While we do use affiliate links where we can, we only endorse products or services that we believe in. That commission is a big part of our income, which also goes back into making more videos, so by using the links you help support what we do and for that we are very grateful.

Пікірлер: 287

@InspireWoodcraft Жыл бұрын

GET YOUR OWN DUST COLLECTION BOOT HERE! inspirewoodcraft.com/product/dewaltdustcollection/

@KenSaylor Жыл бұрын

Will this fit the DWS779?

@mackim7582 Жыл бұрын

Will it fit on DWS779?

@InspireWoodcraft Жыл бұрын

@Ken Saylor @Mac Kim It will not, but I’m hoping to get one in the shop soon to see what I can do. A lot of requests for that saw specifically.

@checknate8820 11 ай бұрын

@@InspireWoodcraft yeah, just bought one today and it needs something like this

@JCarey27 11 ай бұрын

Dws780 pleaseeeeee!

@thedumbassspeaks Жыл бұрын

This is such an easy fix. It’s annoying that manufacturers haven’t done this already.

@TheFunnyCarpenter 3 ай бұрын

This is really cool. I just started working on a video about Miter Saw dust collection. I was making some shroud extension out of duct tape but your idea with the silicone mat and magnets is pretty awesome! I ordered some of the mat and am excited to try it out. I'll be sure to give you credit!

@Otto_Irving 11 күн бұрын

Please tell us if you can improve the dust collection on the kapex. I’d also be curious comparing dust collection with this style solution on the Dewalt, Milwaukee, Makita, and Festool.

@michaelbauer7023 11 ай бұрын

Here is a mini-review of using the actual product purchased from Inspired Woodcraft: By way of info, I use the exact same DW716XPS and made what I thought was a great dust contraption last year. It collected 80% to 90%... as a result I was very pleased for a while. However, it was limited to 90-degree and 45-degree cuts in order for it to work "perfectly" (and absolutely no bevels). I didn't think this would be a huge sacrifice, but I ultimately found myself limited by these constraints and started cutting into my contraption to make cuts other than 90 and 45 degrees (and had to use my table saw to cut compound bevels) Rather than make a new cap piece for my contraption that was nearly cut away over the past few months, I bought the $25 boot from Inspired Woodcraft. Yes, I could have made it, but I wanted to support our community and didn't want to jack around with test-fitting it for several hours (while going through several SF of material that would have cost a few bucks to start). The boot arrived quickly... it was professionally packaged and came with instructions that I skimmed but didn't read 🙂 In short, I installed the boot and it works great. Not as good as my other solution when I stuck to 90-degree and 45-degree cuts, but pretty close and this one gives me a full range of cuts (including bevels). All said; I consider this a much better solution overall. Note: My DW716XPS does not have a metal bracket around the blade (it's hard plastic). Because of this, I could not use magnets to hold it in place and I had to use the existing screws along with a couple of small washers to install the boot. Not a big deal, but I had to remove the blade so I could clamp the boot in place to mark/drill a couple of small holes in the boot. At the end of the day, this is a "first-world problem" that is easily solved. All and all, this is a very solid solution. If you have the same saw, support our community and place a $25 order from Inspired Woodcraft. You will literally spend about this much to make it yourself and it cost you at least 2 hours (probably more). If you don't have this saw, use the concept and cut your own knowing that it works. This is my two cents, take it for what it's worth... just know that this is based on real-world experience after making my own solution that took a fair amount of time to make (and is now in the trash). I hope this helps.

@falxonPSN Жыл бұрын

Pure genius. This is exactly why I love this channel!

@skippylippy547 Жыл бұрын

Yes - me too! 👍 He really is brilliant.

@davidyeo4302 Жыл бұрын

I'm really envious of your level of OCD... Taking the time / effort to figure out all this stuff is a great help to the rest of us! Please keep the instruction videos going!! We need real people on KZfaq!

@InspireWoodcraft Жыл бұрын

@David Yeo Thank you, David!

@cuebj Жыл бұрын

Not necessarily OCD. Engineering mind and training is a learned discipline that can be hindered by OCD. There's a modern tendency to label all attention to detail as OCD and/or autism. It undermines both the effort to develop focus and real effects of real OCD and autism spectrum

@davidyeo4302 Жыл бұрын

The OCD comment was based upon a joke from a previous conversation, not an assumption or diagnosis, but thanks anyway.

@RYwoodview Жыл бұрын

Thanks to videos with this kind of design, I've built up a similar collection hood for my SKIL SCMS from duct tape added to a basic shape from sheet rubber. It's an easy way to do this because you can just keep adding to it & shaping it until it's just right, and the layers you end up with keep the form intact.

@axion8788 Жыл бұрын

Hundreds have tried (see all of KZfaq) and only one has succeeded: Inspire Woodcraft!

@InspireWoodcraft Жыл бұрын

@Axion 😂

@axion8788 Жыл бұрын

@@InspireWoodcraft Thanks. My solution was to move the miter saw to the garage and only use it outdoors!🙃

@mattkrause6264 5 ай бұрын

That’s not true at all. Shop Nation has built an entire business around mitre saw dust collection and seems to be doing quite well at it development solutions for damn near every saw on the market

@jasondoust4935 Жыл бұрын

Congratulations on a really elegant design solution. It's always interesting to note that the simpler a thing looks, the more complex the design process.

@andrebartels1690 Жыл бұрын

This is a really good idea, perfectly made. Thank you for being so generous sharing it with us viewers.

@kailuasurfing 5 ай бұрын

This was the most cinematic dust collection video I have ever seen. Also, excellent trouble shooting! love it.

@privateryan3593 10 ай бұрын

Of all the videos I have been wading through to find the perfect soltuion, and trail and error attempts this is by far the best one that actually works. Simple and very effective, I have a makita drop saw and the placement allows me to slide the saw with no issues only results. THANK YOU :)

@marvinwilliams4223 Жыл бұрын

I just bought it from you due to you giving people the actual link to the item so they can do it themselves and I checked out your website and you included the shipping in the price. You are legit. I hope you stay that way no matter how big you get

@daifeichu Жыл бұрын

Thanks for showing this to us. I have the Dewalt DWS782. When I originally bought it I finally found an adapter in the plumbing dept to attach a shop vac hose to it. I was so happy but then I turned it on and the rubber part that is near the part being cut collapsed. What I ended up doing is building an enclosure with a hole on the side for the shop vac hose. It keeps the dust down in the shop but it's a bit too big.

@dirkbaumann9398 Жыл бұрын

Thank You for your video. I used a similar material as under-padding for the basement floor. I followed your video demonstration used paper from my printer and made the template. After two attempt the fit was perfect. The result for me is awesome. My Dewalt on the back has a soft plastic flap to guide the dust and my vacuum kept sucking the flaps in so I lined it with two way tape and it works very well for me and I am very happy. I have not yet tried the slider function, but I am happy since I am in the basement of my house.

@matiasparodi2217 Жыл бұрын

Bud! Thank you SO much for your time and dedication to fix this.

@BeneWoodworks Жыл бұрын

I love this design, so much better than building a large hood over the saw. You certainly always do inspire my friend! 👍👍

@ungoodwoodworker Жыл бұрын

Brilliant. Just got my silicon in, cut it, and attached it to my DCS361. The dust chute is non-ferrous, so I just drilled and tapped the 4 holes to 1/4 20. I have a ton of 10mm 1/4 20 bolts that are effectively to short for anything else, except attaching the silicon. I used the existing collection rubber to mark the holes on the silicon

@wendylambert809 7 ай бұрын

OMG thank you!! Just bought a really cheap saw so have to really improvise with a custom dust collection setup. This idea is PERFECT!!

@derschlotter5605 Жыл бұрын

I will try this on my Bosch Mitersaw. Thanks for explaining and showing us your solution 👍

@skippylippy547 Жыл бұрын

I have a Bosch as well. Going to try it this week.

@Duncwoods Жыл бұрын

This video was top quality. Lighting and everything to show the dust was on point! On top of that, this is the most basic idea, but so genius!

@BubbaLeroy Жыл бұрын

Way to go Jody! I’m actually considering changing my saw to yours now…. Shadow line, great dust collection, lots of power, sub festool price. Sounds like a winner to me!

@mburke1211 Жыл бұрын

Great videos showing the dust flow! Nice solution as well.

@ansonchristiansr9596 Жыл бұрын

Thank you for taking the time to make a very simply solution to one of the worst dust making tools in he shop! I'm looking forward to getting it installed!!!!! You are my favorite KZfaq woodworker I really like your channel because you don't wast a lot of words and you make complicated jobs very simple and easy to understand. Thank you

@InspireWoodcraft Жыл бұрын

@Anson Christian Sr. Thank you so much for such a kind comment and the support!

@coreyhiggins621 Жыл бұрын

Great job! I just ordered your dust collection device and I'm quite happy to learn I'm not the only one with a DW716. Love your videos and your innovation and I'm glad to see your marketing venture is expanding. You deserve it, and I'm happy to support you by purchasing this product. Thanks!

@georgeclark397 3 ай бұрын

😂 did u really think the dewalt built only one to sell to you only as a customer. GTFOH

@mitchd949 Жыл бұрын

This is good work and it shows how some observation and analysis can lead to simple and low cost solutions that work.

@homemadetools 2 ай бұрын

Clever solution, and it looks like it works perfectly. We shared this video on our homemade tool forum last week 😎

@MCsCreations Жыл бұрын

Brilliant, dude! Really well done! 😃 My miter saw isn't a Dewalt, but I'm definitely going to try something like that! Stay safe there with your family! 🖖😊

@RobFarmsFS Жыл бұрын

Great video. To the point. I use this saw as my daily driver installing cabinets. I just ordered a boot. Thank you.

@msk3905 5 ай бұрын

Made this like a year ago for my miter saw, works very well and bought a mat on Amazon for under $10

@jascotx 6 ай бұрын

Very elegant solution!! Happy to have bought one from you as you deserve to profit from this innovation. THANK YOU for sharing.

@BobBlarneystone Жыл бұрын

Indeed, a public service. I'll give a go at doing something similar for my radial saw. By the way, a provisional patent for an individual costs only $200.

@j.u.c.o Жыл бұрын

Actually only $75 as a micro entity

@vikingroots6850 10 ай бұрын

Used this principle on my Ryobi sliding miter saw. It works like a charm. Tapped some screw holes for the silicone boot into the metal frame. Can't thank you enough for the video!

@ballansmithphoto 3 ай бұрын

I was considering using Velcro since my Ridgid isn’t magnetic at that point. Don’t know why I didn’t think about tapping it for short screws. You gave me a reason to buy that tap & die set I’ve been eyeballing and couldn’t justify

@buckeye25osu 2 ай бұрын

How well is this working for you? I have a Ryobi 10 inch sliding saw. If it works great and you have similar do you mind sharing dimensions?

@scorpiorysing Жыл бұрын

Awesome, just what I have been looking for, and simple. Just ordered one!

@inspiringbuilds Жыл бұрын

Nice job, most won't appreciate the time and effort put into the modifying, trial testing, and content creation. I used tool drawer liner years ago with the same concept, but like you said it's not 100%. Keep up the great work.

@readeral 11 ай бұрын

This is SO good. Super keen to go inspect the mitre saws I use regularly to see if a magnet solution will work.

@jamescollier2049 Жыл бұрын

Man just ended a wood working blight single handedly. Bravo!

@patty109109 4 ай бұрын

Looks good. I had to do my basement recently, and I built a box around the saw with foam sheets. In the back is a box fan in front of a filter to create negative pressure for the dust. It’s bulky but works very very well. Requires somewhat regular cleaning but I bet it captures more than this even 😌

@recklesspalate8243 Жыл бұрын

Videos are looking pro, man! Brilliant design on the dust boot too!

@zachgoestoeuro Жыл бұрын

This is great. Literally at the perfect time for me as I’m trying to figure this piece out in my shop DC task.

@jeffkowalski4936 Жыл бұрын

I used oatey brand shower pan liner used for showers, it is 40 mils thick and can be bought in the plumbing section at the orange home center. I use it on a lot of tools, including the table saw.

@langrock74 Жыл бұрын

Would you mind linking to the product you used? Thanks

@wendylambert809 7 ай бұрын

Thanks!!!

@weekendwarrior9570 5 ай бұрын

excellent VIDEO. THANK YOU FOR THE DETAILS.

@jhans3278 Жыл бұрын

Thanks for the tip. However, I just hook-up my CamVac dust extractor to the two factory dust ports of my Makita LS1019L by using a 4” to 2x2” adapter. The CamVac has a 4” inlet. From the adapter, 2” flex hose runs to each port. Because of the high suction of the CamVac, all I need to use is one of the three vacuum motors to capture the dust.

@user-ps1iq9pk6b Ай бұрын

this is brilliant. great creativity

@davids8493 Жыл бұрын

As usual, absolutely brilliant! 👍👍

@aftermath2333 Жыл бұрын

I love the video cameras angles lightning good work.

@makermark67 Жыл бұрын

Your brain works on a different level, Jodee. Great solution!

@pmdinaz Жыл бұрын

Nicely done!

@patmason7276 5 ай бұрын

The saying is true necessity is the mother of all inventions. Easy and effective.

@jerryloughney4757 Жыл бұрын

Your vids of late are on fire!! Please keep up the great work.

@foxhallww311 5 ай бұрын

I bought this product and it's fantastic. It is as advertised.

@g-batts5565 Жыл бұрын

Brilliant! A while back I tried building some rigid shrouding and after watching this video I'm thinking to myself - well duh! My order is on its way!

@hansangb Жыл бұрын

Just ordered it. More to support your channel than anything else. I found Chris Harpsters video and created a shroud. But it was a pain in the ass to install. Your magnet approach is so much easier! And I like the little tabs you added.

@benchtopwoodworks Жыл бұрын

I tried magnets years ago when prototyping, but couldn't get them to hold properly. I should've kept trying different types! He's got a great solution and the silicone is a great innovation.

@hansangb Жыл бұрын

@@benchtopwoodworks Been using your modification for some time now. Works really well. TY

@RonMarshallrone Жыл бұрын

Brilliant! I will def buy one!

@uprightfossil6673 5 ай бұрын

Great advanced design. I used a chopped up gallon milk jug for years and still do

@brewster2188 5 ай бұрын

Brilliant idea

@CustomDartCabinets Жыл бұрын

I just bought a saw with OEM dust collection that works - Makita / Milwaukee and Festool all have very effective collection. Dewalt has always been horrendous and I never figured out why they couldn’t do better… I guess they just don’t care. You did come up with a great option here though so I commend you for doing what well paid engineers at DeWalt just didn’t care enough about.

@benkilgore 5 ай бұрын

Please don't blame engineers for economic decisions. Engineers solve technical problems within constraints.

@TuanNguyen-iw7yg Жыл бұрын

Great work!

@chinox7116 Жыл бұрын

Great stuff as usual 👍

@michaelrobinson9643 Жыл бұрын

Nice to see your ingenuity. I design and sell dust collection parts as well and some of mine for trim routers etc make for near perfect dust collection and improved stability. For the cost involved I don't understand why the default inclusions are not superior to what we receive - especially since they often do not work well for the orientation of the items primary use (eg routers collecting above the base). You have near completely overcome the issue on the saw for negligible cost. If we accept liability is a key reason brands don't do more we can consider: 1. What are the potential adverse outcomes of this being present on the tool? 2. What is the likelihood of each adverse outcome? 3. What is the consequence of each? From this we determine what we call "Significance" in design engineer speak. What's your breakdown on the presence of this shroud in proximity to the blade and stock in its current configuration with the magnet fixing system?

@samlutz4724 7 ай бұрын

This video has beautiful choreography

@AmbienceAcabamentos Жыл бұрын

amazing project!

@robw95 Жыл бұрын

That's pretty dang clever, I predict that you are going to sell out of these quite quickly! Well done!

@vicbutera1 7 ай бұрын

Perfect solution!

@klaymoon1 Жыл бұрын

Great innovation! I hope you can sell your design to one of the big manufacturers!

@dean9498 Жыл бұрын

Have you thought about selling a downloadable pattern ? Like a .pdf file maybe?

@ryanm2214 Жыл бұрын

Yes thank you sir! Much better way than some gigantic enclosure that I still have to clean out.

@-fazik-3713 Жыл бұрын

WOW! Thanks!

@adsctba 3 ай бұрын

Great job, tanks for share

@michaelrubin4747 7 ай бұрын

Fantastic idea. Most of us just accept the design and deal with the sawdust with the dustport at the back and the mess that follows. Do you have any idea how different the dewalt 780 is to the 716? Thank you for making the video(s) and sharing all the knowledge with us all.

@jimrosson6702 Жыл бұрын

Great video

@monochet Жыл бұрын

Need one of these for my 780!!

@robthewaywardwoodworker9956 Жыл бұрын

Awesome stuff.

@jonathanbolding4164 8 ай бұрын

Dude, That is brilliant!!!! Its always the simple things, Huh?

@pharaohacura3618 5 ай бұрын

i have a kitchen over the range exhaust hood mounted above my miter saw station…the dust is sucked into the exhaust hood and exits into one of my Kirby Vacuum bags…works really well 😂😂😂

@kevinthomson6324 7 ай бұрын

I’ve been waiting patiently for shop nation to get around to making a kit for this saw. Looks like you’ve beat him to market lol.

@wesandell Жыл бұрын

I made something almost identical for my cheap harbor freight miter saw by using several layers of duct tape to create the "mat". It works pretty well, it's fairly rigid, but also flexible when I bring the saw down and it's just duct taped onto it. I saw a video about it awhile back so I can't take credit for the design, but it works great and significantly reduces the dust.

@wendylambert809 7 ай бұрын

Would that happen to be the 10" chicago electric? If so, can u send a pic of what u did?

@wesandell 7 ай бұрын

@@wendylambert809 it's the 12 inch one

@lawrenceogden3736 Жыл бұрын

Brilliant also subscribed

@garytompkins3761 Жыл бұрын

Excellent solution. Thank you for linking the mat, could you do the same for the magnets?

@InspireWoodcraft Жыл бұрын

@Gary Tompkins I'm working on finding a source for magnets. I salvaged mine from an old tool holder I wasn't using anymore.

@mikedurkee7296 Жыл бұрын

Brilliant! Just freaking brilliant! Do you think this design would work on the DWS779? The sliding portion introduces a bit of a head-scratcher for me. Keep up the great work

@brenperkins3117 Жыл бұрын

This was my first thought; I clicked the link to buy the hood (shroud? Boot? Freaking floppy thing) but it doesn’t say if it would fit the 779. Jody, you’ll make easy money if you make one to fit the DWS779.

@mikedurkee7296 Жыл бұрын

@@brenperkins3117 I would be on that list for sure

@jschlensker Жыл бұрын

Wow, some competition for Shop Nation and his 3D printing army. Honestly, I would buy if it worked for the DWS 779/780. "Shut Up and Take My Money"

@klmn19 Жыл бұрын

From the same group, I'd take it for my DWS780.

@kylesala6507 Жыл бұрын

I don’t think it would easily work. The 779 has a plastic chip guard, so magnets won’t work there and I wouldn’t attach any hardware the plastic. Maybe there is a metal version of that chip guard. Also the 779 already has a dust shroud so that would likely need to be removed.

@davidfriedman3962 4 ай бұрын

Thank you, I will order. Is that a Festool vacumn hooked up to dust port?

@TknJn Жыл бұрын

brilliant innovation & thanks for sharing! question: any ideas what hardness on the Shore A scale the sheet is?? (durometer measurement) going to an 'old boys rubber shop' in the UK today to try & Source... cheers! :-j

@kennytam9514 5 ай бұрын

Great job. Does it work for a sliding compound saw? If yes, do you have one boot for Matabo 10 inch compound saw?

@glueupsscrewups Жыл бұрын

So clever!

@theAVguy808 Жыл бұрын

Great design. When I get home later this week I’ll check which model I have. Where did you get the vac hose you have connected to the saw?

@christopheralverson6278 Жыл бұрын

That's a Festool hose

@Connorkmiec93 Жыл бұрын

I just got a new DWS716XPS and it came with 'shroud' similar to yours, much smaller though. I did (5) test cuts in a 2x4 and it captured 77% of the dust using just the dust bag, which surprised me. Did you take any measurements?

@jaynecobb4964 11 ай бұрын

What a great invention! I have a dws 779 (sliding) so I just bought the material. Running into some frustration. I am fine if it doesn’t work well when sliding. But has anyone made something similar for a dewalt slider?

@stephenzello3519 Жыл бұрын

I just ordered one. Source for the magnets?

@nattybyrne Жыл бұрын

looks good, i may have to look at how i make for my Bosch gcm 12 gdl

@benchtopwoodworks Жыл бұрын

I've made some improvements to my GCM12SD, soon for the GDL. Don't hesitate to reach out if I can help!

@Therealphantomzero 6 ай бұрын

Definity need to try this on my metabo HPT 10 inch miter saw.

@chrisvanderwielen1530 11 ай бұрын

I just got mine yesterday, and it's a night and day difference. Worth the 25ish bucks. It was either that, or I was dropping 1500 on the Festool, because dust is a huge issue in the garage, with all the kids toys being stored there as well.

@InspireWoodcraft 11 ай бұрын

@chrisvanderwielen1530 Sweet! Hey thanks for coming back and leaving a comment with your experience!

@chrisvanderwielen1530 5 ай бұрын

@@InspireWoodcraftSo, I just ordered another one from you. I did a 45 miter, and it got eaten by the blade. I have to be more careful with opening up the upper fence on the saw before attempting that -- it pinched the hood bent it out into the blade path.

@jaromy03 Жыл бұрын

Most of the miter saws I've worked with actually have this by default.

@user-zx1cr9lx9p Жыл бұрын

Nice

@ChrisHersh42 Жыл бұрын

I need to upgrade my whole miter setup. Do you like this saw? Seems like a good value. 90% sure I'll get the 716xps and your dust boot and call it a day. Easy!